btrfs: Misc test fixes for large block/node sizes
v3 cover btrfs: Misc test fixes for large block/node sizes
Some of the btrfs and generic tests are written with 4k block/node size in mind. This patch fixes some of those tests to be compatible with other block/node sizes too. We caught these bugs while running the auto group tests on btrfs with large block/node sizes.
[v2] -> v3
1. Added RBs by Qu Wenruo in btrfs/{301, 137}
2. Updated the commit message of generic/563 with a more detailed explanation by Qu Wenrou.
3. Reverted by block size from 64k to 4k while filling the filesystem with dd for test generic/274.
[v1] -> [v2]:
1. Removed the patch for btrfs/200 of [v1] - need more analysis on this.
2. Removed the first 2 patches of [v1] which introduced 2 new helper functions
3. btrfs/{137,301} and generic/274 - Instead of scaling the test dynamically based on the underlying disk block size, I have hardcoded the pwrite blocksizes and offsets to 64k which is aligned to all underlying fs block sizes <= 64.
4. For generic/563 - Doubled the iosize instead of btrfs specific hack to cover for btrfs write ranges.
5. Updated the commit messages
[v1] - https://lore.kernel.org/all/[email protected]/
[v2] - https://lore.kernel.org/all/[email protected]/
Nirjhar Roy (IBM) (4):
btrfs/301: Make the test compatible with all the supported block sizes generic/274: Make the pwrite block sizes and offsets to 64k btrfs/137: Make this test compatible with all supported block sizes generic/563: Increase the iosize to to cover for btrfs
tests/btrfs/137 | 11 ++++---- tests/btrfs/137.out | 66 ++++++++++++++++++++++----------------------- tests/btrfs/301 | 2 +- tests/generic/274 | 8 +++--- tests/generic/563 | 2 +- 5 files changed, 45 insertions(+), 44 deletions(-)
--
2.34.1
PATCH v3 1/4 btrfs/301: Make the test compatible with all the supported block sizes
With large block sizes like 64k the test failed with the following logs:
QA output created by 301
basic accounting
+subvol 256 mismatched usage 33947648 vs 4587520 (expected data 4194304 expected meta 393216 diff 29360128)
+subvol 256 mismatched usage 168165376 vs 138805248 (expected data 138412032 expected meta 393216 diff 29360128)
+subvol 256 mismatched usage 33947648 vs 4587520 (expected data 4194304 expected meta 393216 diff 29360128)
+subvol 256 mismatched usage 33947648 vs 4587520 (expected data 4194304 expected meta 393216 diff 29360128)
fallocate: Disk quota exceededThe test creates nr_fill files each of size 8k. Now with 64k block size, 8k sized files occupy more than the expected sizes (i.e, 8k) due to internal fragmentation, since 1 file will occupy at least 1 fsblock. Fix this by making the file size 64k, which is aligned with all the supported block sizes.
--- tests/btrfs/301 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/btrfs/301 +1 -1
@@ -23,7 +23,7 @@ subv=$SCRATCH_MNT/subv nested=$SCRATCH_MNT/subv/nested snap=$SCRATCH_MNT/snap nr_fill=512 -fill_sz=$((8 * 1024)) +fill_sz=$((64 * 1024)) total_fill=$(($nr_fill * $fill_sz)) nodesize=$($BTRFS_UTIL_PROG inspect-internal dump-super $SCRATCH_DEV | \ grep nodesize | $AWK_PROG '{print $2}')
Signature · 1 line
2.34.1
Re: [PATCH v3 1/4] btrfs/301: Make the test compatible with all the supported block sizes
Quoted 17 lines · Nirjhar Roy (IBM)
With large block sizes like 64k the test failed with the following logs:
QA output created by 301 basic accounting +subvol 256 mismatched usage 33947648 vs 4587520 (expected data 4194304 expected meta 393216 diff 29360128) +subvol 256 mismatched usage 168165376 vs 138805248 (expected data 138412032 expected meta 393216 diff 29360128) +subvol 256 mismatched usage 33947648 vs 4587520 (expected data 4194304 expected meta 393216 diff 29360128) +subvol 256 mismatched usage 33947648 vs 4587520 (expected data 4194304 expected meta 393216 diff 29360128) fallocate: Disk quota exceededThe test creates
nr_fillfiles each of size 8k. Now with 64k block size, 8k sized files occupy more than the expected sizes (i.e, 8k) due to internal fragmentation, since 1 file will occupy at least 1 fsblock. Fix this by making the file size 64k, which is aligned with all the supported block sizes.
Quoted 3 lines
Reviewed-by Qu Wenruo <[email protected]>Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>
I tested it on Power, and the btrfs/301 test passes with both 4k & 64k block sizes.
