Add RISC-V 32 NOMMU support
Subsystems (2)
cover Add RISC-V 32 NOMMU support
This patch-set aims to add NOMMU support to RV32. Many people want to build simple emulators or HDL models of RISC-V this patch makes it posible to run linux on them.
Yimin Gu is the original author of this set. Submitted here:
https://lists.buildroot.org/pipermail/buildroot/2022-November/656134.html
Though Jesse T rewrote the Dconf.
The new set:
https://lists.buildroot.org/pipermail/buildroot/2022-December/658258.html
Jesse Taube (1):
riscv: configs: Add nommu decfconfig for RV32
Yimin Gu (1):
riscv: Kconfig: Allow RV32 to build with no MMU
arch/riscv/Kconfig | 5 ++--- arch/riscv/configs/rv32_nommu_virt_defconfig | 16 ++++++++++++++++ 2 files changed, 18 insertions(+), 3 deletions(-) create mode 100644 arch/riscv/configs/rv32_nommu_virt_defconfig
Signature · 1 line
2.39.0
PATCH 1/2 riscv: Kconfig: Allow RV32 to build with no MMU
From: Yimin Gu <[email protected]>
Some RISC-V 32bit ores do not have an MMU, and the kernel should be able to build for them. This patch enables the RV32 to be built with no MMU support.
--- arch/riscv/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
arch/riscv/Kconfig +2 -3
@@ -163,8 +163,8 @@ config MMU config PAGE_OFFSET hex - default 0xC0000000 if 32BIT - default 0x80000000 if 64BIT && !MMU + default 0xC0000000 if 32BIT && MMU + default 0x80000000 if !MMU default 0xff60000000000000 if 64BIT config KASAN_SHADOW_OFFSET
@@ -262,7 +262,6 @@ config ARCH_RV32I select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 select GENERIC_LIB_UCMPDI2 - select MMU config ARCH_RV64I bool "RV64I"
Signature · 7 lines
2.39.0 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
kernel test robot
build botRe: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Thank you for the patch! Yet something to improve:
Hi Jesse,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on linus/master]
[also build test ERROR on v6.2-rc4 next-20230120]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Jesse-Taube/riscv-Kconfig-Allow-RV32-to-build-with-no-MMU/20230119-132822 patch link: https://lore.kernel.org/r/20230119052642.1112171-2-Mr.Bossman075%40gmail.com patch subject: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU config: riscv-randconfig-c003-20230119 (https://download.01.org/0day-ci/archive/20230120/[email protected]/config) compiler: riscv32-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/4c6876d890ddeab1fb2cb42889027c6d1dbdd02f
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jesse-Taube/riscv-Kconfig-Allow-RV32-to-build-with-no-MMU/20230119-132822 git checkout 4c6876d890ddeab1fb2cb42889027c6d1dbdd02f
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=riscv olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>
All errors (new ones prefixed by >>):
riscv32-linux-ld: drivers/clk/clk-k210.o: in function `k210_pll_get_rate':
>> drivers/clk/clk-k210.c:498: undefined reference to `__udivdi3'
vim +498 drivers/clk/clk-k210.c
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 480
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 481 static unsigned long k210_pll_get_rate(struct clk_hw *hw,
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 482 unsigned long parent_rate)
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 483 {
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 484 struct k210_pll *pll = to_k210_pll(hw);
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 485 u32 reg = readl(pll->reg);
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 486 u32 r, f, od;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 487
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 488 if (reg & K210_PLL_BYPASS)
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 489 return parent_rate;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 490
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 491 if (!(reg & K210_PLL_PWRD))
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 492 return 0;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 493
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 494 r = FIELD_GET(K210_PLL_CLKR, reg) + 1;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 495 f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 496 od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 497 c6ca7616f7d5c2 Damien Le Moal 2021-02-10 @498 return (u64)parent_rate * f / (r * od);c6ca7616f7d5c2 Damien Le Moal 2021-02-10 499 }c6ca7616f7d5c2 Damien Le Moal 2021-02-10 500
Signature · 2 lines
0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
In reply to Jesse TaubeHello!
Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.
Quoted 3 lines · Jesse Taube
From: Yimin Gu <[email protected]>
Some RISC-V 32bit ores do not have an MMU, and the kernel should be
s/ores/cores
Quoted 6 lines
able to build for them. This patch enables the RV32 to be built with no MMU support.
Signed-off-by Yimin Gu <[email protected]>CC Jesse Taube <[email protected]>Tested-by Waldemar Brodkorb <[email protected]>
And the automation complains that this tag is not "Tested-by:"
Thanks,
Conor.
