ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Subsystems (9)
PATCH RESEND 1/8 ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make DEBUG_BCM63XX_UART depending on ARCH_BCMBCA.
---
arch/arm/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig.debug +1 -1
@@ -271,7 +271,7 @@ choice config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" - depends on ARCH_BCM_63XX + depends on ARCH_BCMBCA config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART"
Signature · 1 line
2.34.1
PATCH RESEND 2/8 ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make AHCI_BRCM depending on ARCH_BCMBCA.
---
drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/Kconfig +1 -1
@@ -148,7 +148,7 @@ config SATA_AHCI_PLATFORM config AHCI_BRCM tristate "Broadcom AHCI SATA support" depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \ - ARCH_BCM_63XX || COMPILE_TEST + ARCH_BCMBCA || COMPILE_TEST select SATA_HOST help This option enables support for the AHCI SATA3 controller found on
Signature · 1 line
2.34.1
Re: [RESEND PATCH 2/8] ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeAHCI_BRCMdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Damien Le Moal <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Florian Fainelli
AppliedRe: [RESEND PATCH 2/8] ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 6 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeAHCI_BRCMdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Damien Le Moal <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
PATCH RESEND 3/8 hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangPrepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.
---
drivers/char/hw_random/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/hw_random/Kconfig +1 -1
@@ -87,7 +87,7 @@ config HW_RANDOM_BA431 config HW_RANDOM_BCM2835 tristate "Broadcom BCM2835/BCM63xx Random Number Generator support" depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \ - ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST + ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST default HW_RANDOM help This driver provides kernel-side support for the Random Number
Signature · 1 line
2.34.1
Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 4 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeHW_RANDOM_BCM2835depending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 10 lines · Florian Fainelli
Quoted 4 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeHW_RANDOM_BCM2835depending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Florian Fainelli <[email protected]>There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
The cover letter will gather all the recipients which will be more than 50 and this mailing list blocks such post until it is manually reviewed and approved. But looks this list is not actively moderated and my cover letter and the combined patch of this set in v1 still have not been approved yet...
Quoted 1 line
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Thank you Florian! I agree and the changes in this patch series are trivial and only for Broadcom ARM Broadband chip after all.
Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 5 lines · William Zhang
Quoted 4 lines · Florian Fainelli
Quoted 3 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeHW_RANDOM_BCM2835depending onARCH_BCMBCA.
Quoted 7 lines
Quoted 6 lines
Quoted 1 line
Signed-off-by William Zhang <[email protected]>Acked-by Florian Fainelli <[email protected]>There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
The cover letter will gather all the recipients which will be more than 50
tbf, you probably could cut down the CC list if you want, it isnt required to CC absolutely everyone that gets spat out by get_maintainer.
For example, I am CCed because I was a recent author for the hwrng kconfig file, so people like me could be safely excluded if you need to cut down on the number of people that you are CCing.
Not that I have a problem with being CCed, just if it helps you hit a min. threshold feel free to drop me :)
Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 17 lines · On 7/7/22 10:16, [email protected] wrote:
Quoted 5 lines · William Zhang
Quoted 4 lines · Florian Fainelli
Quoted 3 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeHW_RANDOM_BCM2835depending onARCH_BCMBCA.Quoted 7 lines
Quoted 6 lines
Quoted 1 line
Signed-off-by William Zhang <[email protected]>Acked-by Florian Fainelli <[email protected]>There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
The cover letter will gather all the recipients which will be more than 50
tbf, you probably could cut down the CC list if you want, it isnt required to CC absolutely everyone that gets spat out by
get_maintainer.
Quoted 6 lines
For example, I am CCed because I was a recent author for the hwrng kconfig file, so people like me could be safely excluded if you need to cut down on the number of people that you are CCing.
