2.4.30: pwc pwc_isoc_handler() called with status -84
I have a Philips 750 webcam camera, equipped with a Sony CCD sensor + TDA878.
It was working fine with 2.4.29 and earlier kernels, often with 100-150 days uptime.
As I upgraded to 2.4.30-rc kernels, started getting such error in my kernel log:
pwc Too many ISOC errors, bailing out.
pwc pwc_isoc_handler() called with status -84 [CRC/Timeout (could be anything)].
[khubd] got 100% cputime, and kernel just printed and printed this message to the log, generating huge files. :-)
rc4 is still doing this. 1-2 hour online, the something get mad and the pwc driver eat the cputime. 2.4.28 was 100% okay from this point of view.
Hi Gabor,
This seems to be a USB specific problem and my USB knowledge is null.
CCing Pete.
Quoted 20 lines · Gabor Z. Papp
I have a Philips 750 webcam camera, equipped with a Sony CCD sensor + TDA878.
It was working fine with 2.4.29 and earlier kernels, often with 100-150 days uptime.
As I upgraded to 2.4.30-rc kernels, started getting such error in my kernel log:
pwc Too many ISOC errors, bailing out.
pwcpwc_isoc_handler()called with status -84 [CRC/Timeout (could be anything)].[khubd] got 100% cputime, and kernel just printed and printed this message to the log, generating huge files. :-)
rc4 is still doing this. 1-2 hour online, the something get mad and the pwc driver eat the cputime. 2.4.28 was 100% okay from this point of view.
Quoted 12 lines · On Tue, 5 Apr 2005 10:55:52 -0300 Marcelo Tosatti…
CCing Pete.
Quoted 8 lines · Gabor Z. Papp
It was working fine with 2.4.29 and earlier kernels, often with 100-150 days uptime.
As I upgraded to 2.4.30-rc kernels, started getting such error in my kernel log:
pwc Too many ISOC errors, bailing out.
pwcpwc_isoc_handler()called with status -84 [CRC/Timeout (could be anything)].
There is no other way but to start splitting patches and diff-ing. We can narrow this down a little by looking at what _might_ be involved. Is this device driven by EHCI? A snapshot of /proc/bus/usb/devices would be useful (BTW, Gabor, please do it on both 2.4.28 and 2.4.30-rc).
Thanks,
-- Pete
* Pete Zaitcev <[email protected]>:
| > > pwc Too many ISOC errors, bailing out. | > > pwc pwc_isoc_handler() called with status -84 [CRC/Timeout (could be anything)]. | | There is no other way but to start splitting patches and diff-ing. | We can narrow this down a little by looking at what _might_ be involved. | Is this device driven by EHCI?
yes, i think so. Asus P4C800-E mobo. Details in the tarball.
| A snapshot of /proc/bus/usb/devices would be useful (BTW, Gabor, | please do it on both 2.4.28 and 2.4.30-rc).
Right now I have .30-rc only: http://gzp.odpn.net/tmp/pwc/pwc.tgz
I should compile a new 2.4.28, because I deleted...