Leadtek WinFast DTV Dongle Gold Remote y04g0051 issues
Hi,
I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and the y04g0051 remote, after a lot of reading I now have the remote partially working as only half of the keys are sending codes to "irw"
I read this thread and noticed that the exact keys which work are the ones listed with reported codes.
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html
The keys not mentioned in that thread are the ones not working, so I guess the extra codes need to be reported to someone to be added into a new build?
Can I help in providing these codes and some testing.
Thank you.
_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Quoted 13 lines · PC Mus
I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and the y04g0051 remote, after a lot of reading I now have the remote partially working as only half of the keys are sending codes to "irw"
I read this thread and noticed that the exact keys which work are the ones listed with reported codes.
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html
Quoted 6 lines
The keys not mentioned in that thread are the ones not working, so I guess the extra codes need to be reported to someone to be added into a new build?
Can I help in providing these codes and some testing.
You could send missing button codes to me and I will add those to the driver. There is debug switch which shows remote events, it is debug=2.
remove driver from memory
# rmmod dvb-usb-af9015
# load driver with needed debug modprobe dvb-usb-af9015 debug=2
# look codes from log tail -f /var/log/messages
I am not sure if debugs are enabled with your system build, but if not you will need to install and compile current v4l-dvb master.
Antti
Signature · 1 line
http://palosaari.fi/