Skip to contentSkip to conversation

ATI Radeon M6-C16h for PPC 440GX

U-Boot-Users Roberto Pavon Sierra 2 participants 2 messages Sep 19, 2005

lore
Share & tools
lore
#0 lore raw

Hello,

i?m using on my custom board with PPC 440GX a ATI M6 Mobility Radeon with kernel 2.6.12.
Now i have to initialize the ati and configure the kernel to support it. I don?t have the BIOS of ATI for PPC and i like to simulate this BIOS with U-boot. How can i configure the U-boot for ATI to initialize or how can i write the programm for ATI- EEPROM BIOS?
must i install a XF86-Simulator on my board?

Roberto Pavon

#1 lore raw
Quoted 7 lines · In message <000401c5bcfa$42609940$8700a8c0@SN7855> you wrote:

i?m using on my custom board with PPC 440GX a ATI M6 Mobility Radeon with kernel 2.6.12.
Now i have to initialize the ati and configure the kernel to support it. I don?t have the BIOS of ATI for PPC and i like to simulate this BIOS with U-boot. How can i configure the U-boot for ATI to initialize or how can i write the programm for ATI- EEPROM BIOS?

This is somewhat off topic here. We don't deal with internals of graphics adapter code.

Quoted 1 line

must i install a XF86-Simulator on my board?

You can try enabling the x86 emulator that comesincluded with U-Boot and use this to run the x86 BIOS code on the card like it was done for the AmigaOne board.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Tactical? TACTICAL!?!? Hey, buddy, we went from kilotons to  megatons
several  minutes  ago.  We don't need no stinkin' tactical nukes. (By
the way, do you have change for 10 million people?)           - lwall