Skip to contentSkip to conversation

sparc32 2.4.19: cpu race with modprobe qlogicpti.o

DISCUSSION Andreas Loong 1 participant 1 message Sep 29, 2002

lore
Share & tools
lore
#0 lore raw

[1.] brief statement
SPARC hangs when doing modprobe

[2.] full description.
when doing modprobe -a qlogicpti a cpu race condition occurs and the machine goes down to prom-level. unfortunately, none of the messages made it into any logfiles.
this message is printed to the console:
Warning: loading /lib/modules/2.4.19/kernel/drivers/scsi/qlogicpti.o will taint the kernel: no license

[3.] keywords.
qlogic cpu race modprobe

[4.] full kernel version.
Linux version 2.4.19 (root@calamari) (gcc version 2.95.4 20011002 (Debian prerelease)) #5 SMP Wed Sep 25 14:16:58 CEST 2002

[7.1.] Gnu C 2.95.4

Gnu make               3.79.1
util-linux             2.11n
mount                  2.11n
modutils               2.4.15
e2fsprogs              1.27
Linux C Library        2.2.5
Dynamic linker (ldd)   2.2.5
Procps                 2.0.7
Net-tools              1.60
Console-tools          0.2.3
Sh-utils               2.0.11
Modules Loaded         openprom slip slhc sg autofs

[7.2.]
cpu : ROSS HyperSparc RT625 or RT626
fpu : ROSS HyperSparc combined IU/FPU
promlib : Version 3 Revision 2
prom : 2.25
type : sun4m
ncpus probed : 4
ncpus active : 4
Cpu0Bogo : 99.73
Cpu1Bogo : 99.94
Cpu2Bogo : 99.94
Cpu3Bogo : 99.94
MMU type : ROSS HyperSparc
contexts : 4096
nocache total : 1048576
nocache used : 398336
CPU0 : online
CPU1 : online
CPU2 : online
CPU3 : online

[7.3.] Module information (from /proc/modules):

slip                   11764   0 (unused)
slhc                    4752   0 [slip]
sg                     30780   0
autofs                 10772   0 (unused)

[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) nothing at all

[7.5.] PCI information ('lspci -vvv' as root)
is there an equivalent command for sparc/sbus?

[7.6.] SCSI information (from /proc/scsi/scsi) Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST34371W SUN4.2G Rev: 7462
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: SEAGATE Model: ST39173W SUN9.0G Rev: 2815
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: TOSHIBA Model: XM-4101TASUNSLCD Rev: 1084
Type: CD-ROM ANSI SCSI revision: 02

[X.] Other notes, patches, fixes, workarounds:
I've been trying to reproduce the problem, but I can't do it in the exact same way as the first time. However, if it does not go down while loading, a simple matter of unloading the module brings the machine down hard. I'm fairly new to linux, but if there's anything I can do to get you the info needed to fix the problem, I'll do it. All I need is a bit of guidance.

Wbr
Andreas Loong