Skip to contentSkip to conversation

KVM: allow listener to stop all vcpus before

PATCH In review Emanuele Giuseppe Esposito 4 participants 13 messages Nov 11, 2022 – Dec 2, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover KVM: allow listener to stop all vcpus before

QEMU needs to perform memslots operations like merging and splitting, and each operation requires more than a single ioctl. Therefore if a vcpu is concurrently reading the same memslots, it could end up reading something that was temporarly deleted. For example, merging two memslots into one would imply:
DELETE(m1)
DELETE(m2)
CREATE(m1+m2)

And a vcpu could attempt to read m2 right after it is deleted, but before the new one is created.

This approach is 100% QEMU-based. No KVM API modification is involved, but implies that QEMU must make sure no new ioctl is running and all vcpus are stopped.

The logic and code are basically taken from David Hildenbrand proposal given a while ago while reviewing a previous attempt where I suggested to solve the above problem directly in KVM by extending its API.

This is the original code:
https://github.com/davidhildenbrand/qemu/commit/86b1bf546a8d00908e33f7362b0b61e2be8dbb7a

I just split the patch in three smaller patches, and used a QemuLockCnt instead of counter + mutex.

RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1979276

Emanuele
---
v3:
* minor fixes on comments and docs
* improved accel_ioctl_inhibit_begin
* drop QSIMPLEQ_REMOVE from kvm_commit

v2:
* use QemuEvent instead of spinning in ioctl_inhibit_begin
* move the blocker API in a separate file and header, so that other accel can use it if they want.

David Hildenbrand (1):
kvm: Atomic memslot updates

Emanuele Giuseppe Esposito (2):
accel: introduce accelerator blocker API
KVM: keep track of running ioctls

 accel/accel-blocker.c          | 154 +++++++++++++++++++++++++++++++++
 accel/kvm/kvm-all.c            | 108 ++++++++++++++++++++---
 accel/meson.build              |   2 +-
 hw/core/cpu-common.c           |   2 +
 include/hw/core/cpu.h          |   3 +
 include/sysemu/accel-blocker.h |  56 ++++++++++++
 include/sysemu/kvm_int.h       |   8 ++
 7 files changed, 321 insertions(+), 12 deletions(-)
 create mode 100644 accel/accel-blocker.c
 create mode 100644 include/sysemu/accel-blocker.h
Signature · 1 line
2.31.1
#1 lore raw

PATCH v3 1/3 accel: introduce accelerator blocker API

This API allows the accelerators to prevent vcpus from issuing new ioctls while execting a critical section marked with the accel_ioctl_inhibit_begin/end functions.

Note that all functions submitting ioctls must mark where the ioctl is being called with accel_{cpu_}ioctl_begin/end().

This API requires the caller to always hold the BQL. API documentation is in sysemu/accel-blocker.h

Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt (to minimize cache line bouncing) to keep avoid that new ioctls run when the critical section starts, and a QemuEvent to wait that all running ioctls finish.

---
 accel/accel-blocker.c          | 154 +++++++++++++++++++++++++++++++++
 accel/meson.build              |   2 +-
 hw/core/cpu-common.c           |   2 +
 include/hw/core/cpu.h          |   3 +
 include/sysemu/accel-blocker.h |  56 ++++++++++++
 5 files changed, 216 insertions(+), 1 deletion(-)
 create mode 100644 accel/accel-blocker.c
 create mode 100644 include/sysemu/accel-blocker.h
accel/accel-blocker.c new file +154 -0
new file mode 100644
index 0000000000..1e7f423462
@@ -0,0 +1,154 @@
+/*
+ * Lock to inhibit accelerator ioctls
+ *
+ * Copyright (c) 2022 Red Hat Inc.
+ *
+ * Author: Emanuele Giuseppe Esposito       <[email protected]>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/thread.h"
+#include "qemu/main-loop.h"
+#include "hw/core/cpu.h"
+#include "sysemu/accel-blocker.h"
+
+static QemuLockCnt accel_in_ioctl_lock;
+static QemuEvent accel_in_ioctl_event;
+
+void accel_blocker_init(void)
+{
+    qemu_lockcnt_init(&accel_in_ioctl_lock);
+    qemu_event_init(&accel_in_ioctl_event, false);
+}
+
+void accel_ioctl_begin(void)
+{
+    if (likely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    /* block if lock is taken in kvm_ioctl_inhibit_begin() */
+    qemu_lockcnt_inc(&accel_in_ioctl_lock);
+}
+
+void accel_ioctl_end(void)
+{
+    if (likely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    qemu_lockcnt_dec(&accel_in_ioctl_lock);
+    /* change event to SET. If event was BUSY, wake up all waiters */
+    qemu_event_set(&accel_in_ioctl_event);
+}
+
+void accel_cpu_ioctl_begin(CPUState *cpu)
+{
+    if (unlikely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    /* block if lock is taken in kvm_ioctl_inhibit_begin() */
+    qemu_lockcnt_inc(&cpu->in_ioctl_lock);
+}
+
+void accel_cpu_ioctl_end(CPUState *cpu)
+{
+    if (unlikely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    qemu_lockcnt_dec(&cpu->in_ioctl_lock);
+    /* change event to SET. If event was BUSY, wake up all waiters */
+    qemu_event_set(&accel_in_ioctl_event);
+}
+
+static bool accel_has_to_wait(void)
+{
+    CPUState *cpu;
+    bool needs_to_wait = false;
+
+    CPU_FOREACH(cpu) {
+        if (qemu_lockcnt_count(&cpu->in_ioctl_lock)) {
+            /* exit the ioctl, if vcpu is running it */
+            qemu_cpu_kick(cpu);
+            needs_to_wait = true;
+        }
+    }
+
+    return needs_to_wait || qemu_lockcnt_count(&accel_in_ioctl_lock);
+}
+
+void accel_ioctl_inhibit_begin(void)
+{
+    CPUState *cpu;
+
+    /*
+     * We allow to inhibit only when holding the BQL, so we can identify
+     * when an inhibitor wants to issue an ioctl easily.
+     */
+    g_assert(qemu_mutex_iothread_locked());
+
+    /* Block further invocations of the ioctls outside the BQL.  */
+    CPU_FOREACH(cpu) {
+        qemu_lockcnt_lock(&cpu->in_ioctl_lock);
+    }
+    qemu_lockcnt_lock(&accel_in_ioctl_lock);
+
+    /* Keep waiting until there are running ioctls */
+    while (true) {
+
+        /* Reset event to FREE. */
+        qemu_event_reset(&accel_in_ioctl_event);
+
+        if (accel_has_to_wait()) {
+            /*
+             * If event is still FREE, and there are ioctls still in progress,
+             * wait.
+             *
+             *  If an ioctl finishes before qemu_event_wait(), it will change
+             * the event state to SET. This will prevent qemu_event_wait() from
+             * blocking, but it's not a problem because if other ioctls are
+             * still running the loop will iterate once more and reset the event
+             * status to FREE so that it can wait properly.
+             *
+             * If an ioctls finishes while qemu_event_wait() is blocking, then
+             * it will be waken up, but also here the while loop makes sure
+             * to re-enter the wait if there are other running ioctls.
+             */
+            qemu_event_wait(&accel_in_ioctl_event);
+        } else {
+            /* No ioctl is running */
+            return;
+        }
+    }
+}
+
+void accel_ioctl_inhibit_end(void)
+{
+    CPUState *cpu;
+
+    qemu_lockcnt_unlock(&accel_in_ioctl_lock);
+    CPU_FOREACH(cpu) {
+        qemu_lockcnt_unlock(&cpu->in_ioctl_lock);
+    }
+}
+
accel/meson.build +1 -1
index b9a963cf80..a0d49c4f31 100644
@@ -1,4 +1,4 @@
-specific_ss.add(files('accel-common.c'))
+specific_ss.add(files('accel-common.c', 'accel-blocker.c'))
 softmmu_ss.add(files('accel-softmmu.c'))
 user_ss.add(files('accel-user.c'))
 
