Standalone hello_world, data abort error on ARM926 (AP)
Hi all,
I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.
Board: ARM926 (AB) application baseboard
Tools: CodeSourcery (arm-none-linux-gnueabi-)
I manage to build u-boot successfully as follow
1. make versatileab_config CROSS_COMPILE=arm-none-linux-gnueabi-
2. make all CROSS_COMPILE=arm-none-linux-gnueabi-
Then i flash "u-boot.bin" into the board memory.
Then i load and run the standalone program "hello_world.bin" as follow
VersatileAB # tftp 0xc100000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0xc100000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0xc100000
## Starting application at 0x0C100000 ...
undefined instruction
pc : [<0c100004>] lr : [<01005d3c>]
sp : 00fddb88 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb0 r6 : 00000002 r5 : 00fddea8 r4 : 0c100000
r3 : 00000000 r2 : 101f1018 r1 : 00fddea8 r0 : 00000001
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
ARM Versatile/AB926EJ-S Boot Monitor
Version: V2.0.2 Build Date: Apr 12 2005 Endian: Little
Quoted 1 line
I notice the load address 0xc100000 is pointing to reserve area according to User Guide Manual from ARM
Reserved (MPMC Chip Select 1, dynamic expansion memory on
Versatile/PB926EJ-S) - - 0x08000000? 0x0FFFFFFF 128MB
Any idea?
Thanks
Signature · 2 lines
View this message in context: http://www.nabble.com/Standalone-hello_world%2C-data-abort-error-on-ARM926-%28AP%29-tp15197260p15197260.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 52 lines · iismail
Hi all,
I am having problem running the "
hello_world" examples that comes with u-boot on ARM926 board.Board: ARM926 (AB) application baseboard
Tools: CodeSourcery (arm-none-linux-gnueabi-)I manage to build u-boot successfully as follow
1. makeversatileab_configCROSS_COMPILE=arm-none-linux-gnueabi-
2. make all CROSS_COMPILE=arm-none-linux-gnueabi-
Then i flash "u-boot.bin" into the board memory.Then i load and run the standalone program "hello_world.bin" as follow
VersatileAB # tftp
0xc100000hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address:0xc100000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go0xc100000
## Starting application at0x0C100000....
undefined instructionpc : [<0c100004>] lr : [<01005d3c>]sp :
00fddb88ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 :00fddfdc
r7 :00fddcb0r6 : 00000002 r5 :00fddea8r4 :0c100000
r3 : 00000000 r2 :101f1018r1 :00fddea8r0 : 00000001
Flags: nZCv IRQs off FIQs off ModeSVC_32
Resetting CPU ...ARM Versatile/AB926EJ-S Boot Monitor
Version: V2.0.2 Build Date: Apr 12 2005 Endian: LittleQuoted 1 line
I notice the load address
0xc100000is pointing to reserve area according to User Guide Manual from ARMReserved (MPMC Chip Select 1, dynamic expansion memory on Versatile/PB926EJ-S) - -
0x08000000?0x0FFFFFFF128MBAny idea?
Thanks
Signature · 2 lines
View this message in context: http://www.nabble.com/Standalone-hello_world%2C-data-abort-error-on-ARM926-%28AP%29-tp15197260p15202592.html Sent from the Uboot - Users mailing list archive at Nabble.com.
Quoted 12 lines
-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: 31 January 2008 03:00
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalonehello_world, data abort error on ARM926 (AP)
Quoted 4 lines
Hi all,
I am having problem running the "
hello_world" examples that comes with u-boot on ARM926 board.
---snip
Quoted 4 lines
Then i load and run the standalone program "hello_world.bin" as follow
VersatileAB # tftp
0xc100000hello_world.bin Using MAC
How did you come to choose 0xc1000000 - which as you say is Reserved?
Unless you have modified your AB accordingly you must expect problems using a reserved address....
