ATI Radeon M6-C16h for PPC 440GX
Hello,
i?m using on my custom board with PPC 440GX a ATI M6 Mobility Radeon with kernel 2.6.12.
Now i have to initialize the ati and configure the kernel to support it. I don?t have the BIOS of ATI for PPC and i like to simulate this BIOS with U-boot. How can i configure the U-boot for ATI to initialize or how can i write the programm for ATI- EEPROM BIOS?
must i install a XF86-Simulator on my board?
Roberto Pavon
Quoted 7 lines · In message <000401c5bcfa$42609940$8700a8c0@SN7855> you wrote:
i?m using on my custom board with PPC 440GX a ATI M6 Mobility Radeon with kernel 2.6.12.
Now i have to initialize the ati and configure the kernel to support it. I don?t have the BIOS of ATI for PPC and i like to simulate this BIOS with U-boot. How can i configure the U-boot for ATI to initialize or how can i write the programm for ATI- EEPROM BIOS?
This is somewhat off topic here. We don't deal with internals of graphics adapter code.
Quoted 1 line
must i install a XF86-Simulator on my board?
You can try enabling the x86 emulator that comesincluded with U-Boot and use this to run the x86 BIOS code on the card like it was done for the AmigaOne board.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Tactical? TACTICAL!?!? Hey, buddy, we went from kilotons to megatons several minutes ago. We don't need no stinkin' tactical nukes. (By the way, do you have change for 10 million people?) - lwall