Skip to contentSkip to conversation

Scsi data parity errors on aix7xxx in kernel 2.4.5

DISCUSSION Alok K. Dhir 1 participant 2 messages May 31, 2001

lore
Share & tools
lore
#0 lore raw

Running kernel 2.4.5 with two scsi controllers - scsi0 is a sym53c8xx, scsi1 is aic7xxx.

For the last month or so, I've been getting the following error in my syslog 10 or so times a day:

-----

May 31 14:09:51 dog kernel: scsi1: PCI error Interrupt at seqaddr = 0x8e
May 31 14:09:51 dog kernel: scsi1: Data Parity Error Detected during

address or write data phase
-----

The box is a PIII-750 on an Aopen AX6BC (BX chipset) running at 930Mhz (7.5 * 124Mhz bus speed), with 384 megs of RAM (1*128MB PC100, 2*128MB PC133). I've tried running at 7.5*100 and I still get the errors.

Any advice as to what I should look at to solve this problem?

Thanks

#1 lore raw

Forgot to mention (in case it matters) that I'm running ReiserFS on sdd6 which is hanging off of scsi1.

Quoted 38 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Alok K. Dhir
Sent: Thursday, May 31, 2001 2:42 PM
To: [email protected]
Subject: Scsi data parity errors on aix7xxx in kernel 2.4.5

Running kernel 2.4.5 with two scsi controllers - scsi0 is a sym53c8xx, scsi1 is aic7xxx.

For the last month or so, I've been getting the following error in my syslog 10 or so times a day:

-----

May 31 14:09:51 dog kernel: scsi1: PCI error Interrupt at 

seqaddr = 0x8e May 31 14:09:51 dog kernel: scsi1: Data Parity Error Detected during address or write data phase
-----

The box is a PIII-750 on an Aopen AX6BC (BX chipset) running at 930Mhz (7.5 * 124Mhz bus speed), with 384 megs of RAM (1*128MB PC100, 2*128MB PC133). I've tried running at 7.5*100 and I still get the errors.

Any advice as to what I should look at to solve this problem?

Thanks

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the
FAQ at http://www.tux.org/lkml/