ath11k: fix rmmod failure if qmi sequence fails
PATCH v2 1/1 ath11k: fix rmmod failure if qmi sequence fails
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working.
Logs:
Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper
qmi failed to load CAL: IPQ8074/caldata.bin
qmi failed to load board data file:-11
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
---
V2:
- Rebased on latest tree
drivers/net/wireless/ath/ath11k/ahb.c | 9 +++++++- drivers/net/wireless/ath/ath11k/core.h | 1 + drivers/net/wireless/ath/ath11k/debugfs.c | 1 + drivers/net/wireless/ath/ath11k/pci.c | 8 +++++++ drivers/net/wireless/ath/ath11k/qmi.c | 37 ++++++++++++++++++++----------- 5 files changed, 42 insertions(+), 14 deletions(-)
drivers/net/wireless/ath/ath11k/ahb.c +8 -1
@@ -747,6 +747,13 @@ static int ath11k_ahb_remove(struct platform_device *pdev)struct ath11k_base *ab =platform_get_drvdata (pdev);unsigned long left; +if (test_bit (ATH11K_FLAG_QMI_FAIL , &ab->dev_flags)) { +ath11k_ahb_power_down (ab); +ath11k_debugfs_soc_destroy (ab); +ath11k_qmi_deinit_service (ab); + goto qmi_fail; + } +reinit_completion (&ab->driver_recovery);if (test_bit (ATH11K_FLAG_RECOVERY , &ab->dev_flags)) {
@@ -760,8 +767,8 @@ static int ath11k_ahb_remove(struct platform_device *pdev)cancel_work_sync (&ab->restart_work);ath11k_core_deinit (ab); +qmi_fail:ath11k_ahb_free_irq (ab); -ath11k_hal_srng_deinit (ab);ath11k_ce_free_pipes (ab);ath11k_core_free (ab);
drivers/net/wireless/ath/ath11k/core.h +1 -0
@@ -183,6 +183,7 @@ enum ath11k_dev_flags {ATH11K_FLAG_RECOVERY ,ATH11K_FLAG_UNREGISTERING ,ATH11K_FLAG_REGISTERED , + ATH11K_FLAG_QMI_FAIL, }; enum ath11k_monitor_flags {
drivers/net/wireless/ath/ath11k/debugfs.c +1 -0
@@ -867,6 +867,7 @@ void ath11k_debugfs_soc_destroy(struct ath11k_base *ab)debugfs_remove_recursive (ab->debugfs_ath11k); ab->debugfs_ath11k =NULL ; } +EXPORT_SYMBOL (ath11k_debugfs_soc_destroy);void ath11k_debugfs_fw_stats_init (struct ath11k *ar) {
drivers/net/wireless/ath/ath11k/pci.c +8 -0
@@ -1007,10 +1007,18 @@ static void ath11k_pci_remove(struct pci_dev *pdev)struct ath11k_base *ab =pci_get_drvdata (pdev);struct ath11k_pci *ab_pci =ath11k_pci_priv (ab); +if (test_bit (ATH11K_FLAG_QMI_FAIL , &ab->dev_flags)) { +ath11k_pci_power_down (ab); +ath11k_debugfs_soc_destroy (ab); +ath11k_qmi_deinit_service (ab); + goto qmi_fail; + } +set_bit (ATH11K_FLAG_UNREGISTERING , &ab->dev_flags);ath11k_core_deinit (ab); +qmi_fail:ath11k_mhi_unregister (ab_pci);ath11k_pci_free_irq (ab);
drivers/net/wireless/ath/ath11k/qmi.c +24 -13
@@ -2419,7 +2419,7 @@ ath11k_qmi_driver_event_post(struct ath11k_qmi *qmi,return 0 ; } -static void ath11k_qmi_event_server_arrive (struct ath11k_qmi *qmi) +static int ath11k_qmi_event_server_arrive (struct ath11k_qmi *qmi) {struct ath11k_base *ab = qmi->ab;int ret;
@@ -2427,17 +2427,19 @@ static void ath11k_qmi_event_server_arrive(struct ath11k_qmi *qmi) ret =ath11k_qmi_fw_ind_register_send (ab);if (ret <0 ) {ath11k_warn (ab,"qmi failed to send FW indication QMI:%d\n" , ret); -return ; +return ret; } ret =ath11k_qmi_host_cap_send (ab);if (ret <0 ) {ath11k_warn (ab,"qmi failed to send host cap QMI:%d\n" , ret); -return ; +return ret; } + +return ret; } -static void ath11k_qmi_event_mem_request (struct ath11k_qmi *qmi) +static int ath11k_qmi_event_mem_request (struct ath11k_qmi *qmi) {struct ath11k_base *ab = qmi->ab;int ret;
