Skip to contentSkip to conversation

Who is connected to network

DISCUSSION it clown 4 participants 4 messages Jan 5, 2005 – Nov 29, 2005

lore
Share & tools
lore

it clown

author
#0 lore raw

Is there a way to see who is connected to your network.

Say if you have a wireless network and you need to know if someone got it right to get onto your network.

How do you monitor that and how do you prevent it?

Even on a normal network how could you monitor who is connected to your network?

Regards
_____________________________________________________________________
For super low premiums, click here http://www.dialdirect.co.za/quote

#1 lore raw

Currently we have coded something in house that scrubs all the connectivity devices for the mac addresses and will email us when an unauthorized device shows up on the network (All Cisco gear). There is work in progress to expand this to automatically clip the port and fire off a series of emails and other actions. Additionally, all of the ports on the switches are configured to allow only one device into a port, so it would be very difficult to drop a hub in place and start sniffing. There are also a few other tricks in place to prevent man in the middle attacks and a few other exploits.

As far as the wireless stuff goes, it would be amazingly difficult but not impossible to get it right. Our AP's will not allow authentication without the client mac being pounded into our ACS servers.(MAC spoofing isn't all that hard, but) Also the AP's don't broadcast the SSID's(fairly easy to get around). In the case that someone gets the first two right, they need to then figure out the name of the VPN servers. We do not allow any type of access from the AP's without a VPN session established. Then they need to get the VPN settings right and also need to have a user account comprised that had VPN access. Not impossible, but quite difficult for someone to do without making any "noise" that we would be alerted on. At that point the access lists on the AP's keep you from really touching any of the gear that would hurt us.

All that being said there are million of exploits out there and lots of tools, but we feel that we have a fairly good system in place to deter all but the very skilled and very determined person out there.

Hope that provides a bit of info you were looking for. Feel free to ask any ?'s if you have any.

Mike Balasko
Network Specialist II
City of Henderson

Quoted 16 lines · it clown

Is there a way to see who is connected to your network.

Say if you have a wireless network and you need to know if someone got it right to get onto your network.

How do you monitor that and how do you prevent it?

Even on a normal network how could you monitor who is connected to your network?

Regards
_____________________________________________________________________
For super low premiums, click here http://www.dialdirect.co.za/quote

#3 lore raw
In reply to it clown
Quoted 9 lines · it clown

Is there a way to see who is connected to your network.

Say if you have a wireless network and you need to know if someone got it right to get onto your network.

How do you monitor that and how do you prevent it?

Even on a normal network how could you monitor who is connected to your network?

You can always use a radius server to authentificate the users and it will give you who is connected to the network. The most obvious option for this is Freeradius, it's a little complicate to make it run but it's very useful further.

Another option is using ntop, that can show you the machines connected to the network.

Signature · 12 lines
Jose Maria Lopez Hernandez
Director Tecnico de bgSEC
[email protected]
bgSEC Seguridad y Consultoria de Sistemas Informaticos
http://www.bgsec.com
ESPAÑA

The only people for me are the mad ones -- the ones who are mad to live,
mad to talk, mad to be saved, desirous of everything at the same time,
the ones who never yawn or say a commonplace thing, but burn, burn, burn
like fabulous yellow Roman candles.
                -- Jack Kerouac, "On the Road"
#2 lore raw
In reply to Michael Balasko

Can you give some more tips how you setup the VPN ?
What kind of VPN you use. Do you have a IPsec server our PPTP ? Who establish the VPN at the client side, is it the wireless client or a host/router behind it ?

Thanks,

Alex

Em Qua 05 Jan 2005 14:38, Michael Balasko escreveu:

Quoted 48 lines

Currently we have coded something in house that scrubs all the connectivity devices for the mac addresses and will email us when an unauthorized device shows up on the network (All Cisco gear). There is work in progress to expand this to automatically clip the port and fire off a series of emails and other actions. Additionally, all of the ports on the switches are configured to allow only one device into a port, so it would be very difficult to drop a hub in place and start sniffing. There are also a few other tricks in place to prevent man in the middle attacks and a few other exploits.

As far as the wireless stuff goes, it would be amazingly difficult but not impossible to get it right. Our AP's will not allow authentication without the client mac being pounded into our ACS servers.(MAC spoofing isn't all that hard, but) Also the AP's don't broadcast the SSID's(fairly easy to get around). In the case that someone gets the first two right, they need to then figure out the name of the VPN servers. We do not allow any type of access from the AP's without a VPN session established. Then they need to get the VPN settings right and also need to have a user account comprised that had VPN access. Not impossible, but quite difficult for someone to do without making any "noise" that we would be alerted on. At that point the access lists on the AP's keep you from really touching any of the gear that would hurt us.

All that being said there are million of exploits out there and lots of tools, but we feel that we have a fairly good system in place to deter all but the very skilled and very determined person out there.

Hope that provides a bit of info you were looking for. Feel free to ask any ?'s if you have any.

Mike Balasko
Network Specialist II
City of Henderson

Quoted 13 lines · it clown

Is there a way to see who is connected to your network.

Say if you have a wireless network and you need to know if someone got it right to get onto your network.

How do you monitor that and how do you prevent it?

Even on a normal network how could you monitor who is connected to your network?

Regards
_____________________________________________________________________
For super low premiums, click here http://www.dialdirect.co.za/quote