Try somewhere in SDRAM 0x000000 - 0x07FFFFFF (depending on your switch settings) as per your manual
Regards
Peter
Quoted 34 lines · Peter Pearse
Quoted 12 lines
-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: 31 January 2008 03:00
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalonehello_world, data abort error on ARM926 (AP)Quoted 4 lines
Hi all,
I am having problem running the "
hello_world" examples that comes with u-boot on ARM926 board.---snip
Quoted 4 lines
Then i load and run the standalone program "hello_world.bin" as follow
VersatileAB # tftp
0xc100000hello_world.bin Using MACHow did you come to choose
0xc1000000- which as you say is Reserved?Unless you have modified your AB accordingly you must expect problems using a reserved address....
Try somewhere in SDRAM
0x000000-0x07FFFFFF(depending on your switch settings) as per your manualRegards
Quoted 7 lines
Peter
Hi Peter
How did you come to choose
0xc1000000- which as you say is Reserved?
I didn't choose that address, it it was part of the hello_world's Makefile ifeq ($(ARCH),arm)
LOAD_ADDR = 0xc100000
endif
Quoted 1 line
Try somewhere in SDRAM
0x000000-0x07FFFFFF(depending on your switch
settings) as per your manual
Still no luck with 0x06000000 which is in the RAM area; 060081fa A __bss_end__060081fa A __bss_start060081fa A __bss_start__060081fa R __data_start060081fc A __end__060001fa A __exidx_end060001fa A __exidx_start060081fa A _bss_end__060081fa A _edata060081fc A _end
06000148 T app_startup
06000124 T do_reset060000bc T dummy
06000104 T free060000f4 T free_hdlr
06000114 T get_timer060000bc T get_version060000c4 T getc0600012c T getenv
06000000 T hello_world060000ec T install_hdlr060000fc T malloc060000e4 T printf060000d4 T putc060000dc T puts
06000134 T setenv0600013c T simple_strtoul060000cc T tstc0600010c T udelay0600011c T vprintf
VersatileAB # tftp 0x06000000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0x6000000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0x06000000 hello
## Starting application at 0x06000000 ...
data abort
pc : [<0600015c>] lr : [<06000014>]
sp : 00fddb78 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb7 r6 : 00fddea8 r5 : 00000002 r4 : 06000000
r3 : 00000000 r2 : 060081fa r1 : 00fddea8 r0 : 00fddea8
Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ...
Regards,
Idris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20080131/ad4cc44c/attachment.htm
Hi Peter,
Thanks again for your quick reponse,
No matter what address i choose it is not working; below is my memory map
iismail at ubuntu-desktop:~/seda/u-boot/u-bootARMPatched$
arm-none-linux-gnueabi-nm examples/hello_world
030081fa A __bss_end__
030081fa A __bss_start
030081fa A __bss_start__
030081fa R __data_start
030081fc A __end__
030001fa A __exidx_end
030001fa A __exidx_start
030081fa A _bss_end__
030081fa A _edata
030081fc A _end
03000148 T app_startup
03000124 T do_reset
030000bc T dummy
03000104 T free
030000f4 T free_hdlr
03000114 T get_timer
030000bc T get_version
030000c4 T getc
0300012c T getenv
03000000 T hello_world
030000ec T install_hdlr
030000fc T malloc
030000e4 T printf
030000d4 T putc
030000dc T puts
03000134 T setenv
0300013c T simple_strtoul
030000cc T tstc
0300010c T udelay
0300011c T vprintf
VersatileAB # tftp 0x03000000 hello_world.bin
Using MAC Address <X X X X X>
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0x3000000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # to 0x03000000
Unknown command 'to' - try 'help'
VersatileAB # go 0x03000000
## Starting application at 0x03000000 ...
data abort
pc : [<0300015c>] lr : [<03000014>]
sp : 00fddb78 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb1 r6 : 00fddea8 r5 : 00000001 r4 : 03000000
r3 : 00000000 r2 : 030081fa r1 : 00fddea8 r0 : 00fddea8
Flags: Nzcv IRQs off FIQs off Mode SVC_32 Resetting CPU ...
