x86/resctrl: Misc cleanup
Subsystems (2)
James Morse
reviewercover x86/resctrl: Misc cleanup
Hello!
These are the miscellaneous cleanup patches that floated to the top of the MPAM tree. (more on that story later).
The only interesting thing are the patches to make the AMD/Intel differences something resctrl understands, instead of just 'happening' because of the different function pointers.
This will become more important once MPAM support is added. parse_bw() and friends are what enforces resctrl's ABI resctrl. Allowing an architecture/platform to provide a subtly different function here would be bad for user-space.
MPAM would set arch_has_sparse_bitmaps, but not arch_needs_linear.
Nothing in this series should change any behaviour. This series is based on v5.6-rc1.
Thanks,
James Morse (10):
x86/resctrl: Nothing uses struct mbm_state chunks_bw x86/resctrl: Remove max_delay
x86/resctrl: Fix stale comment
x86/resctrl: use container_of() in delayed_work handlers x86/resctrl: Include pid.h
x86/resctrl: Use is_closid_match() in more places x86/resctrl: Add arch_needs_linear to explain AMD/Intel MBA difference x86/resctrl: Merge AMD/Intel parse_bw() calls
x86/resctrl: Add arch_has_sparse_bitmaps to explain AMD/Intel CAT
difference
cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
arch/x86/kernel/cpu/resctrl/core.c | 36 ++++------ arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 87 +++-------------------- arch/x86/kernel/cpu/resctrl/internal.h | 19 ++--- arch/x86/kernel/cpu/resctrl/monitor.c | 15 +--- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 32 ++++----- include/linux/cacheinfo.h | 18 +++++ include/linux/resctrl.h | 2 + 7 files changed, 67 insertions(+), 142 deletions(-)
Signature · 1 line
2.24.1
James Morse
reviewerPATCH 1/10 x86/resctrl: Nothing uses struct mbm_state chunks_bw
Nothing reads struct mbm_states's chunks_bw value, its a copy of chunks. Remove it.
--- arch/x86/kernel/cpu/resctrl/internal.h | 2 -- arch/x86/kernel/cpu/resctrl/monitor.c | 3 +-- 2 files changed, 1 insertion(+), 4 deletions(-)
arch/x86/kernel/cpu/resctrl/internal.h +0 -2
@@ -275,7 +275,6 @@ struct rftype {* struct mbm_state - status for each MBM counter in each domain * @chunks: Total data moved (multiply by rdt_group.mon_scale to get bytes) * @prev_msr Value of IA32_QM_CTR for this RMID last time we read it -* @chunks_bw Total local data moved. Used for bandwidth calculation * @prev_bw_msr:Value of previous IA32_QM_CTR for bandwidth counting * @prev_bw The most recent bandwidth in MBps * @delta_bw Difference between the current and previous bandwidth
@@ -284,7 +283,6 @@ struct rftype {struct mbm_state {u64 chunks;u64 prev_msr; -u64 chunks_bw;u64 prev_bw_msr;u32 prev_bw;u32 delta_bw;
arch/x86/kernel/cpu/resctrl/monitor.c +1 -2
@@ -279,8 +279,7 @@ static void mbm_bw_count(u32 rmid, struct rmid_read *rr)return ; chunks =mbm_overflow_count (m->prev_bw_msr, tval); - m->chunks_bw += chunks; - m->chunks = m->chunks_bw; + m->chunks += chunks; cur_bw = (chunks * r->mon_scale) >>20 ;if (m->delta_comp)
Signature · 1 line
2.24.1
Re: [PATCH 01/10] x86/resctrl: Nothing uses struct mbm_state chunks_bw
Hi James,
Quoted 5 lines · James Morse
Nothing reads struct mbm_states's
chunks_bwvalue, its a copy of chunks. Remove it.Signed-off-by James Morse <[email protected]>---
Thank you
Reinette
James Morse
reviewerPATCH 2/10 x86/resctrl: Remove max_delay
In reply to James Morsemax_delay is used by x86's rdt_get_mem_config() as a local variable. Remove it, replacing it with a local variable.
--- arch/x86/kernel/cpu/resctrl/core.c | 8 ++++---- arch/x86/kernel/cpu/resctrl/internal.h | 3 --- 2 files changed, 4 insertions(+), 7 deletions(-)
arch/x86/kernel/cpu/resctrl/core.c +4 -4
@@ -254,16 +254,16 @@ static bool __get_mem_config_intel(struct rdt_resource *r) {union cpuid_0x10_3_eax eax;union cpuid_0x10_x_edx edx; -u32 ebx, ecx; +u32 ebx, ecx, max_delay;cpuid_count (0x00000010 ,3 , &eax.full, &ebx, &ecx, &edx.full); r->num_closid = edx.split.cos_max +1 ; - r->membw.max_delay = eax.split.max_delay +1 ; + max_delay = eax.split.max_delay +1 ; r->default_ctrl =MAX_MBA_BW ;if (ecx &MBA_IS_LINEAR ) { r->membw.delay_linear = true; - r->membw.min_bw =MAX_MBA_BW - r->membw.max_delay; - r->membw.bw_gran =MAX_MBA_BW - r->membw.max_delay; + r->membw.min_bw =MAX_MBA_BW - max_delay; + r->membw.bw_gran =MAX_MBA_BW - max_delay; }else {if (!rdt_get_mb_table (r))return false;
arch/x86/kernel/cpu/resctrl/internal.h +0 -3
@@ -361,8 +361,6 @@ struct rdt_cache {/** * struct rdt_membw - Memory bandwidth allocation related data -* @max_delay: Max throttle delay. Delay is the hardware -* representation for memory bandwidth. * @min_bw: Minimum memory bandwidth percentage user can request * @bw_gran: Granularity at which the memory bandwidth is allocated * @delay_linear: True if memory B/W delay is in linear scale
@@ -370,7 +368,6 @@ struct rdt_cache {* @mb_map: Mapping of memory B/W percentage to memory B/W delay */ struct rdt_membw { -u32 max_delay;u32 min_bw;u32 bw_gran;u32 delay_linear;
Signature · 1 line
2.24.1
Re: [PATCH 02/10] x86/resctrl: Remove max_delay
Hi James,
Quoted 1 line · James Morse
max_delayis used by x86'srdt_get_mem_config()as a local variable.
get_mem_config() may be more appropriate since rdt_get_mem_config() does not exist, __get_mem_config_intel() would be most accurate.
