MCE: The hardware reports... (AMD Duron)
Under both 2.6.0test4 and test6, I'm fairly regularly getting the following at boot time:
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0: e603800000000175
The machine is a Compaq Presario 711, with a 950MHz Mobile Duron (family 6 model 7 stepping 1 according to /proc/cpuinfo).
The Intel docs seem to imply that this is something memory-related, I couldn't find the relevant AMD docs.
Would somebody be so kind as to explain what the above means?
Thanks,
Juliusz Chroboczek
P.S. I will try to check the list archives, but would appreciate it if
you could CC me with any reply.
Hi Juliusz!
Quoted 6 lines · Juliusz Chroboczek
Under both 2.6.0test4 and test6, I'm fairly regularly getting the following at boot time:
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0:
e603800000000175
Quoted 7 lines
The machine is a Compaq Presario 711, with a 950MHz Mobile Duron (family 6 model 7 stepping 1 according to
/proc/cpuinfo).The Intel docs seem to imply that this is something memory-related, I couldn't find the relevant AMD docs.
Would somebody be so kind as to explain what the above means?
In the sources it says:
/* AMD K7 machine check is Intel like */
So I guess the information you find about Intel Machine Check Exceptions concerning your MCE also applies to AMDs.
Greetings,
Axel
____________________________________________________________________________
Axel Siebenwirth phone +49 3641 776807 |
Am Birnstiel 3 axel at pearbough dot net |
07745 Jena |
Germany________________________________________________http://pearbough.net |
I either want less decadence or more chance to participate in it.
____________________________________________________________________________
Quoted 6 lines · Juliusz Chroboczek
Under both 2.6.0test4 and test6, I'm fairly regularly getting the following at boot time:
MCE: The hardware reports a non fatal, correctable incident occurred on CPU 0. Bank 0:
e603800000000175
Quoted 7 lines
The machine is a Compaq Presario 711, with a 950MHz Mobile Duron (family 6 model 7 stepping 1 according to
/proc/cpuinfo).The Intel docs seem to imply that this is something memory-related, I couldn't find the relevant AMD docs.
Would somebody be so kind as to explain what the above means?
Probably spurious, a fix was merged on the 29th. Test6 came out on the 28th, so just missed...
Dave
Signature · 1 line
Dave Jones http://www.codemonkey.org.uk