VT82C686A corruption with 2.4.x
oops, I forgot to send this to linux-kernel as well...
----- Original Message -----
From: "Nicholas Knight" <[email protected]>
To: "David D.W. Downey" <[email protected]>
Sent: Thursday, February 01, 2001 5:24 AM
Subject: Re: VT82C686A corruption with 2.4.x
Quoted 11 lines
----- Original Message -----
From: "David D.W. Downey" <[email protected]>
To: "David Riley" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, February 01, 2001 4:51 AM
Subject: Re: VT82C686A corruption with 2.4.xQuoted 2 lines
Yeah, I'm seriously beginning to think it's a board specific issue. If I drop the RAM count down to 768MB I get far less drops in app deaths
Quoted 8 lines
<....>
Quoted 4 lines
Right now I've got the full 1GB in there. What I'm seeing now is application deaths, occational X11 lockups, but SUPRIZE! SUPRIZE! no more drive corruptions since I removed the DMA flag from the drives, disabled DMA use in the BIOS and replaced the ATA66 cable with an ATA33.
(the following is a lot of conjecture and doesn't wholly fit the
information
Quoted 1 line
avalible to me on this problem, but maybe it'll help bring about other
ideas
Quoted 4 lines
that will lead to a fix for this)
OK, I haven't had a chance to get 2.4 up and running yet, but yesterday I was troubleshooting some lockup issues in Win2k and there was a slim
chance
Quoted 2 lines
that it might have had to do with overheating of the chipset that controls the RAM on the machine; but it turned out to be something of a driver
issue.
Quoted 3 lines
However this got me thinking more about heat... this *really* is sounding more and more like a heat problem to me... esspecialy if it might be board specific, since there might be something in the specific designs that
causes
Quoted 3 lines
higher levels of heat.
I *KNOW* that it seems unlikely since no other OS is exhibiting these problems to my knowledge (including linux 2.2.*) but what if? Could there
be
Quoted 3 lines
something in 2.4 making it more sensitive to errors related to heat? Could 2.4 somehow be making the HDD controllers run hotter?
Prehaps we should start collecting average system tempatures of systems
that
Quoted 8 lines
display this problem, esspecialy while running 2.4.x both with and without DMA enabled.
<end conjecture spoken by someone without enough information avalible to him>
-NK
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/