Skip to contentSkip to conversation

How to limit the Upload speed for an specific IP?

LARTC Morten Kramer 2 participants 2 messages Mar 22, 2004 – Mar 23, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

I want to limit the upload speed for the eth0 Interface for an specific IP.

I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both!

DEV='eth0'
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit
tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst 192.168.0.2 flowid 1:1

Greetz

#1 lore raw

If traffic is outbound to another interface, limit the traffic on that interface. If traffic is destined to local, you will need either ingress policing or IMQ(www.linuximq.net).

Rubens

Quoted 6 lines · Morten Kramer

Hello,

I want to limit the upload speed for the eth0 Interface for an specific IP.

I used the following script, but its only limits the DOWNLOAD speed.But i want to limit both!

Quoted 10 lines

DEV='eth0'
tc qdisc add dev $DEV root handle 1: cbq avpkt 1000 bandwidth 768kbit
tc class add dev $DEV parent 1: classid 1:1 cbq rate 100kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV parent 1: protocol ip prio 16 u32 match ip dst 192.168.0.2 flowid 1:1

Greetz

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/