Skip to contentSkip to conversation

tc and iptables trouble

LARTC Lluís Gili 3 participants 6 messages Nov 24, 2004 – Nov 27, 2004

lore
Share & tools
lore
#0 lore raw

Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:

tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument

if I don't put the "perturb 10" option, it works.

another question is about iptables, when I indicate the " --set-mark" option:

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument

which will be the problem?
I'm using Debian testing, with kernel 2.6.9 compiled with netfilter patches, iptables 1.2.11, iproute2 2.6.9-1, and I have these modules loaded:

Module                  Size  Used by
ebt_mark_m              1096  -
ebt_mark                1096  -
ebtables               17768  -
ipt_mark                1128  -
sch_wrr                11176  -
sch_teql                4168  -
sch_dsmark              5224  -
cls_route               4936  -
ipt_tcpmss              1640  -
cls_tcindex             5256  -
cls_u32                 5772  -
sch_ingress             2604  -
ipt_TCPMSS              3208  -
iptable_filter          1864  -
ipt_MARK                1512  -
cls_fw                  3208  -
iptable_mangle          1832  -
ppp_async               7816  -
crc_ccitt               1512  -
ip_gre                  8672  -
sch_esfq                4936  -
sch_netem               4808  -
ipt_connlimit           2248  -
ipt_connmark            1160  -
sch_gred                5704  -
sch_red                 3368  -
sch_hfsc               16360  -
sch_cbq                13864  -
sch_prio                3528  -
sch_tbf                 4168  -
iptable_nat            20264  -
ip_conntrack           37076  -
ip_tables              13440  -
ppp_mppe_mppc          13384  -
ppp_generic            17788  -
slhc                    6312  -
sch_sfq                 4168  -
sch_htb                20488  -
rtc                     8640  -
8139too                16936  -
mii                     3464  -
crc32                   3688  -

Thank you for your time, and sorry my BAD english !!!

#1 lore raw
Quoted 8 lines · Lluís Gili

Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:

tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument

if I don't put the "perturb 10" option, it works.

perturb 10 it's used by default!!!
nice parent class 5:1323 :o

Quoted 5 lines

another question is about iptables, when I indicate the " --set-mark" option:

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument

When you "--set-mark 1323", iptables try to transform it in HEX... give it a lower value, like 132! 1323 in HEX = 52B and I think that it doesn't know how to use 52B as a mark...

Quoted 50 lines

which will be the problem?
I'm using Debian testing, with kernel 2.6.9 compiled with netfilter patches, iptables 1.2.11, iproute2 2.6.9-1, and I have these modules loaded:

Module                  Size  Used by
ebt_mark_m              1096  -
ebt_mark                1096  -
ebtables               17768  -
ipt_mark                1128  -
sch_wrr                11176  -
sch_teql                4168  -
sch_dsmark              5224  -
cls_route               4936  -
ipt_tcpmss              1640  -
cls_tcindex             5256  -
cls_u32                 5772  -
sch_ingress             2604  -
ipt_TCPMSS              3208  -
iptable_filter          1864  -
ipt_MARK                1512  -
cls_fw                  3208  -
iptable_mangle          1832  -
ppp_async               7816  -
crc_ccitt               1512  -
ip_gre                  8672  -
sch_esfq                4936  -
sch_netem               4808  -
ipt_connlimit           2248  -
ipt_connmark            1160  -
sch_gred                5704  -
sch_red                 3368  -
sch_hfsc               16360  -
sch_cbq                13864  -
sch_prio                3528  -
sch_tbf                 4168  -
iptable_nat            20264  -
ip_conntrack           37076  -
ip_tables              13440  -
ppp_mppe_mppc          13384  -
ppp_generic            17788  -
slhc                    6312  -
sch_sfq                 4168  -
sch_htb                20488  -
rtc                     8640  -
8139too                16936  -
mii                     3464  -
crc32                   3688  -

Thank you for your time, and sorry my BAD english !!!

Signature · 6 lines
Claudiu Gafton <[email protected]>
Alvatec Data SRL

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#2 lore raw
In reply to Lluís Gili
Quoted 16 lines · Claudiu Gafton
Quoted 8 lines · Lluís Gili

Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:

tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument

if I don't put the "perturb 10" option, it works.

perturb 10 it's used by default!!!
nice parent class 5:1323 :o

Quoted 3 lines

another question is about iptables, when I indicate the " --set-mark" option:

Quoted 6 lines
Quoted 2 lines

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument

When you "--set-mark 1323", iptables try to transform it in HEX... give it a lower value, like 132! 1323 in HEX = 52B and I think that it doesn't know how to use 52B as a mark...

