backlight: lms283gf05: use GPIOF_INIT flags when using devm_gpio_request_one()

GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below:
GPIOF_DIR_OUT (0 << 0)
GPIOF_DIR_IN (1 << 0)
So, when !pdata->reset_inverted is 1, the gpio pin can be set as input, instead of output.

To provent this problem, GPIOF_INIT flag should be used when using devm_gpio_request_one().

---
 drivers/video/backlight/lms283gf05.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

index d317730..3dc4995 100644
@@ -159,7 +159,8 @@ static int __devinit lms283gf05_probe(struct spi_device *spi)
 
 	if (pdata != NULL) {
 		ret = devm_gpio_request_one(&spi->dev, pdata->reset_gpio,
-				GPIOF_DIR_OUT | !pdata->reset_inverted,
+				GPIOF_DIR_OUT | (!pdata->reset_inverted ?
+				GPIOF_INIT_HIGH : GPIOF_INIT_LOW),
 				"LMS285GF05 RESET");
 		if (ret)
 			return ret;

1.7.2.5