Skip to contentSkip to conversation

Starting compressed win CE kernel

U-Boot A. Geisreiter 3 participants 6 messages Sep 4, 2009 – Oct 5, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

I use U-Boot for starting Windows CE. At the moment I take the nk.bin File and start it with the U-Boot patch of Ryan Chen. Now I will compress the nk.bin file, because in addition to that it takes much less space in the Flash memory. I have tried it with the unzip command, but it takes too much time. Can I use another compression tool from u-boot. I think a compressed linux kernel can be started with bootm. So can I use maybe only the compression tool of the bootm command? If so, how can I do this?

Thanks,

Andreas

#1 lore raw

Dear "A. Geisreiter",

Quoted 1 line · In message <000e01ca2d48$728b0890$57a119b0$@de> you wrote:

Dies ist eine mehrteilige Nachricht im MIME-Format.

Please stop doing this. Please post plain text only. Do not post HTML.

Quoted 7 lines

I use U-Boot for starting Windows CE. At the moment I take the nk.bin File and start it with the U-Boot patch of Ryan Chen. Now I will compress the nk.bin file, because in addition to that it takes much less space in the Flash memory. I have tried it with the unzip command, but it takes too much time. Can I use another compression tool from u-boot. I think a compressed linux kernel can be started with bootm. So can I use maybe only the compression tool of the bootm command? If so, how can I do this?

What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
ATTENTION: Despite Any Other Listing of Product Contents Found  Here-
on, the Consumer is Advised That, in Actuality, This Product Consists
Of 99.9999999999% Empty Space.
#2 lore raw

Hello Mr. Denk,

Quoted 1 line

Please stop doing this. Please post plain text only. Do not post HTML.

Sorry, I don't know it.

Quoted 3 lines

What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.

If bootm use the same code like the unzip command, then it couldn't be faster.
But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And this is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.

Thanks,
Andreas

#3 lore raw

Dear "A. Geisreiter",

Quoted 7 lines · In message <001701ca2d55$f30b6200$d9222600$@de> you wrote:
Quoted 4 lines

What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.

If bootm use the same code like the unzip command, then it couldn't be faster.

Indeed.

Quoted 4 lines

But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And this is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.

You probably want to enable caches on your system, to get faster performance. Jean-Christophe (on Cc:) claimed several times before that he was working on such patches. Maybe you ask him when he will post this stuff.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
On the subject of C program indentation: "In My Egotistical  Opinion,
most  people's  C  programs  should be indented six feet downward and
covered with dirt."                               - Blair P. Houghton
#4 lore raw
Quoted 16 lines · Wolfgang Denk

Dear "A. Geisreiter",

Quoted 5 lines · In message <001701ca2d55$f30b6200$d9222600$@de> you wrote:
Quoted 3 lines

What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.

If bootm use the same code like the unzip command, then it couldn't be faster.

Indeed.

Quoted 4 lines

But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And this is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.

Quoted 4 lines

You probably want to enable caches on your system, to get faster performance. Jean-Christophe (on Cc:) claimed several times before that he was working on such patches. Maybe you ask him when he will post this stuff.

Unfortunately, there was no answer to

http://lists.denx.de/pipermail/u-boot/2009-August/058700.html

Dirk

#5 lore raw
In reply to Wolfgang Denk

Dear Jean-Christophe PLAGNIOL-VILLARD,

I tried to use the unzip command of U-Boot, to unzip a Win CE Kernel. If I have a file size of roughly 10MB it takes 1 minute to uncompress the kernel. This is too long for my application. I use an PXA270 CPU with 64MB SDRAM. How can I make the unzip command faster?
Description of my U-Boot application: At the moment I start Win CE from the flash memory in roughly 25 seconds. But the image takes much space on the flash, because I haven't compressed it at the moment. So I will use the zip functionality of U-boot to save space on flash memory. But this is only reasonable, if I can start the OS in roughly the same time as before.

Thanks and regards,
Andreas Geisreiter

-----Urspr?ngliche Nachricht-----
Von: Wolfgang Denk [mailto:wd at denx.de]
Gesendet: Freitag, 4. September 2009 14:17
An: A. Geisreiter
Cc: u-boot at lists.denx.de; Jean-Christophe Plagniol-Villard
Betreff: Re: [U-Boot] Starting compressed win CE kernel

Dear "A. Geisreiter",

Quoted 7 lines · In message <001701ca2d55$f30b6200$d9222600$@de> you wrote:
Quoted 4 lines

What makes you think that the uncompression code used by bootm would be any faster than the one used by unzip? It ain't faster, as it is the very same code actually.

If bootm use the same code like the unzip command, then it couldn't be faster.

Indeed.

Quoted 2 lines

But I have compressed a nk.bin Windows Image file with GZIP. Then I uncompressed the 10MB File with U-Boot. It takes roughly 1 minute. And

this

Quoted 2 lines

is to much I think. What could I do to reduce the uncompression time? My hardware works with an PXA270 CPU.

You probably want to enable caches on your system, to get faster performance. Jean-Christophe (on Cc:) claimed several times before that he was working on such patches. Maybe you ask him when he will post this stuff.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
On the subject of C program indentation: "In My Egotistical  Opinion,
most  people's  C  programs  should be indented six feet downward and
covered with dirt."                               - Blair P. Houghton