status of NCR5380-based ISA drivers
Hi all,
you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?
NCR5380-based ISA drivers make up a significant part of those drivers still using scsi_module.c after it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.
The drivers in question are: dtc, g_NCR5380, pas16 and t128.
Thanks,
Christoph
Quoted 5 lines · On Sunday 11 September 2016 19:12:49 Christoph Hellwig wrote:
Hi all,
you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?
Quoted 8 lines
NCR5380-based ISA drivers make up a significant part of those drivers still using
scsi_module.cafter it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.The drivers in question are: dtc,
g_NCR5380, pas16 and t128.Thanks,
Christoph
I have the HW to test g_NCR5380 - it currently works fine as it did never before.
I started a patch to for scsi_module.c removal (and other good things) but haven't had time to finish it. Hopefully, it will be ready soon.
Signature · 1 line
Ondrej Zary
dtc, pas16 and t128 removal, was Re: status of NCR5380-based ISA drivers
In reply to Christoph HellwigQuoted 4 lines · Christoph Hellwig
Hi all,
you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?
I test the dmx3191d and mac_scsi drivers.
Quoted 6 lines
NCR5380-based ISA drivers make up a significant part of those drivers still using
scsi_module.cafter it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.The drivers in question are: dtc,
g_NCR5380, pas16 and t128.
I don't have any hardware with an ISA slot so I take a best-effort approach to maintaining those drivers.
I have not heard of anyone actually using dtc, pas16 or t128 so I don't mind seeing them removed (along with Documentation/scsi/dtc3x80.txt).
BTW, DTC3x80 support (NCR 53C406 chip I believe) should be easy to do in g_NCR5380, which already supports the DTC3181E card.
Quoted 3 lines
Thanks,
Christoph
Re: dtc, pas16 and t128 removal, was Re: status of NCR5380-based ISA drivers
Quoted 4 lines · On Mon, 12 Sep 2016, I wrote:
BTW, DTC3x80 support (NCR 53C406 chip I believe) should be easy to do in
g_NCR5380, which already supports the DTC3181E card.
Sorry, I should have written DTC406 chip, which is "supposedly compatible with the NCR 53C400" but is nothing like a NCR 53C406.
Christoph,
I test the atari_scsi front end - haven't got any ISA cards handy. Probably no ISA slots on my PC main board either ...
Cheers,
Michael
Am 12.09.2016 um 05:12 schrieb Christoph Hellwig:
Quoted 14 lines
Hi all,
you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?
NCR5380-based ISA drivers make up a significant part of those drivers still using
scsi_module.cafter it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.The drivers in question are: dtc,
g_NCR5380, pas16 and t128.Thanks,
Christoph