Scsi data parity errors on aix7xxx in kernel 2.4.5
Running kernel 2.4.5 with two scsi controllers - scsi0 is a sym53c8xx, scsi1 is aic7xxx.
For the last month or so, I've been getting the following error in my syslog 10 or so times a day:
-----
May 31 14:09:51 dog kernel: scsi1: PCI error Interrupt at seqaddr = 0x8e May 31 14:09:51 dog kernel: scsi1: Data Parity Error Detected during
address or write data phase
-----
The box is a PIII-750 on an Aopen AX6BC (BX chipset) running at 930Mhz (7.5 * 124Mhz bus speed), with 384 megs of RAM (1*128MB PC100, 2*128MB PC133). I've tried running at 7.5*100 and I still get the errors.
Any advice as to what I should look at to solve this problem?
Thanks
Forgot to mention (in case it matters) that I'm running ReiserFS on sdd6 which is hanging off of scsi1.
Quoted 38 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Alok K. Dhir
Sent: Thursday, May 31, 2001 2:42 PM
To: [email protected]
Subject: Scsi data parity errors on aix7xxx in kernel 2.4.5Running kernel 2.4.5 with two scsi controllers - scsi0 is a sym53c8xx, scsi1 is aic7xxx.
For the last month or so, I've been getting the following error in my syslog 10 or so times a day:
-----
May 31 14:09:51 dog kernel: scsi1: PCI error Interrupt atseqaddr =
0x8eMay 31 14:09:51 dog kernel: scsi1: Data Parity Error Detected during address or write data phase
-----The box is a PIII-750 on an Aopen AX6BC (BX chipset) running at 930Mhz (7.5 * 124Mhz bus speed), with 384 megs of RAM (1*128MB PC100, 2*128MB PC133). I've tried running at 7.5*100 and I still get the errors.
Any advice as to what I should look at to solve this problem?
Thanks
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
Please read the
FAQ at http://www.tux.org/lkml/