Quoted 41 lines · Peter Pearse
Quoted 13 lines
-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: 31 January 2008 03:00
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalonehello_world, data abort error on ARM926 (AP)Quoted 4 lines
Hi all,
I am having problem running the "
hello_world" examples that comes with u-boot on ARM926 board.---snip
Quoted 4 lines
Then i load and run the standalone program "hello_world.bin" as follow
VersatileAB # tftp
0xc100000hello_world.bin Using MACHow did you come to choose
0xc1000000- which as you say is Reserved?Unless you have modified your AB accordingly you must expect problems using a reserved address....
Try somewhere in SDRAM
0x000000-0x07FFFFFF(depending on your switch settings) as per your manualRegards
Peter
Quoted 7 lines · u-boot-users-bounces at lists.sourceforge.net
Hi Peter,
Thanks again for your quick reponse,
No matter what address i choose it is not working; below is my memory map03000148 T
app_startup
This looks more like an entry point (I'm not too familiar with ARM, so I'm probably wrong)
Quoted 2 lines
VersatileAB # go
0x03000000
## Starting application at0x03000000...
Try go 0x03000148 instead
Idris
Quoted 1 line
No matter what address i choose it is not working; below is my memory map
I guess it isn't a u-boot problem then. I suggest you contact
support at arm.com, mentioning this correspondence....
Regards
Peter
I have built big standalone application for similar CPU (at92rm9200). I use some RAM address to do so, namely LOAD_ADDR=0x21000000.
See my make rules below.
########################################################################
#
$(ELF): $(OBJS)
$(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
-o $@ -e $(notdir $(<:.o=)) $^ $(TOPDIR)/$(LIB)
\
-L$(gcclibdir) -lgcc$(SREC): $(ELF)
$(OBJCOPY) -O srec $< $@ 2>/dev/null
$(BIN): $(ELF)
$(OBJCOPY) -O binary $< $@ 2>/dev/null
cp -f $@ $(AKA_IMAGES_DIR)System.map: $(ELF)
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw]\)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > System.map
-----Original Message-----
From: [email protected] [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of iismail
Sent: Wednesday, January 30, 2008 7:00 PM
To: u-boot-users at lists.sourceforge.net
Subject: [U-Boot-Users] Standalone hello_world, data abort error on ARM926 (AP)
Hi all,
I am having problem running the "hello_world" examples that comes with u-boot on ARM926 board.
Board: ARM926 (AB) application baseboard
Tools: CodeSourcery (arm-none-linux-gnueabi-)
I manage to build u-boot successfully as follow
1. make versatileab_config CROSS_COMPILE=arm-none-linux-gnueabi-
2. make all CROSS_COMPILE=arm-none-linux-gnueabi-
Then i flash "u-boot.bin" into the board memory.
Then i load and run the standalone program "hello_world.bin" as follow
VersatileAB # tftp 0xc100000 hello_world.bin
Using MAC Address 00:02:F7:00:10:31
TFTP from server 192.168.1.105; our IP address is 192.168.1.109 Filename 'hello_world.bin'.
Load address: 0xc100000
Loading: #
done
Bytes transferred = 506 (1fa hex)
VersatileAB # go 0xc100000
## Starting application at 0x0C100000 ...
undefined instruction
pc : [<0c100004>] lr : [<01005d3c>]
sp : 00fddb88 ip : ffffffff fp : 00000000
r10: 00000000 r9 : 00000000 r8 : 00fddfdc
r7 : 00fddcb0 r6 : 00000002 r5 : 00fddea8 r4 : 0c100000
r3 : 00000000 r2 : 101f1018 r1 : 00fddea8 r0 : 00000001
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
ARM Versatile/AB926EJ-S Boot Monitor
Version: V2.0.2 Build Date: Apr 12 2005 Endian: Little
Quoted 1 line
I notice the load address 0xc100000 is pointing to reserve area according to
User Guide Manual from ARM
Reserved (MPMC Chip Select 1, dynamic expansion memory on
Versatile/PB926EJ-S) - - 0x08000000- 0x0FFFFFFF 128MB
Any idea?
Thanks
Signature · 15 lines
View this message in context: http://www.nabble.com/Standalone-hello_world%2C-data-abort-error-on-ARM9 26-%28AP%29-tp15197260p15197260.html Sent from the Uboot - Users mailing list archive at Nabble.com. ------------------------------------------------------------------------ - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users at lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users