hw/core/cpu-common.c +2 -0
index f9fdd46b9d..8d6a4b1b65 100644
@@ -237,6 +237,7 @@ static void cpu_common_initfn(Object *obj)
     cpu->nr_threads = 1;
 
     qemu_mutex_init(&cpu->work_mutex);
+    qemu_lockcnt_init(&cpu->in_ioctl_lock);
     QSIMPLEQ_INIT(&cpu->work_list);
     QTAILQ_INIT(&cpu->breakpoints);
     QTAILQ_INIT(&cpu->watchpoints);
@@ -248,6 +249,7 @@ static void cpu_common_finalize(Object *obj)
 {
     CPUState *cpu = CPU(obj);
 
+    qemu_lockcnt_destroy(&cpu->in_ioctl_lock);
     qemu_mutex_destroy(&cpu->work_mutex);
 }
 
include/hw/core/cpu.h +3 -0
index f9b58773f7..15053663bc 100644
@@ -397,6 +397,9 @@ struct CPUState {
     uint32_t kvm_fetch_index;
     uint64_t dirty_pages;
 
+    /* Use by accel-block: CPU is executing an ioctl() */
+    QemuLockCnt in_ioctl_lock;
+
     /* Used for events with 'vcpu' and *without* the 'disabled' properties */
     DECLARE_BITMAP(trace_dstate_delayed, CPU_TRACE_DSTATE_MAX_EVENTS);
     DECLARE_BITMAP(trace_dstate, CPU_TRACE_DSTATE_MAX_EVENTS);
include/sysemu/accel-blocker.h new file +56 -0

56 lines not on this page · raw message

Signature · 1 line
2.31.1
Reviewed-by on v3 1/3
#2 lore raw

Re: [PATCH v3 1/3] accel: introduce accelerator blocker API

Quoted 23 lines · Emanuele Giuseppe Esposito

This API allows the accelerators to prevent vcpus from issuing new ioctls while execting a critical section marked with the accel_ioctl_inhibit_begin/end functions.

Note that all functions submitting ioctls must mark where the ioctl is being called with accel_{cpu_}ioctl_begin/end().

This API requires the caller to always hold the BQL. API documentation is in sysemu/accel-blocker.h

Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt (to minimize cache line bouncing) to keep avoid that new ioctls run when the critical section starts, and a QemuEvent to wait that all running ioctls finish.

---
  accel/accel-blocker.c          | 154 +++++++++++++++++++++++++++++++++
  accel/meson.build              |   2 +-
  hw/core/cpu-common.c           |   2 +
  include/hw/core/cpu.h          |   3 +
  include/sysemu/accel-blocker.h |  56 ++++++++++++
  5 files changed, 216 insertions(+), 1 deletion(-)
Quoted 2 lines

create mode 100644 accel/accel-blocker.c create mode 100644 include/sysemu/accel-blocker.h

#3 lore raw

Re: [PATCH v3 1/3] accel: introduce accelerator blocker API

Quoted 3 lines · Philippe Mathieu-Daudé
Quoted 2 lines · Emanuele Giuseppe Esposito

This API allows the accelerators to prevent vcpus from issuing new ioctls while execting a critical section marked with the

Typo "executing".

Quoted 26 lines
Quoted 20 lines

accel_ioctl_inhibit_begin/end functions.

Note that all functions submitting ioctls must mark where the ioctl is being called with accel_{cpu_}ioctl_begin/end().

This API requires the caller to always hold the BQL. API documentation is in sysemu/accel-blocker.h

Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt (to minimize cache line bouncing) to keep avoid that new ioctls run when the critical section starts, and a QemuEvent to wait that all running ioctls finish.

