Skip to contentSkip to conversation

status of NCR5380-based ISA drivers

DISCUSSION Christoph Hellwig 4 participants 5 messages Sep 11, 2016 – Sep 12, 2016 SCSI

lore
Share & tools
lore
#0 lore raw

Hi all,

you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?

NCR5380-based ISA drivers make up a significant part of those drivers still using scsi_module.c after it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.

The drivers in question are: dtc, g_NCR5380, pas16 and t128.

Thanks,
Christoph

#1 lore raw
Quoted 5 lines · On Sunday 11 September 2016 19:12:49 Christoph Hellwig wrote:

Hi all,

you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?

Quoted 8 lines

NCR5380-based ISA drivers make up a significant part of those drivers still using scsi_module.c after it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.

The drivers in question are: dtc, g_NCR5380, pas16 and t128.

Thanks,
Christoph

I have the HW to test g_NCR5380 - it currently works fine as it did never before.
I started a patch to for scsi_module.c removal (and other good things) but haven't had time to finish it. Hopefully, it will be ready soon.

Signature · 1 line
Ondrej Zary
#2 lore raw

dtc, pas16 and t128 removal, was Re: status of NCR5380-based ISA drivers

In reply to Christoph Hellwig
Quoted 4 lines · Christoph Hellwig

Hi all,

you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?

I test the dmx3191d and mac_scsi drivers.

Quoted 6 lines

NCR5380-based ISA drivers make up a significant part of those drivers still using scsi_module.c after it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.

The drivers in question are: dtc, g_NCR5380, pas16 and t128.

I don't have any hardware with an ISA slot so I take a best-effort approach to maintaining those drivers.

I have not heard of anyone actually using dtc, pas16 or t128 so I don't mind seeing them removed (along with Documentation/scsi/dtc3x80.txt).

BTW, DTC3x80 support (NCR 53C406 chip I believe) should be easy to do in g_NCR5380, which already supports the DTC3181E card.

Quoted 3 lines

Thanks,
Christoph

#3 lore raw

Re: dtc, pas16 and t128 removal, was Re: status of NCR5380-based ISA drivers

Quoted 4 lines · On Mon, 12 Sep 2016, I wrote:

BTW, DTC3x80 support (NCR 53C406 chip I believe) should be easy to do in g_NCR5380, which already supports the DTC3181E card.

Sorry, I should have written DTC406 chip, which is "supposedly compatible with the NCR 53C400" but is nothing like a NCR 53C406.

#4 lore raw
In reply to Christoph Hellwig

Christoph,

I test the atari_scsi front end - haven't got any ISA cards handy. Probably no ISA slots on my PC main board either ...

Cheers,

Michael

Am 12.09.2016 um 05:12 schrieb Christoph Hellwig:

Quoted 14 lines

Hi all,

you seem to the currently active NCR580 cabal. Which frontends to NCR5380 do you test at the moment, or could you test?

NCR5380-based ISA drivers make up a significant part of those drivers still using scsi_module.c after it's 15 year deprecation period, and I'd like to either move them to this century or to the dust bin.

The drivers in question are: dtc, g_NCR5380, pas16 and t128.

Thanks,
Christoph