Skip to contentSkip to conversation

A question about initialization of SDRAM

U-Boot-Users 蔡潋滟 2 participants 2 messages Nov 25, 2005

lore
Share & tools
lore

蔡潋滟

author
#0 lore raw

Thanks for your reply!

I had tried several different version of ppc_8xx-gcc to build the same u-boot.Only version 3.2.1 works ok.
All the others(3.2.2, 3.3.1 and 3.3.3) have the problem that I have said before. So I think that maybe there is something different between these versions of gcc. Would you please explain it to me? Thanks a lot.

Quoted 42 lines
Quoted 21 lines
Quoted 2 lines · In message <[email protected]> you wrote:

I am trying to use ELDK to make a u-boot on the board with MPC852T.

"the board with MPC852T"? There is many such boards, most of them differnt.

Quoted 1 line

There is declaration of rtx in cpu/mpc8xx/fec.c:

...

Quoted 1 line
		static RTXBD *rtx = NULL;

...

Quoted 2 lines
		I think that "rtx" should be NULL at the first time fec_init() is entered,so the rtx will be given the value.
		but after the ELDK make the u-boot, "rtx" isn't NULL at the first time fec_init() is entered, it is 0xffffffff.

What makes you think so? The code is running perfectly fine on many boards. Which specific problem do you see?

Quoted 2 lines
		Before the word "memctl->memc_mbmr  = 0xD0924114" in the function initdram, rtx is NULL(0x0),but after that it
		is 0xffffffff. Part of the fuction initdram is below:

Looks as if there was a bug in the SDRAM init sequence for your board.

Quoted 17 lines
Quoted 1 line

I wonder what happens in "memctl->memc_mbmr = 0xD0924114;",would you please explain it to me ? Thanks!

Please see the processor's User's Manual; read the memory controller section.

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
WARNING:  This Product Attracts Every Other Piece  of  Matter in  the
Universe, Including the Products of Other Manufacturers, with a Force
Proportional  to the Product of the Masses and Inversely Proportional
to the Distance Between Them.

= = = = = = = = = = = = = = = = = = = =

#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

I had tried several different version of ppc_8xx-gcc to build the same u-boot.Only version 3.2.1 works ok.
All the others(3.2.2, 3.3.1 and 3.3.3) have the problem that I have said before. So I think that maybe there is something different between these versions of gcc. Would you please explain it to me? Thanks a lot.

I cannot confirm your observation. For example, ELDK release 3.1.1 uses GCC 3.3.3, and this works perfectly fine.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Parkinson's Law:  Work expands to fill the time alloted it.