---
  accel/accel-blocker.c          | 154 +++++++++++++++++++++++++++++++++ accel/meson.build              |   2 +- hw/core/cpu-common.c           |   2 + include/hw/core/cpu.h          |   3 + include/sysemu/accel-blocker.h |  56 ++++++++++++

Quoted 3 lines
  5 files changed, 216 insertions(+), 1 deletion(-)

  create mode 100644 accel/accel-blocker.c create mode 100644 include/sysemu/accel-blocker.h

#4 lore raw

Re: [PATCH v3 1/3] accel: introduce accelerator blocker API

In reply to Emanuele Giuseppe Esposito
Quoted 293 lines · Emanuele Giuseppe Esposito

This API allows the accelerators to prevent vcpus from issuing new ioctls while execting a critical section marked with the accel_ioctl_inhibit_begin/end functions.

Note that all functions submitting ioctls must mark where the ioctl is being called with accel_{cpu_}ioctl_begin/end().

This API requires the caller to always hold the BQL. API documentation is in sysemu/accel-blocker.h

Internally, it uses a QemuLockCnt together with a per-CPU QemuLockCnt (to minimize cache line bouncing) to keep avoid that new ioctls run when the critical section starts, and a QemuEvent to wait that all running ioctls finish.

---
 accel/accel-blocker.c          | 154
+++++++++++++++++++++++++++++++++
 accel/meson.build              |   2 +-
 hw/core/cpu-common.c           |   2 +
 include/hw/core/cpu.h          |   3 +
 include/sysemu/accel-blocker.h |  56 ++++++++++++
 5 files changed, 216 insertions(+), 1 deletion(-)
 create mode 100644 accel/accel-blocker.c
 create mode 100644 include/sysemu/accel-blocker.h
accel/accel-blocker.c new file +8 -0
new file mode 100644
index 0000000000..1e7f423462
@@ -0,0 +1,154 @@
+/*
+ * Lock to inhibit accelerator ioctls
+ *
+ * Copyright (c) 2022 Red Hat Inc.
+ *
+ * Author: Emanuele Giuseppe Esposito       <[email protected]>
+ *
+ * Permission is hereby granted, free of charge, to any person

obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */

accel/accel-blocker.c new file +34 -0
+
+#include "qemu/osdep.h"
+#include "qemu/thread.h"
+#include "qemu/main-loop.h"
+#include "hw/core/cpu.h"
+#include "sysemu/accel-blocker.h"
+
+static QemuLockCnt accel_in_ioctl_lock;
+static QemuEvent accel_in_ioctl_event;
+
+void accel_blocker_init(void)
+{
+    qemu_lockcnt_init(&accel_in_ioctl_lock);
+    qemu_event_init(&accel_in_ioctl_event, false);
+}
+
+void accel_ioctl_begin(void)
+{
+    if (likely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    /* block if lock is taken in kvm_ioctl_inhibit_begin() */
+    qemu_lockcnt_inc(&accel_in_ioctl_lock);
+}
+
+void accel_ioctl_end(void)
+{
+    if (likely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    qemu_lockcnt_dec(&accel_in_ioctl_lock);
+    /* change event to SET. If event was BUSY, wake up all waiters

*/

accel/accel-blocker.c new file +21 -0
+    qemu_event_set(&accel_in_ioctl_event);
+}
+
+void accel_cpu_ioctl_begin(CPUState *cpu)
+{
+    if (unlikely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    /* block if lock is taken in kvm_ioctl_inhibit_begin() */
+    qemu_lockcnt_inc(&cpu->in_ioctl_lock);
+}
+
+void accel_cpu_ioctl_end(CPUState *cpu)
+{
+    if (unlikely(qemu_mutex_iothread_locked())) {
+        return;
+    }
+
+    qemu_lockcnt_dec(&cpu->in_ioctl_lock);
+    /* change event to SET. If event was BUSY, wake up all waiters

*/

accel/accel-blocker.c new file +17 -0
+    qemu_event_set(&accel_in_ioctl_event);
+}
+
+static bool accel_has_to_wait(void)
+{
+    CPUState *cpu;
+    bool needs_to_wait = false;
+
+    CPU_FOREACH(cpu) {
+        if (qemu_lockcnt_count(&cpu->in_ioctl_lock)) {
+            /* exit the ioctl, if vcpu is running it */
+            qemu_cpu_kick(cpu);
+            needs_to_wait = true;
+        }
+    }
+
+    return needs_to_wait ||

qemu_lockcnt_count(&accel_in_ioctl_lock);

accel/accel-blocker.c new file +8 -0
+}
+
+void accel_ioctl_inhibit_begin(void)
+{
+    CPUState *cpu;
+
+    /*
+     * We allow to inhibit only when holding the BQL, so we can

identify

accel/accel-blocker.c new file +19 -0
+     * when an inhibitor wants to issue an ioctl easily.
+     */
+    g_assert(qemu_mutex_iothread_locked());
+
+    /* Block further invocations of the ioctls outside the BQL.  */
+    CPU_FOREACH(cpu) {
+        qemu_lockcnt_lock(&cpu->in_ioctl_lock);
+    }
+    qemu_lockcnt_lock(&accel_in_ioctl_lock);
+
+    /* Keep waiting until there are running ioctls */
+    while (true) {
+
+        /* Reset event to FREE. */
+        qemu_event_reset(&accel_in_ioctl_event);
+
+        if (accel_has_to_wait()) {
+            /*
+             * If event is still FREE, and there are ioctls still in

progress,

accel/accel-blocker.c new file +3 -0
+             * wait.
+             *
+             *  If an ioctl finishes before qemu_event_wait(), it

will change
+ * the event state to SET. This will prevent
qemu_event_wait() from
+ * blocking, but it's not a problem because if other
ioctls are
+ * still running the loop will iterate once more and
reset the event

accel/accel-blocker.c new file +3 -0
+             * status to FREE so that it can wait properly.
+             *
+             * If an ioctls finishes while qemu_event_wait() is

blocking, then
+ * it will be waken up, but also here the while loop
makes sure
+ * to re-enter the wait if there are other running
ioctls.

