Skip to contentSkip to conversation

Leadtek WinFast DTV Dongle Gold Remote y04g0051 issues

linux-dvb Matthew Skinner, PC Mus 2 participants 2 messages Sep 11, 2009 – Sep 12, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Hi,

I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and the y04g0051 remote, after a lot of reading I now have the remote partially working as only half of the keys are sending codes to "irw"

I read this thread and noticed that the exact keys which work are the ones listed with reported codes.

http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html

The keys not mentioned in that thread are the ones not working, so I guess the extra codes need to be reported to someone to be added into a new build?

Can I help in providing these codes and some testing.

Thank you.

_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead [email protected] [email protected]
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

#1 lore raw
Quoted 13 lines · PC Mus

I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and the y04g0051 remote, after a lot of reading I now have the remote partially working as only half of the keys are sending codes to "irw"

I read this thread and noticed that the exact keys which work are the ones listed with reported codes.

http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html

Quoted 6 lines

The keys not mentioned in that thread are the ones not working, so I guess the extra codes need to be reported to someone to be added into a new build?

Can I help in providing these codes and some testing.

You could send missing button codes to me and I will add those to the driver. There is debug switch which shows remote events, it is debug=2.

remove driver from memory

# rmmod dvb-usb-af9015
# load driver with needed debug
modprobe dvb-usb-af9015 debug=2
# look codes from log
tail -f /var/log/messages

I am not sure if debugs are enabled with your system build, but if not you will need to install and compile current v4l-dvb master.

Antti

Signature · 1 line
http://palosaari.fi/