Skip to contentSkip to conversation

Standalone hello_world, data abort error on ARM926 (AP)

U-Boot-Users iismail 4 participants 8 messages Jan 31, 2008 – Feb 1, 2008

lore
Share & tools
lore

iismail

author
#0 lore raw

Hi all,

I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.

Board: ARM926 (AB) application baseboard
Tools: CodeSourcery (arm-none-linux-gnueabi-)

I manage to build u-boot successfully as follow
1. make versatileab_config CROSS_COMPILE=arm-none-linux-gnueabi-
2. make all CROSS_COMPILE=arm-none-linux-gnueabi-
Then i flash "u-boot.bin" into the board memory.

Then i load and run the standalone program "hello_world.bin" as follow

VersatileAB # tftp 0xc100000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0xc100000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0xc100000
## Starting application at 0x0C100000 ...
undefined instruction

pc : [<0c100004>]          lr : [<01005d3c>]

sp : 00fddb88 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb0 r6 : 00000002 r5 : 00fddea8 r4 : 0c100000
r3 : 00000000 r2 : 101f1018 r1 : 00fddea8 r0 : 00000001
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...

ARM Versatile/AB926EJ-S Boot Monitor

Version:    V2.0.2
Build Date: Apr 12 2005
Endian:     Little
Quoted 1 line

I notice the load address 0xc100000 is pointing to reserve area according to User Guide Manual from ARM

Reserved (MPMC Chip Select 1, dynamic expansion memory on
Versatile/PB926EJ-S) - - 0x08000000? 0x0FFFFFFF 128MB

Any idea?

Thanks

Signature · 2 lines
View this message in context: http://www.nabble.com/Standalone-hello_world%2C-data-abort-error-on-ARM926-%28AP%29-tp15197260p15197260.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
author
#1 lore raw
Quoted 52 lines · iismail

Hi all,

I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.

Board: ARM926 (AB) application baseboard
Tools: CodeSourcery (arm-none-linux-gnueabi-)

I manage to build u-boot successfully as follow
1. make versatileab_config CROSS_COMPILE=arm-none-linux-gnueabi-
2. make all CROSS_COMPILE=arm-none-linux-gnueabi-
Then i flash "u-boot.bin" into the board memory.

Then i load and run the standalone program "hello_world.bin" as follow

VersatileAB # tftp 0xc100000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0xc100000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0xc100000
## Starting application at 0x0C100000 ....
undefined instruction

pc : [<0c100004>]          lr : [<01005d3c>]

sp : 00fddb88 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb0 r6 : 00000002 r5 : 00fddea8 r4 : 0c100000
r3 : 00000000 r2 : 101f1018 r1 : 00fddea8 r0 : 00000001
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...

ARM Versatile/AB926EJ-S Boot Monitor

Version:    V2.0.2
Build Date: Apr 12 2005
Endian:     Little
Quoted 1 line

I notice the load address 0xc100000 is pointing to reserve area according to User Guide Manual from ARM

Reserved (MPMC Chip Select 1, dynamic expansion memory on Versatile/PB926EJ-S) - - 0x08000000? 0x0FFFFFFF 128MB

Any idea?

Thanks

Signature · 2 lines
View this message in context: http://www.nabble.com/Standalone-hello_world%2C-data-abort-error-on-ARM926-%28AP%29-tp15197260p15202592.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
#2 lore raw
In reply to iismail
Quoted 12 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: 31 January 2008 03:00
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalone hello_world, data abort error on ARM926 (AP)

Quoted 4 lines

Hi all,

I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.

---snip

Quoted 4 lines

Then i load and run the standalone program "hello_world.bin" as follow

VersatileAB # tftp 0xc100000 hello_world.bin Using MAC

How did you come to choose 0xc1000000 - which as you say is Reserved?

Unless you have modified your AB accordingly you must expect problems using a reserved address....