Not that I have a problem with being CCed, just if it helps you hit a min. threshold feel free to drop me :)
Thanks! That is my plan too. Try to figure out the threshold now lol
Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 20 lines · William Zhang
Quoted 17 lines · On 7/7/22 10:16, [email protected] wrote:
Quoted 5 lines · William Zhang
Quoted 4 lines · Florian Fainelli
Quoted 3 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeHW_RANDOM_BCM2835depending onARCH_BCMBCA.Quoted 7 lines
Quoted 6 lines
Quoted 1 line
Signed-off-by William Zhang <[email protected]>Acked-by Florian Fainelli <[email protected]>There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
The cover letter will gather all the recipients which will be more than 50
tbf, you probably could cut down the CC list if you want, it isnt required to CC absolutely everyone that gets spat out by
get_maintainer.
Quoted 7 lines
Quoted 6 lines
For example, I am CCed because I was a recent author for the hwrng kconfig file, so people like me could be safely excluded if you need to cut down on the number of people that you are CCing.
Not that I have a problem with being CCed, just if it helps you hit a min. threshold feel free to drop me :)
Thanks! That is my plan too. Try to figure out the threshold now lol
Try adding --norolestats to your get_maintainer.pl invocation.
Signature · 1 line
Florian
Florian Fainelli
AppliedRe: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeHW_RANDOM_BCM2835depending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
PATCH RESEND 4/8 clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangPrepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make CLK_BCM_63XX depending and setting default on ARCH_BCMBCA.
---
drivers/clk/bcm/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/bcm/Kconfig +2 -2
@@ -22,9 +22,9 @@ config CLK_BCM2835 config CLK_BCM_63XX bool "Broadcom BCM63xx clock support" - depends on ARCH_BCM_63XX || COMPILE_TEST + depends on ARCH_BCMBCA || COMPILE_TEST select COMMON_CLK_IPROC - default ARCH_BCM_63XX + default ARCH_BCMBCA help Enable common clock framework support for Broadcom BCM63xx DSL SoCs based on the ARM architecture
Signature · 1 line
2.34.1
Re: [RESEND PATCH 4/8] clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 4 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeCLK_BCM_63XXdepending and setting default onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Florian Fainelli
AppliedRe: [RESEND PATCH 4/8] clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeCLK_BCM_63XXdepending and setting default onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
Re: [RESEND PATCH 4/8] clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoting William Zhang (2022-07-06 23:57:55)
Quoted 5 lines
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeCLK_BCM_63XXdepending and setting default onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
PATCH RESEND 5/8 i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangPrepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make I2C_BRCMSTB depending on ARCH_BCMBCA.
---
drivers/i2c/busses/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/Kconfig +1 -1
@@ -486,7 +486,7 @@ config I2C_BCM_KONA config I2C_BRCMSTB tristate "BRCM Settop/DSL I2C controller" - depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \ + depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \ ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST default y help
Signature · 1 line
2.34.1
Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeI2C_BRCMSTBdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Wolfram Sang <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 3 lines
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
That's what I assumed (and also prefer), so I acked the I2C patch. Let me know, guys, if I should pick it instead.
Florian Fainelli
AppliedRe: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 6 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeI2C_BRCMSTBdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Wolfram Sang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
PATCH RESEND 6/8 phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangPrepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make PHY_BRCM_SATA depending on ARCH_BCMBCA.
---
drivers/phy/broadcom/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/broadcom/Kconfig +1 -1
@@ -83,7 +83,7 @@ config PHY_NS2_USB_DRD config PHY_BRCM_SATA tristate "Broadcom SATA PHY driver" depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \ - ARCH_BCM_63XX || COMPILE_TEST + ARCH_BCMBCA || COMPILE_TEST depends on OF select GENERIC_PHY default ARCH_BCM_IPROC
Signature · 1 line
2.34.1
Re: [RESEND PATCH 6/8] phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakePHY_BRCM_SATAdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Vinod Koul <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Florian Fainelli
AppliedRe: [RESEND PATCH 6/8] phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 6 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakePHY_BRCM_SATAdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>Acked-by Vinod Koul <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
PATCH RESEND 7/8 spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangPrepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.