Oh.... sorry, it works ! I put in PREROUTING a MARK 1323 and it was transformed OK into 0x52b !
I think that the problem it's the egress append! Please be more specific!

Quoted 51 lines
Quoted 51 lines

which will be the problem?
I'm using Debian testing, with kernel 2.6.9 compiled with netfilter patches, iptables 1.2.11, iproute2 2.6.9-1, and I have these modules loaded:

Module                  Size  Used by
ebt_mark_m              1096  -
ebt_mark                1096  -
ebtables               17768  -
ipt_mark                1128  -
sch_wrr                11176  -
sch_teql                4168  -
sch_dsmark              5224  -
cls_route               4936  -
ipt_tcpmss              1640  -
cls_tcindex             5256  -
cls_u32                 5772  -
sch_ingress             2604  -
ipt_TCPMSS              3208  -
iptable_filter          1864  -
ipt_MARK                1512  -
cls_fw                  3208  -
iptable_mangle          1832  -
ppp_async               7816  -
crc_ccitt               1512  -
ip_gre                  8672  -
sch_esfq                4936  -
sch_netem               4808  -
ipt_connlimit           2248  -
ipt_connmark            1160  -
sch_gred                5704  -
sch_red                 3368  -
sch_hfsc               16360  -
sch_cbq                13864  -
sch_prio                3528  -
sch_tbf                 4168  -
iptable_nat            20264  -
ip_conntrack           37076  -
ip_tables              13440  -
ppp_mppe_mppc          13384  -
ppp_generic            17788  -
slhc                    6312  -
sch_sfq                 4168  -
sch_htb                20488  -
rtc                     8640  -
8139too                16936  -
mii                     3464  -
crc32                   3688  -

Thank you for your time, and sorry my BAD english !!!

Signature · 6 lines
Claudiu Gafton <[email protected]>
Alvatec Data SRL

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#3 lore raw
In reply to Lluís Gili
Quoted 6 lines · Lluís Gili

Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:

tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument

Quoted 7 lines

if I don't put the "perturb 10" option, it works.

another question is about iptables, when I indicate the " --set-mark" option:

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument

Egress is a Chain, in this case a user defined chain. It doesn´t stand for the egress used with qdiscs. If you didn´t use a command like this iptables -N egress, there isn´t a chain like egress.

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#4 lore raw
In reply to Lluís Gili
Quoted 3 lines
Quoted 2 lines · Lluís Gili

Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb

10" option to tc, i gives me this error:

Quoted 9 lines
Quoted 5 lines

tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument

if I don't put the "perturb 10" option, it works.

perturb 10 it's used by default!!!
nice parent class 5:1323 :o

I think that "perturb 0" is used by default (see
http://lartc.org/howto/lartc.qdisc.classless.html#LARTC.SFQ)
anyway, I put any other valor and it don't works :(

Quoted 2 lines
Quoted 2 lines

another question is about iptables, when I indicate the " --set-mark"

option:

Quoted 9 lines
Quoted 4 lines

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument

Egress is a Chain, in this case a user defined chain. It doesn´t stand for the egress used with qdiscs. If you didn´t use a command like this iptables -N egress, there isn´t a chain like egress.

Quoted 7 lines
Quoted 3 lines

When you "--set-mark 1323", iptables try to transform it in HEX... give it a lower value, like 132! 1323 in HEX = 52B and I think that it doesn't know how to use 52B as a mark...

Oh.... sorry, it works ! I put in PREROUTING a MARK 1323 and it was transformed OK into 0x52b !
I think that the problem it's the egress append! Please be more specific!