accel/accel-blocker.c new file +19 -0
+             */
+            qemu_event_wait(&accel_in_ioctl_event);
+        } else {
+            /* No ioctl is running */
+            return;
+        }
+    }
+}
+
+void accel_ioctl_inhibit_end(void)
+{
+    CPUState *cpu;
+
+    qemu_lockcnt_unlock(&accel_in_ioctl_lock);
+    CPU_FOREACH(cpu) {
+        qemu_lockcnt_unlock(&cpu->in_ioctl_lock);
+    }
+}
+
accel/meson.build +1 -1
index b9a963cf80..a0d49c4f31 100644
@@ -1,4 +1,4 @@
-specific_ss.add(files('accel-common.c'))
+specific_ss.add(files('accel-common.c', 'accel-blocker.c'))
 softmmu_ss.add(files('accel-softmmu.c'))
 user_ss.add(files('accel-user.c'))
 
hw/core/cpu-common.c +2 -0
index f9fdd46b9d..8d6a4b1b65 100644
@@ -237,6 +237,7 @@ static void cpu_common_initfn(Object *obj)
     cpu->nr_threads = 1;
 
     qemu_mutex_init(&cpu->work_mutex);
+    qemu_lockcnt_init(&cpu->in_ioctl_lock);
     QSIMPLEQ_INIT(&cpu->work_list);
     QTAILQ_INIT(&cpu->breakpoints);
     QTAILQ_INIT(&cpu->watchpoints);
@@ -248,6 +249,7 @@ static void cpu_common_finalize(Object *obj)
 {
     CPUState *cpu = CPU(obj);
 
+    qemu_lockcnt_destroy(&cpu->in_ioctl_lock);
     qemu_mutex_destroy(&cpu->work_mutex);
 }
 
include/hw/core/cpu.h +3 -0
index f9b58773f7..15053663bc 100644
@@ -397,6 +397,9 @@ struct CPUState {
     uint32_t kvm_fetch_index;
     uint64_t dirty_pages;
 
+    /* Use by accel-block: CPU is executing an ioctl() */
+    QemuLockCnt in_ioctl_lock;
+
     /* Used for events with 'vcpu' and *without* the 'disabled'

properties */
DECLARE_BITMAP(trace_dstate_delayed,

CPU_TRACE_DSTATE_MAX_EVENTS);
     DECLARE_BITMAP(trace_dstate, CPU_TRACE_DSTATE_MAX_EVENTS);
include/sysemu/accel- renamed from include/sysemu/accel-blocker.h +0 -0

blocker.h
new file mode 100644
index 0000000000..72020529ef

include/sysemu/accel-blocker.h new file +2 -0
@@ -0,0 +1,56 @@
+/*
+ * Accelerator blocking API, to prevent new ioctls from starting and

wait the
+ * running ones finish.
+ * This mechanism differs from pause/resume_all_vcpus() in that it does not
+ * release the BQL.
+ *
+ * Copyright (c) 2022 Red Hat Inc.
+ *
+ * Author: Emanuele Giuseppe Esposito <[email protected]>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */

include/sysemu/accel-blocker.h new file +13 -0
+#ifndef ACCEL_BLOCKER_H
+#define ACCEL_BLOCKER_H
+
+#include "qemu/osdep.h"
+#include "sysemu/cpus.h"
+
+extern void accel_blocker_init(void);
+
+/*
+ * accel_{cpu_}ioctl_begin/end:
+ * Mark when ioctl is about to run or just finished.
+ *
+ * accel_{cpu_}ioctl_begin will block after
Quoted 4 lines

accel_ioctl_inhibit_begin() is
+ * called, preventing new ioctls to run. They will continue only after
+ * accel_ioctl_inibith_end().

Typo inibith --> inhibit

Quoted 27 lines

+ */

include/sysemu/accel-blocker.h new file +14 -0
+extern void accel_ioctl_begin(void);
+extern void accel_ioctl_end(void);
+extern void accel_cpu_ioctl_begin(CPUState *cpu);
+extern void accel_cpu_ioctl_end(CPUState *cpu);
+
+/*
+ * accel_ioctl_inhibit_begin: start critical section
+ *
+ * This function makes sure that:
+ * 1) incoming accel_{cpu_}ioctl_begin() calls block
+ * 2) wait that all ioctls that were already running reach
+ *    accel_{cpu_}ioctl_end(), kicking vcpus if necessary.
+ *
+ * This allows the caller to access shared data or perform

operations without
+ * worrying of concurrent vcpus accesses.
+ */

include/sysemu/accel-blocker.h new file +7 -0
+extern void accel_ioctl_inhibit_begin(void);
+
+/*
+ * accel_ioctl_inhibit_end: end critical section started by
+ * accel_ioctl_inhibit_begin()
+ *
+ * This function allows blocked accel_{cpu_}ioctl_begin() to

continue.
+ */

include/sysemu/accel-blocker.h line 55

Quoted 2 lines
include/sysemu/accel-blocker.h new file +2 -0
+extern void accel_ioctl_inhibit_end(void);
+

git am complains ".git/rebase-apply/patch:170: new blank line at EOF."

Quoted 1 line

+#endif /* ACCEL_BLOCKER_H */

#5 lore raw

PATCH v3 2/3 KVM: keep track of running ioctls

In reply to Emanuele Giuseppe Esposito

Using the new accel-blocker API, mark where ioctls are being called in KVM. Next, we will implement the critical section that will take care of performing memslots modifications atomically, therefore preventing any new ioctl from running and allowing the running ones to finish.

