hw/display/vga: fix text-mode OOB write after a graphics surface switch
PATCH v2 1/1 hw/display/vga: fix text-mode OOB write after a graphics surface switch
vga_draw_text() decides whether the console surface needs a resize from its geometry cache, but none of the cache terms observe the graphics renderer having replaced the console surface in between:
- last_width/last_height are shared with vga_draw_graphic(), which stores them in pixels while the text path stores characters;
- last_depth stays 0 for legacy (non-VBE) graphics modes, because vga_get_bpp() only reports a depth when VBE is enabled, so the "s->last_depth" term that normally forces a resize after a graphics frame does not fire.
So a graphics frame that shrinks the console surface (e.g. 80x25 pixels) followed by a text frame with matching character geometry (80x25 chars) skips the resize, and the glyph loop then paints width*cw x height*cheight pixels into the smaller surface, out of bounds, with guest-controlled (DAC palette) values, on every display refresh.
Split the geometry cache per renderer so the units are unambiguous, and additionally make the text path compare the pixel size it is about to paint against the console surface's actual dimensions. The surface check is the load-bearing term: caches in either unit cannot see the other renderer swapping the surface, the surface can.
Fixes: CVE-2026-77913
Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/4215
---
Changes v1 -> v2:
- v1 (split caches only) did not fix the reported reproducer: after a legacy graphics frame (depth 0) the text predicate still compared equal, because nothing in it noticed the console surface had been replaced. Keep the split for clarity, and add the surface-size check which actually catches it (verified with the qtest PoC and an ASAN build; without this patch ASAN reports a heap-buffer-overflow in vga_draw_glyph9(), with it the run is clean).
--- hw/display/vga.c | 13 ++++++++++--- hw/display/vga_int.h | 3 ++- 2 files changed, 12 insertions(+), 4 deletions(-)
hw/display/vga.c +10 -3
@@ -1241,7 +1241,10 @@ static void vga_draw_text(VGACommonState *s, int full_update)return ; } -if (width != s->last_width || height != s->last_height || +if (surface ==NULL || +surface_width (surface) != width * cw || +surface_height (surface) != height * cheight || + width != s->last_text_width || height != s->last_text_height || cw != s->last_cw || cheight != s->last_ch || s->last_depth) { s->last_scr_width = width * cw; s->last_scr_height = height * cheight;
@@ -1249,8 +1252,8 @@ static void vga_draw_text(VGACommonState *s, int full_update) surface =qemu_console_surface (s->con);qemu_console_text_resize (s->con, width, height); s->last_depth =0 ; - s->last_width = width; - s->last_height = height; + s->last_text_width = width; + s->last_text_height = height; s->last_ch = cheight; s->last_cw = cw; full_update =1 ;
@@ -1845,6 +1848,8 @@ static void vga_invalidate_display(void *opaque) s->last_width =-1 ; s->last_height =-1 ; + s->last_text_width =-1 ; + s->last_text_height =-1 ; }void vga_common_reset (VGACommonState *s)
@@ -1887,6 +1892,8 @@ void vga_common_reset(VGACommonState *s) s->last_ch =0 ; s->last_width =0 ; s->last_height =0 ; + s->last_text_width =0 ; + s->last_text_height =0 ; s->last_scr_width =0 ; s->last_scr_height =0 ; s->cursor_start =0 ;
hw/display/vga_int.h +2 -1
@@ -122,7 +122,8 @@ typedef struct VGACommonState {uint32_t plane_updated;uint32_t last_line_offset;uint8_t last_cw, last_ch; -uint32_t last_width, last_height;/* in chars or pixels */ +uint32_t last_width, last_height;/* in pixels (graphics renderer) */ +uint32_t last_text_width, last_text_height;/* in chars (text renderer) */ uint32_t last_scr_width, last_scr_height;/* in pixels */ uint32_t last_depth;/* in bits */ bool last_byteswap;
Signature · 1 line
2.47.3
Hi
Quoted 93 lines · Warisjeet Singh
vga_draw_text()decides whether the console surface needs a resize from its geometry cache, but none of the cache terms observe the graphics renderer having replaced the console surface in between:- last_width/last_height are shared with
vga_draw_graphic(), which stores them in pixels while the text path stores characters;
-last_depthstays 0 for legacy (non-VBE) graphics modes, becausevga_get_bpp()only reports a depth when VBE is enabled, so the "s->last_depth" term that normally forces a resize after a graphics frame does not fire.So a graphics frame that shrinks the console surface (e.g. 80x25 pixels) followed by a text frame with matching character geometry (80x25 chars) skips the resize, and the glyph loop then paints width*cw x height*cheight pixels into the smaller surface, out of bounds, with guest-controlled (DAC palette) values, on every display refresh.
