Skip to contentSkip to conversation

Add RISC-V 32 NOMMU support

PATCH Superseded Jesse Taube 4 participants 12 messages Jan 19, 2023 – Jan 21, 2023

Subsystems (2)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover Add RISC-V 32 NOMMU support

This patch-set aims to add NOMMU support to RV32. Many people want to build simple emulators or HDL models of RISC-V this patch makes it posible to run linux on them.

Yimin Gu is the original author of this set. Submitted here:
https://lists.buildroot.org/pipermail/buildroot/2022-November/656134.html

Though Jesse T rewrote the Dconf.

The new set:
https://lists.buildroot.org/pipermail/buildroot/2022-December/658258.html

Jesse Taube (1):
riscv: configs: Add nommu decfconfig for RV32

Yimin Gu (1):
riscv: Kconfig: Allow RV32 to build with no MMU

 arch/riscv/Kconfig                           |  5 ++---
 arch/riscv/configs/rv32_nommu_virt_defconfig | 16 ++++++++++++++++
 2 files changed, 18 insertions(+), 3 deletions(-)
 create mode 100644 arch/riscv/configs/rv32_nommu_virt_defconfig
Signature · 1 line
2.39.0
#1 lore raw

PATCH 1/2 riscv: Kconfig: Allow RV32 to build with no MMU

From: Yimin Gu <[email protected]>

Some RISC-V 32bit ores do not have an MMU, and the kernel should be able to build for them. This patch enables the RV32 to be built with no MMU support.

---
 arch/riscv/Kconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/riscv/Kconfig +2 -3
index 59d18881f35b..49759dbe6a8f 100644
@@ -163,8 +163,8 @@ config MMU
 
 config PAGE_OFFSET
 	hex
-	default 0xC0000000 if 32BIT
-	default 0x80000000 if 64BIT && !MMU
+	default 0xC0000000 if 32BIT && MMU
+	default 0x80000000 if !MMU
 	default 0xff60000000000000 if 64BIT
 
 config KASAN_SHADOW_OFFSET
@@ -262,7 +262,6 @@ config ARCH_RV32I
 	select GENERIC_LIB_ASHRDI3
 	select GENERIC_LIB_LSHRDI3
 	select GENERIC_LIB_UCMPDI2
-	select MMU
 
 config ARCH_RV64I
 	bool "RV64I"
Signature · 7 lines
2.39.0


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#2 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Thank you for the patch! Yet something to improve:

Hi Jesse,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v6.2-rc4 next-20230120]
[If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Jesse-Taube/riscv-Kconfig-Allow-RV32-to-build-with-no-MMU/20230119-132822
patch link:    https://lore.kernel.org/r/20230119052642.1112171-2-Mr.Bossman075%40gmail.com
patch subject: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU
config: riscv-randconfig-c003-20230119 (https://download.01.org/0day-ci/archive/20230120/[email protected]/config)
compiler: riscv32-linux-gcc (GCC) 12.1.0

reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/4c6876d890ddeab1fb2cb42889027c6d1dbdd02f
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Jesse-Taube/riscv-Kconfig-Allow-RV32-to-build-with-no-MMU/20230119-132822 git checkout 4c6876d890ddeab1fb2cb42889027c6d1dbdd02f
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=riscv olddefconfig COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=riscv SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable | Reported-by: kernel test robot <[email protected]>

All errors (new ones prefixed by >>):

riscv32-linux-ld: drivers/clk/clk-k210.o: in function `k210_pll_get_rate':