---
 accel/kvm/kvm-all.c | 7 +++++++
 1 file changed, 7 insertions(+)
accel/kvm/kvm-all.c +7 -0
index f99b0becd8..ff660fd469 100644
@@ -2310,6 +2310,7 @@ static int kvm_init(MachineState *ms)
     assert(TARGET_PAGE_SIZE <= qemu_real_host_page_size());
 
     s->sigmask_len = 8;
+    accel_blocker_init();
 
 #ifdef KVM_CAP_SET_GUEST_DEBUG
     QTAILQ_INIT(&s->kvm_sw_breakpoints);
@@ -3014,7 +3015,9 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
     va_end(ap);
 
     trace_kvm_vm_ioctl(type, arg);
+    accel_ioctl_begin();
     ret = ioctl(s->vmfd, type, arg);
+    accel_ioctl_end();
     if (ret == -1) {
         ret = -errno;
     }
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
     va_end(ap);
 
     trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);
     ret = ioctl(cpu->kvm_fd, type, arg);
+    accel_cpu_ioctl_end(cpu);
     if (ret == -1) {
         ret = -errno;
     }
@@ -3050,7 +3055,9 @@ int kvm_device_ioctl(int fd, int type, ...)
     va_end(ap);
 
     trace_kvm_device_ioctl(fd, type, arg);
+    accel_ioctl_begin();
     ret = ioctl(fd, type, arg);
+    accel_ioctl_end();
     if (ret == -1) {
         ret = -errno;
     }
Signature · 1 line
2.31.1
#6 lore raw

Re: [PATCH v3 2/3] KVM: keep track of running ioctls

Quoted 7 lines · Emanuele Giuseppe Esposito

Using the new accel-blocker API, mark where ioctls are being called in KVM. Next, we will implement the critical section that will take care of performing memslots modifications atomically, therefore preventing any new ioctl from running and allowing the running ones to finish.

You might want to drop that and instead mention something like "This patch is based on a protoype patch by David Hildenbrand".

Quoted 38 lines
---
  accel/kvm/kvm-all.c | 7 +++++++
  1 file changed, 7 insertions(+)
accel/kvm/kvm-all.c +5 -0
index f99b0becd8..ff660fd469 100644
@@ -2310,6 +2310,7 @@ static int kvm_init(MachineState *ms)
      assert(TARGET_PAGE_SIZE <= qemu_real_host_page_size());
 
      s->sigmask_len = 8;
+    accel_blocker_init();
 
  #ifdef KVM_CAP_SET_GUEST_DEBUG
      QTAILQ_INIT(&s->kvm_sw_breakpoints);
@@ -3014,7 +3015,9 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
      va_end(ap);
 
      trace_kvm_vm_ioctl(type, arg);
+    accel_ioctl_begin();
      ret = ioctl(s->vmfd, type, arg);
+    accel_ioctl_end();
      if (ret == -1) {
          ret = -errno;
      }
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
      va_end(ap);
 
      trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);
      ret = ioctl(cpu->kvm_fd, type, arg);
+    accel_cpu_ioctl_end(cpu);
      if (ret == -1) {
          ret = -errno;
      }

accel/kvm/kvm-all.c int kvm_device_ioctl(int fd, int type, ...) · line 3063

Quoted 9 lines
accel/kvm/kvm-all.c +2 -0
@@ -3050,7 +3055,9 @@ int kvm_device_ioctl(int fd, int type, ...)
      va_end(ap);
 
      trace_kvm_device_ioctl(fd, type, arg);
+    accel_ioctl_begin();
      ret = ioctl(fd, type, arg);
+    accel_ioctl_end();
      if (ret == -1) {
          ret = -errno;
      }

I recall that I had some additional patches that tried to catch some of more calls:

https://lore.kernel.org/qemu-devel/[email protected]/

https://lore.kernel.org/qemu-devel/[email protected]/

Do they still apply? Is there more?

Signature · 3 lines
Thanks,

David / dhildenb
#7 lore raw

Re: [PATCH v3 2/3] KVM: keep track of running ioctls

Am 17/11/2022 um 20:27 schrieb David Hildenbrand:

Quoted 58 lines · Emanuele Giuseppe Esposito
Quoted 7 lines

Using the new accel-blocker API, mark where ioctls are being called in KVM. Next, we will implement the critical section that will take care of performing memslots modifications atomically, therefore preventing any new ioctl from running and allowing the running ones to finish.

You might want to drop that and instead mention something like "This patch is based on a protoype patch by David Hildenbrand".

Quoted 34 lines

---
  accel/kvm/kvm-all.c | 7 +++++++

  1 file changed, 7 insertions(+)
accel/kvm/kvm-all.c +5 -0
index f99b0becd8..ff660fd469 100644
@@ -2310,6 +2310,7 @@ static int kvm_init(MachineState *ms)
       assert(TARGET_PAGE_SIZE <= qemu_real_host_page_size());
         s->sigmask_len = 8;
+    accel_blocker_init();
     #ifdef KVM_CAP_SET_GUEST_DEBUG
       QTAILQ_INIT(&s->kvm_sw_breakpoints);
@@ -3014,7 +3015,9 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
       va_end(ap);
         trace_kvm_vm_ioctl(type, arg);
+    accel_ioctl_begin();
       ret = ioctl(s->vmfd, type, arg);
+    accel_ioctl_end();
       if (ret == -1) {
           ret = -errno;
       }
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type, ...)
       va_end(ap);
         trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);
       ret = ioctl(cpu->kvm_fd, type, arg);
+    accel_cpu_ioctl_end(cpu);
       if (ret == -1) {
           ret = -errno;
       }

accel/kvm/kvm-all.c int kvm_device_ioctl(int fd, int type, ...) · line 3062

Quoted 8 lines
accel/kvm/kvm-all.c +2 -0
@@ -3050,7 +3055,9 @@ int kvm_device_ioctl(int fd, int type, ...)
       va_end(ap);
         trace_kvm_device_ioctl(fd, type, arg);
+    accel_ioctl_begin();
       ret = ioctl(fd, type, arg);
+    accel_ioctl_end();
       if (ret == -1) {
           ret = -errno;
       }

I recall that I had some additional patches that tried to catch some of more calls:

Quoted 6 lines

https://lore.kernel.org/qemu-devel/[email protected]/

https://lore.kernel.org/qemu-devel/[email protected]/

Do they still apply? Is there more?