Quoted 4 lines
Remove it, replacing it with a local variable.
Signed-off-by James Morse <[email protected]>---
Apart from the above ...
Thank you
Reinette
James Morse
reviewerPATCH 3/10 x86/resctrl: Fix stale comment
In reply to James MorseThe comment in rdtgroup_init() refers to the non existent function rdt_mount(), which has now been renamed rdt_get_tree(). Fix the comment.
--- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/cpu/resctrl/rdtgroup.c +1 -1
@@ -3181,7 +3181,7 @@ int __init rdtgroup_init(void)* It may also be ok since that would enable debugging of RDT before * resctrl is mounted. * The reason why the debugfs directory is created here and not in -* rdt_mount() is because rdt_mount() takes rdtgroup_mutex and +* rdt_get_tree() is because rdt_get_tree() takes rdtgroup_mutex and * during the debugfs directory creation also &sb->s_type->i_mutex_key * (the lockdep class of inode->i_rwsem). Other filesystem * interactions (eg. SyS_getdents) have the lock ordering:
Signature · 1 line
2.24.1
Re: [PATCH 03/10] x86/resctrl: Fix stale comment
Hi James,
Quoted 6 lines · James Morse
The comment in
rdtgroup_init()refers to the non existent functionrdt_mount(), which has now been renamedrdt_get_tree(). Fix the comment.Signed-off-by James Morse <[email protected]>---
Thank you
Reinette
James Morse
reviewerPATCH 4/10 x86/resctrl: use container_of() in delayed_work handlers
In reply to James Morsembm_handle_overflow() and cqm_handle_limbo() are both provided with the domain's work_struct when called, but use get_domain_from_cpu() to find the domain, along with the appropriate error handling.
container_of() saves some list walking and bitmap testing, use that instead.
--- arch/x86/kernel/cpu/resctrl/monitor.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-)
arch/x86/kernel/cpu/resctrl/monitor.c +2 -10
@@ -476,19 +476,13 @@ void cqm_handle_limbo(struct work_struct *work)mutex_lock (&rdtgroup_mutex); r = &rdt_resources_all[RDT_RESOURCE_L3 ]; - d =get_domain_from_cpu (cpu, r); - -if (!d) { -pr_warn_once ("Failure to get domain for limbo worker\n" ); - goto out_unlock; - } + d = container_of(work, struct rdt_domain, cqm_limbo.work);__check_limbo (d, false);if (has_busy_rmid (r, d))schedule_delayed_work_on (cpu, &d->cqm_limbo, delay); -out_unlock:mutex_unlock (&rdtgroup_mutex); }
@@ -516,9 +510,7 @@ void mbm_handle_overflow(struct work_struct *work)if (!static_branch_likely (&rdt_mon_enable_key)) goto out_unlock; - d =get_domain_from_cpu (cpu, &rdt_resources_all[RDT_RESOURCE_L3 ]); -if (!d) - goto out_unlock; + d = container_of(work, struct rdt_domain, mbm_over.work);list_for_each_entry (prgrp, &rdt_all_groups, rdtgroup_list) {mbm_update (d, prgrp->mon.rmid);
Signature · 1 line
2.24.1
Re: [PATCH 04/10] x86/resctrl: use container_of() in delayed_work handlers
Hi James,
Quoted 9 lines · James Morse
mbm_handle_overflow()andcqm_handle_limbo()are both provided with the domain'swork_structwhen called, but useget_domain_from_cpu()to find the domain, along with the appropriate error handling.
container_of()saves some list walking and bitmap testing, use that instead.Signed-off-by James Morse <[email protected]>---
Thank you
Reinette
James Morse
reviewerPATCH 5/10 x86/resctrl: Include pid.h
In reply to James MorseWe are about to disturb the header soup. This header uses struct pid and struct pid_namespace. Include their header.
--- include/linux/resctrl.h | 2 ++ 1 file changed, 2 insertions(+)
include/linux/resctrl.h +2 -0
@@ -2,6 +2,8 @@#ifndef _RESCTRL_H#define _RESCTRL_H +#include <linux/pid.h> +#ifdef CONFIG_PROC_CPU_RESCTRL int proc_resctrl_show(struct seq_file *m,
Signature · 1 line
2.24.1
Re: [PATCH 05/10] x86/resctrl: Include pid.h
Hi James,
Quoted 5 lines · James Morse
We are about to disturb the header soup. This header uses struct pid and struct
pid_namespace. Include their header.Signed-off-by James Morse <[email protected]>---
Thank you
Reinette
James Morse
reviewerPATCH 6/10 x86/resctrl: Use is_closid_match() in more places
In reply to James Morserdtgroup_tasks_assigned() and show_rdt_tasks() loop over threads testing for a CTRL/MON group match by closid/rmid with the provided rdtgrp. Further down the file are helpers to do this, move these further up and make use of them here.
These helpers additionally check for alloc/mon capable. This is harmless as rdtgroup_mkdir() tests these capable flags before allowing the config directories to be created.
--- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 30 ++++++++++++-------------- 1 file changed, 14 insertions(+), 16 deletions(-)
arch/x86/kernel/cpu/resctrl/rdtgroup.c +14 -16
@@ -592,6 +592,18 @@ static int __rdtgroup_move_task(struct task_struct *tsk,return ret; } +static bool is_closid_match (struct task_struct *t,struct rdtgroup *r) +{ +return (rdt_alloc_capable && + (r->type ==RDTCTRL_GROUP ) && (t->closid == r->closid)); +} + +static bool is_rmid_match (struct task_struct *t,struct rdtgroup *r) +{ +return (rdt_mon_capable && + (r->type ==RDTMON_GROUP ) && (t->rmid == r->mon.rmid)); +} +/** * rdtgroup_tasks_assigned - Test if tasks have been assigned to resource group * @r: Resource group
@@ -607,8 +619,7 @@ int rdtgroup_tasks_assigned(struct rdtgroup *r)rcu_read_lock ();for_each_process_thread (p, t) { -if ((r->type ==RDTCTRL_GROUP && t->closid == r->closid) || - (r->type ==RDTMON_GROUP && t->rmid == r->mon.rmid)) { +if (is_closid_match (t, r) ||is_rmid_match (t, r)) { ret =1 ;break ; }
@@ -706,8 +717,7 @@ static void show_rdt_tasks(struct rdtgroup *r, struct seq_file *s)rcu_read_lock ();for_each_process_thread (p, t) { -if ((r->type ==RDTCTRL_GROUP && t->closid == r->closid) || - (r->type ==RDTMON_GROUP && t->rmid == r->mon.rmid)) +if (is_closid_match (t, r) ||is_rmid_match (t, r))seq_printf (s,"%d\n" , t->pid); }rcu_read_unlock ();
@@ -2231,18 +2241,6 @@ static int reset_all_ctrls(struct rdt_resource *r)return 0 ; } -static bool is_closid_match (struct task_struct *t,struct rdtgroup *r) -{ -return (rdt_alloc_capable && - (r->type ==RDTCTRL_GROUP ) && (t->closid == r->closid)); -} - -static bool is_rmid_match (struct task_struct *t,struct rdtgroup *r) -{ -return (rdt_mon_capable && - (r->type ==RDTMON_GROUP ) && (t->rmid == r->mon.rmid)); -} -/* * Move tasks from one to the other group. If @from is NULL, then all tasks * in the systems are moved unconditionally (used for teardown).
