tc and iptables trouble
Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument
if I don't put the "perturb 10" option, it works.
another question is about iptables, when I indicate the " --set-mark" option:
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument
which will be the problem?
I'm using Debian testing, with kernel 2.6.9 compiled with netfilter patches, iptables 1.2.11, iproute2 2.6.9-1, and I have these modules loaded:
Module Size Used by ebt_mark_m 1096 - ebt_mark 1096 - ebtables 17768 - ipt_mark 1128 - sch_wrr 11176 - sch_teql 4168 - sch_dsmark 5224 - cls_route 4936 - ipt_tcpmss 1640 - cls_tcindex 5256 - cls_u32 5772 - sch_ingress 2604 - ipt_TCPMSS 3208 - iptable_filter 1864 - ipt_MARK 1512 - cls_fw 3208 - iptable_mangle 1832 - ppp_async 7816 - crc_ccitt 1512 - ip_gre 8672 - sch_esfq 4936 - sch_netem 4808 - ipt_connlimit 2248 - ipt_connmark 1160 - sch_gred 5704 - sch_red 3368 - sch_hfsc 16360 - sch_cbq 13864 - sch_prio 3528 - sch_tbf 4168 - iptable_nat 20264 - ip_conntrack 37076 - ip_tables 13440 - ppp_mppe_mppc 13384 - ppp_generic 17788 - slhc 6312 - sch_sfq 4168 - sch_htb 20488 - rtc 8640 - 8139too 16936 - mii 3464 - crc32 3688 -
Thank you for your time, and sorry my BAD english !!!
Quoted 8 lines · LluÃs Gili
Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument
if I don't put the "perturb 10" option, it works.
perturb 10 it's used by default!!!
nice parent class 5:1323 :o
Quoted 5 lines
another question is about iptables, when I indicate the " --set-mark" option:
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument
When you "--set-mark 1323", iptables try to transform it in HEX... give it a lower value, like 132! 1323 in HEX = 52B and I think that it doesn't know how to use 52B as a mark...
Quoted 50 lines
which will be the problem?
I'm using Debian testing, with kernel 2.6.9 compiled with netfilter patches, iptables 1.2.11, iproute2 2.6.9-1, and I have these modules loaded:Module Size Used by ebt_mark_m 1096 - ebt_mark 1096 - ebtables 17768 - ipt_mark 1128 - sch_wrr 11176 - sch_teql 4168 - sch_dsmark 5224 - cls_route 4936 - ipt_tcpmss 1640 - cls_tcindex 5256 - cls_u32 5772 - sch_ingress 2604 - ipt_TCPMSS 3208 - iptable_filter 1864 - ipt_MARK 1512 - cls_fw 3208 - iptable_mangle 1832 - ppp_async 7816 - crc_ccitt 1512 - ip_gre 8672 - sch_esfq 4936 - sch_netem 4808 - ipt_connlimit 2248 - ipt_connmark 1160 - sch_gred 5704 - sch_red 3368 - sch_hfsc 16360 - sch_cbq 13864 - sch_prio 3528 - sch_tbf 4168 - iptable_nat 20264 - ip_conntrack 37076 - ip_tables 13440 - ppp_mppe_mppc 13384 - ppp_generic 17788 - slhc 6312 - sch_sfq 4168 - sch_htb 20488 - rtc 8640 - 8139too 16936 - mii 3464 - crc32 3688 -Thank you for your time, and sorry my BAD english !!!
Signature · 6 lines
Claudiu Gafton <[email protected]> Alvatec Data SRL _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 16 lines · Claudiu Gafton
Quoted 8 lines · LluÃs Gili
Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument
if I don't put the "perturb 10" option, it works.
perturb 10 it's used by default!!!
nice parent class 5:1323 :oQuoted 3 lines
another question is about iptables, when I indicate the " --set-mark" option:
Quoted 6 lines
Quoted 2 lines
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argumentWhen you "--set-mark 1323", iptables try to transform it in HEX... give it a lower value, like 132! 1323 in HEX = 52B and I think that it doesn't know how to use 52B as a mark...
Oh.... sorry, it works ! I put in PREROUTING a MARK 1323 and it was transformed OK into 0x52b !
