Best gigabit card for linux
Hi Alan,
I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.
Thanks for your help,
Abe Hayhurst
In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.
http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:
Packet engines Hamachi card
3ware escalade 6800
2.2.16 kernel.
Cisco 6500
10 - 20 client machines each with eepro100 cards
Colin...
Quoted 21 lines · Abe Hayhurst
Hi Alan,
I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.
Thanks for your help,
Abe Hayhurst
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
colin,
40 MBytes per second? that's not really very good for a gigabit card. (32% of line speed). our experience with the 2.4 kernel (pre-zerocopy) has been that we can get 99.3% (around 125 MBytes/sec) before cpu utilization gets to 100%. this was using acenic's (now 3com but 3com appears to not be selling them. sigh.).
todd underwood
[email protected]
Quoted 45 lines · Colin Frank
Date: Fri, 21 Sep 2001 21:36:10 -0700
From: Colin Frank <[email protected]>
To: Abe Hayhurst <[email protected]>
Cc: [email protected]
Subject: Re: Best gigabit card for linuxIn the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.
http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:Packet engines Hamachi card 3ware escalade 6800 2.2.16 kernel. Cisco 6500 10 - 20 client machines each with eepro100 cardsColin...
Quoted 12 lines · Abe Hayhurst
Hi Alan,
I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.
Thanks for your help,
Quoted 9 lines
Abe Hayhurst
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 6 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
=========================================================
Todd Underwood, [email protected]
=========================================================
Quoted 6 lines · Colin Frank
In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.
http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:
Quoted 7 lines
Packet engines Hamachi card 3ware escalade 6800 2.2.16 kernel. Cisco 6500 10 - 20 client machines each with eepro100 cardsColin...
I've had good luck with the Netgear GA620, and it's very cheap too... I was testing on the 2.4.3 kernel and RH 7.0. It worked w/out problem.
It's a fiber NIC.
Signature · 3 lines
Ben Greear <[email protected]> <[email protected]> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear
Hi,
I ordered 2 NSC-based giga ethernet cards (copper) and I was able to
get 54.4 Megabytes/s sustained (between an amd athlon 1200 MHz and an athlon 1000 MHz) on kernel v2.4.5.
Since these card cost $45 each, i HIGHLY recommend them. The actualy
manufacturer is a company called Cameo in Taiwan.
--Seth
Quoted 43 lines · Colin Frank
In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.
http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:Packet engines Hamachi card 3ware escalade 6800 2.2.16 kernel. Cisco 6500 10 - 20 client machines each with eepro100 cardsColin...
Quoted 12 lines · Abe Hayhurst
Hi Alan,
I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.
Thanks for your help,
Quoted 9 lines
Abe Hayhurst
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 9 lines · Seth Goldberg
Hi,
I ordered 2 NSC-based giga ethernet cards (copper) and I was able to
get 54.4 Megabytes/s sustained (between an amd athlon 1200 MHz and an athlon 1000 MHz) on kernel v2.4.5.Since these card cost $45 each, i HIGHLY recommend them. The actualy
manufacturer is a company called Cameo in Taiwan.
Are those available in 64 bit pci slot format? I assume for that price they run in 32 bit slots (which is no doubt a bottleneck on a real gigabit).
D. Stimits, [email protected]
Quoted 52 lines
--Seth
Quoted 38 lines · Colin Frank
In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.
http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:Packet engines Hamachi card 3ware escalade 6800 2.2.16 kernel. Cisco 6500 10 - 20 client machines each with eepro100 cardsColin...
Quoted 12 lines · Abe Hayhurst
Hi Alan,
I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.
Thanks for your help,
Quoted 9 lines
Abe Hayhurst
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/Quoted 5 lines
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line · D. Stimits
Are those available in 64 bit pci slot format?
Yep
http://www.dlink.com/products/gigabit/dge550t/
Quoted 2 lines
I assume for that price they run in 32 bit slots (which is no doubt a bottleneck on a real gigabit).
$85 for 64bit pci gigglebit ethernet nic isnt bad...
-Dan
Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]