Signature · 1 line
2.24.1
Re: [PATCH 06/10] x86/resctrl: Use is_closid_match() in more places
Hi James,
Quoted 10 lines · James Morse
rdtgroup_tasks_assigned()andshow_rdt_tasks()loop over threads testing for a CTRL/MON group match by closid/rmid with the provided rdtgrp. Further down the file are helpers to do this, move these further up and make use of them here.These helpers additionally check for alloc/mon capable. This is harmless as
rdtgroup_mkdir()tests these capable flags before allowing the config directories to be created.Signed-off-by James Morse <[email protected]>
Thank you
Reinette
James Morse
reviewerPATCH 7/10 x86/resctrl: Add arch_needs_linear to explain AMD/Intel MBA difference
In reply to James MorseThe configuration values user-space provides to the resctrl filesystem are ABI. To make this work on another architecture we want to move all the ABI bits out of /arch/x86 and under /fs.
To do this, the differences between AMD and Intel CPUs needs to be explained to resctrl via resource properties, instead of function pointers that let the arch code accept subtly different values on different platforms/architectures.
For MBA, Intel CPUs reject configuration attempts for non-linear resources, whereas AMD ignore this field as its MBA resource is never linear. To merge the parse/validate functions we need to explain this difference.
Add arch_needs_linear to indicate the arch code needs the linear property to be true to configure this resource. AMD can set this and delay_linear to false. Intel can set arch_needs_linear to true to keep the existing "No support for non-linear MB domains" error message for affected platforms.
--- arch/x86/kernel/cpu/resctrl/core.c | 3 +++ arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 8 +++++++- arch/x86/kernel/cpu/resctrl/internal.h | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-)
arch/x86/kernel/cpu/resctrl/core.c +3 -0
@@ -260,6 +260,7 @@ static bool __get_mem_config_intel(struct rdt_resource *r) r->num_closid = edx.split.cos_max +1 ; max_delay = eax.split.max_delay +1 ; r->default_ctrl =MAX_MBA_BW ; + r->membw.arch_needs_linear = true;if (ecx &MBA_IS_LINEAR ) { r->membw.delay_linear = true; r->membw.min_bw =MAX_MBA_BW - max_delay;
@@ -267,6 +268,7 @@ static bool __get_mem_config_intel(struct rdt_resource *r) }else {if (!rdt_get_mb_table (r))return false; + r->membw.arch_needs_linear = false; } r->data_width =3 ;
@@ -288,6 +290,7 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)/* AMD does not use delay */ r->membw.delay_linear = false; + r->membw.arch_needs_linear = false; r->membw.min_bw =0 ; r->membw.bw_gran =1 ;
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +7 -1
@@ -33,6 +33,12 @@ static bool bw_validate_amd(char *buf, unsigned long *data,unsigned long bw;int ret; +/* temporary: always false on AMD */ +if (!r->membw.delay_linear && r->membw.arch_needs_linear) { +rdt_last_cmd_puts ("No support for non-linear MB domains\n" ); +return false; + } + ret =kstrtoul (buf,10 , &bw);if (ret) {rdt_last_cmd_printf ("Non-decimal digit in MB value %s\n" , buf);
@@ -82,7 +88,7 @@ static bool bw_validate(char *buf, unsigned long *data, struct rdt_resource *r)/* * Only linear delay values is supported for current Intel SKUs. */ -if (!r->membw.delay_linear) { +if (!r->membw.delay_linear && r->membw.arch_needs_linear) {rdt_last_cmd_puts ("No support for non-linear MB domains\n" );return false; }
arch/x86/kernel/cpu/resctrl/internal.h +2 -0
@@ -363,6 +363,7 @@ struct rdt_cache {* struct rdt_membw - Memory bandwidth allocation related data * @min_bw: Minimum memory bandwidth percentage user can request * @bw_gran: Granularity at which the memory bandwidth is allocated +* @arch_needs_linear: True if we can't configure non-linear resources * @delay_linear: True if memory B/W delay is in linear scale * @mba_sc: True if MBA software controller(mba_sc) is enabled * @mb_map: Mapping of memory B/W percentage to memory B/W delay
@@ -371,6 +372,7 @@ struct rdt_membw {u32 min_bw;u32 bw_gran;u32 delay_linear; +bool arch_needs_linear;bool mba_sc;u32 *mb_map; };
Signature · 1 line
2.24.1
Re: [PATCH 07/10] x86/resctrl: Add arch_needs_linear to explain AMD/Intel MBA difference
Hi James,
Quoted 86 lines · James Morse
The configuration values user-space provides to the resctrl filesystem are ABI. To make this work on another architecture we want to move all the ABI bits out of /arch/x86 and under /fs.
To do this, the differences between AMD and Intel CPUs needs to be explained to resctrl via resource properties, instead of function pointers that let the arch code accept subtly different values on different platforms/architectures.
For MBA, Intel CPUs reject configuration attempts for non-linear resources, whereas AMD ignore this field as its MBA resource is never linear. To merge the parse/validate functions we need to explain this difference.