I think that the problem it's the egress append! Please be more specific!
Quoted 51 lines
Quoted 51 lines
which will be the problem?
I'm using Debian testing, with kernel 2.6.9 compiled with netfilter patches, iptables 1.2.11, iproute2 2.6.9-1, and I have these modules loaded:Module Size Used by ebt_mark_m 1096 - ebt_mark 1096 - ebtables 17768 - ipt_mark 1128 - sch_wrr 11176 - sch_teql 4168 - sch_dsmark 5224 - cls_route 4936 - ipt_tcpmss 1640 - cls_tcindex 5256 - cls_u32 5772 - sch_ingress 2604 - ipt_TCPMSS 3208 - iptable_filter 1864 - ipt_MARK 1512 - cls_fw 3208 - iptable_mangle 1832 - ppp_async 7816 - crc_ccitt 1512 - ip_gre 8672 - sch_esfq 4936 - sch_netem 4808 - ipt_connlimit 2248 - ipt_connmark 1160 - sch_gred 5704 - sch_red 3368 - sch_hfsc 16360 - sch_cbq 13864 - sch_prio 3528 - sch_tbf 4168 - iptable_nat 20264 - ip_conntrack 37076 - ip_tables 13440 - ppp_mppe_mppc 13384 - ppp_generic 17788 - slhc 6312 - sch_sfq 4168 - sch_htb 20488 - rtc 8640 - 8139too 16936 - mii 3464 - crc32 3688 -Thank you for your time, and sorry my BAD english !!!
Signature · 6 lines
Claudiu Gafton <[email protected]> Alvatec Data SRL _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 6 lines · Lluís Gili
Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb 10" option to tc, i gives me this error:tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument
Quoted 7 lines
if I don't put the "perturb 10" option, it works.
another question is about iptables, when I indicate the " --set-mark" option:
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument
Egress is a Chain, in this case a user defined chain. It doesn´t stand for the egress used with qdiscs. If you didn´t use a command like this iptables -N egress, there isn´t a chain like egress.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 3 lines
Quoted 2 lines · Lluís Gili
Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb
10" option to tc, i gives me this error:
Quoted 9 lines
Quoted 5 lines
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument
if I don't put the "perturb 10" option, it works.
perturb 10 it's used by default!!!
nice parent class 5:1323 :o
I think that "perturb 0" is used by default (see
http://lartc.org/howto/lartc.qdisc.classless.html#LARTC.SFQ)
anyway, I put any other valor and it don't works :(
Quoted 2 lines
Quoted 2 lines
another question is about iptables, when I indicate the " --set-mark"
option:
Quoted 9 lines
Quoted 4 lines
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argumentEgress is a Chain, in this case a user defined chain. It doesn´t stand for the egress used with qdiscs. If you didn´t use a command like this iptables -N egress, there isn´t a chain like egress.
Quoted 7 lines
Quoted 3 lines
When you "--set-mark 1323", iptables try to transform it in HEX... give it a lower value, like 132! 1323 in HEX = 52B and I think that it doesn't know how to use 52B as a mark...
Oh.... sorry, it works ! I put in PREROUTING a MARK 1323 and it was transformed OK into
0x52b!
I think that the problem it's the egress append! Please be more specific!
