Skip to contentSkip to conversation

MT29F8G08MAAWC support in u-boot

U-Boot Dimitar Penev 1 participant 1 message Nov 3, 2008

lore
Share & tools
lore
#0 lore raw

Hi Guys,

Our Blackfin based system was successfully using MT29F2G08AABWP NAND flash and u-boot.
Recently due to the limited availability we decided to migrate to the new nand chips from Micron MT29F8G08MAAWC
It uses new technology Multi-Level Cell

However we are still not able to make it working. The capacity, bus width, etc are stored in the flash itself.
The u-boot's nand driver however reads the chip ID and recognize this chip as 16 bit wide
though from the partnumber it is clear that it is 8 bit device.

Is there someone which know what we need to look at so we make those new chips from Micron working with u-boot nand driver.

Thank you for your time!
Dimitar