Starting compressed win CE kernel
Hello,
I use U-Boot for starting Windows CE. At the moment I take the nk.bin File and start it with the U-Boot patch of Ryan Chen. Now I will compress the nk.bin file, because in addition to that it takes much less space in the Flash memory. I have tried it with the unzip command, but it takes too much time. Can I use another compression tool from u-boot. I think a compressed linux kernel can be started with bootm. So can I use maybe only the compression tool of the bootm command? If so, how can I do this?
Thanks,
Andreas
Dear "A. Geisreiter",
Quoted 1 line · In message <000e01ca2d48$728b0890$57a119b0$@de> you wrote:
Dies ist eine mehrteilige Nachricht im MIME-Format.
Please stop doing this. Please post plain text only. Do not post HTML.
Quoted 7 lines
I use U-Boot for starting Windows CE. At the moment I take the nk.bin File and start it with the U-Boot patch of Ryan Chen. Now I will compress the nk.bin file, because in addition to that it takes much less space in the Flash memory. I have tried it with the unzip command, but it takes too much time. Can I use another compression tool from u-boot. I think a compressed linux kernel can be started with bootm. So can I use maybe only the compression tool of the bootm command? If so, how can I do this?
What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de ATTENTION: Despite Any Other Listing of Product Contents Found Here- on, the Consumer is Advised That, in Actuality, This Product Consists Of 99.9999999999% Empty Space.
Hello Mr. Denk,
Quoted 1 line
Please stop doing this. Please post plain text only. Do not post HTML.
Sorry, I don't know it.
Quoted 3 lines
What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.
If bootm use the same code like the unzip command, then it couldn't be faster.
But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And this is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.
Thanks,
Andreas
Dear "A. Geisreiter",
Quoted 7 lines · In message <001701ca2d55$f30b6200$d9222600$@de> you wrote:
Quoted 4 lines
What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.
If bootm use the same code like the unzip command, then it couldn't be faster.
Indeed.
Quoted 4 lines
But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And this is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.
You probably want to enable caches on your system, to get faster performance. Jean-Christophe (on Cc:) claimed several times before that he was working on such patches. Maybe you ask him when he will post this stuff.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de On the subject of C program indentation: "In My Egotistical Opinion, most people's C programs should be indented six feet downward and covered with dirt." - Blair P. Houghton
Quoted 16 lines · Wolfgang Denk
Dear "A. Geisreiter",
Quoted 5 lines · In message <001701ca2d55$f30b6200$d9222600$@de> you wrote:
Quoted 3 lines
What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.
If bootm use the same code like the unzip command, then it couldn't be faster.
Indeed.
Quoted 4 lines
But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And this is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.
Quoted 4 lines
You probably want to enable caches on your system, to get faster performance. Jean-Christophe (on Cc:) claimed several times before that he was working on such patches. Maybe you ask him when he will post this stuff.
Unfortunately, there was no answer to
http://lists.denx.de/pipermail/u-boot/2009-August/058700.html
Dirk
Dear Jean-Christophe PLAGNIOL-VILLARD,
I tried to use the unzip command of U-Boot, to unzip a Win CE Kernel. If I have a file size of roughly 10MB it takes 1 minute to uncompress the kernel. This is too long for my application. I use an PXA270 CPU with 64MB SDRAM. How can I make the unzip command faster?
Description of my U-Boot application: At the moment I start Win CE from the flash memory in roughly 25 seconds. But the image takes much space on the flash, because I haven't compressed it at the moment. So I will use the zip functionality of U-boot to save space on flash memory. But this is only reasonable, if I can start the OS in roughly the same time as before.
Thanks and regards,
Andreas Geisreiter
-----Urspr?ngliche Nachricht-----
Von: Wolfgang Denk [mailto:wd at denx.de]
Gesendet: Freitag, 4. September 2009 14:17
An: A. Geisreiter
Cc: u-boot at lists.denx.de; Jean-Christophe Plagniol-Villard
Betreff: Re: [U-Boot] Starting compressed win CE kernel
Dear "A. Geisreiter",
Quoted 7 lines · In message <001701ca2d55$f30b6200$d9222600$@de> you wrote:
Quoted 4 lines
What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.
If bootm use the same code like the unzip command, then it couldn't be faster.
Indeed.
Quoted 2 lines
But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And
this
Quoted 2 lines
is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.
You probably want to enable caches on your system, to get faster performance. Jean-Christophe (on Cc:) claimed several times before that he was working on such patches. Maybe you ask him when he will post this stuff.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de On the subject of C program indentation: "In My Egotistical Opinion, most people's C programs should be indented six feet downward and covered with dirt." - Blair P. Houghton