@@ -2445,11 +2447,13 @@ static void ath11k_qmi_event_mem_request(struct ath11k_qmi *qmi) ret =ath11k_qmi_respond_fw_mem_request (ab);if (ret <0 ) {ath11k_warn (ab,"qmi failed to respond fw mem req:%d\n" , ret); -return ; +return ret; } + +return ret; } -static void ath11k_qmi_event_load_bdf (struct ath11k_qmi *qmi) +static int ath11k_qmi_event_load_bdf (struct ath11k_qmi *qmi) {struct ath11k_base *ab = qmi->ab;int ret;
@@ -2457,7 +2461,7 @@ static void ath11k_qmi_event_load_bdf(struct ath11k_qmi *qmi) ret =ath11k_qmi_request_target_cap (ab);if (ret <0 ) {ath11k_warn (ab,"qmi failed to req target capabilities:%d\n" , ret); -return ; +return ret; }if (ab->bus_params.fixed_bdf_addr)
@@ -2466,14 +2470,16 @@ static void ath11k_qmi_event_load_bdf(struct ath11k_qmi *qmi) ret =ath11k_qmi_load_bdf_qmi (ab);if (ret <0 ) {ath11k_warn (ab,"qmi failed to load board data file:%d\n" , ret); -return ; +return ret; } ret =ath11k_qmi_wlanfw_m3_info_send (ab);if (ret <0 ) {ath11k_warn (ab,"qmi failed to send m3 info req:%d\n" , ret); -return ; +return ret; } + +return ret; } static void ath11k_qmi_msg_mem_request_cb(struct qmi_handle *qmi_hdl,
@@ -2613,7 +2619,7 @@ static int ath11k_qmi_ops_new_server(struct qmi_handle *qmi_hdl,ath11k_dbg (ab,ATH11K_DBG_QMI ,"qmi wifi fw qmi service connected\n" );ath11k_qmi_driver_event_post (qmi,ATH11K_QMI_EVENT_SERVER_ARRIVE ,NULL ); -return 0 ; +return ret; } static void ath11k_qmi_ops_del_server(struct qmi_handle *qmi_hdl,
@@ -2637,6 +2643,7 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work) event_work);struct ath11k_qmi_driver_event *event;struct ath11k_base *ab = qmi->ab; +int ret =0 ;spin_lock (&qmi->event_lock);while (!list_empty (&qmi->event_list)) {
@@ -2650,17 +2657,17 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work)switch (event->type) {case ATH11K_QMI_EVENT_SERVER_ARRIVE : -ath11k_qmi_event_server_arrive (qmi); + ret =ath11k_qmi_event_server_arrive (qmi);break ;case ATH11K_QMI_EVENT_SERVER_EXIT :set_bit (ATH11K_FLAG_CRASH_FLUSH , &ab->dev_flags);set_bit (ATH11K_FLAG_RECOVERY , &ab->dev_flags);break ;case ATH11K_QMI_EVENT_REQUEST_MEM : -ath11k_qmi_event_mem_request (qmi); + ret =ath11k_qmi_event_mem_request (qmi);break ;case ATH11K_QMI_EVENT_FW_MEM_READY : -ath11k_qmi_event_load_bdf (qmi); + ret =ath11k_qmi_event_load_bdf (qmi);break ;case ATH11K_QMI_EVENT_FW_READY :if (test_bit (ATH11K_FLAG_REGISTERED , &ab->dev_flags)) {
@@ -2688,6 +2695,9 @@ static void ath11k_qmi_driver_event_work(struct work_struct *work)break ; }kfree (event); +if (ret <0 ) +set_bit (ATH11K_FLAG_QMI_FAIL , &ab->dev_flags); +spin_lock (&qmi->event_lock); }spin_unlock (&qmi->event_lock);
@@ -2740,4 +2750,5 @@ void ath11k_qmi_deinit_service(struct ath11k_base *ab)ath11k_qmi_m3_free (ab);ath11k_qmi_free_target_mem_chunk (ab); } +EXPORT_SYMBOL (ath11k_qmi_deinit_service);
Signature · 7 lines
2.7.4 -- ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 10 lines · Anilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working.