Quoted 32 lines
Signed-off-by Jesse Taube <[email protected]>--- arch/riscv/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)arch/riscv/Kconfig +2
-3@@ -163,8 +163,8 @@ config MMU config PAGE_OFFSET hex - default 0xC0000000 if 32BIT - default 0x80000000 if 64BIT && !MMU + default 0xC0000000 if 32BIT && MMU + default 0x80000000 if !MMU default 0xff60000000000000 if 64BIT config KASAN_SHADOW_OFFSET@@ -262,7 +262,6 @@ config ARCH_RV32I select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 select GENERIC_LIB_UCMPDI2 - select MMU config ARCH_RV64I bool "RV64I"Signature · 1 line
2.39.0
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Quoted 5 lines · Conor Dooley
Hello!
Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.
Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT. This should work.
arch/riscv/Kconfig.socs +1 -1
@@ -43,7 +43,7 @@ config SOC_VIRT config SOC_CANAAN bool "Canaan Kendryte K210 SoC" - depends on !MMU + depends on !MMU && 64BIT select CLINT_TIMER if RISCV_M_MODE select SERIAL_SIFIVE if TTY select SERIAL_SIFIVE_CONSOLE if TTY
Quoted 6 lines · Jesse Taube
Quoted 3 lines
From: Yimin Gu <[email protected]>
Some RISC-V 32bit ores do not have an MMU, and the kernel should be
s/ores/cores
OH thanks sorry for the spelling mistakes.
Thanks,
Jesse Taube
Quoted 44 lines
Quoted 6 lines
able to build for them. This patch enables the RV32 to be built with no MMU support.
Signed-off-by Yimin Gu <[email protected]>CC Jesse Taube <[email protected]>Tested-by Waldemar Brodkorb <[email protected]>And the automation complains that this tag is not "Tested-by:"
Thanks,
Conor.Quoted 32 lines
Signed-off-by Jesse Taube <[email protected]>--- arch/riscv/Kconfig | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)arch/riscv/Kconfig +2
-3@@ -163,8 +163,8 @@ config MMU config PAGE_OFFSET hex - default 0xC0000000 if 32BIT - default 0x80000000 if 64BIT && !MMU + default 0xC0000000 if 32BIT && MMU + default 0x80000000 if !MMU default 0xff60000000000000 if 64BIT config KASAN_SHADOW_OFFSET@@ -262,7 +262,6 @@ config ARCH_RV32I select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_LSHRDI3 select GENERIC_LIB_UCMPDI2 - select MMU config ARCH_RV64I bool "RV64I"Signature · 1 line
2.39.0
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Hey Jesse,
Quoted 5 lines · Jesse Taube
Quoted 3 lines · Conor Dooley
Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.
Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT.
LKP reported a build error for it:
https://lore.kernel.org/linux-riscv/[email protected]/
Quoted 6 lines
This should work.
arch/riscv/Kconfig.socs +0
-0
arch/riscv/Kconfig.socs config SOC_VIRT · line 49
Quoted 8 lines
arch/riscv/Kconfig.socs +1
-1@@ -43,7 +43,7 @@ config SOC_VIRT config SOC_CANAAN bool "Canaan Kendryte K210 SoC" - depends on !MMU + depends on !MMU && 64BIT select CLINT_TIMER if RISCV_M_MODE select SERIAL_SIFIVE if TTY select SERIAL_SIFIVE_CONSOLE if TTY
I don't think this is the correct fix for the problem - the drivers really should not do implicit 64-bit divisions IMO.
Linux has division helpers for them in math64.h.
None of the other SoCs have a dependency on 64BIT and I'd not been keen on adding on here.
I suspect the fix is as simple as the below, but I'd need to go test it.
Thanks,
Conor.
--- 8< ---
From ecfa79ad1b24f68cfccb77d666e443293d52d066 Mon Sep 17 00:00:00 2001
From: Conor Dooley <[email protected]>
Date: Fri, 20 Jan 2023 20:36:29 +0000
Subject: [PATCH] clk: k210: remove an implicit 64-bit division
The K210 clock driver depends on SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there.
Replace the implicit division with an explicit one.
---
Since it was always guarded such that it only ever built for 64-bit, I am not sure that a fixes tag is needed, but it would be:
--- drivers/clk/clk-k210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/clk-k210.c +1 -1
@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw, f =FIELD_GET (K210_PLL_CLKF , reg) +1 ; od =FIELD_GET (K210_PLL_CLKOD , reg) +1 ; -return (u64 )parent_rate * f / (r * od); +return div_u64 (parent_rate * f, r * od); }static const struct clk_ops k210_pll_ops = {
Signature · 1 line
2.39.0
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Quoted 65 lines · Conor Dooley
Quoted 5 lines · Jesse Taube
Quoted 3 lines · Conor Dooley
Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.
Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT.
LKP reported a build error for it:
https://lore.kernel.org/linux-riscv/[email protected]/Quoted 6 lines
This should work.
arch/riscv/Kconfig.socs +0
-0arch/riscv/Kconfig.socs config SOC_VIRT · line 49
Quoted 8 lines
arch/riscv/Kconfig.socs +1
-1@@ -43,7 +43,7 @@ config SOC_VIRT config SOC_CANAAN bool "Canaan Kendryte K210 SoC" - depends on !MMU + depends on !MMU && 64BIT select CLINT_TIMER if RISCV_M_MODE select SERIAL_SIFIVE if TTY select SERIAL_SIFIVE_CONSOLE if TTYI don't think this is the correct fix for the problem - the drivers really should not do implicit 64-bit divisions IMO.
Linux has division helpers for them inmath64.h.
None of the other SoCs have a dependency on 64BIT and I'd not been keen on adding on here.I suspect the fix is as simple as the below, but I'd need to go test it.
Thanks,
Conor.--- 8< ---
Fromecfa79ad1b24f68cfccb77d666e443293d52d066Mon Sep 17 00:00:00 2001
From: Conor Dooley <[email protected]>
Date: Fri, 20 Jan 2023 20:36:29 +0000
Subject: [PATCH] clk: k210: remove an implicit 64-bit divisionThe K210 clock driver depends on
SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there.Replace the implicit division with an explicit one.
Reported-by kernel test robot <[email protected]>Signed-off-by Conor Dooley <[email protected]>---
Since it was always guarded such that it only ever built for 64-bit, I am not sure that a fixes tag is needed, but it would be:Fixes c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")--- drivers/clk/clk-k210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/clk/clk-k210.c +0
-0
drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 498
Quoted 5 lines
drivers/clk/clk-k210.c +1
-1@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw, f =FIELD_GET (K210_PLL_CLKF , reg) +1 ; od =FIELD_GET (K210_PLL_CLKOD , reg) +1 ; -return (u64 )parent_rate * f / (r * od); +return div_u64 (parent_rate * f, r * od);
Nope, that's wrong. I omitted the cast...
return div_u64((u64)parent_rate * f, r * od);
Quoted 13 lines
drivers/clk/clk-k210.c +0
-0}static const struct clk_ops k210_pll_ops = {Signature · 9 lines
2.39.0 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Quoted 43 lines · Conor Dooley
Quoted 42 lines · Conor Dooley
Quoted 5 lines · Jesse Taube
Quoted 3 lines · Conor Dooley
Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.
Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT.
LKP reported a build error for it:
https://lore.kernel.org/linux-riscv/[email protected]/Quoted 6 lines
This should work.
arch/riscv/Kconfig.socs +0
-0arch/riscv/Kconfig.socs config SOC_VIRT · line 49
Quoted 8 lines
arch/riscv/Kconfig.socs +1
-1@@ -43,7 +43,7 @@ config SOC_VIRT config SOC_CANAAN bool "Canaan Kendryte K210 SoC" - depends on !MMU + depends on !MMU && 64BIT select CLINT_TIMER if RISCV_M_MODE select SERIAL_SIFIVE if TTY select SERIAL_SIFIVE_CONSOLE if TTYI don't think this is the correct fix for the problem - the drivers really should not do implicit 64-bit divisions IMO.
Linux has division helpers for them inmath64.h.
None of the other SoCs have a dependency on 64BIT and I'd not been keen on adding on here.I suspect the fix is as simple as the below, but I'd need to go test it.
Thanks,
Conor.--- 8< ---
Fromecfa79ad1b24f68cfccb77d666e443293d52d066Mon Sep 17 00:00:00 2001
From: Conor Dooley <[email protected]>
Date: Fri, 20 Jan 2023 20:36:29 +0000
Subject: [PATCH] clk: k210: remove an implicit 64-bit division
Quoted 4 lines
Quoted 4 lines
The K210 clock driver depends on
SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there.
Oh I missed the bots email oops.
undefined reference to `__udivdi3'
Poor linker isn't linking with libgcc
Quoted 22 lines
Quoted 22 lines
Replace the implicit division with an explicit one.
