2.4.0 statd trouble

DISCUSSION [email protected] 4 participants 6 messages Jan 23, 2001 – Jan 25, 2001

lore

Share & tools

lore

[email protected]

author

2001-01-23 19:03 UTC #0 lore raw

linux-2.4.0

I have quite a lot of these log messages:

Jan 23 18:28:52 adglinux1 rpc.statd[1532]: gethostbyname error for adglinux1.hns.com
Jan 23 18:28:52 adglinux1 rpc.statd[1532]: STAT_FAIL to adglinux1.hns.com for SM_MON of 139.85.108.141
Jan 23 13:28:52 adglinux1 kernel: lockd: cannot monitor 139.85.108.141

I am running a local named, and resolv.conf has:

search md.hns.com hns.com
nameserver 127.0.0.1
nameserver 139.85.92.109
nameserver 139.85.52.100

So I can't imagine why gethostbyname have any problem either for adglinux1.hns.com or for 139.85.108.141.

Here's what nslookup says on the same machine:

nslookup 139.85.108.141

Server:  localhost.0.0.127.in-addr.arpa
Address:  127.0.0.1

Name:    rpppc2.hns.com
Address:  139.85.108.141

Any ideas?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

List User

2001-01-23 22:20 UTC #1 lore raw

Kernel panic v2.4.0 (P3CPU/Tyan S2505MB)

Sorry to bug this list but I hope that someone here can help me pin-point a problem with a kernel panic. I am currently running v2.4.0 on several tyan S1668 MB's. I went to migrate to the new Tyan S2505 MB. I run the kernel monolithic, and have the built-in video (ATI Rage) enabled, built-in Promise FastTrak raid disabled. Everything else standard.

Any help would be appreciated. If more information is needed please let me know.

This is what I got and the ksymoops output:

----------------------<panic text copied from screen>------ /dev/scsi/host0/bus0/target3/lun0: p1
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed

   8regs     :  1541.526 MB/sec
   32regs    :  1171.194 MB/sec
invalid operand: 0000
CPU:    0
EIP:    0010:[<c01d3b95>]
EFLAGS: 00010206
eax: dffedf5c   ebx: c190ef40   ecx: 0000000f   edx: 8005003b
esi: c190c000   edi: 00000001   ebp: 00000000   esp: dffedf54
ds: 0018        es: 0018        ss: 0018
Process swapper ( pid:1, stackpage=dffed000)
Stack:  00000000 000004a3 00000001 c027b244 c02cd383 c0116fe7 00000493
000004a2
        00000005 00000c42 00000282 00000001 c02cd383 00000020 c01d4d82
c0266ece
        c0266ec7 00000493 c01d4d12 00000f40 c190e000 c190ef40 c190c000
c190ef40
Call Trace: [<c0116fe7>] [<c01d4d82>] [<c01d4d12>] [<c01d4e0b7>]
[<c01070e9>] [<c01074bc>]
Code:   0f 11 00 0f 11 48 10 0f 11 50 20 0f 11 58 30 0f 18 4e 00 0f

Kernel Panic: Attempted to kill init!
---------> Ksymooops output <------
ksymoops 2.3.7 on i686 2.4.0. Options used
-v /usr/src/linux/vmlinux (specified)
-K (specified)
-L (specified)
-O (specified)
-m /usr/src/linux/System.map (specified)

invalid operand: 0000
CPU:    0
EIP:    0010:[<c01d3b95>]

Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010206
eax: dffedf5c ebx: c190ef40 ecx: 0000000f edx: 8005003b
esi: c190c000 edi: 00000001 ebp: 00000000 esp: dffedf54
ds: 0018 es: 0018 ss: 0018
Process swapper ( pid:1, stackpage=dffed000)

Stack:  00000000 000004a3 00000001 c027b244 c02cd383 c0116fe7 00000493
000004a2
        00000005 00000c42 00000282 00000001 c02cd383 00000020 c01d4d82
c0266ece
        c0266ec7 00000493 c01d4d12 00000f40 c190e000 c190ef40 c190c000
c190ef40
Call Trace: [<c0116fe7>] [<c01d4d82>] [<c01d4d12>] [<c01d4e0b7>]
[<c01070e9>] [<c01074bc>]
Code:   0f 11 00 0f 11 48 10 0f 11 50 20 0f 11 58 30 0f 18 4e 00 0f