Add
arch_needs_linearto indicate the arch code needs the linear property to be true to configure this resource. AMD can set this anddelay_linearto false. Intel can setarch_needs_linearto true to keep the existing "No support for non-linear MB domains" error message for affected platforms.Signed-off-by James Morse <[email protected]>--- arch/x86/kernel/cpu/resctrl/core.c | 3 +++ arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 8 +++++++- arch/x86/kernel/cpu/resctrl/internal.h | 2 ++ 3 files changed, 12 insertions(+), 1 deletion(-)arch/x86/kernel/cpu/resctrl/core.c +3
-0@@ -260,6 +260,7 @@ static bool __get_mem_config_intel(struct rdt_resource *r) r->num_closid = edx.split.cos_max +1 ; max_delay = eax.split.max_delay +1 ; r->default_ctrl =MAX_MBA_BW ; + r->membw.arch_needs_linear = true;if (ecx &MBA_IS_LINEAR ) { r->membw.delay_linear = true; r->membw.min_bw =MAX_MBA_BW - max_delay;@@ -267,6 +268,7 @@ static bool __get_mem_config_intel(struct rdt_resource *r) }else {if (!rdt_get_mb_table (r))return false; + r->membw.arch_needs_linear = false; } r->data_width =3 ;@@ -288,6 +290,7 @@ static bool __rdt_get_mem_config_amd(struct rdt_resource *r)/* AMD does not use delay */ r->membw.delay_linear = false; + r->membw.arch_needs_linear = false; r->membw.min_bw =0 ; r->membw.bw_gran =1 ;arch/x86/kernel/cpu/resctrl/ctrlmondata.c +7
-1@@ -33,6 +33,12 @@ static bool bw_validate_amd(char *buf, unsigned long *data,unsigned long bw;int ret; +/* temporary: always false on AMD */ +if (!r->membw.delay_linear && r->membw.arch_needs_linear) { +rdt_last_cmd_puts ("No support for non-linear MB domains\n" ); +return false; + } + ret =kstrtoul (buf,10 , &bw);if (ret) {rdt_last_cmd_printf ("Non-decimal digit in MB value %s\n" , buf);@@ -82,7 +88,7 @@ static bool bw_validate(char *buf, unsigned long *data, struct rdt_resource *r)/* * Only linear delay values is supported for current Intel SKUs. */ -if (!r->membw.delay_linear) { +if (!r->membw.delay_linear && r->membw.arch_needs_linear) {rdt_last_cmd_puts ("No support for non-linear MB domains\n" );return false; }arch/x86/kernel/cpu/resctrl/internal.h +0
-0
arch/x86/kernel/cpu/resctrl/internal.h struct rdt_cache { · line 369
Quoted 7 lines
arch/x86/kernel/cpu/resctrl/internal.h +1
-0@@ -363,6 +363,7 @@ struct rdt_cache {* struct rdt_membw - Memory bandwidth allocation related data * @min_bw: Minimum memory bandwidth percentage user can request * @bw_gran: Granularity at which the memory bandwidth is allocated +* @arch_needs_linear: True if we can't configure non-linear resources * @delay_linear: True if memory B/W delay is in linear scale * @mba_sc: True if MBA software controller(mba_sc) is enabled * @mb_map: Mapping of memory B/W percentage to memory B/W delay
This area uses tab for spacing.
arch/x86/kernel/cpu/resctrl/internal.h struct rdt_membw { · line 378
Quoted 9 lines
arch/x86/kernel/cpu/resctrl/internal.h +1
-0@@ -371,6 +372,7 @@ struct rdt_membw {u32 min_bw;u32 bw_gran;u32 delay_linear; +bool arch_needs_linear;bool mba_sc;u32 *mb_map; };
Babu may want to take a look.
Just the one small comment from my side, apart from that it looks good to me.
Thank you
Reinette
James Morse
reviewerPATCH 8/10 x86/resctrl: Merge AMD/Intel parse_bw() calls
In reply to James MorseNow that we've explained arch_needs_linear to resctrl, the parse_bw() calls are almost the same between AMD and Intel.
The difference is '!is_mba_sc()', which is not checked on AMD. This will always be true on AMD CPUs as mba_sc cannot be enabled as is_mba_linear() is false.
Removing this duplication means user-space visible behaviour and error messages are not validated or generated in different places.
--- arch/x86/kernel/cpu/resctrl/core.c | 4 +- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 55 +---------------------- arch/x86/kernel/cpu/resctrl/internal.h | 6 +-- 3 files changed, 5 insertions(+), 60 deletions(-)
arch/x86/kernel/cpu/resctrl/core.c +2 -2
@@ -924,7 +924,7 @@ static __init void rdt_init_res_defs_intel(void)else if (r->rid ==RDT_RESOURCE_MBA ) { r->msr_base =MSR_IA32_MBA_THRTL_BASE ; r->msr_update = mba_wrmsr_intel; - r->parse_ctrlval = parse_bw_intel; + r->parse_ctrlval = parse_bw; } } }
@@ -944,7 +944,7 @@ static __init void rdt_init_res_defs_amd(void)else if (r->rid ==RDT_RESOURCE_MBA ) { r->msr_base =MSR_IA32_MBA_BW_BASE ; r->msr_update = mba_wrmsr_amd; - r->parse_ctrlval = parse_bw_amd; + r->parse_ctrlval = parse_bw; } } }
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +1 -54
67 lines not on this page · raw message
arch/x86/kernel/cpu/resctrl/internal.h +2 -4
@@ -462,10 +462,8 @@ struct rdt_resource {int parse_cbm (struct rdt_parse_data *data,struct rdt_resource *r,struct rdt_domain *d); -int parse_bw_intel (struct rdt_parse_data *data,struct rdt_resource *r, -struct rdt_domain *d); -int parse_bw_amd (struct rdt_parse_data *data,struct rdt_resource *r, -struct rdt_domain *d); +int parse_bw (struct rdt_parse_data *data,struct rdt_resource *r, +struct rdt_domain *d);extern struct mutex rdtgroup_mutex;
Signature · 1 line
2.24.1
Reinette Chatre
maintainerRe: [PATCH 08/10] x86/resctrl: Merge AMD/Intel parse_bw() calls
Hi James,
Quoted 31 lines · James Morse
Now that we've explained
arch_needs_linearto resctrl, theparse_bw()calls are almost the same between AMD and Intel.The difference is '!is_mba_sc()', which is not checked on AMD. This will always be true on AMD CPUs as
mba_sccannot be enabled asis_mba_linear()is false.Removing this duplication means user-space visible behaviour and error messages are not validated or generated in different places.
