Skip to contentSkip to conversation

ipmitool raw set LAN configuration parameters command has no response code

DISCUSSION xiuzhi 1 participant 1 message Nov 22, 2018

lore
Share & tools
lore

xiuzhi

author
#0 lore raw

Hi all,
I use ipmi-kcs to communicate to host .
1, Get IP:
[root@localhost Packages]# ipmitool -v raw 0xc 0x2 0x1 0x3 0 0 Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Invalid Get PICMG Properties response length 1 Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid response length 1
Discovered IPMB address 0x0
RAW REQ (channel=0x0 netfn=0xc lun=0x0 cmd=0x2 data_len=4) RAW REQUEST (4 bytes)
01 03 00 00
RAW RSP (5 bytes)
11 c0 a8 c8 84

2, Set IP:
[root@localhost Packages]# ipmitool -v raw 0xc 0x1 0x1 0x3 192 168 0 100 Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Invalid Get PICMG Properties response length 1
Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid response length 1
Discovered IPMB address 0x0
RAW REQ (channel=0x0 netfn=0xc lun=0x0 cmd=0x1 data_len=6) RAW REQUEST (6 bytes)
01 03 c0 a8 00 64
RAW RSP (0 bytes)

BMC side : kcsbridged --v --d="/dev/ipmi-kcs3":
Opening /dev/ipmi-kcs3
Creating timer fd
Entering polling loop
Processed 1 dbus events
Processed 1 dbus events
Processed 1 dbus events
Processed 1 dbus events
Processed 1 dbus events
Processed 1 dbus events
Processed 1 dbus events
Recv req msg -> seq=0x01 netfn=0x06 lun=0x00 cmd=0x01
Send rsp msg <- seq=0x01 netfn=0x07 lun=0x00 cmd=0x01 cc=0x00 Processed 1 dbus events

Recv req msg -> seq=0x02 netfn=0x2c lun=0x00 cmd=0x00                        Send rsp msg <- seq=0x02 netfn=0x2d lun=0x00 cmd=0x00 cc=0x00        Processed 1 dbus events                                                         
Recv req msg -> seq=0x03 netfn=0x2c lun=0x00 cmd=0x00                        Send rsp msg <- seq=0x03 netfn=0x2d lun=0x00 cmd=0x00 cc=0x00        Processed 1 dbus events                                                         
Recv req msg -> seq=0x04 netfn=0x0c lun=0x00 cmd=0x01                        Send rsp msg <- seq=0x04 netfn=0x0d lun=0x00 cmd=0x01 cc=0x00        Processed 1 dbus events

We can see the response: none ,and set BMC IP failed. But I can set BMC IP successful by command:
ipmitool lan set 1 ipaddr 192.168. 0.100
why?

Best,
xiuzhi