firewire: fw-sbp2: fix for SYM13FW500 bridge (Datafab disk)
PATCH 1/1 firewire: fw-sbp2: fix for SYM13FW500 bridge (Datafab disk)
Fix I/O errors due to SYM13FW500's inability to handle larger request sizes. Reported by Piergiorgio Sartor <[email protected]> in
https://bugzilla.redhat.com/show_bug.cgi?id=436879
--- drivers/firewire/fw-sbp2.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/firewire/fw-sbp2.c +5 -0
@@ -327,6 +327,11 @@ static const struct { .model = ~0, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, +/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { + .firmware_revision = 0x002600, + .model = ~0, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + },/* * There are iPods (2nd gen, 3rd gen) with model_id == 0, but
Signature · 3 lines
Stefan Richter -=====-==--- --== -=-== http://arcgraph.de/sr/
PATCH 1/1 ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)
Fix I/O errors due to SYM13FW500's inability to handle larger request sizes. Reported by Piergiorgio Sartor <[email protected]> for firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879
This fix is necessary because sbp2's default request size limit has been lifted since 2.6.25-rc1.
--- drivers/ieee1394/sbp2.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/ieee1394/sbp2.c +5 -0
@@ -376,6 +376,11 @@ static const struct { .model_id = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, +/* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { + .firmware_revision = 0x002600, + .model_id = SBP2_ROM_VALUE_WILDCARD, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, + },/* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model_id = 0x000021,
Signature · 3 lines
Stefan Richter -=====-==--- --== -=-== http://arcgraph.de/sr/
Re: [PATCH] ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)
Quoted 8 lines · Stefan Richter
Fix I/O errors due to SYM13FW500's inability to handle larger request sizes. Reported by Piergiorgio Sartor <[email protected]> for firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879
This fix is necessary because sbp2's default request size limit has been lifted since 2.6.25-rc1.
Signed-off-by Stefan Richter <[email protected]>
Signature · 2 lines
Jarod Wilson [email protected]
Quoted 5 lines · Stefan Richter
Fix I/O errors due to SYM13FW500's inability to handle larger request sizes. Reported by Piergiorgio Sartor <[email protected]> in
https://bugzilla.redhat.com/show_bug.cgi?id=436879Signed-off-by Stefan Richter <[email protected]>
Signature · 2 lines
Jarod Wilson [email protected]