SECTION -- btrfs_64k RECREATING -- btrfs on /dev/loop0 FSTYP -- btrfs PLATFORM -- Linux/ppc64le localhost 6.17.0-rc2-00060-g068a56e56fa8 #3 SMP Thu Aug 21 17:54:04 IST 2025 MKFS_OPTIONS -- -f -s 65536 -n 65536 /dev/loop1
MOUNT_OPTIONS -- /dev/loop1 /mnt/scratch
btrfs/301 67s ... 111s
Ran: btrfs/301
Passed all 1 tests
Quoted 17 lines
--- tests/btrfs/301 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tests/btrfs/301 +1
-1@@ -23,7 +23,7 @@ subv=$SCRATCH_MNT/subv nested=$SCRATCH_MNT/subv/nested snap=$SCRATCH_MNT/snap nr_fill=512 -fill_sz=$((8 * 1024)) +fill_sz=$((64 * 1024)) total_fill=$(($nr_fill * $fill_sz)) nodesize=$($BTRFS_UTIL_PROG inspect-internal dump-super $SCRATCH_DEV | \ grep nodesize | $AWK_PROG '{print $2}')
PATCH v3 2/4 generic/274: Make the pwrite block sizes and offsets to 64k
In reply to Nirjhar Roy (IBM)This test was written with 4k block size in mind and it fails with 64k block size when tested with btrfs.
The test first does pre-allocation, then fills up the filesystem. After that it tries to fragment and fill holes at offsets of 4k(i.e, 1 fsblock) - which works fine with 4k block size, but with 64k block size, the test tries to fragment and fill holes within 1 fsblock(of size 64k). This results in overwrite of 64k fsblocks and the write fails. The reason for this failure is that during overwrite, there is no more space available for COW.
Fix this by changing the pwrite block size and offsets to 64k so that the test never tries to punch holes or overwrite within 1 fsblock and the test becomes compatible with all block sizes.
For non-COW filesystems/files, this test should work even if the underlying filesytem block size > 64k.
--- tests/generic/274 | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
tests/generic/274 +4 -4
@@ -40,8 +40,8 @@ _scratch_unmount 2>/dev/null _scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1 _scratch_mount -# Create a 4k file and Allocate 4M past EOF on that file -$XFS_IO_PROG -f -c "pwrite 0 4k" -c "falloc -k 4k 4m" $SCRATCH_MNT/test \ +# Create a 64k file and Allocate 64M past EOF on that file +$XFS_IO_PROG -f -c "pwrite 0 64k" -c "falloc -k 64k 64m" $SCRATCH_MNT/test \ >>$seqres.full 2>&1 || _fail "failed to create test file" # Fill the rest of the fs completely
@@ -63,7 +63,7 @@ df $SCRATCH_MNT >>$seqres.full 2>&1 echo "Fill in prealloc space; fragment at offsets:" >> $seqres.full for i in `seq 1 2 1023`; do echo -n "$i " >> $seqres.full - dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \ + dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \ >>$seqres.full 2>/dev/null || _fail "failed to write to test file" done _scratch_sync
@@ -71,7 +71,7 @@ echo >> $seqres.full echo "Fill in prealloc space; fill holes at offsets:" >> $seqres.full for i in `seq 2 2 1023`; do echo -n "$i " >> $seqres.full - dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \ + dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \ >>$seqres.full 2>/dev/null || _fail "failed to fill test file" done _scratch_sync
Signature · 1 line
2.34.1
Re: [PATCH v3 2/4] generic/274: Make the pwrite block sizes and offsets to 64k
Quoted 13 lines · Nirjhar Roy (IBM)
This test was written with 4k block size in mind and it fails with 64k block size when tested with btrfs.
The test first does pre-allocation, then fills up the filesystem. After that it tries to fragment and fill holes at offsets of 4k(i.e, 1 fsblock) - which works fine with 4k block size, but with 64k block size, the test tries to fragment and fill holes within 1 fsblock(of size 64k). This results in overwrite of 64k fsblocks and the write fails. The reason for this failure is that during overwrite, there is no more space available for COW.
Fix this by changing the pwrite block size and offsets to 64k so that the test never tries to punch holes or overwrite within 1 fsblock and the test becomes compatible with all block sizes.
Quoted 5 lines
For non-COW filesystems/files, this test should work even if the underlying filesytem block size > 64k.
Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>
I tested it on Power, and the generic/274 test passes with both 4k & 64k block sizes.