I have this Chain created, I think it is not the problem. I see this message in syslog:

Nov 25 09:49:04 epia -- MARK --
Nov 25 10:00:05 epia kernel: MARK: targinfosize 4 != 8

I'm installing QOS in a embeded Debian on a Compact Flash, using the
http://gate-bunker.p6.msu.ru/~berk/router.html script. I had to patch and compile kernel 2.6.9, iptables and iproute in another PC and I used debmake and debuild for build .deb packets, using the "Multi-binary" option in "deb-make". Debuild created the .deb files and I can install it tho the embeded... When I do "dpkg -l" the iproute2 and iptables packets appear like this:

ii  iproute2                  2.6.9-1                   Missing
ii  iptables                  1.2.11-1                  Missing

Here is all I do:

route add -net 10.0.0.0 netmask 255.255.255.0 gw 172.16.0.1 iptables -t nat -A POSTROUTING -o eth0 -s 10.0.0.0/8 -j SNAT --to 172.16.0.45

tc qdisc add dev eth1 root handle 5: htb default 20
tc class add dev eth1 parent 5: classid 5:1 htb rate 1300kbit burst 15k iptables -t mangle -N ingress
iptables -t mangle -A POSTROUTING -o eth1 -j ingress

tc qdisc add dev eth0 root handle 5: htb default 20
tc class add dev eth0 parent 5: classid 5:1 htb rate 500kbit burst 15k iptables -t mangle -N egress
iptables -t mangle -A POSTROUTING -o eth0 -j egress

tc class add dev eth0 parent 5:1 classid 5:1323 htb rate 128kbit ceil 128kbit burst 6k prio 5
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth0 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323

tc class add dev eth1 parent 5:1 classid 5:1323 htb rate 256kbit ceil 256kbit burst 6k prio 5
tc qdisc add dev eth1 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth1 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323 #FAILS! iptables -t mangle -A ingress -d 10.0.0.124 -j MARK --set-mark 1323 #FAILS!

Quoted 4 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

author
#5 lore raw
In reply to Lluís Gili

el Dijous 25 Novembre 2004 12:27, Lluís Gili va escriure:

Quoted 9 lines
Quoted 3 lines
Quoted 2 lines · Lluís Gili

Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb

10" option to tc, i gives me this error:

Quoted 4 lines
Quoted 4 lines

tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument

if I don't put the "perturb 10" option, it works.

It still doesn't works

Quoted 6 lines
Quoted 1 line
Quoted 1 line

another question is about iptables, when I indicate the " --set-mark"

option:

Quoted 3 lines
Quoted 2 lines

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument

I reapplied the patches of iptables and recompiled it and now it works (I didn't applied the patches correctly :P )

Quoted 53 lines

I see this message in syslog:

Nov 25 09:49:04 epia -- MARK --
Nov 25 10:00:05 epia kernel: MARK: targinfosize 4 != 8

I'm installing QOS in a embeded Debian on a Compact Flash, using the
http://gate-bunker.p6.msu.ru/~berk/router.html script. I had to patch and compile kernel 2.6.9, iptables and iproute in another PC and I used debmake and debuild for build .deb packets, using the "Multi-binary" option in "deb-make". Debuild created the .deb files and I can install it tho the embeded... When I do "dpkg -l" the iproute2 and iptables packets appear like this:

ii  iproute2                  2.6.9-1                   Missing
ii  iptables                  1.2.11-1                  Missing

Here is all I do:

route add -net 10.0.0.0 netmask 255.255.255.0 gw 172.16.0.1 iptables -t nat -A POSTROUTING -o eth0 -s 10.0.0.0/8 -j SNAT --to 172.16.0.45

tc qdisc add dev eth1 root handle 5: htb default 20
tc class add dev eth1 parent 5: classid 5:1 htb rate 1300kbit burst 15k iptables -t mangle -N ingress
iptables -t mangle -A POSTROUTING -o eth1 -j ingress

tc qdisc add dev eth0 root handle 5: htb default 20
tc class add dev eth0 parent 5: classid 5:1 htb rate 500kbit burst 15k iptables -t mangle -N egress
iptables -t mangle -A POSTROUTING -o eth0 -j egress

tc class add dev eth0 parent 5:1 classid 5:1323 htb rate 128kbit ceil 128kbit burst 6k prio 5
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth0 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323

tc class add dev eth1 parent 5:1 classid 5:1323 htb rate 256kbit ceil 256kbit burst 6k prio 5
tc qdisc add dev eth1 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth1 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323

iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323 #FAILS! iptables -t mangle -A ingress -d 10.0.0.124 -j MARK --set-mark 1323 #FAILS!

Quoted 3 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Signature · 6 lines
ID 0x834D5708
wget http://www.awacat.com/clausGPG/publica_tictac.asc

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/