Skip to contentSkip to conversation

Location of git config on Windows

DISCUSSION Daniel Corbe 4 participants 11 messages Jun 15, 2016

lore
Share & tools
lore
#0 lore raw

I installed git on my Windows machine while it was connected to my corporate network. It picked up on that fact and used a mapped drive to store its configuration file.

As a result, I cannot currently use git when disconnected from my network. It throws the following error message: fatal: unable to access 'Z:\/.config/git/config': Invalid argument

Obviously this value is stored in the registry somewhere because I made an attempt to uninstall and reinstall git with the same results.

Can someone give me some guidance here?

Best,
Daniel

P.S. A screenshot for reference: http://i.imgur.com/i9lm0Da.png

#1 lore raw
Quoted 10 lines

-----Original Message-----
From: Daniel Corbe
Sent: Sunday, August 17, 2014 16:18

I installed git on my Windows machine while it was connected to my corporate network. It picked up on that fact and used a mapped drive to
store its configuration file.

Quoted 4 lines

As a result, I cannot currently use git when disconnected from my network. It throws the following error message: fatal:
unable to access
'Z:\/.config/git/config': Invalid argument

As a workaround, use subst command to map the Z: to another path on your system.

Depending on your OS and your git usage patterns you may have to perform the operation twice at both non-privilged and priviliged prompts.

Ex:

subst z: c:\Users\corbed\cached-z-drive

Quoted 7 lines

Obviously this value is stored in the registry somewhere because I made
an attempt to uninstall and reinstall git with the same results.

Can someone give me some guidance here?

-Jason

--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
- -

- Jason Pyeron                      PD Inc. http://www.pdinc.us -
- Principal Consultant              10 West 24th Street #100    -
- +1 (443) 269-1555 x333            Baltimore, Maryland 21218   -

- -
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This message is copyright PD Inc, subject to license 20080407P00.

#2 lore raw
In reply to Daniel Corbe
Quoted 5 lines · Daniel Corbe

I installed git on my Windows machine while it was connected to my corporate network. It picked up on that fact and used a mapped drive to store its configuration file.

Quoted 8 lines

As a result, I cannot currently use git when disconnected from my network. It throws the following error message: fatal: unable to access 'Z:\/.config/git/config': Invalid argument

Obviously this value is stored in the registry somewhere because I made an attempt to uninstall and reinstall git with the same results.

Can someone give me some guidance here?

Git looks for the per-user configuration in $HOME/.gitconfig, and if $HOME is not set, it falls back to $HOMEDIR/$HOMEPATH/.gitconfig. My guess would be some of these environment variables are incorrectly set on your system.

#3 lore raw

Am 18.08.2014 00:01, schrieb Erik Faye-Lund:

Quoted 13 lines · Daniel Corbe
Quoted 12 lines

I installed git on my Windows machine while it was connected to my corporate network. It picked up on that fact and used a mapped drive to store its configuration file.

As a result, I cannot currently use git when disconnected from my network. It throws the following error message: fatal: unable to access 'Z:\/.config/git/config': Invalid argument

Obviously this value is stored in the registry somewhere because I made an attempt to uninstall and reinstall git with the same results.

Quoted 6 lines
Quoted 1 line

Can someone give me some guidance here?

Git looks for the per-user configuration in $HOME/.gitconfig, and if $HOME is not set, it falls back to $HOMEDIR/$HOMEPATH/.gitconfig. My guess would be some of these environment variables are incorrectly set on your system.

To be precise, git checks if %HOME% is set _and_ the directory exists before falling back to %HOMEDRIVE%%HOMEPATH%.

If %HOMEDRIVE%%HOMEPATH% isn't set or the directory doesn't exist either, it falls back to %USERPROFILE%, which is always local (C:/Users/<yourname>), even if disconnected from the network (at least that's how its supposed to be).

#4 lore raw
Quoted 21 lines · Karsten Blees

Am 18.08.2014 00:01, schrieb Erik Faye-Lund:

Quoted 13 lines · Daniel Corbe
Quoted 12 lines

I installed git on my Windows machine while it was connected to my corporate network. It picked up on that fact and used a mapped drive to store its configuration file.

As a result, I cannot currently use git when disconnected from my network. It throws the following error message: fatal: unable to access 'Z:\/.config/git/config': Invalid argument

Obviously this value is stored in the registry somewhere because I made an attempt to uninstall and reinstall git with the same results.

Quoted 6 lines
Quoted 1 line

Can someone give me some guidance here?

Git looks for the per-user configuration in $HOME/.gitconfig, and if $HOME is not set, it falls back to $HOMEDIR/$HOMEPATH/.gitconfig. My guess would be some of these environment variables are incorrectly set on your system.

Quoted 8 lines

To be precise, git checks if %HOME% is set _and_ the directory exists before falling back to %HOMEDRIVE%%HOMEPATH%.

If %HOMEDRIVE%%HOMEPATH% isn't set or the directory doesn't exist either, it falls back to %USERPROFILE%, which is always local (C:/Users/<yourname>), even if disconnected from the network (at least that's how its supposed to be).

Awesome! Thanks for the advice.

%HOMEDRIVE% and %HOMEPATH% are indeed set by my system and point to an
(often disconnected) network drive. I manually forced %HOME% to %USERPROFILE% and it works like a charm now.

I would argue that on Windows %USERPROFILE% should be checked first (or at least after %HOME%).

