Skip to contentSkip to conversation

FireWire update

GIT PULL Stefan Richter 1 participant 1 message Nov 7, 2007 Firewire

lore
Share & tools
lore
#0 lore raw

Linus, please pull from the for-linus branch at

    git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git for-linus

to receive the following fix for a regression since 2.6.24-rc1. (Or apply from this e-mail.)

 drivers/firewire/fw-sbp2.c |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)

Stefan Richter (1):
firewire: fw-sbp2: fix refcounting

Full log and diff:

commit 7c45d1913f0a1d597eb4bc3b2c962bc2967da9ea

Author: Stefan Richter <[email protected]>
Date:   Wed Nov 7 01:11:56 2007 +0100

firewire: fw-sbp2: fix refcounting

Since patch "fw-sbp2: use an own workqueue (fix system responsiveness)" increased parallelism between fw-sbp2 and fw-core, it was possible that fw-sbp2 didn't release the SCSI device when the FireWire device was disconnected.

This happened if sbp2_update() ran during sbp2_login(), because a bus reset occurred during sbp2_login(). The sbp2_login() work would [try to] reschedule itself because it failed due to the bus reset, and it would _not_ drop its reference on the target. However, sbp2_update() would schedule sbp2_login() too before sbp2_login() rescheduled itself and hence sbp2_update() would take an additional reference. And then we would have one reference too many.

The fix is to _always_ drop the reference when leaving the sbp2_login() work. If the sbp2_login() work reschedules itself, it takes a reference, but only if it wasn't already rescheduled by sbp2_update().

Ditto in the sbp2_reconnect() work.

The resulting code is actually simpler than before: We _always_ take a reference when successfully scheduling work. And we _always_ drop a reference when leaving a workqueue job. No exceptions.

drivers/firewire/fw-sbp2.c +7 -4
index 5596df6..624ff3e 100644
@@ -650,13 +650,14 @@ static void sbp2_login(struct work_struct *work)
 	if (sbp2_send_management_orb(lu, node_id, generation,
 				SBP2_LOGIN_REQUEST, lu->lun, &response) < 0) {
 		if (lu->retries++ < 5) {
-			queue_delayed_work(sbp2_wq, &lu->work,
-					   DIV_ROUND_UP(HZ, 5));
+			if (queue_delayed_work(sbp2_wq, &lu->work,
+					       DIV_ROUND_UP(HZ, 5)))
+				kref_get(&lu->tgt->kref);
 		} else {
 			fw_error("failed to login to %s LUN %04x\n",
 				 unit->device.bus_id, lu->lun);
-			kref_put(&lu->tgt->kref, sbp2_release_target);
 		}
+		kref_put(&lu->tgt->kref, sbp2_release_target);
 		return;
 	}
 
@@ -914,7 +915,9 @@ static void sbp2_reconnect(struct work_struct *work)
 			lu->retries = 0;
 			PREPARE_DELAYED_WORK(&lu->work, sbp2_login);
 		}
-		queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5));
+		if (queue_delayed_work(sbp2_wq, &lu->work, DIV_ROUND_UP(HZ, 5)))
+			kref_get(&lu->tgt->kref);
+		kref_put(&lu->tgt->kref, sbp2_release_target);
 		return;
 	}
 
Signature · 3 lines
Stefan Richter
-=====-=-=== =-== --===
http://arcgraph.de/sr/