SECTION -- btrfs_64k RECREATING -- btrfs on /dev/loop0 FSTYP -- btrfs PLATFORM -- Linux/ppc64le localhost 6.17.0-rc2-00060-g068a56e56fa8 #3 SMP Thu Aug 21 17:54:04 IST 2025 MKFS_OPTIONS -- -f -s 65536 -n 65536 /dev/loop1
MOUNT_OPTIONS -- /dev/loop1 /mnt/scratch
generic/274 53s ... 57s
Ran: generic/274
Passed all 1 tests
Quoted 37 lines
--- tests/generic/274 | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)tests/generic/274 +4
-4@@ -40,8 +40,8 @@ _scratch_unmount 2>/dev/null _scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1 _scratch_mount -# Create a 4k file and Allocate 4M past EOF on that file -$XFS_IO_PROG -f -c "pwrite 0 4k" -c "falloc -k 4k 4m" $SCRATCH_MNT/test \ +# Create a 64k file and Allocate 64M past EOF on that file +$XFS_IO_PROG -f -c "pwrite 0 64k" -c "falloc -k 64k 64m" $SCRATCH_MNT/test \ >>$seqres.full 2>&1 || _fail "failed to create test file" # Fill the rest of the fs completely@@ -63,7 +63,7 @@ df $SCRATCH_MNT >>$seqres.full 2>&1 echo "Fill in prealloc space; fragment at offsets:" >> $seqres.full for i in `seq 1 2 1023`; do echo -n "$i " >> $seqres.full - dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \ + dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \ >>$seqres.full 2>/dev/null || _fail "failed to write to test file" done _scratch_sync@@ -71,7 +71,7 @@ echo >> $seqres.full echo "Fill in prealloc space; fill holes at offsets:" >> $seqres.full for i in `seq 2 2 1023`; do echo -n "$i " >> $seqres.full - dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \ + dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \ >>$seqres.full 2>/dev/null || _fail "failed to fill test file" done _scratch_sync
Re: [PATCH v3 2/4] generic/274: Make the pwrite block sizes and offsets to 64k
In reply to Nirjhar Roy (IBM)Quoted 13 lines · Nirjhar Roy (IBM)
This test was written with 4k block size in mind and it fails with 64k block size when tested with btrfs.
The test first does pre-allocation, then fills up the filesystem. After that it tries to fragment and fill holes at offsets of 4k(i.e, 1 fsblock) - which works fine with 4k block size, but with 64k block size, the test tries to fragment and fill holes within 1 fsblock(of size 64k). This results in overwrite of 64k fsblocks and the write fails. The reason for this failure is that during overwrite, there is no more space available for COW.
Fix this by changing the pwrite block size and offsets to 64k so that the test never tries to punch holes or overwrite within 1 fsblock and the test becomes compatible with all block sizes.
Quoted 2 lines
For non-COW filesystems/files, this test should work even if the underlying filesytem block size > 64k.
Hi Qu,
Do you have any other feedback for this? I have reverted the block size to 4k during fs filling as suggested in [1]
[1] https://lore.kernel.org/all/[email protected]/
--NR
Quoted 40 lines
Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>--- tests/generic/274 | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)tests/generic/274 +4
-4@@ -40,8 +40,8 @@ _scratch_unmount 2>/dev/null _scratch_mkfs_sized $((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1 _scratch_mount -# Create a 4k file and Allocate 4M past EOF on that file -$XFS_IO_PROG -f -c "pwrite 0 4k" -c "falloc -k 4k 4m" $SCRATCH_MNT/test \ +# Create a 64k file and Allocate 64M past EOF on that file +$XFS_IO_PROG -f -c "pwrite 0 64k" -c "falloc -k 64k 64m" $SCRATCH_MNT/test \ >>$seqres.full 2>&1 || _fail "failed to create test file" # Fill the rest of the fs completely@@ -63,7 +63,7 @@ df $SCRATCH_MNT >>$seqres.full 2>&1 echo "Fill in prealloc space; fragment at offsets:" >> $seqres.full for i in `seq 1 2 1023`; do echo -n "$i " >> $seqres.full - dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \ + dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \ >>$seqres.full 2>/dev/null || _fail "failed to write to test file" done _scratch_sync@@ -71,7 +71,7 @@ echo >> $seqres.full echo "Fill in prealloc space; fill holes at offsets:" >> $seqres.full for i in `seq 2 2 1023`; do echo -n "$i " >> $seqres.full - dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \ + dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \ >>$seqres.full 2>/dev/null || _fail "failed to fill test file" done _scratch_sync
Signature · 3 lines
Nirjhar Roy Linux Kernel Developer IBM, Bangalore
Qu Wenruo
Reviewed-byRe: [PATCH v3 2/4] generic/274: Make the pwrite block sizes and offsets to 64k
Quoted 15 lines · Nirjhar Roy (IBM)
Quoted 13 lines · Nirjhar Roy (IBM)
This test was written with 4k block size in mind and it fails with 64k block size when tested with btrfs.
The test first does pre-allocation, then fills up the filesystem. After that it tries to fragment and fill holes at offsets of 4k(i.e, 1 fsblock) - which works fine with 4k block size, but with 64k block size, the test tries to fragment and fill holes within 1 fsblock(of size 64k). This results in overwrite of 64k fsblocks and the write fails. The reason for this failure is that during overwrite, there is no more space available for COW.
Fix this by changing the pwrite block size and offsets to 64k so that the test never tries to punch holes or overwrite within 1 fsblock and the test becomes compatible with all block sizes.
Quoted 6 lines
Quoted 2 lines
For non-COW filesystems/files, this test should work even if the underlying filesytem block size > 64k.