>> drivers/clk/clk-k210.c:498: undefined reference to `__udivdi3'

vim +498 drivers/clk/clk-k210.c

c6ca7616f7d5c2 Damien Le Moal 2021-02-10  480  
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  481  static unsigned long k210_pll_get_rate(struct clk_hw *hw,
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  482  				       unsigned long parent_rate)
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  483  {
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  484  	struct k210_pll *pll = to_k210_pll(hw);
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  485  	u32 reg = readl(pll->reg);
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  486  	u32 r, f, od;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  487  
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  488  	if (reg & K210_PLL_BYPASS)
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  489  		return parent_rate;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  490  
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  491  	if (!(reg & K210_PLL_PWRD))
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  492  		return 0;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  493  
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  494  	r = FIELD_GET(K210_PLL_CLKR, reg) + 1;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  495  	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  496  	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
c6ca7616f7d5c2 Damien Le Moal 2021-02-10  497  

c6ca7616f7d5c2 Damien Le Moal 2021-02-10 @498 return (u64)parent_rate * f / (r * od);
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 499 }
c6ca7616f7d5c2 Damien Le Moal 2021-02-10 500

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests
#3 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

In reply to Jesse Taube

Hello!

Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.

Quoted 3 lines · Jesse Taube

From: Yimin Gu <[email protected]>

Some RISC-V 32bit ores do not have an MMU, and the kernel should be

s/ores/cores

Quoted 6 lines

able to build for them. This patch enables the RV32 to be built with no MMU support.

And the automation complains that this tag is not "Tested-by:"

Thanks,
Conor.

Quoted 32 lines
---
 arch/riscv/Kconfig | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
arch/riscv/Kconfig +2 -3
index 59d18881f35b..49759dbe6a8f 100644
@@ -163,8 +163,8 @@ config MMU
 
 config PAGE_OFFSET
 	hex
-	default 0xC0000000 if 32BIT
-	default 0x80000000 if 64BIT && !MMU
+	default 0xC0000000 if 32BIT && MMU
+	default 0x80000000 if !MMU
 	default 0xff60000000000000 if 64BIT
 
 config KASAN_SHADOW_OFFSET
@@ -262,7 +262,6 @@ config ARCH_RV32I
 	select GENERIC_LIB_ASHRDI3
 	select GENERIC_LIB_LSHRDI3
 	select GENERIC_LIB_UCMPDI2
-	select MMU
 
 config ARCH_RV64I
 	bool "RV64I"
Signature · 1 line
2.39.0
#4 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Quoted 5 lines · Conor Dooley

Hello!

Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.

Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT. This should work.

arch/riscv/Kconfig.socs +1 -1
index 69774bb362d6..b9835b8ede86 100644
@@ -43,7 +43,7 @@ config SOC_VIRT
 
 config SOC_CANAAN
        bool "Canaan Kendryte K210 SoC"
-       depends on !MMU
+       depends on !MMU && 64BIT
        select CLINT_TIMER if RISCV_M_MODE
        select SERIAL_SIFIVE if TTY
        select SERIAL_SIFIVE_CONSOLE if TTY
Quoted 6 lines · Jesse Taube
Quoted 3 lines

From: Yimin Gu <[email protected]>

Some RISC-V 32bit ores do not have an MMU, and the kernel should be

s/ores/cores

OH thanks sorry for the spelling mistakes.

Thanks,
Jesse Taube

Quoted 44 lines
Quoted 6 lines

able to build for them. This patch enables the RV32 to be built with no MMU support.

And the automation complains that this tag is not "Tested-by:"

Thanks,
Conor.

Quoted 32 lines
---
  arch/riscv/Kconfig | 5 ++---
  1 file changed, 2 insertions(+), 3 deletions(-)
arch/riscv/Kconfig +2 -3
index 59d18881f35b..49759dbe6a8f 100644
@@ -163,8 +163,8 @@ config MMU
 
  config PAGE_OFFSET
  	hex
-	default 0xC0000000 if 32BIT
-	default 0x80000000 if 64BIT && !MMU
+	default 0xC0000000 if 32BIT && MMU
+	default 0x80000000 if !MMU
  	default 0xff60000000000000 if 64BIT
 
  config KASAN_SHADOW_OFFSET
@@ -262,7 +262,6 @@ config ARCH_RV32I
  	select GENERIC_LIB_ASHRDI3
  	select GENERIC_LIB_LSHRDI3
  	select GENERIC_LIB_UCMPDI2
-	select MMU
 
  config ARCH_RV64I
  	bool "RV64I"
Signature · 1 line
2.39.0
#5 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Hey Jesse,

Quoted 5 lines · Jesse Taube
Quoted 3 lines · Conor Dooley

Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.

Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT.

LKP reported a build error for it:
https://lore.kernel.org/linux-riscv/[email protected]/

Quoted 6 lines

This should work.

arch/riscv/Kconfig.socs +0 -0
index 69774bb362d6..b9835b8ede86 100644

arch/riscv/Kconfig.socs config SOC_VIRT · line 49

Quoted 8 lines
arch/riscv/Kconfig.socs +1 -1
@@ -43,7 +43,7 @@ config SOC_VIRT
 
 config SOC_CANAAN
        bool "Canaan Kendryte K210 SoC"
-       depends on !MMU
+       depends on !MMU && 64BIT
        select CLINT_TIMER if RISCV_M_MODE
        select SERIAL_SIFIVE if TTY
        select SERIAL_SIFIVE_CONSOLE if TTY

I don't think this is the correct fix for the problem - the drivers really should not do implicit 64-bit divisions IMO.
Linux has division helpers for them in math64.h.
None of the other SoCs have a dependency on 64BIT and I'd not been keen on adding on here.

I suspect the fix is as simple as the below, but I'd need to go test it.

Thanks,
Conor.

--- 8< ---
From ecfa79ad1b24f68cfccb77d666e443293d52d066 Mon Sep 17 00:00:00 2001
From: Conor Dooley <[email protected]>
Date: Fri, 20 Jan 2023 20:36:29 +0000
Subject: [PATCH] clk: k210: remove an implicit 64-bit division

The K210 clock driver depends on SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there.

Replace the implicit division with an explicit one.

---
Since it was always guarded such that it only ever built for 64-bit, I am not sure that a fixes tag is needed, but it would be:

Fixes c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")
---
 drivers/clk/clk-k210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/clk-k210.c +1 -1
index 67a7cb3503c3..17c5bfb384ad 100644
@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw,
 	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
 	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
 
-	return (u64)parent_rate * f / (r * od);
+	return div_u64(parent_rate * f, r * od);
 }
 
 static const struct clk_ops k210_pll_ops = {
Signature · 1 line
2.39.0
#6 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Quoted 65 lines · Conor Dooley
Quoted 5 lines · Jesse Taube
Quoted 3 lines · Conor Dooley

Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.

Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT.

LKP reported a build error for it:
https://lore.kernel.org/linux-riscv/[email protected]/

Quoted 6 lines

This should work.

arch/riscv/Kconfig.socs +0 -0
index 69774bb362d6..b9835b8ede86 100644

arch/riscv/Kconfig.socs config SOC_VIRT · line 49

Quoted 8 lines
arch/riscv/Kconfig.socs +1 -1
@@ -43,7 +43,7 @@ config SOC_VIRT
 
 config SOC_CANAAN
        bool "Canaan Kendryte K210 SoC"
-       depends on !MMU
+       depends on !MMU && 64BIT
        select CLINT_TIMER if RISCV_M_MODE
        select SERIAL_SIFIVE if TTY
        select SERIAL_SIFIVE_CONSOLE if TTY

I don't think this is the correct fix for the problem - the drivers really should not do implicit 64-bit divisions IMO.
Linux has division helpers for them in math64.h.
None of the other SoCs have a dependency on 64BIT and I'd not been keen on adding on here.

I suspect the fix is as simple as the below, but I'd need to go test it.

Thanks,
Conor.

--- 8< ---
From ecfa79ad1b24f68cfccb77d666e443293d52d066 Mon Sep 17 00:00:00 2001
From: Conor Dooley <[email protected]>
Date: Fri, 20 Jan 2023 20:36:29 +0000
Subject: [PATCH] clk: k210: remove an implicit 64-bit division

The K210 clock driver depends on SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there.

Replace the implicit division with an explicit one.