---
drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/Kconfig +1 -1
@@ -183,7 +183,7 @@ config SPI_BCM63XX config SPI_BCM63XX_HSSPI tristate "Broadcom BCM63XX HS SPI controller driver" - depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST + depends on BCM63XX || BMIPS_GENERIC || ARCH_BCMBCA || COMPILE_TEST help This enables support for the High Speed SPI controller present on newer Broadcom BCM63XX SoCs.
Signature · 1 line
2.34.1
Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 4 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeSPI_BCM63XX_HSSPIdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Florian Fainelli
AppliedRe: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeSPI_BCM63XX_HSSPIdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
Mark Brown
maintainerRe: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 5 lines · Florian Fainelli
Quoted 2 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeSPI_BCM63XX_HSSPIdepending onARCH_BCMBCA.Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks!
I was rather hoping for an answer on what the situation with dependencies was here...
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 9 lines · Mark Brown
Quoted 5 lines · Florian Fainelli
Quoted 2 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeSPI_BCM63XX_HSSPIdepending onARCH_BCMBCA.Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks!
I was rather hoping for an answer on what the situation with dependencies was here...
Each patch is independent from one another and there are not dependencies on the Broadcom arm-soc tree(s) other than for CONFIG_ARCH_BCMBCA which was introduced with v5.19 with b32c613b3fda3e1c26119609f1ad6b19178f82f5. That said, I prefer to take all patches via the Broadcom arm-soc tree(s) to ensure a timely inclusion for our upcoming v5.20 pull request, and ensure that all drivers are converted in one release cycle.
If you want to give me your Acked-by or that I drop this and take it via the spi tree, please let me know.
Thanks!
Signature · 1 line
Florian
Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 9 lines · Florian Fainelli
Each patch is independent from one another and there are not dependencies on the Broadcom arm-soc tree(s) other than for
CONFIG_ARCH_BCMBCAwhich was introduced with v5.19 withb32c613b3fda3e1c26119609f1ad6b19178f82f5. That said, I prefer to take all patches via the Broadcom arm-soc tree(s) to ensure a timely inclusion for our upcoming v5.20 pull request, and ensure that all drivers are converted in one release cycle.If you want to give me your Acked-by or that I drop this and take it via the spi tree, please let me know.
Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 9 lines · Mark Brown
Quoted 6 lines · Florian Fainelli
Each patch is independent from one another and there are not dependencies on the Broadcom arm-soc tree(s) other than for
CONFIG_ARCH_BCMBCAwhich was introduced with v5.19 withb32c613b3fda3e1c26119609f1ad6b19178f82f5. That said, I prefer to take all patches via the Broadcom arm-soc tree(s) to ensure a timely inclusion for our upcoming v5.20 pull request, and ensure that all drivers are converted in one release cycle.
Quoted 4 lines
Quoted 2 lines
If you want to give me your Acked-by or that I drop this and take it via the spi tree, please let me know.
Acked-by Mark Brown <[email protected]>
Thanks, FWIW, I had amended that patch with your ACked-by before sending it to the arm-soc maintainers.
Signature · 1 line
Florian
PATCH RESEND 8/8 tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangPrepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SERIAL_BCM63XX depending on ARCH_BCMBCA.
---
drivers/tty/serial/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/tty/serial/Kconfig +2 -2
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE config SERIAL_BCM63XX tristate "Broadcom BCM63xx/BCM33xx UART support" select SERIAL_CORE - depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST - default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC + depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST + default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC help This enables the driver for the onchip UART core found on the following chipsets:
Signature · 1 line
2.34.1
Re: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
Quoted 4 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeSERIAL_BCM63XXdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>
There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.
Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.
Signature · 1 line
Florian
Florian Fainelli
AppliedRe: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
In reply to William ZhangQuoted 6 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeSERIAL_BCM63XXdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks! --
Florian
Quoted 4 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeDEBUG_BCM63XX_UARTdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>
This patch belonged in your v2 series:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
but that is fine, I will pick it up from there.