Hi Qu,
Do you have any other feedback for this? I have reverted the block size to 4k during fs filling as suggested in [1]
With that changed I'm totally fine. Feel free to add my tag:
Thanks,
Qu
Quoted 50 lines
[1] https://lore.kernel.org/all/0a10a9b0-a55c-4607- [email protected]/
--NR
Quoted 44 lines
Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>---
tests/generic/274 | 8 ++++----1 file changed, 4 insertions(+), 4 deletions(-)tests/generic/274 +0
-0@@ -40,8 +40,8 @@ _scratch_unmount 2>/dev/null
_scratch_mkfs_sized$((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1_scratch_mount
-# Create a 4k file and Allocate 4M past EOF on that file -$XFS_IO_PROG -f -c "pwrite 0 4k" -c "falloc -k 4k 4m" $SCRATCH_MNT/ test \
+# Create a 64k file and Allocate 64M past EOF on that file +$XFS_IO_PROG -f -c "pwrite 0 64k" -c "falloc -k 64k 64m" $SCRATCH_MNT/test \
>>$seqres.full 2>&1 ||_fail"failed to create test file" # Fill the rest of the fs completelytests/generic/274 +0
-0@@ -63,7 +63,7 @@ df $SCRATCH_MNT >>$seqres.full 2>&1echo "Fill in prealloc space; fragment at offsets:" >> $seqres.full for i in
seq 1 2 1023; do
echo -n "$i " >> $seqres.full
- dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \
+ dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \
>>$seqres.full 2>/dev/null ||_fail"failed to write to test file" done
_scratch_synctests/generic/274 +0
-0@@ -71,7 +71,7 @@ echo >> $seqres.fullecho "Fill in prealloc space; fill holes at offsets:" >> $seqres.full for i in
seq 2 2 1023; do
echo -n "$i " >> $seqres.full
- dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \
+ dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \
>>$seqres.full 2>/dev/null ||_fail"failed to fill test file" done
_scratch_sync
Re: [PATCH v3 2/4] generic/274: Make the pwrite block sizes and offsets to 64k
Quoted 21 lines · Qu Wenruo
Quoted 18 lines · Nirjhar Roy (IBM)
Quoted 15 lines · Nirjhar Roy (IBM)
This test was written with 4k block size in mind and it fails with 64k block size when tested with btrfs.
The test first does pre-allocation, then fills up the filesystem. After that it tries to fragment and fill holes at offsets of 4k(i.e, 1 fsblock) - which works fine with 4k block size, but with 64k block size, the test tries to fragment and fill holes within 1 fsblock(of size 64k). This results in overwrite of 64k fsblocks and the write fails. The reason for this failure is that during overwrite, there is no more space available for COW.
Fix this by changing the pwrite block size and offsets to 64k so that the test never tries to punch holes or overwrite within 1 fsblock and the test becomes compatible with all block sizes.For non-COW filesystems/files, this test should work even if the underlying filesytem block size > 64k.
Quoted 7 lines
Quoted 3 lines
Hi Qu,
Do you have any other feedback for this? I have reverted the block size to 4k during fs filling as suggested in [1]
With that changed I'm totally fine. Feel free to add my tag:
Reviewed-by Qu Wenruo <[email protected]>
Thanks. Added the RBs, fixed some typos and sent the final [v4].
[v4] https://lore.kernel.org/all/[email protected]/
--NR
Quoted 54 lines
Thanks,
QuQuoted 50 lines
[1] https://lore.kernel.org/all/0a10a9b0-a55c-4607- [email protected]/
--NR
Quoted 44 lines
Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>---
tests/generic/274 | 8 ++++----1 file changed, 4 insertions(+), 4 deletions(-)tests/generic/274 +0
-0@@ -40,8 +40,8 @@ _scratch_unmount 2>/dev/null
_scratch_mkfs_sized$((2 * 1024 * 1024 * 1024)) >>$seqres.full 2>&1_scratch_mount
-# Create a 4k file and Allocate 4M past EOF on that file -$XFS_IO_PROG -f -c "pwrite 0 4k" -c "falloc -k 4k 4m" $SCRATCH_MNT/ test \
+# Create a 64k file and Allocate 64M past EOF on that file +$XFS_IO_PROG -f -c "pwrite 0 64k" -c "falloc -k 64k 64m" $SCRATCH_MNT/test \
>>$seqres.full 2>&1 ||_fail"failed to create test file" # Fill the rest of the fs completelytests/generic/274 +0
-0@@ -63,7 +63,7 @@ df $SCRATCH_MNT >>$seqres.full 2>&1echo "Fill in prealloc space; fragment at offsets:" >> $seqres.full for i in
seq 1 2 1023; do
echo -n "$i " >> $seqres.full
- dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \
+ dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \
>>$seqres.full 2>/dev/null ||_fail"failed to write to test file" done
_scratch_synctests/generic/274 +0
-0@@ -71,7 +71,7 @@ echo >> $seqres.fullecho "Fill in prealloc space; fill holes at offsets:" >> $seqres.full for i in
seq 2 2 1023; do
echo -n "$i " >> $seqres.full
- dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=4K count=1 conv=notrunc \
+ dd if=/dev/zero of=$SCRATCH_MNT/test seek=$i bs=64K count=1 conv=notrunc \
>>$seqres.full 2>/dev/null ||_fail"failed to fill test file" done
_scratch_sync
Signature · 3 lines
Nirjhar Roy Linux Kernel Developer IBM, Bangalore
PATCH v3 3/4 btrfs/137: Make this test compatible with all supported block sizes
In reply to Nirjhar Roy (IBM)For large block sizes like 64k it failed simply because this test was written with 4k block size in mind.