---
Since it was always guarded such that it only ever built for 64-bit, I am not sure that a fixes tag is needed, but it would be:

Fixes c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")
---
 drivers/clk/clk-k210.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/clk-k210.c +0 -0
index 67a7cb3503c3..17c5bfb384ad 100644

drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 498

Quoted 5 lines
drivers/clk/clk-k210.c +1 -1
@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw,
 	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
 	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
 
-	return (u64)parent_rate * f / (r * od);
+	return div_u64(parent_rate * f, r * od);

Nope, that's wrong. I omitted the cast...

	return div_u64((u64)parent_rate * f, r * od);
Quoted 13 lines
drivers/clk/clk-k210.c +0 -0
 }
 
 static const struct clk_ops k210_pll_ops = {
Signature · 9 lines
2.39.0




_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#7 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Quoted 43 lines · Conor Dooley
Quoted 42 lines · Conor Dooley
Quoted 5 lines · Jesse Taube
Quoted 3 lines · Conor Dooley

Since you'll have to re-submit, making sure that allowing !MMU on rv32 doesn't break the build due to canaan k210 drivers being enabled despite relying on 64-bit divisions, I've got some nits for you.

Not sure what driver needs 64bit, but sense !MMU was only selected by 64BIT.

LKP reported a build error for it:
https://lore.kernel.org/linux-riscv/[email protected]/

Quoted 6 lines

This should work.

arch/riscv/Kconfig.socs +0 -0
index 69774bb362d6..b9835b8ede86 100644

arch/riscv/Kconfig.socs config SOC_VIRT · line 49

Quoted 8 lines
arch/riscv/Kconfig.socs +1 -1
@@ -43,7 +43,7 @@ config SOC_VIRT
 
  config SOC_CANAAN
         bool "Canaan Kendryte K210 SoC"
-       depends on !MMU
+       depends on !MMU && 64BIT
         select CLINT_TIMER if RISCV_M_MODE
         select SERIAL_SIFIVE if TTY
         select SERIAL_SIFIVE_CONSOLE if TTY

I don't think this is the correct fix for the problem - the drivers really should not do implicit 64-bit divisions IMO.
Linux has division helpers for them in math64.h.
None of the other SoCs have a dependency on 64BIT and I'd not been keen on adding on here.

I suspect the fix is as simple as the below, but I'd need to go test it.

Thanks,
Conor.

--- 8< ---
From ecfa79ad1b24f68cfccb77d666e443293d52d066 Mon Sep 17 00:00:00 2001
From: Conor Dooley <[email protected]>
Date: Fri, 20 Jan 2023 20:36:29 +0000
Subject: [PATCH] clk: k210: remove an implicit 64-bit division

Quoted 4 lines
Quoted 4 lines

The K210 clock driver depends on SOC_CANAAN, which is only selectable when !MMU on RISC-V. !MMU is not possible on 32-bit yet, but patches have been sent for its enabling. The kernel test robot reported this implicit 64-bit division there.

Oh I missed the bots email oops.

undefined reference to `__udivdi3'
Poor linker isn't linking with libgcc

Quoted 22 lines
Quoted 22 lines

Replace the implicit division with an explicit one.

---
Since it was always guarded such that it only ever built for 64-bit, I am not sure that a fixes tag is needed, but it would be:

Fixes c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")
---
  drivers/clk/clk-k210.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/clk-k210.c +0 -0
index 67a7cb3503c3..17c5bfb384ad 100644
@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw,
  	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
  	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
 
Quoted 6 lines

drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 498

Quoted 2 lines
drivers/clk/clk-k210.c +1 -1
-	return (u64)parent_rate * f / (r * od);
+	return div_u64(parent_rate * f, r * od);

Nope, that's wrong. I omitted the cast...

	return div_u64((u64)parent_rate * f, r * od);

Ah that's a much better fix, shall I prepend this to the set and author you?