Try somewhere in SDRAM 0x000000 - 0x07FFFFFF (depending on your switch settings) as per your manual

Regards

Peter

#3 lore raw
Quoted 34 lines · Peter Pearse
Quoted 12 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: 31 January 2008 03:00
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalone hello_world, data abort error on ARM926 (AP)

Quoted 4 lines

Hi all,

I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.

---snip

Quoted 4 lines

Then i load and run the standalone program "hello_world.bin" as follow

VersatileAB # tftp 0xc100000 hello_world.bin Using MAC

How did you come to choose 0xc1000000 - which as you say is Reserved?

Unless you have modified your AB accordingly you must expect problems using a reserved address....

Try somewhere in SDRAM 0x000000 - 0x07FFFFFF (depending on your switch settings) as per your manual

Regards

Quoted 7 lines

Peter

Hi Peter

How did you come to choose 0xc1000000 - which as you say is Reserved?

I didn't choose that address, it it was part of the hello_world's Makefile ifeq ($(ARCH),arm)
LOAD_ADDR = 0xc100000
endif

Quoted 1 line

Try somewhere in SDRAM 0x000000 - 0x07FFFFFF (depending on your switch

settings) as per your manual
Still no luck with 0x06000000 which is in the RAM area; 060081fa A __bss_end__
060081fa A __bss_start
060081fa A __bss_start__
060081fa R __data_start
060081fc A __end__
060001fa A __exidx_end
060001fa A __exidx_start
060081fa A _bss_end__
060081fa A _edata
060081fc A _end
06000148 T app_startup
06000124 T do_reset
060000bc T dummy
06000104 T free
060000f4 T free_hdlr
06000114 T get_timer
060000bc T get_version
060000c4 T getc
0600012c T getenv
06000000 T hello_world
060000ec T install_hdlr
060000fc T malloc
060000e4 T printf
060000d4 T putc
060000dc T puts
06000134 T setenv
0600013c T simple_strtoul
060000cc T tstc
0600010c T udelay
0600011c T vprintf

VersatileAB # tftp 0x06000000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0x6000000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0x06000000 hello
## Starting application at 0x06000000 ...
data abort

pc : [<0600015c>]          lr : [<06000014>]

sp : 00fddb78 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb7 r6 : 00fddea8 r5 : 00000002 r4 : 06000000
r3 : 00000000 r2 : 060081fa r1 : 00fddea8 r0 : 00fddea8
Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ...

Regards,

Idris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080131/ad4cc44c/attachment.htm

#4 lore raw
In reply to Peter Pearse

Hi Peter,

Thanks again for your quick reponse,
No matter what address i choose it is not working; below is my memory map

iismail at ubuntu-desktop:~/seda/u-boot/u-bootARMPatched$
arm-none-linux-gnueabi-nm examples/hello_world
030081fa A __bss_end__
030081fa A __bss_start
030081fa A __bss_start__
030081fa R __data_start
030081fc A __end__
030001fa A __exidx_end
030001fa A __exidx_start
030081fa A _bss_end__
030081fa A _edata
030081fc A _end
03000148 T app_startup
03000124 T do_reset
030000bc T dummy
03000104 T free
030000f4 T free_hdlr
03000114 T get_timer
030000bc T get_version
030000c4 T getc
0300012c T getenv
03000000 T hello_world
030000ec T install_hdlr
030000fc T malloc
030000e4 T printf
030000d4 T putc
030000dc T puts
03000134 T setenv
0300013c T simple_strtoul
030000cc T tstc
0300010c T udelay
0300011c T vprintf

VersatileAB # tftp 0x03000000 hello_world.bin
Using MAC Address <X X X X X>
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0x3000000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # to 0x03000000
Unknown command 'to' - try 'help'
VersatileAB # go 0x03000000
## Starting application at 0x03000000 ...
data abort

pc : [<0300015c>]          lr : [<03000014>]

sp : 00fddb78 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb1 r6 : 00fddea8 r5 : 00000001 r4 : 03000000
r3 : 00000000 r2 : 030081fa r1 : 00fddea8 r0 : 00fddea8
Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ...