Signature · 1 line
Florian
Florian Fainelli
AppliedQuoted 5 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeDEBUG_BCM63XX_UARTdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
Applied to https://github.com/Broadcom/stblinux/commits/soc/next, thanks! --
Florian
Quoted 14 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeDEBUG_BCM63XX_UARTdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
arch/arm/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/Kconfig.debug +0
-0
arch/arm/Kconfig.debug choice · line 277
Quoted 8 lines
arch/arm/Kconfig.debug +1
-1@@ -271,7 +271,7 @@ choice config DEBUG_BCM63XX_UART bool "Kernel low-level debugging on BCM63XX UART" - depends on ARCH_BCM_63XX + depends on ARCH_BCMBCA config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART"
There is no such config symbol (ARCH_BCMBCA) in Linus's tree.
This patchset is going to break builds until code it depends on hits Linus's tree.
All those patches should be hold until that.
Quoted 24 lines · Rafał Miłecki
Quoted 14 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeDEBUG_BCM63XX_UARTdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
arch/arm/Kconfig.debug| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/Kconfig.debug +0
-0@@ -271,7 +271,7 @@ choiceQuoted 6 lines
config
DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART" - depends onARCH_BCM_63XX
+ depends onARCH_BCMBCA
configDEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"There is no such config symbol (
ARCH_BCMBCA) in Linus's tree.
Quoted 3 lines
This patchset is going to break builds until code it depends on hits Linus's tree.
All those patches should be hold until that.
There is, ARCH_BCMBCA was added to arch/arm/mach-bcm/Kconfig with b32c613b3fda3 ("arm: bcmbca: add arch bcmbca machine entry") which is in v5.19-rc1 and newer:
git tag --contains b32c613b3fda3
arm-soc/for-5.19/devicetree-arm64-fixes
arm-soc/for-5.19/devicetree-fixes
arm-soc/for-5.19/drivers-fixes
arm-soc/for-5.19/maintainers-fixes
arm-soc/for-5.19/soc
arm-soc/for-5.20/defconfig
arm-soc/for-5.20/defconfig-arm64
arm-soc/for-5.20/devicetree
arm-soc/for-5.20/devicetree-arm64
arm-soc/for-5.20/drivers
arm-soc/for-5.20/maintainers
arm-soc/for-5.20/soc
ib-mfd-soc-bcm-v5.20
mips-fixes_5.19_1
mips-fixes_5.19_2
next-20220511
next-20220512
next-20220523
next-20220524
next-20220610
next-20220627
next-20220628
next-20220706
next-20220708
next-20220711
next-20220712
v5.19-rc1
v5.19-rc2
v5.19-rc3
v5.19-rc4
v5.19-rc5
v5.19-rc6
otherwise we would not have done it that way. Am I missing something?
Signature · 1 line
Florian
Quoted 25 lines · Florian Fainelli
Quoted 24 lines · Rafał Miłecki
Quoted 14 lines · William Zhang
Prepare for the BCM63138
ARCH_BCM_63XXmigration toARCH_BCMBCA. MakeDEBUG_BCM63XX_UARTdepending onARCH_BCMBCA.Signed-off-by William Zhang <[email protected]>---
arch/arm/Kconfig.debug| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/Kconfig.debug +0
-0@@ -271,7 +271,7 @@ choiceQuoted 6 lines
config
DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART" - depends onARCH_BCM_63XX
+ depends onARCH_BCMBCA
configDEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"There is no such config symbol (
ARCH_BCMBCA) in Linus's tree.
Quoted 5 lines
Quoted 3 lines
This patchset is going to break builds until code it depends on hits Linus's tree.
All those patches should be hold until that.
There is,
ARCH_BCMBCAwas added toarch/arm/mach-bcm/Kconfigwithb32c613b3fda3("arm: bcmbca: add arch bcmbca machine entry") which is in v5.19-rc1 and newer:
Oops, my tree updating script failed me. Sorry!
OK then, maybe this migration wasn't handled flawlessly but it's half done now and remaining things should be fixed with all pending work. Looks OK!