Signed-off-by James Morse <[email protected]>--- arch/x86/kernel/cpu/resctrl/core.c | 4 +- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 55 +---------------------- arch/x86/kernel/cpu/resctrl/internal.h | 6 +-- 3 files changed, 5 insertions(+), 60 deletions(-)arch/x86/kernel/cpu/resctrl/core.c +1
-1@@ -924,7 +924,7 @@ static __init void rdt_init_res_defs_intel(void)else if (r->rid ==RDT_RESOURCE_MBA ) { r->msr_base =MSR_IA32_MBA_THRTL_BASE ; r->msr_update = mba_wrmsr_intel; - r->parse_ctrlval = parse_bw_intel; + r->parse_ctrlval = parse_bw; } } }
arch/x86/kernel/cpu/resctrl/core.c static __init void rdt_init_res_defs_amd(void) · line 950
Quoted 8 lines
arch/x86/kernel/cpu/resctrl/core.c +1
-1@@ -944,7 +944,7 @@ static __init void rdt_init_res_defs_amd(void)else if (r->rid ==RDT_RESOURCE_MBA ) { r->msr_base =MSR_IA32_MBA_BW_BASE ; r->msr_update = mba_wrmsr_amd; - r->parse_ctrlval = parse_bw_amd; + r->parse_ctrlval = parse_bw; } } }
Now that these values are identical more duplication can be avoided by moving the initialization to earlier where rdt_resources_all[] is initialized. Could you please modify this patch to do so?
Quoted 65 lines
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +0
-53@@ -21,59 +21,6 @@#include <linux/slab.h> #include "internal.h" -/* -* Check whether MBA bandwidth percentage value is correct. The value is -* checked against the minimum and maximum bandwidth values specified by -* the hardware. The allocated bandwidth percentage is rounded to the next -* control step available on the hardware. -*/ -static bool bw_validate_amd (char *buf,unsigned long *data, -struct rdt_resource *r) -{ -unsigned long bw; -int ret; - -/* temporary: always false on AMD */ -if (!r->membw.delay_linear && r->membw.arch_needs_linear) { -rdt_last_cmd_puts ("No support for non-linear MB domains\n" ); -return false; - } - - ret =kstrtoul (buf,10 , &bw); -if (ret) { -rdt_last_cmd_printf ("Non-decimal digit in MB value %s\n" , buf); -return false; - } - -if (bw < r->membw.min_bw || bw > r->default_ctrl) { -rdt_last_cmd_printf ("MB value %ld out of range [%d,%d]\n" , bw, - r->membw.min_bw, r->default_ctrl); -return false; - } - - *data =roundup (bw, (unsigned long )r->membw.bw_gran); -return true; -} - -int parse_bw_amd (struct rdt_parse_data *data,struct rdt_resource *r, -struct rdt_domain *d) -{ -unsigned long bw_val; - -if (d->have_new_ctrl) { -rdt_last_cmd_printf ("Duplicate domain %d\n" , d->id); -return -EINVAL ; - } - -if (!bw_validate_amd (data->buf, &bw_val, r)) -return -EINVAL ; - - d->new_ctrl = bw_val; - d->have_new_ctrl = true; - -return 0 ; -} -/* * Check whether MBA bandwidth percentage value is correct. The value is * checked against the minimum and max bandwidth values specified by the
arch/x86/kernel/cpu/resctrl/ctrlmondata.c static bool bw_validate(char *buf, unsigned long *data, struct rdt_resource *r) · line 61
Quoted 6 lines
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +1
-1@@ -110,7 +57,7 @@ static bool bw_validate(char *buf, unsigned long *data, struct rdt_resource *r)return true; } -int parse_bw_intel (struct rdt_parse_data *data,struct rdt_resource *r, +int parse_bw (struct rdt_parse_data *data,struct rdt_resource *r,struct rdt_domain *d)
This change affects the alignment here ... could you please fix the alignment to match open parenthesis?
Quoted 10 lines
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +0
-0{unsigned long bw_val;arch/x86/kernel/cpu/resctrl/internal.h +0
-0@@ -462,10 +462,8 @@ struct rdt_resource { int parse_cbm(struct rdt_parse_data *data, struct rdt_resource *r,
arch/x86/kernel/cpu/resctrl/internal.h struct rdt_resource { · line 469
Quoted 10 lines
arch/x86/kernel/cpu/resctrl/internal.h +2
-4struct rdt_domain *d); -int parse_bw_intel (struct rdt_parse_data *data,struct rdt_resource *r, -struct rdt_domain *d); -int parse_bw_amd (struct rdt_parse_data *data,struct rdt_resource *r, -struct rdt_domain *d); +int parse_bw (struct rdt_parse_data *data,struct rdt_resource *r, +struct rdt_domain *d);extern struct mutex rdtgroup_mutex;
Babu may want to take a look also.
Thank you
Reinette
James Morse
reviewerPATCH 9/10 x86/resctrl: Add arch_has_sparse_bitmaps to explain AMD/Intel CAT difference
In reply to James MorseIntel expects the cache bitmap provided by user-space to have on a single span of 1s, whereas AMD can support bitmaps like 0xf00f. Arm's MPAM support also allows sparse bitmaps.
To move resctrl out to /fs/ we need to explain platform differences like this. Add a resource property arch_has_sparse_bitmaps. Test this around the 'non-consecutive' test in cbm_validate().
Merging the validate calls causes AMD top gain the min_cbm_bits test needed for Haswell, but as it always sets this value to 1, it will never match.