The first few lines of the error logs are as follows:
d3dc847171f9081bd75d7a2d3b53d322 SCRATCH_MNT/snap2/bar
File snap1/foo fiemap results in the original filesystem:
-0: [0..7]: data
+0: [0..127]: data
File snap1/bar fiemap results in the original filesystem:
...Fix this by making the test choose offsets and block size as 64k which is aligned with all the underlying supported fs block sizes.
--- tests/btrfs/137 | 11 ++++---- tests/btrfs/137.out | 66 ++++++++++++++++++++++----------------------- 2 files changed, 39 insertions(+), 38 deletions(-)
tests/btrfs/137 +6 -5
@@ -23,6 +23,7 @@ _cleanup() _require_test _require_scratch _require_xfs_io_command "fiemap" +_require_btrfs_no_compress send_files_dir=$TEST_DIR/btrfs-test-$seq
@@ -33,12 +34,12 @@ _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount # Create the first test file. -$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 4K" $SCRATCH_MNT/foo | _filter_xfs_io +$XFS_IO_PROG -f -c "pwrite -S 0xaa -b 64k 0 64K" $SCRATCH_MNT/foo | _filter_xfs_io # Create a second test file with a 1Mb hole. $XFS_IO_PROG -f \ - -c "pwrite -S 0xaa 0 4K" \ - -c "pwrite -S 0xbb 1028K 4K" \ + -c "pwrite -S 0xaa -b 64k 0 64K" \ + -c "pwrite -S 0xbb -b 64k 1088K 64K" \ $SCRATCH_MNT/bar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \
@@ -46,10 +47,10 @@ $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \ # Now add one new extent to our first test file, increasing its size and leaving # a 1Mb hole between the first extent and this new extent. -$XFS_IO_PROG -c "pwrite -S 0xbb 1028K 4K" $SCRATCH_MNT/foo | _filter_xfs_io +$XFS_IO_PROG -c "pwrite -S 0xbb -b 64k 1088K 64K" $SCRATCH_MNT/foo | _filter_xfs_io # Now overwrite the last extent of our second test file. -$XFS_IO_PROG -c "pwrite -S 0xcc 1028K 4K" $SCRATCH_MNT/bar | _filter_xfs_io +$XFS_IO_PROG -c "pwrite -S 0xcc -b 64k 1088K 64K" $SCRATCH_MNT/bar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \ $SCRATCH_MNT/snap2 >/dev/null
tests/btrfs/137.out +33 -33
96 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v3 3/4] btrfs/137: Make this test compatible with all supported block sizes
Quoted 13 lines · Nirjhar Roy (IBM)
For large block sizes like 64k it failed simply because this test was written with 4k block size in mind.
The first few lines of the error logs are as follows:d3dc847171f9081bd75d7a2d3b53d322 SCRATCH_MNT/snap2/bar File snap1/foo fiemap results in the original filesystem: -0: [0..7]: data +0: [0..127]: data File snap1/bar fiemap results in the original filesystem: ...
Quoted 6 lines
Fix this by making the test choose offsets and block size as 64k which is aligned with all the underlying supported fs block sizes.
Reviewed-by Qu Wenruo <[email protected]>Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>
I tested it on Power, and the btrfs/137 test passes with both 4k & 64k block sizes.