Apologies, what do you mean with "do they still apply"? Looks fine to me

Emanuele

#8 lore raw

Re: [PATCH v3 2/3] KVM: keep track of running ioctls

In reply to Emanuele Giuseppe Esposito
Quoted 35 lines · Emanuele Giuseppe Esposito

Using the new accel-blocker API, mark where ioctls are being called in KVM. Next, we will implement the critical section that will take care of performing memslots modifications atomically, therefore preventing any new ioctl from running and allowing the running ones to finish.

---
 accel/kvm/kvm-all.c | 7 +++++++
 1 file changed, 7 insertions(+)
accel/kvm/kvm-all.c +3 -0
index f99b0becd8..ff660fd469 100644
@@ -2310,6 +2310,7 @@ static int kvm_init(MachineState *ms)
     assert(TARGET_PAGE_SIZE <= qemu_real_host_page_size());
 
     s->sigmask_len = 8;
+    accel_blocker_init();
 
 #ifdef KVM_CAP_SET_GUEST_DEBUG
     QTAILQ_INIT(&s->kvm_sw_breakpoints);
@@ -3014,7 +3015,9 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
     va_end(ap);
 
     trace_kvm_vm_ioctl(type, arg);
+    accel_ioctl_begin();
     ret = ioctl(s->vmfd, type, arg);
+    accel_ioctl_end();
     if (ret == -1) {
         ret = -errno;
     }

accel/kvm/kvm-all.c int kvm_vcpu_ioctl(CPUState *cpu, int type, · line 3039

Quoted 5 lines
accel/kvm/kvm-all.c +1 -0
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type,
 ...)
     va_end(ap);
 
     trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);

Does this mean that kvm_region_commit() can inhibit any other vcpus doing any ioctls?

Quoted 15 lines
accel/kvm/kvm-all.c +1 -0
     ret = ioctl(cpu->kvm_fd, type, arg);
+    accel_cpu_ioctl_end(cpu);
     if (ret == -1) {
         ret = -errno;
     }
accel/kvm/kvm-all.c +2 -0
@@ -3050,7 +3055,9 @@ int kvm_device_ioctl(int fd, int type, ...)
     va_end(ap);
 
     trace_kvm_device_ioctl(fd, type, arg);
+    accel_ioctl_begin();
     ret = ioctl(fd, type, arg);
+    accel_ioctl_end();
     if (ret == -1) {
         ret = -errno;
     }
#9 lore raw

Re: [PATCH v3 2/3] KVM: keep track of running ioctls

Am 02/12/2022 um 07:54 schrieb Robert Hoo:

Quoted 39 lines · Emanuele Giuseppe Esposito
Quoted 38 lines

Using the new accel-blocker API, mark where ioctls are being called in KVM. Next, we will implement the critical section that will take care of performing memslots modifications atomically, therefore preventing any new ioctl from running and allowing the running ones to finish.

---
 accel/kvm/kvm-all.c | 7 +++++++
 1 file changed, 7 insertions(+)
accel/kvm/kvm-all.c +3 -0
index f99b0becd8..ff660fd469 100644
@@ -2310,6 +2310,7 @@ static int kvm_init(MachineState *ms)
     assert(TARGET_PAGE_SIZE <= qemu_real_host_page_size());
 
     s->sigmask_len = 8;
+    accel_blocker_init();
 
 #ifdef KVM_CAP_SET_GUEST_DEBUG
     QTAILQ_INIT(&s->kvm_sw_breakpoints);
@@ -3014,7 +3015,9 @@ int kvm_vm_ioctl(KVMState *s, int type, ...)
     va_end(ap);
 
     trace_kvm_vm_ioctl(type, arg);
+    accel_ioctl_begin();
     ret = ioctl(s->vmfd, type, arg);
+    accel_ioctl_end();
     if (ret == -1) {
         ret = -errno;
     }
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type,
 ...)
     va_end(ap);
 
Quoted 5 lines

accel/kvm/kvm-all.c int kvm_vcpu_ioctl(CPUState *cpu, int type, ...) · line 3038

Quoted 2 lines
accel/kvm/kvm-all.c +1 -0
     trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);

Does this mean that kvm_region_commit() can inhibit any other vcpus doing any ioctls?

Yes, because we must prevent any vcpu from reading memslots while we are updating them.

Quoted 17 lines
Quoted 16 lines
accel/kvm/kvm-all.c +1 -0
     ret = ioctl(cpu->kvm_fd, type, arg);
+    accel_cpu_ioctl_end(cpu);
     if (ret == -1) {
         ret = -errno;
     }
accel/kvm/kvm-all.c +2 -0
@@ -3050,7 +3055,9 @@ int kvm_device_ioctl(int fd, int type, ...)
     va_end(ap);
 
     trace_kvm_device_ioctl(fd, type, arg);
+    accel_ioctl_begin();
     ret = ioctl(fd, type, arg);
+    accel_ioctl_end();
     if (ret == -1) {
         ret = -errno;
     }
#10 lore raw

Re: [PATCH v3 2/3] KVM: keep track of running ioctls

On Fri, 2022-12-02 at 13:03 +0100, Emanuele Giuseppe Esposito wrote:
...