--- arch/x86/kernel/cpu/resctrl/core.c | 4 +-- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 36 +++++------------------ arch/x86/kernel/cpu/resctrl/internal.h | 6 ++-- 3 files changed, 12 insertions(+), 34 deletions(-)
arch/x86/kernel/cpu/resctrl/core.c +2 -2
@@ -920,7 +920,7 @@ static __init void rdt_init_res_defs_intel(void) r->rid ==RDT_RESOURCE_L2 || r->rid ==RDT_RESOURCE_L2DATA || r->rid == RDT_RESOURCE_L2CODE) - r->cbm_validate = cbm_validate_intel; + r->cache.arch_has_sparse_bitmaps = false; else if (r->rid == RDT_RESOURCE_MBA) { r->msr_base =MSR_IA32_MBA_THRTL_BASE ; r->msr_update = mba_wrmsr_intel;
@@ -940,7 +940,7 @@ static __init void rdt_init_res_defs_amd(void) r->rid ==RDT_RESOURCE_L2 || r->rid ==RDT_RESOURCE_L2DATA || r->rid == RDT_RESOURCE_L2CODE) - r->cbm_validate = cbm_validate_amd; + r->cache.arch_has_sparse_bitmaps = true; else if (r->rid == RDT_RESOURCE_MBA) { r->msr_base =MSR_IA32_MBA_BW_BASE ; r->msr_update = mba_wrmsr_amd;
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +8 -28
@@ -76,12 +76,14 @@ int parse_bw(struct rdt_parse_data *data, struct rdt_resource *r, }/* -* Check whether a cache bit mask is valid. The SDM says: +* Check whether a cache bit mask is valid. +* For Intel The SDM says: * Please note that all (and only) contiguous '1' combinations * are allowed (e.g. FFFFH, 0FF0H, 003CH, etc.). * Additionally Haswell requires at least two bits set. +* AMD allows non-contiguous bitmasks. */ -bool cbm_validate_intel (char *buf,u32 *data,struct rdt_resource *r) +static bool cbm_validate (char *buf,u32 *data,struct rdt_resource *r) {unsigned long first_bit, zero_bit, val;unsigned int cbm_len = r->cache.cbm_len;
@@ -101,7 +103,9 @@ bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r) first_bit =find_first_bit (&val, cbm_len); zero_bit =find_next_zero_bit (&val, cbm_len, first_bit); -if (find_next_bit (&val, cbm_len, zero_bit) < cbm_len) { +/* Are non-contiguous bitmaps allowed? */ +if (!r->cache.arch_has_sparse_bitmaps && + (find_next_bit (&val, cbm_len, zero_bit) < cbm_len)) {rdt_last_cmd_printf ("The mask %lx has non-consecutive 1-bits\n" , val);return false; }
@@ -116,30 +120,6 @@ bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r)return true; } -/* -* Check whether a cache bit mask is valid. AMD allows non-contiguous -* bitmasks -*/ -bool cbm_validate_amd (char *buf,u32 *data,struct rdt_resource *r) -{ -unsigned long val; -int ret; - - ret =kstrtoul (buf,16 , &val); -if (ret) { -rdt_last_cmd_printf ("Non-hex character in the mask %s\n" , buf); -return false; - } - -if (val > r->default_ctrl) { -rdt_last_cmd_puts ("Mask out of range\n" ); -return false; - } - - *data = val; -return true; -} -/* * Read one cache bit mask (hex). Check that it is valid for the current * resource type.
@@ -165,7 +145,7 @@ int parse_cbm(struct rdt_parse_data *data, struct rdt_resource *r,return -EINVAL ; } -if (!r->cbm_validate (data->buf, &cbm_val, r)) +if (!cbm_validate (data->buf, &cbm_val, r))return -EINVAL ; if ((rdtgrp->mode == RDT_MODE_EXCLUSIVE ||
arch/x86/kernel/cpu/resctrl/internal.h +2 -4
@@ -350,6 +350,7 @@ struct msr_param {* in a cache bit mask * @shareable_bits: Bitmask of shareable resource with other * executing entities +* @arch_has_sparse_bitmaps: True if a bitmap like f00f is valid. */ struct rdt_cache {unsigned int cbm_len;
@@ -357,6 +358,7 @@ struct rdt_cache {unsigned int cbm_idx_mult;unsigned int cbm_idx_offset;unsigned int shareable_bits; +bool arch_has_sparse_bitmaps; };/**
@@ -426,7 +428,6 @@ struct rdt_parse_data {* @cache: Cache allocation related data * @format_str: Per resource format string to show domain value * @parse_ctrlval: Per resource function pointer to parse control values -* @cbm_validate Cache bitmask validate function * @evt_list: List of monitoring events * @num_rmid: Number of RMIDs available * @mon_scale: cqm counter * mon_scale = occupancy in bytes
@@ -453,7 +454,6 @@ struct rdt_resource {int (*parse_ctrlval)(struct rdt_parse_data *data,struct rdt_resource *r,struct rdt_domain *d); -bool (*cbm_validate)(char *buf,u32 *data,struct rdt_resource *r);struct list_head evt_list;int num_rmid;unsigned int mon_scale;
@@ -594,7 +594,5 @@ void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms);void cqm_handle_limbo (struct work_struct *work);bool has_busy_rmid (struct rdt_resource *r,struct rdt_domain *d);void __check_limbo (struct rdt_domain *d,bool force_free); -bool cbm_validate_intel (char *buf,u32 *data,struct rdt_resource *r); -bool cbm_validate_amd (char *buf,u32 *data,struct rdt_resource *r);#endif /* _ASM_X86_RESCTRL_INTERNAL_H */
Signature · 1 line
2.24.1
Re: [PATCH 09/10] x86/resctrl: Add arch_has_sparse_bitmaps to explain AMD/Intel CAT difference
Hi James,
Quoted 46 lines · James Morse
Intel expects the cache bitmap provided by user-space to have on a single span of 1s, whereas AMD can support bitmaps like
0xf00f. Arm's MPAM support also allows sparse bitmaps.To move resctrl out to /fs/ we need to explain platform differences like this. Add a resource property
arch_has_sparse_bitmaps. Test this around the 'non-consecutive' test incbm_validate().Merging the validate calls causes AMD top gain the
min_cbm_bitstest needed for Haswell, but as it always sets this value to 1, it will never match.Signed-off-by James Morse <[email protected]>--- arch/x86/kernel/cpu/resctrl/core.c | 4 +-- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 36 +++++------------------ arch/x86/kernel/cpu/resctrl/internal.h | 6 ++-- 3 files changed, 12 insertions(+), 34 deletions(-)arch/x86/kernel/cpu/resctrl/core.c +2
