How to limit the Upload speed for an specific IP?
Hello,
I want to limit the upload speed for the eth0 Interface for an specific IP.
I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both!
DEV='eth0'
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit
tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst 192.168.0.2 flowid 1:1
Greetz
If traffic is outbound to another interface, limit the traffic on that interface. If traffic is destined to local, you will need either ingress policing or IMQ(www.linuximq.net).
Rubens
Quoted 6 lines · Morten Kramer
Hello,
I want to limit the upload speed for the eth0 Interface for an specific IP.
I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both!
Quoted 10 lines
DEV='eth0'
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit
tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst 192.168.0.2 flowid 1:1Greetz
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/