Quoted 15 lines
Quoted 14 lines
drivers/clk/clk-k210.c +0 -0
  }
 
  static const struct clk_ops k210_pll_ops = {
Signature · 9 lines
2.39.0




_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#8 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Quoted 12 lines
Quoted 12 lines

drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 497

Quoted 9 lines
drivers/clk/clk-k210.c +1 -1
index 67a7cb3503c3..17c5bfb384ad 100644
@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw,
  	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
  	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
-	return (u64)parent_rate * f / (r * od);
+	return div_u64(parent_rate * f, r * od);

Nope, that's wrong. I omitted the cast...

Quoted 4 lines
Quoted 1 line
	return div_u64((u64)parent_rate * f, r * od);

Ah that's a much better fix, shall I prepend this to the set and author you?

Uh, I'd rather check that it is a functional fix first! I have the board, so I'll give it a go tomorrow and let you know.

Thanks,
Conor.

#9 lore raw

Re: [PATCH v1 1/2] riscv: Kconfig: Allow RV32 to build with no MMU

Quoted 12 lines · Conor Dooley
Quoted 12 lines
Quoted 12 lines

drivers/clk/clk-k210.c static unsigned long k210_pll_get_rate(struct clk_hw *hw, · line 497

Quoted 9 lines
drivers/clk/clk-k210.c +1 -1
index 67a7cb3503c3..17c5bfb384ad 100644
@@ -495,7 +495,7 @@ static unsigned long k210_pll_get_rate(struct clk_hw *hw,
  	f = FIELD_GET(K210_PLL_CLKF, reg) + 1;
  	od = FIELD_GET(K210_PLL_CLKOD, reg) + 1;
-	return (u64)parent_rate * f / (r * od);
+	return div_u64(parent_rate * f, r * od);

Nope, that's wrong. I omitted the cast...

Quoted 7 lines
Quoted 4 lines
Quoted 1 line
	return div_u64((u64)parent_rate * f, r * od);

Ah that's a much better fix, shall I prepend this to the set and author you?

Uh, I'd rather check that it is a functional fix first! I have the board, so I'll give it a go tomorrow and let you know.

Gave it a go, board still works with revised version of this change in place.

Thanks,
Conor.

#10 lore raw

PATCH 2/2 riscv: configs: Add nommu decfconfig for RV32

In reply to Jesse Taube

32bit risc-v can be configured to run without MMU. This patch adds an example configuration for RV32 nommu virtual machine.

---
 arch/riscv/configs/rv32_nommu_virt_defconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 arch/riscv/configs/rv32_nommu_virt_defconfig
arch/riscv/configs/rv32_nommu_virt_defconfig new file +16 -0
new file mode 100644
index 000000000000..460907253a80
@@ -0,0 +1,16 @@
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_MMU is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_SOC_VIRT=y
+CONFIG_NONPORTABLE=y
+CONFIG_ARCH_RV32I=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_SLOB=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT2_FS=y
+CONFIG_PRINTK_TIME=y
Signature · 7 lines
2.39.0


_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv
#11 lore raw

Re: [PATCH v1 2/2] riscv: configs: Add nommu decfconfig for RV32

Hey Jesse,

Same here w/ a single nit.
I'll leave judging whether supporting rv32 nommu is worthwhile to others!

Quoted 1 line · Jesse Taube

riscv: configs: Add nommu decfconfig for RV32

typo: defconfig

Thanks,
Conor.

Quoted 36 lines

32bit risc-v can be configured to run without MMU. This patch adds an example configuration for RV32 nommu virtual machine.

---
 arch/riscv/configs/rv32_nommu_virt_defconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 create mode 100644 arch/riscv/configs/rv32_nommu_virt_defconfig
arch/riscv/configs/rv32_nommu_virt_defconfig new file +16 -0
new file mode 100644
index 000000000000..460907253a80
@@ -0,0 +1,16 @@
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_MMU is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_SOC_VIRT=y
+CONFIG_NONPORTABLE=y
+CONFIG_ARCH_RV32I=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_SLOB=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_EXT2_FS=y
+CONFIG_PRINTK_TIME=y
Signature · 1 line
2.39.0