-2@@ -920,7 +920,7 @@ static __init void rdt_init_res_defs_intel(void) r->rid ==RDT_RESOURCE_L2 || r->rid ==RDT_RESOURCE_L2DATA || r->rid == RDT_RESOURCE_L2CODE) - r->cbm_validate = cbm_validate_intel; + r->cache.arch_has_sparse_bitmaps = false; else if (r->rid == RDT_RESOURCE_MBA) { r->msr_base =MSR_IA32_MBA_THRTL_BASE ; r->msr_update = mba_wrmsr_intel;@@ -940,7 +940,7 @@ static __init void rdt_init_res_defs_amd(void) r->rid ==RDT_RESOURCE_L2 || r->rid ==RDT_RESOURCE_L2DATA || r->rid == RDT_RESOURCE_L2CODE) - r->cbm_validate = cbm_validate_amd; + r->cache.arch_has_sparse_bitmaps = true; else if (r->rid == RDT_RESOURCE_MBA) { r->msr_base =MSR_IA32_MBA_BW_BASE ; r->msr_update = mba_wrmsr_amd;arch/x86/kernel/cpu/resctrl/ctrlmondata.c +0
-0
arch/x86/kernel/cpu/resctrl/ctrlmondata.c int parse_bw(struct rdt_parse_data *data, struct rdt_resource *r, · line 80
Quoted 6 lines
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +2
-1@@ -76,12 +76,14 @@ int parse_bw(struct rdt_parse_data *data, struct rdt_resource *r, }/* -* Check whether a cache bit mask is valid. The SDM says: +* Check whether a cache bit mask is valid. +* For Intel The SDM says:
s/The/the/
Quoted 66 lines
arch/x86/kernel/cpu/resctrl/ctrlmondata.c +6
-27* Please note that all (and only) contiguous '1' combinations * are allowed (e.g. FFFFH, 0FF0H, 003CH, etc.). * Additionally Haswell requires at least two bits set. +* AMD allows non-contiguous bitmasks. */ -bool cbm_validate_intel (char *buf,u32 *data,struct rdt_resource *r) +static bool cbm_validate (char *buf,u32 *data,struct rdt_resource *r) {unsigned long first_bit, zero_bit, val;unsigned int cbm_len = r->cache.cbm_len;@@ -101,7 +103,9 @@ bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r) first_bit =find_first_bit (&val, cbm_len); zero_bit =find_next_zero_bit (&val, cbm_len, first_bit); -if (find_next_bit (&val, cbm_len, zero_bit) < cbm_len) { +/* Are non-contiguous bitmaps allowed? */ +if (!r->cache.arch_has_sparse_bitmaps && + (find_next_bit (&val, cbm_len, zero_bit) < cbm_len)) {rdt_last_cmd_printf ("The mask %lx has non-consecutive 1-bits\n" , val);return false; }@@ -116,30 +120,6 @@ bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r)return true; } -/* -* Check whether a cache bit mask is valid. AMD allows non-contiguous -* bitmasks -*/ -bool cbm_validate_amd (char *buf,u32 *data,struct rdt_resource *r) -{ -unsigned long val; -int ret; - - ret =kstrtoul (buf,16 , &val); -if (ret) { -rdt_last_cmd_printf ("Non-hex character in the mask %s\n" , buf); -return false; - } - -if (val > r->default_ctrl) { -rdt_last_cmd_puts ("Mask out of range\n" ); -return false; - } - - *data = val; -return true; -} -/* * Read one cache bit mask (hex). Check that it is valid for the current * resource type. @@ -165,7 +145,7 @@ int parse_cbm(struct rdt_parse_data *data, struct rdt_resource *r,return -EINVAL ; } -if (!r->cbm_validate (data->buf, &cbm_val, r)) +if (!cbm_validate (data->buf, &cbm_val, r))return -EINVAL ; if ((rdtgrp->mode == RDT_MODE_EXCLUSIVE ||arch/x86/kernel/cpu/resctrl/internal.h +0
-0
arch/x86/kernel/cpu/resctrl/internal.h struct msr_param { · line 354
Quoted 5 lines
arch/x86/kernel/cpu/resctrl/internal.h +1
-0@@ -350,6 +350,7 @@ struct msr_param {* in a cache bit mask * @shareable_bits: Bitmask of shareable resource with other * executing entities +* @arch_has_sparse_bitmaps: True if a bitmap like f00f is valid. */
This area uses tab for spacing.
Quoted 28 lines
arch/x86/kernel/cpu/resctrl/internal.h +1
-2struct rdt_cache {unsigned int cbm_len;@@ -357,6 +358,7 @@ struct rdt_cache {unsigned int cbm_idx_mult;unsigned int cbm_idx_offset;unsigned int shareable_bits; +bool arch_has_sparse_bitmaps; };/** @@ -426,7 +428,6 @@ struct rdt_parse_data {* @cache: Cache allocation related data * @format_str: Per resource format string to show domain value * @parse_ctrlval: Per resource function pointer to parse control values -* @cbm_validate Cache bitmask validate function * @evt_list: List of monitoring events * @num_rmid: Number of RMIDs available * @mon_scale: cqm counter * mon_scale = occupancy in bytes @@ -453,7 +454,6 @@ struct rdt_resource {int (*parse_ctrlval)(struct rdt_parse_data *data,struct rdt_resource *r,struct rdt_domain *d); -bool (*cbm_validate)(char *buf,u32 *data,struct rdt_resource *r);struct list_head evt_list;int num_rmid;unsigned int mon_scale;
arch/x86/kernel/cpu/resctrl/internal.h void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms); · line 598
Quoted 7 lines
arch/x86/kernel/cpu/resctrl/internal.h +0
-2@@ -594,7 +594,5 @@ void cqm_setup_limbo_handler(struct rdt_domain *dom, unsigned long delay_ms);void cqm_handle_limbo (struct work_struct *work);bool has_busy_rmid (struct rdt_resource *r,struct rdt_domain *d);void __check_limbo (struct rdt_domain *d,bool force_free); -bool cbm_validate_intel (char *buf,u32 *data,struct rdt_resource *r); -bool cbm_validate_amd (char *buf,u32 *data,struct rdt_resource *r);#endif /* _ASM_X86_RESCTRL_INTERNAL_H */
Just the two small comments from my side. For the rest:
Babu may want to take a look.
Reinette
James Morse
reviewerPATCH 10/10 cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
In reply to James Morseresctrl/core.c defines get_cache_id() for use in its cpu-hotplug callbacks. This gets the id attribute of the cache at the corresponding level of a cpu.
Later rework means this private function needs to be shared. Move it to the header file.
The name conflicts with a different definition in intel_cacheinfo.c, name it get_cpu_cacheinfo_id() to show its relation with get_cpu_cacheinfo().
Now this is visible on other architectures, check the id attribute has actually been set.
