problem with suspension
Hi,
I have a problem with suspension.
When I do
echo disk > /sys/power/state
I have a problem with modules of SCSI controller, aic7xxx. I've tryed to remove the modules with
modprobe -r aic7xxx
but the kernel was in panic. The message is
Kernel Panic - Not syncing: Loop 1
If I don't load the module aic7xxx and I try to do the suspension, all is ok.
What I do?
Sorry for my english.
Tnk
Luca
_______________________________________
Connessione ed e-mail gratuita da 10 mb consultabile tramite web e tramite pop. www.infinito.it vieni a scoprire tutti i nostri servizi!
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
Hi!
Quoted 10 lines
I have a problem with suspension.
When I doecho disk >
/sys/power/stateI have a problem with modules of SCSI controller, aic7xxx. I've tryed to remove the modules with
modprobe -r aic7xxx
Quoted 8 lines
but the kernel was in panic. The message is
Kernel Panic - Not syncing: Loop 1
If I don't load the module aic7xxx and I try to do the suspension, all is ok.
What I do?
Fix aic7xxx so that it rmmods cleanly as a first step?
Pavel
Signature · 9 lines
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl! ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
Hi Pavel!
Quoted 1 line · Pavel Machek
Quoted 1 line
I have a problem with suspension.
<cut>
Quoted 1 line
Quoted 1 line
I have a problem with modules of SCSI controller, aic7xxx.
<cut>
Quoted 1 line
Fix aic7xxx so that it rmmods cleanly as a first step?
It's clear that this is something which should be done, but...
I discussed with Luca about his problem on an Italian LUG mailing-list and we found out that there's a preliminary suspend/resume support for the aic7xxx [1] [2], the patch for which actually doesn't apply to the latest stable 2.6.10. So I suggested him to post on this mailing-list hoping that someone could point to a more recent patch (or provide any solution other than not loading the module).
But, indeed, there're two problems:
1) removing the aic7xxx is not a clean process
2) the aic7xxx supsend/resume support is in progress
Just my 0.02c.
Thx, bye,
Gismo / Luca
[1] http://lkml.org/lkml/2004/07/22/210
[2] http://lkml.org/lkml/2004/12/17/187