Split the geometry cache per renderer so the units are unambiguous, and additionally make the text path compare the pixel size it is about to paint against the console surface's actual dimensions. The surface check is the load-bearing term: caches in either unit cannot see the other renderer swapping the surface, the surface can.
Fixes: CVE-2026-77913
Resolves: https://gitlab.com/qemu-project/qemu/-/work_items/4215Signed-off-by Warisjeet Singh (sin99xx) <[email protected]>---
Changes v1 -> v2:
- v1 (split caches only) did not fix the reported reproducer: after a legacy graphics frame (depth 0) the text predicate still compared equal, because nothing in it noticed the console surface had been replaced. Keep the split for clarity, and add the surface-size check which actually catches it (verified with the qtest PoC and an ASAN build; without this patch ASAN reports a heap-buffer-overflow invga_draw_glyph9(), with it the run is clean).--- hw/display/vga.c | 13 ++++++++++--- hw/display/vga_int.h | 3 ++- 2 files changed, 12 insertions(+), 4 deletions(-)hw/display/vga.c +10
-3@@ -1241,7 +1241,10 @@ static void vga_draw_text(VGACommonState *s, int full_update)return ; } -if (width != s->last_width || height != s->last_height || +if (surface ==NULL || +surface_width (surface) != width * cw || +surface_height (surface) != height * cheight || + width != s->last_text_width || height != s->last_text_height || cw != s->last_cw || cheight != s->last_ch || s->last_depth) { s->last_scr_width = width * cw; s->last_scr_height = height * cheight;@@ -1249,8 +1252,8 @@ static void vga_draw_text(VGACommonState *s, int full_update) surface =qemu_console_surface (s->con);qemu_console_text_resize (s->con, width, height); s->last_depth =0 ; - s->last_width = width; - s->last_height = height; + s->last_text_width = width; + s->last_text_height = height; s->last_ch = cheight; s->last_cw = cw; full_update =1 ;@@ -1845,6 +1848,8 @@ static void vga_invalidate_display(void *opaque) s->last_width =-1 ; s->last_height =-1 ; + s->last_text_width =-1 ; + s->last_text_height =-1 ; }void vga_common_reset (VGACommonState *s)@@ -1887,6 +1892,8 @@ void vga_common_reset(VGACommonState *s) s->last_ch =0 ; s->last_width =0 ; s->last_height =0 ; + s->last_text_width =0 ; + s->last_text_height =0 ; s->last_scr_width =0 ; s->last_scr_height =0 ; s->cursor_start =0 ;hw/display/vga_int.h +0
-0
hw/display/vga_int.h typedef struct VGACommonState { · line 126
Quoted 6 lines
hw/display/vga_int.h +2
-1@@ -122,7 +122,8 @@ typedef struct VGACommonState {uint32_t plane_updated;uint32_t last_line_offset;uint8_t last_cw, last_ch; -uint32_t last_width, last_height;/* in chars or pixels */ +uint32_t last_width, last_height;/* in pixels (graphics renderer) */ +uint32_t last_text_width, last_text_height;/* in chars (text renderer) */
We should finish separating gfx and text state.
The text functions and paths should only manipulate last_text_{width,height} (in vga_draw_text/update_text, and text path in invalidate_display/common_reset)
Quoted 6 lines
hw/display/vga_int.h +0
-1uint32_t last_scr_width, last_scr_height;/* in pixels */ uint32_t last_depth;/* in bits */ bool last_byteswap; --2.47.3
Hi Marc-André,
Quoted 4 lines · Marc-André Lureau
We should finish separating gfx and text state.
The text functions and paths should only manipulate last_text_{width,height} (in vga_draw_text/update_text, and text path in invalidate_display/common_reset)
Done in v3: vga_update_text() (predicate, cache stores, the -1 invalidate handshake, and the mode-message box) now uses last_text_{width,height} too, so the text paths never touch the graphics cache fields. last_{width,height} are written by vga_draw_graphic() and the shared reset/invalidate points only.
Re-verified on master @ eea8fe61b8: the qtest PoC (graphics 80x25 px -> text 80x25 chars) is caught by the surface check, QEMU survives; SeaBIOS text boot screendump still gives a clean 720x400 frame.
v3 sent as a new thread: [PATCH v3] hw/display/vga: fix text-mode OOB write after a graphics surface switch.
Regards,
Warisjeet