Quoted 10 lines
Quoted 9 lines

accel/kvm/kvm-all.c int kvm_vcpu_ioctl(CPUState *cpu, int type, · line 3039

Quoted 6 lines
accel/kvm/kvm-all.c +1 -0
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type,
 ...)
     va_end(ap);
 
     trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);

Does this mean that kvm_region_commit() can inhibit any other vcpus doing any ioctls?

Quoted 4 lines

Yes, because we must prevent any vcpu from reading memslots while we are
updating them.

But do most other vm/vcpu ioctls contend with memslot operations?

#11 lore raw

Re: [PATCH v3 2/3] KVM: keep track of running ioctls

Am 02/12/2022 um 14:32 schrieb Robert Hoo:

Quoted 12 lines · Emanuele Giuseppe Esposito

...

Quoted 10 lines
Quoted 9 lines

accel/kvm/kvm-all.c int kvm_vcpu_ioctl(CPUState *cpu, int type, · line 3039

Quoted 6 lines
accel/kvm/kvm-all.c +1 -0
@@ -3032,7 +3035,9 @@ int kvm_vcpu_ioctl(CPUState *cpu, int type,
 ...)
     va_end(ap);
 
     trace_kvm_vcpu_ioctl(cpu->cpu_index, type, arg);
+    accel_cpu_ioctl_begin(cpu);

Does this mean that kvm_region_commit() can inhibit any other vcpus doing any ioctls?

Quoted 6 lines
Quoted 4 lines

Yes, because we must prevent any vcpu from reading memslots while we are
updating them.

But do most other vm/vcpu ioctls contend with memslot operations?

I think this is the simplest way. I agree not all ioctls contend with memslot operations, but there are also not so many memslot operations too. Instead of going one by one in all possible ioctls, covering all of them is the simplest way and it covers also the case of a new ioctl reading memslots that could be added in the future (alternatively we would be always updating the list of ioctls to block).

#12 lore raw

PATCH v3 3/3 kvm: Atomic memslot updates

In reply to Emanuele Giuseppe Esposito

From: David Hildenbrand <[email protected]>

If we update an existing memslot (e.g., resize, split), we temporarily remove the memslot to re-add it immediately afterwards. These updates are not atomic, especially not for KVM VCPU threads, such that we can get spurious faults.

Let's inhibit most KVM ioctls while performing relevant updates, such that we can perform the update just as if it would happen atomically without additional kernel support.

We capture the add/del changes and apply them in the notifier commit stage instead. There, we can check for overlaps and perform the ioctl inhibiting only if really required (-> overlap).

To keep things simple we don't perform additional checks that wouldn't actually result in an overlap -- such as !RAM memory regions in some cases (see kvm_set_phys_mem()).

To minimize cache-line bouncing, use a separate indicator (in_ioctl_lock) per CPU. Also, make sure to hold the kvm_slots_lock while performing both actions (removing+re-adding).

We have to wait until all IOCTLs were exited and block new ones from getting executed.

This approach cannot result in a deadlock as long as the inhibitor does not hold any locks that might hinder an IOCTL from getting finished and exited - something fairly unusual. The inhibitor will always hold the BQL.

AFAIKs, one possible candidate would be userfaultfd. If a page cannot be placed (e.g., during postcopy), because we're waiting for a lock, or if the userfaultfd thread cannot process a fault, because it is waiting for a lock, there could be a deadlock. However, the BQL is not applicable here, because any other guest memory access while holding the BQL would already result in a deadlock.

Nothing else in the kernel should block forever and wait for userspace intervention.

Note: pause_all_vcpus()/resume_all_vcpus() or start_exclusive()/end_exclusive() cannot be used, as they either drop the BQL or require to be called without the BQL - something inhibitors cannot handle. We need a low-level locking mechanism that is deadlock-free even when not releasing the BQL.

---
 accel/kvm/kvm-all.c      | 101 ++++++++++++++++++++++++++++++++++-----
 include/sysemu/kvm_int.h |   8 ++++
 2 files changed, 98 insertions(+), 11 deletions(-)
accel/kvm/kvm-all.c +90 -11
index ff660fd469..39ed30ab59 100644
@@ -31,6 +31,7 @@
 #include "sysemu/kvm_int.h"
 #include "sysemu/runstate.h"
 #include "sysemu/cpus.h"
+#include "sysemu/accel-blocker.h"
 #include "qemu/bswap.h"
 #include "exec/memory.h"
 #include "exec/ram_addr.h"
@@ -46,6 +47,7 @@
 #include "sysemu/hw_accel.h"
 #include "kvm-cpus.h"
 #include "sysemu/dirtylimit.h"
+#include "qemu/range.h"
 
 #include "hw/boards.h"
 #include "monitor/stats.h"
@@ -1292,6 +1294,7 @@ void kvm_set_max_memslot_size(hwaddr max_slot_size)
     kvm_max_slot_size = max_slot_size;
 }
 
+/* Called with KVMMemoryListener.slots_lock held */
 static void kvm_set_phys_mem(KVMMemoryListener *kml,
                              MemoryRegionSection *section, bool add)
 {
@@ -1326,14 +1329,12 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
     ram = memory_region_get_ram_ptr(mr) + mr_offset;
     ram_start_offset = memory_region_get_ram_addr(mr) + mr_offset;
 
-    kvm_slots_lock();
-
     if (!add) {
         do {
             slot_size = MIN(kvm_max_slot_size, size);
             mem = kvm_lookup_matching_slot(kml, start_addr, slot_size);
             if (!mem) {
-                goto out;
+                return;
             }
             if (mem->flags & KVM_MEM_LOG_DIRTY_PAGES) {
                 /*
@@ -1371,7 +1372,7 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
             start_addr += slot_size;
             size -= slot_size;
         } while (size);
-        goto out;
+        return;
     }
 