Best,
Daniel

#5 lore raw
Quoted 33 lines · Daniel Corbe
Quoted 21 lines · Karsten Blees

Am 18.08.2014 00:01, schrieb Erik Faye-Lund:

Quoted 13 lines · Daniel Corbe
Quoted 12 lines

I installed git on my Windows machine while it was connected to my corporate network. It picked up on that fact and used a mapped drive to store its configuration file.

As a result, I cannot currently use git when disconnected from my network. It throws the following error message: fatal: unable to access 'Z:\/.config/git/config': Invalid argument

Obviously this value is stored in the registry somewhere because I made an attempt to uninstall and reinstall git with the same results.

Quoted 6 lines
Quoted 1 line

Can someone give me some guidance here?

Git looks for the per-user configuration in $HOME/.gitconfig, and if $HOME is not set, it falls back to $HOMEDIR/$HOMEPATH/.gitconfig. My guess would be some of these environment variables are incorrectly set on your system.

Quoted 8 lines

To be precise, git checks if %HOME% is set _and_ the directory exists before falling back to %HOMEDRIVE%%HOMEPATH%.

If %HOMEDRIVE%%HOMEPATH% isn't set or the directory doesn't exist either, it falls back to %USERPROFILE%, which is always local (C:/Users/<yourname>), even if disconnected from the network (at least that's how its supposed to be).

Quoted 8 lines

Awesome! Thanks for the advice.

%HOMEDRIVE% and %HOMEPATH% are indeed set by my system and point to an
(often disconnected) network drive. I manually forced %HOME% to %USERPROFILE% and it works like a charm now.

I would argue that on Windows %USERPROFILE% should be checked first (or at least after %HOME%).

Why? Then people won't be able to have their config files on network-shares, no?

I think a somewhat better approach would be to resolve the home directory lazily, unless %HOME% is set. That way we can check that %HOMEDRIVE%%HOMEPATH% actually exists as it's being accessed. Or you could just restart your shell when you disconnect...

#6 lore raw
Quoted 1 line · Erik Faye-Lund

Or you could just restart your shell when you disconnect...

Well I'm not that daft. I tried that and if it had resolved my problem I wouldn't have posted.

#7 lore raw
Quoted 7 lines · Daniel Corbe
Quoted 1 line · Erik Faye-Lund

Or you could just restart your shell when you disconnect...

Well I'm not that daft. I tried that and if it had resolved my problem I wouldn't have posted.

Hm, but isn't that what Karsten explains in his last paragraph? What shell are you running msys or cmd?

#8 lore raw
Quoted 11 lines · Erik Faye-Lund
Quoted 7 lines · Daniel Corbe
Quoted 1 line · Erik Faye-Lund

Or you could just restart your shell when you disconnect...

Well I'm not that daft. I tried that and if it had resolved my problem I wouldn't have posted.

Hm, but isn't that what Karsten explains in his last paragraph? What shell are you running msys or cmd?

Our /etc/profile does this:

https://github.com/msysgit/msysgit/blob/master/etc/profile#L38

...however, our git-wrapper only does this:

https://github.com/msysgit/msysgit/blob/master/src/git-wrapper/git-wrapper.c#L71

So yeah, we don't seem to actually check if %HOMEDRIVE%%HOMEPATH% exists. Perhaps fixing this is the right thing to do then? Since the git-wrapper is run for *every* invokation of git, you wouldn't even have to restart the shell in this case.

#9 lore raw
Quoted 17 lines · Erik Faye-Lund
Quoted 11 lines · Erik Faye-Lund
Quoted 7 lines · Daniel Corbe
Quoted 1 line · Erik Faye-Lund

Or you could just restart your shell when you disconnect...

Well I'm not that daft. I tried that and if it had resolved my problem I wouldn't have posted.

Hm, but isn't that what Karsten explains in his last paragraph? What shell are you running msys or cmd?

Our /etc/profile does this:

https://github.com/msysgit/msysgit/blob/master/etc/profile#L38

Quoted 8 lines

...however, our git-wrapper only does this:

https://github.com/msysgit/msysgit/blob/master/src/git-wrapper/git-wrapper.c#L71

So yeah, we don't seem to actually check if %HOMEDRIVE%%HOMEPATH% exists. Perhaps fixing this is the right thing to do then? Since the git-wrapper is run for *every* invokation of git, you wouldn't even have to restart the shell in this case.

But again, restarting the shell doesn't fix the problem.

-Daniel

#10 lore raw
Quoted 21 lines · Daniel Corbe
Quoted 19 lines · Erik Faye-Lund
Quoted 11 lines · Erik Faye-Lund
Quoted 7 lines · Daniel Corbe
Quoted 1 line · Erik Faye-Lund

Or you could just restart your shell when you disconnect...

Well I'm not that daft. I tried that and if it had resolved my problem I wouldn't have posted.

Hm, but isn't that what Karsten explains in his last paragraph? What shell are you running msys or cmd?

Our /etc/profile does this:

https://github.com/msysgit/msysgit/blob/master/etc/profile#L38

...however, our git-wrapper only does this:

Quoted 9 lines
Quoted 6 lines

https://github.com/msysgit/msysgit/blob/master/src/git-wrapper/git-wrapper.c#L71

So yeah, we don't seem to actually check if %HOMEDRIVE%%HOMEPATH% exists. Perhaps fixing this is the right thing to do then? Since the git-wrapper is run for *every* invokation of git, you wouldn't even have to restart the shell in this case.

But again, restarting the shell doesn't fix the problem.

Not for cmd, no. But for Git Bash, it should.