--- arch/x86/kernel/cpu/resctrl/core.c | 17 ++--------------- include/linux/cacheinfo.h | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 15 deletions(-)
arch/x86/kernel/cpu/resctrl/core.c +2 -15
@@ -349,19 +349,6 @@ static void rdt_get_cdp_l2_config(void)rdt_get_cdp_config (RDT_RESOURCE_L2 ,RDT_RESOURCE_L2CODE ); } -static int get_cache_id (int cpu,int level) -{ -struct cpu_cacheinfo *ci =get_cpu_cacheinfo (cpu); -int i; - -for (i =0 ; i < ci->num_leaves; i++) { -if (ci->info_list[i].level == level) -return ci->info_list[i].id; - } - -return -1 ; -} -static void mba_wrmsr_amd (struct rdt_domain *d,struct msr_param *m,struct rdt_resource *r) {
@@ -559,7 +546,7 @@ static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)*/ static void domain_add_cpu (int cpu,struct rdt_resource *r) { -int id =get_cache_id (cpu, r->cache_level); +int id =get_cpu_cacheinfo_id (cpu, r->cache_level);struct list_head *add_pos =NULL ;struct rdt_domain *d;
@@ -603,7 +590,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)static void domain_remove_cpu (int cpu,struct rdt_resource *r) { -int id =get_cache_id (cpu, r->cache_level); +int id =get_cpu_cacheinfo_id (cpu, r->cache_level);struct rdt_domain *d; d =rdt_find_domain (r, id,NULL );
include/linux/cacheinfo.h +18 -0
@@ -3,6 +3,7 @@#define _LINUX_CACHEINFO_H#include <linux/bitops.h> +#include <linux/cpu.h> #include <linux/cpumask.h> #include <linux/smp.h>
@@ -119,4 +120,21 @@ int acpi_find_last_cache_level(unsigned int cpu);const struct attribute_group *cache_get_priv_group (struct cacheinfo *this_leaf); +/* Get the id of a particular cache on @cpu. cpuhp lock must held. */ +static inline int get_cpu_cacheinfo_id (int cpu,int level) +{ +struct cpu_cacheinfo *ci =get_cpu_cacheinfo (cpu); +int i; + +for (i =0 ; i < ci->num_leaves; i++) { +if (ci->info_list[i].level == level){ +if (ci->info_list[i].attributes &CACHE_ID ) +return ci->info_list[i].id; +return -1 ; + } + } + +return -1 ; +} +#endif /* _LINUX_CACHEINFO_H */
Signature · 1 line
2.24.1
Reinette Chatre
maintainerRe: [PATCH 10/10] cacheinfo: Move resctrl's get_cache_id() to the cacheinfo header file
Hi James,
Quoted 75 lines · James Morse
resctrl/core.cdefinesget_cache_id()for use in its cpu-hotplug callbacks. This gets the id attribute of the cache at the corresponding level of a cpu.Later rework means this private function needs to be shared. Move it to the header file.
The name conflicts with a different definition in
intel_cacheinfo.c, name itget_cpu_cacheinfo_id()to show its relation withget_cpu_cacheinfo().Now this is visible on other architectures, check the id attribute has actually been set.
Signed-off-by James Morse <[email protected]>--- arch/x86/kernel/cpu/resctrl/core.c | 17 ++--------------- include/linux/cacheinfo.h | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 15 deletions(-)arch/x86/kernel/cpu/resctrl/core.c +2
-15@@ -349,19 +349,6 @@ static void rdt_get_cdp_l2_config(void)rdt_get_cdp_config (RDT_RESOURCE_L2 ,RDT_RESOURCE_L2CODE ); } -static int get_cache_id (int cpu,int level) -{ -struct cpu_cacheinfo *ci =get_cpu_cacheinfo (cpu); -int i; - -for (i =0 ; i < ci->num_leaves; i++) { -if (ci->info_list[i].level == level) -return ci->info_list[i].id; - } - -return -1 ; -} -static void mba_wrmsr_amd (struct rdt_domain *d,struct msr_param *m,struct rdt_resource *r) {@@ -559,7 +546,7 @@ static int domain_setup_mon_state(struct rdt_resource *r, struct rdt_domain *d)*/ static void domain_add_cpu (int cpu,struct rdt_resource *r) { -int id =get_cache_id (cpu, r->cache_level); +int id =get_cpu_cacheinfo_id (cpu, r->cache_level);struct list_head *add_pos =NULL ;struct rdt_domain *d;@@ -603,7 +590,7 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)static void domain_remove_cpu (int cpu,struct rdt_resource *r) { -int id =get_cache_id (cpu, r->cache_level); +int id =get_cpu_cacheinfo_id (cpu, r->cache_level);struct rdt_domain *d; d =rdt_find_domain (r, id,NULL );include/linux/cacheinfo.h +1
-0@@ -3,6 +3,7 @@#define _LINUX_CACHEINFO_H#include <linux/bitops.h> +#include <linux/cpu.h> #include <linux/cpumask.h> #include <linux/smp.h>
include/linux/cacheinfo.h int acpi_find_last_cache_level(unsigned int cpu); · line 123
Quoted 4 lines
include/linux/cacheinfo.h +1
-0@@ -119,4 +120,21 @@ int acpi_find_last_cache_level(unsigned int cpu);const struct attribute_group *cache_get_priv_group (struct cacheinfo *this_leaf); +/* Get the id of a particular cache on @cpu. cpuhp lock must held. */
Technically the cache is not _on_ @cpu. How about "Get the id of the cache associated with @cpu at level @level"?
Also, s/must held/must be held/
include/linux/cacheinfo.h int acpi_find_last_cache_level(unsigned int cpu); · line 130
Quoted 7 lines
include/linux/cacheinfo.h +7
-0+static inline int get_cpu_cacheinfo_id (int cpu,int level) +{ +struct cpu_cacheinfo *ci =get_cpu_cacheinfo (cpu); +int i; + +for (i =0 ; i < ci->num_leaves; i++) { +if (ci->info_list[i].level == level){
Typo here. Could you please insert a space before the open brace?
include/linux/cacheinfo.h int acpi_find_last_cache_level(unsigned int cpu); · line 140
Quoted 11 lines
include/linux/cacheinfo.h +9
-0+if (ci->info_list[i].attributes &CACHE_ID ) +return ci->info_list[i].id; + return -1; + } + } + +return -1 ; +} +#endif /* _LINUX_CACHEINFO_H */
The resctrl bits look good to me.
Thank you
Reinette