Skip to contentSkip to conversation

VT82C686A corruption with 2.4.x

DISCUSSION Nicholas Knight 1 participant 1 message Feb 2, 2001

lore
Share & tools
lore
#0 lore raw

oops, I forgot to send this to linux-kernel as well...

----- Original Message -----
From: "Nicholas Knight" <[email protected]>
To: "David D.W. Downey" <[email protected]>
Sent: Thursday, February 01, 2001 5:24 AM
Subject: Re: VT82C686A corruption with 2.4.x

Quoted 11 lines

----- Original Message -----
From: "David D.W. Downey" <[email protected]>
To: "David Riley" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 01, 2001 4:51 AM
Subject: Re: VT82C686A corruption with 2.4.x

Quoted 2 lines

Yeah, I'm seriously beginning to think it's a board specific issue. If I drop the RAM count down to 768MB I get far less drops in app deaths

Quoted 8 lines

<....>

Quoted 4 lines

Right now I've got the full 1GB in there. What I'm seeing now is application deaths, occational X11 lockups, but SUPRIZE! SUPRIZE! no more drive corruptions since I removed the DMA flag from the drives, disabled DMA use in the BIOS and replaced the ATA66 cable with an ATA33.

(the following is a lot of conjecture and doesn't wholly fit the

information

Quoted 1 line

avalible to me on this problem, but maybe it'll help bring about other

ideas

Quoted 4 lines

that will lead to a fix for this)

OK, I haven't had a chance to get 2.4 up and running yet, but yesterday I was troubleshooting some lockup issues in Win2k and there was a slim

chance

Quoted 2 lines

that it might have had to do with overheating of the chipset that controls the RAM on the machine; but it turned out to be something of a driver

issue.

Quoted 3 lines

However this got me thinking more about heat... this *really* is sounding more and more like a heat problem to me... esspecialy if it might be board specific, since there might be something in the specific designs that

causes

Quoted 3 lines

higher levels of heat.
I *KNOW* that it seems unlikely since no other OS is exhibiting these problems to my knowledge (including linux 2.2.*) but what if? Could there

be

Quoted 3 lines

something in 2.4 making it more sensitive to errors related to heat? Could 2.4 somehow be making the HDD controllers run hotter?
Prehaps we should start collecting average system tempatures of systems

that

Quoted 8 lines

display this problem, esspecialy while running 2.4.x both with and without DMA enabled.

<end conjecture spoken by someone without enough information avalible to him>

-NK

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/