Logs:
Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper
qmi failed to load CAL: IPQ8074/caldata.bin
qmi failed to load board data file:-11
Quoted 3 lines
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Signed-off-by Anilkumar Kolli <[email protected]>
With this patch reloading ath11k (which has worked fine before) crashes the kernel on QCA6390 hw2.0:
Nov 25 16:00:52 nuc1 [ 393.188277] BUG: unable to handle page fault for address: ffffffffc05b8e38 Nov 25 16:00:52 nuc1 [ 393.188300] #PF: supervisor read access in kernel mode Nov 25 16:00:52 nuc1 [ 393.188312] #PF: error_code(0x0000) - not-present page
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 16 lines · Kalle Valo
Quoted 10 lines · Anilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working.
Logs:
Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper
qmi failed to load CAL: IPQ8074/caldata.bin
qmi failed to load board data file:-11Quoted 3 lines
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Signed-off-by Anilkumar Kolli <[email protected]>
Quoted 7 lines
With this patch reloading ath11k (which has worked fine before) crashes the kernel on QCA6390 hw2.0:
Nov 25 16:00:52 nuc1 [ 393.188277] BUG: unable to handle page fault for address: ffffffffc05b8e38 Nov 25 16:00:52 nuc1 [ 393.188300] #PF: supervisor read access in kernel mode Nov 25 16:00:52 nuc1 [ 393.188312] #PF: error_code(0x0000) - not-present page
I will test this in QCA6390 and update.
Which branch should I use for testing. master or ath11k-qca6390-bringup ?
Thanks
Anil
Signature · 3 lines
ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k
Quoted 28 lines · [email protected] writes:
Quoted 20 lines · Kalle Valo
Quoted 10 lines · Anilkumar Kolli
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working.
Logs:
Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper
qmi failed to load CAL: IPQ8074/caldata.bin
qmi failed to load board data file:-11Quoted 4 lines
Tested-on: IPQ8074 hw2.0 AHB
WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1Signed-off-by Anilkumar Kolli <[email protected]>With this patch reloading ath11k (which has worked fine before) crashes the kernel on QCA6390 hw2.0:
Quoted 6 lines
Nov 25 16:00:52 nuc1 [ 393.188277] BUG: unable to handle page fault for address: ffffffffc05b8e38 Nov 25 16:00:52 nuc1 [ 393.188300] #PF: supervisor read access in kernel mode Nov 25 16:00:52 nuc1 [ 393.188312] #PF: error_code(0x0000) -not-present page
Quoted 3 lines
I will test this in QCA6390 and update.
Which branch should I use for testing. master or
ath11k-qca6390-bringup ?
Please use master branch.
ath11k-qca6390-bringup is just a temporary branch for collecting all important QCA6390 patches in one place.
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches -- ath11k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath11k