I have this Chain created, I think it is not the problem. I see this message in syslog:
Nov 25 09:49:04 epia -- MARK -- Nov 25 10:00:05 epia kernel: MARK: targinfosize 4 != 8
I'm installing QOS in a embeded Debian on a Compact Flash, using the
http://gate-bunker.p6.msu.ru/~berk/router.html script. I had to patch and compile kernel 2.6.9, iptables and iproute in another PC and I used debmake and debuild for build .deb packets, using the "Multi-binary" option in "deb-make". Debuild created the .deb files and I can install it tho the embeded... When I do "dpkg -l" the iproute2 and iptables packets appear like this:
ii iproute2 2.6.9-1 Missing ii iptables 1.2.11-1 Missing
Here is all I do:
route add -net 10.0.0.0 netmask 255.255.255.0 gw 172.16.0.1 iptables -t nat -A POSTROUTING -o eth0 -s 10.0.0.0/8 -j SNAT --to 172.16.0.45
tc qdisc add dev eth1 root handle 5: htb default 20
tc class add dev eth1 parent 5: classid 5:1 htb rate 1300kbit burst 15k iptables -t mangle -N ingress
iptables -t mangle -A POSTROUTING -o eth1 -j ingress
tc qdisc add dev eth0 root handle 5: htb default 20
tc class add dev eth0 parent 5: classid 5:1 htb rate 500kbit burst 15k iptables -t mangle -N egress
iptables -t mangle -A POSTROUTING -o eth0 -j egress
tc class add dev eth0 parent 5:1 classid 5:1323 htb rate 128kbit ceil 128kbit burst 6k prio 5
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth0 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323
tc class add dev eth1 parent 5:1 classid 5:1323 htb rate 256kbit ceil 256kbit burst 6k prio 5
tc qdisc add dev eth1 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth1 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323 #FAILS! iptables -t mangle -A ingress -d 10.0.0.124 -j MARK --set-mark 1323 #FAILS!
Quoted 4 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
el Dijous 25 Novembre 2004 12:27, Lluís Gili va escriure:
Quoted 9 lines
Quoted 3 lines
Quoted 2 lines · Lluís Gili
Hi all
I have a trouble configuring the qdiscs, when I indicate the "perturb10" option to tc, i gives me this error:
Quoted 4 lines
Quoted 4 lines
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 RTNETLINK answers: Invalid argument
if I don't put the "perturb 10" option, it works.
It still doesn't works
Quoted 6 lines
Quoted 1 line
Quoted 1 line
another question is about iptables, when I indicate the " --set-mark"
option:
Quoted 3 lines
Quoted 2 lines
iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323
iptables: Invalid argument
I reapplied the patches of iptables and recompiled it and now it works (I didn't applied the patches correctly :P )
Quoted 53 lines
I see this message in syslog:
Nov 25 09:49:04 epia -- MARK -- Nov 25 10:00:05 epia kernel: MARK: targinfosize 4 != 8I'm installing QOS in a embeded Debian on a Compact Flash, using the
http://gate-bunker.p6.msu.ru/~berk/router.html script. I had to patch and compile kernel 2.6.9, iptables and iproute in another PC and I used debmake and debuild for build .deb packets, using the "Multi-binary" option in "deb-make". Debuild created the .deb files and I can install it tho the embeded... When I do "dpkg -l" the iproute2 and iptables packets appear like this:ii iproute2 2.6.9-1 Missing ii iptables 1.2.11-1 MissingHere is all I do:
route add -net 10.0.0.0 netmask 255.255.255.0 gw 172.16.0.1 iptables -t nat -A POSTROUTING -o eth0 -s 10.0.0.0/8 -j SNAT --to 172.16.0.45
tc qdisc add dev eth1 root handle 5: htb default 20
tc class add dev eth1 parent 5: classid 5:1 htb rate 1300kbit burst 15k iptables -t mangle -N ingress
iptables -t mangle -A POSTROUTING -o eth1 -j ingresstc qdisc add dev eth0 root handle 5: htb default 20
tc class add dev eth0 parent 5: classid 5:1 htb rate 500kbit burst 15k iptables -t mangle -N egress
iptables -t mangle -A POSTROUTING -o eth0 -j egresstc class add dev eth0 parent 5:1 classid 5:1323 htb rate 128kbit ceil 128kbit burst 6k prio 5
tc qdisc add dev eth0 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth0 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323tc class add dev eth1 parent 5:1 classid 5:1323 htb rate 256kbit ceil 256kbit burst 6k prio 5
tc qdisc add dev eth1 parent 5:1323 handle 1323 sfq perturb 10 #FAILS! tc filter add dev eth1 parent 5: protocol ip handle 1323 pref 1323 fw classid 5:1323iptables -t mangle -A egress -s 10.0.0.124 -j MARK --set-mark 1323 #FAILS! iptables -t mangle -A ingress -d 10.0.0.124 -j MARK --set-mark 1323 #FAILS!
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Signature · 6 lines
ID 0x834D5708 wget http://www.awacat.com/clausGPG/publica_tictac.asc _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/