Quoted 41 lines · Peter Pearse
Quoted 13 lines

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: 31 January 2008 03:00
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalone hello_world, data abort error on ARM926 (AP)

Quoted 4 lines

Hi all,

I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.

---snip

Quoted 4 lines

Then i load and run the standalone program "hello_world.bin" as follow

VersatileAB # tftp 0xc100000 hello_world.bin Using MAC

How did you come to choose 0xc1000000 - which as you say is Reserved?

Unless you have modified your AB accordingly you must expect problems using a reserved address....

Try somewhere in SDRAM 0x000000 - 0x07FFFFFF (depending on your switch settings) as per your manual

Regards

Peter

#5 lore raw
Quoted 7 lines · u-boot-users-bounces at lists.sourceforge.net

Hi Peter,

Thanks again for your quick reponse,
No matter what address i choose it is not working; below is my memory map

03000148 T app_startup

This looks more like an entry point (I'm not too familiar with ARM, so I'm probably wrong)

Quoted 2 lines

VersatileAB # go 0x03000000
## Starting application at 0x03000000 ...

Try go 0x03000148 instead

#6 lore raw
In reply to idris ismail

Idris

Quoted 1 line

No matter what address i choose it is not working; below is my memory map

I guess it isn't a u-boot problem then. I suggest you contact

support at arm.com, mentioning this correspondence....

Regards

Peter

#7 lore raw
In reply to iismail

I have built big standalone application for similar CPU (at92rm9200). I use some RAM address to do so, namely LOAD_ADDR=0x21000000.

See my make rules below.

########################################################################
#
$(ELF): $(OBJS)

                $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
                        -o $@ -e $(notdir $(<:.o=)) $^ $(TOPDIR)/$(LIB)
\
                        -L$(gcclibdir) -lgcc

$(SREC): $(ELF)

                $(OBJCOPY) -O srec $< $@ 2>/dev/null

$(BIN): $(ELF)

                $(OBJCOPY) -O binary $< $@ 2>/dev/null
                cp -f $@ $(AKA_IMAGES_DIR)

System.map: $(ELF)

        @$(NM) $< | \
        grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw]

\)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > System.map

-----Original Message-----
From: [email protected] [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: Wednesday, January 30, 2008 7:00 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalone hello_world, data abort error on ARM926 (AP)

Hi all,

I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.

Board: ARM926 (AB) application baseboard
Tools: CodeSourcery (arm-none-linux-gnueabi-)

I manage to build u-boot successfully as follow
1. make versatileab_config CROSS_COMPILE=arm-none-linux-gnueabi-
2. make all CROSS_COMPILE=arm-none-linux-gnueabi-
Then i flash "u-boot.bin" into the board memory.

Then i load and run the standalone program "hello_world.bin" as follow

VersatileAB # tftp 0xc100000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0xc100000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0xc100000
## Starting application at 0x0C100000 ...
undefined instruction

pc : [<0c100004>]          lr : [<01005d3c>]

sp : 00fddb88 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb0 r6 : 00000002 r5 : 00fddea8 r4 : 0c100000
r3 : 00000000 r2 : 101f1018 r1 : 00fddea8 r0 : 00000001
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...

ARM Versatile/AB926EJ-S Boot Monitor

Version:    V2.0.2
Build Date: Apr 12 2005
Endian:     Little
Quoted 1 line

I notice the load address 0xc100000 is pointing to reserve area according to
User Guide Manual from ARM

Reserved (MPMC Chip Select 1, dynamic expansion memory on
Versatile/PB926EJ-S) - - 0x08000000- 0x0FFFFFFF 128MB

Any idea?

Thanks

Signature · 15 lines
View this message in context:
http://www.nabble.com/Standalone-hello_world%2C-data-abort-error-on-ARM9
26-%28AP%29-tp15197260p15197260.html
Sent from the Uboot - Users mailing list archive at Nabble.com.


------------------------------------------------------------------------
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users