     /* register the new slot */
@@ -1396,9 +1397,6 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml,
         ram += slot_size;
         size -= slot_size;
     } while (size);
-
-out:
-    kvm_slots_unlock();
 }
 
 static void *kvm_dirty_ring_reaper_thread(void *data)
@@ -1455,18 +1453,95 @@ static void kvm_region_add(MemoryListener *listener,
                            MemoryRegionSection *section)
 {
     KVMMemoryListener *kml = container_of(listener, KVMMemoryListener, listener);
+    KVMMemoryUpdate *update;
+
+    update = g_new0(KVMMemoryUpdate, 1);
+    update->section = *section;
 
-    memory_region_ref(section->mr);
-    kvm_set_phys_mem(kml, section, true);
+    QSIMPLEQ_INSERT_TAIL(&kml->transaction_add, update, next);
 }
 
 static void kvm_region_del(MemoryListener *listener,
                            MemoryRegionSection *section)
 {
     KVMMemoryListener *kml = container_of(listener, KVMMemoryListener, listener);
+    KVMMemoryUpdate *update;
+
+    update = g_new0(KVMMemoryUpdate, 1);
+    update->section = *section;
+
+    QSIMPLEQ_INSERT_TAIL(&kml->transaction_del, update, next);
+}
+
+static void kvm_region_commit(MemoryListener *listener)
+{
+    KVMMemoryListener *kml = container_of(listener, KVMMemoryListener,
+                                          listener);
+    KVMMemoryUpdate *u1, *u2;
+    bool need_inhibit = false;
+
+    if (QSIMPLEQ_EMPTY(&kml->transaction_add) &&
+        QSIMPLEQ_EMPTY(&kml->transaction_del)) {
+        return;
+    }
+
+    /*
+     * We have to be careful when regions to add overlap with ranges to remove.
+     * We have to simulate atomic KVM memslot updates by making sure no ioctl()
+     * is currently active.
+     *
+     * The lists are order by addresses, so it's easy to find overlaps.
+     */
+    u1 = QSIMPLEQ_FIRST(&kml->transaction_del);
+    u2 = QSIMPLEQ_FIRST(&kml->transaction_add);
+    while (u1 && u2) {
+        Range r1, r2;
+
+        range_init_nofail(&r1, u1->section.offset_within_address_space,
+                          int128_get64(u1->section.size));
+        range_init_nofail(&r2, u2->section.offset_within_address_space,
+                          int128_get64(u2->section.size));
+
+        if (range_overlaps_range(&r1, &r2)) {
+            need_inhibit = true;
+            break;
+        }
+        if (range_lob(&r1) < range_lob(&r2)) {
+            u1 = QSIMPLEQ_NEXT(u1, next);
+        } else {
+            u2 = QSIMPLEQ_NEXT(u2, next);
+        }
+    }
+
+    kvm_slots_lock();
+    if (need_inhibit) {
+        accel_ioctl_inhibit_begin();
+    }
+
+    /* Remove all memslots before adding the new ones. */
+    while (!QSIMPLEQ_EMPTY(&kml->transaction_del)) {
+        u1 = QSIMPLEQ_FIRST(&kml->transaction_del);
+        QSIMPLEQ_REMOVE_HEAD(&kml->transaction_del, next);
 
-    kvm_set_phys_mem(kml, section, false);
-    memory_region_unref(section->mr);
+        kvm_set_phys_mem(kml, &u1->section, false);
+        memory_region_unref(u1->section.mr);
+
+        g_free(u1);
+    }
+    while (!QSIMPLEQ_EMPTY(&kml->transaction_add)) {
+        u1 = QSIMPLEQ_FIRST(&kml->transaction_add);
+        QSIMPLEQ_REMOVE_HEAD(&kml->transaction_add, next);
+
+        memory_region_ref(u1->section.mr);
+        kvm_set_phys_mem(kml, &u1->section, true);
+
+        g_free(u1);
+    }
+
+    if (need_inhibit) {
+        accel_ioctl_inhibit_end();
+    }
+    kvm_slots_unlock();
 }
 
 static void kvm_log_sync(MemoryListener *listener,
@@ -1610,8 +1685,12 @@ void kvm_memory_listener_register(KVMState *s, KVMMemoryListener *kml,
         kml->slots[i].slot = i;
     }
 
+    QSIMPLEQ_INIT(&kml->transaction_add);
+    QSIMPLEQ_INIT(&kml->transaction_del);
+
     kml->listener.region_add = kvm_region_add;
     kml->listener.region_del = kvm_region_del;
+    kml->listener.commit = kvm_region_commit;
     kml->listener.log_start = kvm_log_start;
     kml->listener.log_stop = kvm_log_stop;
     kml->listener.priority = 10;
include/sysemu/kvm_int.h +8 -0
index 3b4adcdc10..60b520a13e 100644
@@ -12,6 +12,7 @@
 #include "exec/memory.h"
 #include "qapi/qapi-types-common.h"
 #include "qemu/accel.h"
+#include "qemu/queue.h"
 #include "sysemu/kvm.h"
 
 typedef struct KVMSlot
@@ -31,10 +32,17 @@ typedef struct KVMSlot
     ram_addr_t ram_start_offset;
 } KVMSlot;
 
+typedef struct KVMMemoryUpdate {
+    QSIMPLEQ_ENTRY(KVMMemoryUpdate) next;
+    MemoryRegionSection section;
+} KVMMemoryUpdate;
+
 typedef struct KVMMemoryListener {
     MemoryListener listener;
     KVMSlot *slots;
     int as_id;
+    QSIMPLEQ_HEAD(, KVMMemoryUpdate) transaction_add;
+    QSIMPLEQ_HEAD(, KVMMemoryUpdate) transaction_del;
 } KVMMemoryListener;
 
 #define KVM_MSI_HASHTAB_SIZE    256
Signature · 1 line
2.31.1