Reported-by kernel test robot <[email protected]>Signed-off-by Conor Dooley <[email protected]>---
Since it was always guarded such that it only ever built for 64-bit, I am not sure that a fixes tag is needed, but it would be:Fixes c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")--- drivers/clk/clk-k210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/clk/clk-k210.c +0
-0@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw, f =FIELD_GET (K210_PLL_CLKF , reg) +1 ; od =FIELD_GET (K210_PLL_CLKOD , reg) +1 ;
Quoted 6 lines
drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 498
Quoted 2 lines
drivers/clk/clk-k210.c +1
-1-return (u64 )parent_rate * f / (r * od); +return div_u64 (parent_rate * f, r * od);Nope, that's wrong. I omitted the cast...
return div_u64((u64)parent_rate * f, r * od);
Ah that's a much better fix, shall I prepend this to the set and author you?
Quoted 15 lines
Quoted 14 lines
drivers/clk/clk-k210.c +0
-0}static const struct clk_ops k210_pll_ops = {Signature · 9 lines
2.39.0 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Quoted 12 lines
Quoted 12 lines
drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 497
Quoted 9 lines
drivers/clk/clk-k210.c +1
-1@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw, f =FIELD_GET (K210_PLL_CLKF , reg) +1 ; od =FIELD_GET (K210_PLL_CLKOD , reg) +1 ; -return (u64 )parent_rate * f / (r * od); +return div_u64 (parent_rate * f, r * od);Nope, that's wrong. I omitted the cast...
Quoted 4 lines
Quoted 1 line
return div_u64((u64)parent_rate * f, r * od);Ah that's a much better fix, shall I prepend this to the set and author you?
Uh, I'd rather check that it is a functional fix first! I have the board, so I'll give it a go tomorrow and let you know.
Thanks,
Conor.
Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
Quoted 12 lines · Conor Dooley
Quoted 12 lines
Quoted 12 lines
drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 497
Quoted 9 lines
drivers/clk/clk-k210.c +1
-1@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw, f =FIELD_GET (K210_PLL_CLKF , reg) +1 ; od =FIELD_GET (K210_PLL_CLKOD , reg) +1 ; -return (u64 )parent_rate * f / (r * od); +return div_u64 (parent_rate * f, r * od);Nope, that's wrong. I omitted the cast...
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
return div_u64((u64)parent_rate * f, r * od);Ah that's a much better fix, shall I prepend this to the set and author you?
Uh, I'd rather check that it is a functional fix first! I have the board, so I'll give it a go tomorrow and let you know.
Gave it a go, board still works with revised version of this change in place.
Thanks,
Conor.
PATCH 2/2 riscv: configs: Add nommu decfconfig for RV32
In reply to Jesse Taube32bit risc-v can be configured to run without MMU. This patch adds an example configuration for RV32 nommu virtual machine.
--- arch/riscv/configs/rv32_nommu_virt_defconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 arch/riscv/configs/rv32_nommu_virt_defconfig
arch/riscv/configs/rv32_nommu_virt_defconfig new file +16 -0
@@ -0,0 +1,16 @@ +CONFIG_BLK_DEV_INITRD=y +# CONFIG_MMU is not set +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_SOC_VIRT=y +CONFIG_NONPORTABLE=y +CONFIG_ARCH_RV32I=y +CONFIG_BINFMT_FLAT=y +CONFIG_SLOB=y +CONFIG_VIRTIO_BLK=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT2_FS=y +CONFIG_PRINTK_TIME=y
Signature · 7 lines
2.39.0 _______________________________________________ linux-riscv mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-riscv
Re: [PATCH v1 2/2] riscv: configs: Add nommu decfconfig for RV32
Hey Jesse,
Same here w/ a single nit.
I'll leave judging whether supporting rv32 nommu is worthwhile to others!
Quoted 1 line · Jesse Taube
riscv: configs: Add nommu decfconfig for RV32
typo: defconfig
Thanks,
Conor.
Quoted 36 lines
32bit risc-v can be configured to run without MMU. This patch adds an example configuration for RV32 nommu virtual machine.
Signed-off-by Jesse Taube <[email protected]>Cc Yimin Gu <[email protected]>--- arch/riscv/configs/rv32_nommu_virt_defconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 arch/riscv/configs/rv32_nommu_virt_defconfigarch/riscv/configs/rv32_nommu_virt_defconfig new file +16
-0@@ -0,0 +1,16 @@ +CONFIG_BLK_DEV_INITRD=y +# CONFIG_MMU is not set +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_SOC_VIRT=y +CONFIG_NONPORTABLE=y +CONFIG_ARCH_RV32I=y +CONFIG_BINFMT_FLAT=y +CONFIG_SLOB=y +CONFIG_VIRTIO_BLK=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT2_FS=y +CONFIG_PRINTK_TIME=ySignature · 1 line
2.39.0