Skip to contentSkip to conversation

Best gigabit card for linux

DISCUSSION Abe Hayhurst 7 participants 7 messages Sep 18, 2001 – Oct 3, 2001

lore
Share & tools
lore
#0 lore raw

Hi Alan,

I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.

Thanks for your help,

Abe Hayhurst

#1 lore raw

In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.

http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:
Packet engines Hamachi card
3ware escalade 6800
2.2.16 kernel.
Cisco 6500
10 - 20 client machines each with eepro100 cards

Colin...

Quoted 21 lines · Abe Hayhurst

Hi Alan,

I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.

Thanks for your help,

Abe Hayhurst

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

colin,

40 MBytes per second? that's not really very good for a gigabit card. (32% of line speed). our experience with the 2.4 kernel (pre-zerocopy) has been that we can get 99.3% (around 125 MBytes/sec) before cpu utilization gets to 100%. this was using acenic's (now 3com but 3com appears to not be selling them. sigh.).

todd underwood
[email protected]

Quoted 45 lines · Colin Frank

Date: Fri, 21 Sep 2001 21:36:10 -0700
From: Colin Frank <[email protected]>
To: Abe Hayhurst <[email protected]>
Cc: [email protected]
Subject: Re: Best gigabit card for linux

In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.

http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:

    Packet engines Hamachi card
    3ware escalade 6800
    2.2.16 kernel.
    Cisco 6500
    10 - 20 client machines each with eepro100 cards

Colin...

Quoted 12 lines · Abe Hayhurst

Hi Alan,

I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.

Thanks for your help,

Quoted 9 lines

Abe Hayhurst

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Quoted 6 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

=========================================================
Todd Underwood, [email protected]

=========================================================

#3 lore raw
In reply to Abe Hayhurst
Quoted 6 lines · Colin Frank

In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.

http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:

Quoted 7 lines
    Packet engines Hamachi card
    3ware escalade 6800
    2.2.16 kernel.
    Cisco 6500
    10 - 20 client machines each with eepro100 cards

Colin...

I've had good luck with the Netgear GA620, and it's very cheap too... I was testing on the 2.4.3 kernel and RH 7.0. It worked w/out problem.

It's a fiber NIC.

Signature · 3 lines
Ben Greear <[email protected]>          <[email protected]>
President of Candela Technologies Inc      http://www.candelatech.com
ScryMUD:  http://scry.wanfear.com     http://scry.wanfear.com/~greear
#4 lore raw
In reply to Abe Hayhurst

Hi,

I ordered 2 NSC-based giga ethernet cards (copper) and I was able to
get 54.4 Megabytes/s sustained (between an amd athlon 1200 MHz and an athlon 1000 MHz) on kernel v2.4.5.

Since these card cost $45 each, i HIGHLY recommend them. The actualy
manufacturer is a company called Cameo in Taiwan.

--Seth

Quoted 43 lines · Colin Frank

In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.

http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:

    Packet engines Hamachi card
    3ware escalade 6800
    2.2.16 kernel.
    Cisco 6500
    10 - 20 client machines each with eepro100 cards

Colin...

Quoted 12 lines · Abe Hayhurst

Hi Alan,

I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.

Thanks for your help,

Quoted 9 lines

Abe Hayhurst

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
In reply to Abe Hayhurst
Quoted 9 lines · Seth Goldberg

Hi,

I ordered 2 NSC-based giga ethernet cards (copper) and I was able to
get 54.4 Megabytes/s sustained (between an amd athlon 1200 MHz and an athlon 1000 MHz) on kernel v2.4.5.

Since these card cost $45 each, i HIGHLY recommend them. The actualy
manufacturer is a company called Cameo in Taiwan.

Are those available in 64 bit pci slot format? I assume for that price they run in 32 bit slots (which is no doubt a bottleneck on a real gigabit).

D. Stimits, [email protected]

Quoted 52 lines

--Seth

Quoted 38 lines · Colin Frank

In the following test. I was able to achieve close to 40 MegaBytes per second using the packet engines Hamachi driver.

http://www.linuxcare.com/labs/sol-val/3w-esc6800-web.epl
Test done with:

    Packet engines Hamachi card
    3ware escalade 6800
    2.2.16 kernel.
    Cisco 6500
    10 - 20 client machines each with eepro100 cards

Colin...

Quoted 12 lines · Abe Hayhurst

Hi Alan,

I wanted to know your opinion as to which combination of gigabit cards (both fiber and copper) and drivers would yield the best performance (mostly transferring large files from server to client, but also latency) in Linux. I am not a programmer, a kernel tweaker, or a driver developer. I need a card that either has a driver that comes with Red Hat Linux 7.1 or is easy to install and needs minimal tweaks to the driver. I am currently considering cards from 3Com (Alteon), Broadcom, Intel, and SysKonnect.

Thanks for your help,

Quoted 9 lines

Abe Hayhurst

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Quoted 5 lines

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#6 lore raw
Quoted 1 line · D. Stimits

Are those available in 64 bit pci slot format?

Yep

http://www.dlink.com/products/gigabit/dge550t/

Quoted 2 lines

I assume for that price they run in 32 bit slots (which is no doubt a bottleneck on a real gigabit).

$85 for 64bit pci gigglebit ethernet nic isnt bad...

http://www.goroyalpc.com/no_config_product.asp?m_cat=s_network&cat=networkcard&action=show&id=140_networkcard

-Dan

Signature · 1 line
[-] Omae no subete no kichi wa ore no mono da. [-]