SECTION -- btrfs_64k RECREATING -- btrfs on /dev/loop0 FSTYP -- btrfs PLATFORM -- Linux/ppc64le localhost 6.17.0-rc2-00060-g068a56e56fa8 #3 SMP Thu Aug 21 17:54:04 IST 2025 MKFS_OPTIONS -- -f -s 65536 -n 65536 /dev/loop1
MOUNT_OPTIONS -- /dev/loop1 /mnt/scratch
btrfs/137 2s ... 1s
Ran: btrfs/137
Passed all 1 tests
Quoted 147 lines
--- tests/btrfs/137 | 11 ++++---- tests/btrfs/137.out | 66 ++++++++++++++++++++++----------------------- 2 files changed, 39 insertions(+), 38 deletions(-)tests/btrfs/137 +6
-5@@ -23,6 +23,7 @@ _cleanup() _require_test _require_scratch _require_xfs_io_command "fiemap" +_require_btrfs_no_compress send_files_dir=$TEST_DIR/btrfs-test-$seq@@ -33,12 +34,12 @@ _scratch_mkfs >>$seqres.full 2>&1 _scratch_mount # Create the first test file. -$XFS_IO_PROG -f -c "pwrite -S 0xaa 0 4K" $SCRATCH_MNT/foo | _filter_xfs_io +$XFS_IO_PROG -f -c "pwrite -S 0xaa -b 64k 0 64K" $SCRATCH_MNT/foo | _filter_xfs_io # Create a second test file with a 1Mb hole. $XFS_IO_PROG -f \ - -c "pwrite -S 0xaa 0 4K" \ - -c "pwrite -S 0xbb 1028K 4K" \ + -c "pwrite -S 0xaa -b 64k 0 64K" \ + -c "pwrite -S 0xbb -b 64k 1088K 64K" \ $SCRATCH_MNT/bar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \@@ -46,10 +47,10 @@ $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \ # Now add one new extent to our first test file, increasing its size and leaving # a 1Mb hole between the first extent and this new extent. -$XFS_IO_PROG -c "pwrite -S 0xbb 1028K 4K" $SCRATCH_MNT/foo | _filter_xfs_io +$XFS_IO_PROG -c "pwrite -S 0xbb -b 64k 1088K 64K" $SCRATCH_MNT/foo | _filter_xfs_io # Now overwrite the last extent of our second test file. -$XFS_IO_PROG -c "pwrite -S 0xcc 1028K 4K" $SCRATCH_MNT/bar | _filter_xfs_io +$XFS_IO_PROG -c "pwrite -S 0xcc -b 64k 1088K 64K" $SCRATCH_MNT/bar | _filter_xfs_io $BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT \ $SCRATCH_MNT/snap2 >/dev/nulltests/btrfs/137.out +33
-33@@ -1,63 +1,63 @@ QA output created by 137 -wrote 4096/4096 bytes at offset 0 +wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -wrote 4096/4096 bytes at offset 0 +wrote 65536/65536 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -wrote 4096/4096 bytes at offset 1052672 +wrote 65536/65536 bytes at offset 1114112 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -wrote 4096/4096 bytes at offset 1052672 +wrote 65536/65536 bytes at offset 1114112 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) -wrote 4096/4096 bytes at offset 1052672 +wrote 65536/65536 bytes at offset 1114112 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File digests in the original filesystem: -3e4309c7cc81f23d45e260a8f13ca860 SCRATCH_MNT/snap1/foo -f3934f0cf164e2efa1bab71f2f164990 SCRATCH_MNT/snap1/bar -f3934f0cf164e2efa1bab71f2f164990 SCRATCH_MNT/snap2/foo -d3dc847171f9081bd75d7a2d3b53d322 SCRATCH_MNT/snap2/bar +9802287a6faa01a1fd0e01732b732fca SCRATCH_MNT/snap1/foo +fe93f68ad1d8d5e47feba666ee6d3c47 SCRATCH_MNT/snap1/bar +fe93f68ad1d8d5e47feba666ee6d3c47 SCRATCH_MNT/snap2/foo +8d06f9b5841190b586a7526d0dd356f3 SCRATCH_MNT/snap2/bar File snap1/foo fiemap results in the original filesystem: -0: [0..7]: data +0: [0..127]: data File snap1/bar fiemap results in the original filesystem: -0: [0..7]: data -1: [8..2055]: hole -2: [2056..2063]: data +0: [0..127]: data +1: [128..2175]: hole +2: [2176..2303]: data File snap2/foo fiemap results in the original filesystem: -0: [0..7]: data -1: [8..2055]: hole -2: [2056..2063]: data +0: [0..127]: data +1: [128..2175]: hole +2: [2176..2303]: data File snap2/bar fiemap results in the original filesystem: -0: [0..7]: data -1: [8..2055]: hole -2: [2056..2063]: data +0: [0..127]: data +1: [128..2175]: hole +2: [2176..2303]: data At subvol SCRATCH_MNT/snap1 At subvol SCRATCH_MNT/snap2 At subvol snap1 File digests in the new filesystem: -3e4309c7cc81f23d45e260a8f13ca860 SCRATCH_MNT/snap1/foo -f3934f0cf164e2efa1bab71f2f164990 SCRATCH_MNT/snap1/bar -f3934f0cf164e2efa1bab71f2f164990 SCRATCH_MNT/snap2/foo -d3dc847171f9081bd75d7a2d3b53d322 SCRATCH_MNT/snap2/bar +9802287a6faa01a1fd0e01732b732fca SCRATCH_MNT/snap1/foo +fe93f68ad1d8d5e47feba666ee6d3c47 SCRATCH_MNT/snap1/bar +fe93f68ad1d8d5e47feba666ee6d3c47 SCRATCH_MNT/snap2/foo +8d06f9b5841190b586a7526d0dd356f3 SCRATCH_MNT/snap2/bar File snap1/foo fiemap results in the new filesystem: -0: [0..7]: data +0: [0..127]: data File snap1/bar fiemap results in the new filesystem: -0: [0..7]: data -1: [8..2055]: hole -2: [2056..2063]: data +0: [0..127]: data +1: [128..2175]: hole +2: [2176..2303]: data File snap2/foo fiemap results in the new filesystem: -0: [0..7]: data -1: [8..2055]: hole -2: [2056..2063]: data +0: [0..127]: data +1: [128..2175]: hole +2: [2176..2303]: data File snap2/bar fiemap results in the new filesystem: -0: [0..7]: data -1: [8..2055]: hole -2: [2056..2063]: data +0: [0..127]: data +1: [128..2175]: hole +2: [2176..2303]: data
PATCH v3 4/4 generic/563: Increase the iosize to to cover for btrfs
In reply to Nirjhar Roy (IBM)When tested with block size/node size 64K on btrfs, then the test fails with the folllowing error:
QA output created by 563
read/write
read is in range
-write is in range
+write has value of 8855552
+write is NOT in range 7969177.6 .. 8808038.4
write -> read/write
...The slight increase in the amount of bytes that are written is because of the increase in the the nodesize(metadata) and hence it exceeds the tolerance limit slightly. Fix this by increasing the iosize. Increasing the iosize increases the tolerance range and covers the tolerance for btrfs higher node sizes.