Quoted 1 line

Quoted 1 line
EIP; c01d3b95 <xor_sse_2+1d/1dc> <=====

Trace; c0116fe7 <printk+167/174>
Trace; c01d4d82 <do_xor_speed+c2/cc>
Trace; c01d4d12 <do_xor_speed+52/cc>
Trace; c01d4e0b7 <END_OF_CODE+b41a44ca3/????>
Trace; c01070e9 <init+e9/160>
Trace; c01074bc <kernel_thread+28/38>
Code; c01d3b95 <xor_sse_2+1d/1dc>
00000000 <_EIP>:
Code; c01d3b95 <xor_sse_2+1d/1dc> <=====
0: 0f 11 00 movups %xmm0,(%eax) <=====
Code; c01d3b98 <xor_sse_2+20/1dc>
3: 0f 11 48 10 movups %xmm1,0x10(%eax)
Code; c01d3b9c <xor_sse_2+24/1dc>
7: 0f 11 50 20 movups %xmm2,0x20(%eax)
Code; c01d3ba0 <xor_sse_2+28/1dc>
b: 0f 11 58 30 movups %xmm3,0x30(%eax)
Code; c01d3ba4 <xor_sse_2+2c/1dc>
f: 0f 18 4e 00 prefetcht0 0x0(%esi)
Code; c01d3ba8 <xor_sse_2+30/1dc>
13: 0f 00 00 sldt (%eax)

Kernel Panic: Attempted to kill init!
---------------> .config options that are enabled for kernel <-----

CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_M586=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_PNP=y
CONFIG_ISAPNP=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_DAC960=y
CONFIG_LOOP_DEP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_MD_BOOT=y
CONFIG_AUTODETECT_RAID=y
CONFIG_BLK_DEV_LVM=y
CONFIG_LVM_PROC_FS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_SYN_COOKIES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=40
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_BUSLOGIC=y
CONFIG_SCSI_OMIT_FLASHPOINT=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_DE4X5=y
CONFIG_EEPRO100=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_QUOTA=y
CONFIG_ISO9660_FS=y
CONFIG_MINIX_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_MSDOS_PARTITION=y
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y

---------------------------------

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

Juri Haberland

2001-01-24 10:01 UTC #2 lore raw

In reply to [email protected]

Quoted 8 lines · [email protected] wrote:

linux-2.4.0

I have quite a lot of these log messages:

Jan 23 18:28:52 adglinux1 rpc.statd[1532]: gethostbyname error for adglinux1.hns.com
Jan 23 18:28:52 adglinux1 rpc.statd[1532]: STAT_FAIL to adglinux1.hns.com for SM_MON of 139.85.108.141
Jan 23 13:28:52 adglinux1 kernel: lockd: cannot monitor 139.85.108.141

Upgrade your nfs-utils to version 0.2.1

Greetings,
Juri

Signature · 8 lines

[email protected]
system engineer                                         innominate AG
clustering & security                            the linux architects
tel: +49-30-308806-45   fax: -77            http://www.innominate.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

Luc de Louw

2001-01-24 19:55 UTC #3 lore raw

Hi!

Quoted 5 lines · Juri Haberland

Quoted 4 lines · [email protected] wrote:
linux-2.4.0
I have quite a lot of these log messages:

<snip>

Quoted 16 lines

Upgrade your nfs-utils to version 0.2.1

Greetings,
Juri

Signature · 8 lines

[email protected]
system engineer                                         innominate AG
clustering & security                            the linux architects
tel: +49-30-308806-45   fax: -77            http://www.innominate.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

Maybee a dumb question: how to find out the version already installed? And I think, its maybee useful to write this as a pre-req in Documentation/Changes ?

TIA

rgds

Luc de Louw

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

[email protected]

author

2001-01-24 20:10 UTC #4 lore raw

OK, you can find nfs-utils at http://sourceforge.net/projects/nfs

You can build on RH7 using rpm -ta /tmp/nfs-utils-0.2.1.tar.gz.

These are worth mentioning in "Changes".
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

Juri Haberland

2001-01-25 08:11 UTC #5 lore raw

In reply to Juri Haberland

Quoted 10 lines · Luc de Louw

Hi!
Quoted 5 lines · Juri Haberland
Quoted 4 lines · [email protected] wrote:
linux-2.4.0
I have quite a lot of these log messages:

Quoted 8 lines

<snip>
Quoted 2 lines
Upgrade your nfs-utils to version 0.2.1
Maybee a dumb question: how to find out the version already installed? And I think, its maybee useful to write this as a pre-req in Documentation/Changes ?

Just type 'showmount -v'.

Juri

Signature · 8 lines

[email protected]
system engineer                                         innominate AG
clustering & security                            the linux architects
tel: +49-30-308806-45   fax: -77            http://www.innominate.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/