Problems with Promise IDE controller under 2.4.1
We experience trouble with the Promise (PDC20265) IDE controller and seven 75GB IBM disks on a single CPU (Pentium-III) server.
Linux 2.4.1 fails to detect correct geometry for the four last disks (identified as hde, hdf, hdg, hdh).
[root@nngds1 /root]# cat /proc/ide/hd[abcefgh]/geometry
physical 148945/16/63 logical 9345/255/63 physical 148945/16/63 logical 9345/255/63 physical 148945/16/63 logical 9345/255/63 physical 148945/16/63 logical 148945/16/63 physical 148945/16/63 logical 148945/16/63 physical 148945/16/63 logical 148945/16/63 physical 148945/16/63 logical 148945/16/63
Output from hdparm -i /dev/hd[abcefgh]:
/dev/hda:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAL154 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdb:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAR909 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdc:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAS836 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hde:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAL701 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdf:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAR606 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdg:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAL151 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdh:
Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAR624 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
---
Two types of disks:
(geometry of the first is correctly detected, the second isn't)
[root@nngds1 /root]# hdparm /dev/hda
/dev/hda:
multcount = 0 (off) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on)
geometry = 9345/255/63, sectors = 150136560, start = 0
[root@nngds1 /root]# hdparm /dev/hde
/dev/hde:
multcount = 0 (off) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on)
geometry = 17873/16/63, sectors = 150136560, start = 0
The machine runs RedHat 7.0 with RHN upgrades if it means anything.
Signature · 6 lines
Ole Aamot mailto:[email protected] LinPro AS http://www.linpro.no - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/
There is not problem, the BIOS in the addon cards/promise do not translation for you like the mainboard does.
If you are worried pass the geometry by hand
hd{e,f,g,h}=9345,255,63
Cheers,
Quoted 132 lines · Ole Aamot
We experience trouble with the Promise (PDC20265) IDE controller and seven 75GB IBM disks on a single CPU (Pentium-III) server.
Linux 2.4.1 fails to detect correct geometry for the four last disks (identified as hde, hdf, hdg, hdh).
[root@nngds1 /root]# cat /proc/ide/hd[abcefgh]/geometry
physical 148945/16/63 logical 9345/255/63 physical 148945/16/63 logical 9345/255/63 physical 148945/16/63 logical 9345/255/63 physical 148945/16/63 logical 148945/16/63 physical 148945/16/63 logical 148945/16/63 physical 148945/16/63 logical 148945/16/63 physical 148945/16/63 logical 148945/16/63Output from hdparm -i /dev/hd[abcefgh]:
/dev/hda:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAL154 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdb:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAR909 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdc:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAS836 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hde:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAL701 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdf:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAR606 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdg:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAL151 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
/dev/hdh:Model=IBM-DTLA-307075, FwRev=TXAOA50C, SerialNo=YSDYSFAR624 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=40 BuffType=DualPortCache, BuffSize=1916kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=150136560 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5---
Two types of disks:
(geometry of the first is correctly detected, the second isn't)[root@nngds1 /root]# hdparm
/dev/hda
/dev/hda:multcount = 0 (off) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on)geometry = 9345/255/63, sectors = 150136560, start = 0
[root@nngds1 /root]# hdparm
/dev/hde
/dev/hde:multcount = 0 (off) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on)
Quoted 9 lines
geometry = 17873/16/63, sectors = 150136560, start = 0
The machine runs RedHat 7.0 with RHN upgrades if it means anything.
Signature · 2 lines
Ole Aamot mailto:[email protected] LinPro AS http://www.linpro.no
Andre Hedrick
Linux ATA Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Talking of the Promise are there any plans to support re-enabling of the 2nd channel for boards which have an on-board FastTrak?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Paul Flinders
Talking of the Promise are there any plans to support re-enabling of the 2nd channel for boards which have an on-board FastTrak?
FastTrak == Ultra - Fake-RAID
Cheers,
Andre Hedrick
Linux ATA Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines · Andre Hedrick
Quoted 2 lines · Paul Flinders
Talking of the Promise are there any plans to support re-enabling of the 2nd channel for boards which have an on-board FastTrak?
FastTrak == Ultra - Fake-RAID
But Fake-RAID is CHEAP to get two additional UDMA-5 capable channels :-) Just jumper for normal ATA/100 mode.
Signature · 5 lines
Matthias Andree - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Matthias Andree
Quoted 6 lines · Andre Hedrick
Quoted 2 lines · Paul Flinders
Talking of the Promise are there any plans to support re-enabling of the 2nd channel for boards which have an on-board FastTrak?
FastTrak == Ultra - Fake-RAID
But Fake-RAID is CHEAP to get two additional UDMA-5 capable channels :-) Just jumper for normal ATA/100 mode.
The MSI 6321 motherboard *doesn't* *have* an option to run the chipset in "normal" ATA/100 mode, that's the problem.
Andre didn't really answer my question so, to re-phrase - can the 20265 on these boards be set up as a "normal" 2-port ATA/100 controller in software. The BIOS only enables one port - the second port's "enable bit" is showing that it is disabled. There is _no_ BIOS option to run it in non-RAID mode and no jumpers on the board to do so either.
If it can, then I'll happily write the code myself and maintain a local patch if needs be but I need to know what bits to poke out of what port and in what order. If it can't be done at least I'll _know_ that it can't be done.
I've already tried the MSI support mail address and been met with stunning silence.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 11 lines · Matthias Andree
Quoted 6 lines · Andre Hedrick
Quoted 2 lines · Paul Flinders
Talking of the Promise are there any plans to support re-enabling of the 2nd channel for boards which have an on-board FastTrak?
FastTrak == Ultra - Fake-RAID
But Fake-RAID is CHEAP to get two additional UDMA-5 capable channels :-) Just jumper for normal ATA/100 mode.
Please create a documnet not and send it to me ;-)
Andre Hedrick
Linux ATA Development
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/