A very detailed explanation is given by Qu Wenruo in [1]
[1] https://lore.kernel.org/all/[email protected]/
--- tests/generic/563 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tests/generic/563 +1 -1
@@ -43,7 +43,7 @@ _require_block_device $SCRATCH_DEV _require_non_zoned_device ${SCRATCH_DEV} cgdir=$CGROUP2_PATH -iosize=$((1024 * 1024 * 8)) +iosize=$((1024 * 1024 * 16)) # Check cgroup read/write charges against expected values. Allow for some # tolerance as different filesystems seem to account slightly differently.
Signature · 1 line
2.34.1
Re: [PATCH v3 4/4] generic/563: Increase the iosize to to cover for btrfs
Quoted 17 lines · Nirjhar Roy (IBM)
When tested with block size/node size 64K on btrfs, then the test fails with the folllowing error:
QA output created by 563 read/write read is in range -write is in range +write has value of 8855552 +write is NOT in range 7969177.6 .. 8808038.4 write -> read/write ...The slight increase in the amount of bytes that are written is because of the increase in the the nodesize(metadata) and hence it exceeds the tolerance limit slightly. Fix this by increasing the iosize. Increasing the iosize increases the tolerance range and covers the tolerance for btrfs higher node sizes.
A very detailed explanation is given by Qu Wenruo in [1]
Quoted 5 lines
[1] https://lore.kernel.org/all/[email protected]/
Reviewed-by Qu Wenruo <[email protected]>Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>
The patch looks good. However, the subject line seems incorrect, could you please fix it.
I tested it on Power, and the generic/563 test passes with both 4k & 64k block sizes.
Quoted 17 lines
--- tests/generic/563 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tests/generic/563 +1
-1@@ -43,7 +43,7 @@ _require_block_device $SCRATCH_DEV _require_non_zoned_device ${SCRATCH_DEV} cgdir=$CGROUP2_PATH -iosize=$((1024 * 1024 * 8)) +iosize=$((1024 * 1024 * 16)) # Check cgroup read/write charges against expected values. Allow for some # tolerance as different filesystems seem to account slightly differently.
Re: [PATCH v3 4/4] generic/563: Increase the iosize to to cover for btrfs
Quoted 18 lines · Disha Goel
Quoted 17 lines · Nirjhar Roy (IBM)
When tested with block size/node size 64K on btrfs, then the test fails with the folllowing error:
QA output created by 563
read/write
read is in range
-write is in range
+write has value of 8855552
+write is NOT in range 7969177.6 .. 8808038.4
write -> read/write
...
The slight increase in the amount of bytes that are written is because of the increase in the the nodesize(metadata) and hence it exceeds the tolerance limit slightly. Fix this by increasing the iosize. Increasing the iosize increases the tolerance range and covers the tolerance for btrfs higher node sizes.
A very detailed explanation is given by Qu Wenruo in [1]
Quoted 7 lines
Quoted 5 lines
[1] https://lore.kernel.org/all/[email protected]/
Reviewed-by Qu Wenruo <[email protected]>Reported-by Disha Goel <[email protected]>Signed-off-by Nirjhar Roy (IBM) <[email protected]>The patch looks good. However, the subject line seems incorrect, could you please fix it.
Thanks. Added the RBs, fixed some typos and sent the final [v4].
[v4] https://lore.kernel.org/all/[email protected]/
--NR
Quoted 21 lines
I tested it on Power, and the generic/563 test passes with both 4k & 64k block sizes.
Tested-by Disha Goel <[email protected]>Quoted 15 lines
---
tests/generic/563 | 2 +-1 file changed, 1 insertion(+), 1 deletion(-)tests/generic/563 +0
-0@@ -43,7 +43,7 @@ _require_block_device $SCRATCH_DEV _require_non_zoned_device ${SCRATCH_DEV}cgdir=$CGROUP2_PATH
tests/generic/563 +1
-1-iosize=$((1024 * 1024 * 8)) +iosize=$((1024 * 1024 * 16))# Check cgroup read/write charges against expected values. Allow for some
# tolerance as different filesystems seem to account slightly differently.
Signature · 3 lines
Nirjhar Roy Linux Kernel Developer IBM, Bangalore
Quoted 11 lines · Nirjhar Roy (IBM)
Some of the btrfs and generic tests are written with 4k block/node size in mind. This patch fixes some of those tests to be compatible with other block/node sizes too. We caught these bugs while running the auto group tests on btrfs with large block/node sizes.
[v2] -> v3
1. Added RBs by Qu Wenruo in btrfs/{301, 137}
2. Updated the commit message of generic/563 with a more detailed explanation by Qu Wenrou.
3. Reverted by block size from 64k to 4k while filling the filesystem with dd for test generic/274.
Hi Nirjhar,
The changes look good. With the commit message typo fixed for generic/563, feel free to add
Regards,
ojaswin
Quoted 30 lines
[v1] -> [v2]:
1. Removed the patch for btrfs/200 of [v1] - need more analysis on this.
2. Removed the first 2 patches of [v1] which introduced 2 new helper functions
3. btrfs/{137,301} and generic/274 - Instead of scaling the test dynamically based on the underlying disk block size, I have hardcoded the pwrite blocksizes and offsets to 64k which is aligned to all underlying fs block sizes <= 64.
4. For generic/563 - Doubled the iosize instead of btrfs specific hack to cover for btrfs write ranges.
5. Updated the commit messages[v1] - https://lore.kernel.org/all/[email protected]/
[v2] - https://lore.kernel.org/all/[email protected]/Nirjhar Roy (IBM) (4):
btrfs/301: Make the test compatible with all the supported block sizes generic/274: Make the pwrite block sizes and offsets to 64k btrfs/137: Make this test compatible with all supported block sizes generic/563: Increase the iosize to to cover for btrfstests/btrfs/137 | 11 ++++---- tests/btrfs/137.out | 66 ++++++++++++++++++++++----------------------- tests/btrfs/301 | 2 +- tests/generic/274 | 8 +++--- tests/generic/563 | 2 +- 5 files changed, 45 insertions(+), 44 deletions(-)--
2.34.1
Quoted 12 lines · Ojaswin Mujoo
Quoted 11 lines · Nirjhar Roy (IBM)
Some of the btrfs and generic tests are written with 4k block/node size in mind. This patch fixes some of those tests to be compatible with other block/node sizes too. We caught these bugs while running the auto group tests on btrfs with large block/node sizes.
[v2] -> v3
1. Added RBs by Qu Wenruo in btrfs/{301, 137}
2. Updated the commit message of generic/563 with a more detailed explanation by Qu Wenrou.
3. Reverted by block size from 64k to 4k while filling the filesystem with dd for test generic/274.
Quoted 6 lines
Hi Nirjhar,
The changes look good. With the commit message typo fixed for generic/563, feel free to add
Reviewed-by Ojaswin Mujoo <[email protected]>
Thanks. Added the RBs, fixed some typos and sent the final [v4].
[v4] https://lore.kernel.org/all/[email protected]/
--NR
Quoted 33 lines
Regards,
ojaswinQuoted 29 lines
[v1] -> [v2]:
1. Removed the patch for btrfs/200 of [v1] - need more analysis on this.
2. Removed the first 2 patches of [v1] which introduced 2 new helper functions
3. btrfs/{137,301} and generic/274 - Instead of scaling the test dynamically based on the underlying disk block size, I have hardcoded the pwrite blocksizes and offsets to 64k which is aligned to all underlying fs block sizes <= 64.
4. For generic/563 - Doubled the iosize instead of btrfs specific hack to cover for btrfs write ranges.
5. Updated the commit messages[v1] - https://lore.kernel.org/all/[email protected]/
[v2] - https://lore.kernel.org/all/[email protected]/Nirjhar Roy (IBM) (4):
btrfs/301: Make the test compatible with all the supported block sizes generic/274: Make the pwrite block sizes and offsets to 64k btrfs/137: Make this test compatible with all supported block sizes generic/563: Increase the iosize to to cover for btrfstests/btrfs/137 | 11 ++++---- tests/btrfs/137.out | 66 ++++++++++++++++++++++----------------------- tests/btrfs/301 | 2 +- tests/generic/274 | 8 +++--- tests/generic/563 | 2 +- 5 files changed, 45 insertions(+), 44 deletions(-)--
2.34.1
Signature · 3 lines
Nirjhar Roy Linux Kernel Developer IBM, Bangalore