Skip to contentSkip to conversation

ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

PATCH RESEND Applied William Zhang 7 participants 37 messages Jul 7, 2022 – Jul 30, 2022

Subsystems (9)
lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/8 ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make DEBUG_BCM63XX_UART depending on ARCH_BCMBCA.

---

 arch/arm/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig.debug +1 -1
index 9b0aa4822d69..792796a348c3 100644
@@ -271,7 +271,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
Signature · 1 line
2.34.1
#1 lore raw

PATCH RESEND 2/8 ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make AHCI_BRCM depending on ARCH_BCMBCA.

---

 drivers/ata/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/Kconfig +1 -1
index bb45a9c00514..1c9f4fb2595d 100644
@@ -148,7 +148,7 @@ config SATA_AHCI_PLATFORM
 config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
-		   ARCH_BCM_63XX || COMPILE_TEST
+		   ARCH_BCMBCA || COMPILE_TEST
 	select SATA_HOST
 	help
 	  This option enables support for the AHCI SATA3 controller found on
Signature · 1 line
2.34.1
Acked-by on v1 2/8
#2 lore raw

Re: [RESEND PATCH 2/8] ata: ahci_brcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 5 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make AHCI_BRCM depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
#4 lore raw

PATCH RESEND 3/8 hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

In reply to William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.

---

 drivers/char/hw_random/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/char/hw_random/Kconfig +1 -1
index b3f2d55dc551..3da8e85f8aae 100644
@@ -87,7 +87,7 @@ config HW_RANDOM_BA431
 config HW_RANDOM_BCM2835
 	tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
 	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
-		   ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+		   ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
 	default HW_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
Signature · 1 line
2.34.1
Acked-by on v1 3/8
#5 lore raw

Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 4 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
#6 lore raw

Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 10 lines · Florian Fainelli
Quoted 4 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

The cover letter will gather all the recipients which will be more than 50 and this mailing list blocks such post until it is manually reviewed and approved. But looks this list is not actively moderated and my cover letter and the combined patch of this set in v1 still have not been approved yet...

Quoted 1 line

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Thank you Florian! I agree and the changes in this patch series are trivial and only for Broadcom ARM Broadband chip after all.

#7 lore raw

Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 5 lines · William Zhang
Quoted 4 lines · Florian Fainelli
Quoted 3 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.

Quoted 7 lines
Quoted 6 lines
Quoted 1 line

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

The cover letter will gather all the recipients which will be more than 50

tbf, you probably could cut down the CC list if you want, it isnt required to CC absolutely everyone that gets spat out by get_maintainer.

For example, I am CCed because I was a recent author for the hwrng kconfig file, so people like me could be safely excluded if you need to cut down on the number of people that you are CCing.

Not that I have a problem with being CCed, just if it helps you hit a min. threshold feel free to drop me :)

#8 lore raw

Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 17 lines · On 7/7/22 10:16, [email protected] wrote:
Quoted 5 lines · William Zhang
Quoted 4 lines · Florian Fainelli
Quoted 3 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.

Quoted 7 lines
Quoted 6 lines
Quoted 1 line

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

The cover letter will gather all the recipients which will be more than 50

tbf, you probably could cut down the CC list if you want, it isnt required to CC absolutely everyone that gets spat out by get_maintainer.

Quoted 6 lines

For example, I am CCed because I was a recent author for the hwrng kconfig file, so people like me could be safely excluded if you need to cut down on the number of people that you are CCing.

Not that I have a problem with being CCed, just if it helps you hit a min. threshold feel free to drop me :)

Thanks! That is my plan too. Try to figure out the threshold now lol

#9 lore raw

Re: [RESEND PATCH 3/8] hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 20 lines · William Zhang
Quoted 17 lines · On 7/7/22 10:16, [email protected] wrote:
Quoted 5 lines · William Zhang
Quoted 4 lines · Florian Fainelli
Quoted 3 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make HW_RANDOM_BCM2835 depending on ARCH_BCMBCA.

Quoted 7 lines
Quoted 6 lines
Quoted 1 line

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a posotion to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

The cover letter will gather all the recipients which will be more than 50

tbf, you probably could cut down the CC list if you want, it isnt required to CC absolutely everyone that gets spat out by get_maintainer.

Quoted 7 lines
Quoted 6 lines

For example, I am CCed because I was a recent author for the hwrng kconfig file, so people like me could be safely excluded if you need to cut down on the number of people that you are CCing.

Not that I have a problem with being CCed, just if it helps you hit a min. threshold feel free to drop me :)

Thanks! That is my plan too. Try to figure out the threshold now lol

Try adding --norolestats to your get_maintainer.pl invocation.

Signature · 1 line
Florian
#11 lore raw

PATCH RESEND 4/8 clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

In reply to William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make CLK_BCM_63XX depending and setting default on ARCH_BCMBCA.

---

 drivers/clk/bcm/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/bcm/Kconfig +2 -2
index ec738f74a026..77266afb1c79 100644
@@ -22,9 +22,9 @@ config CLK_BCM2835
 
 config CLK_BCM_63XX
 	bool "Broadcom BCM63xx clock support"
-	depends on ARCH_BCM_63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || COMPILE_TEST
 	select COMMON_CLK_IPROC
-	default ARCH_BCM_63XX
+	default ARCH_BCMBCA
 	help
 	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
 	  based on the ARM architecture
Signature · 1 line
2.34.1
Acked-by on v1 4/8
#12 lore raw

Re: [RESEND PATCH 4/8] clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 4 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make CLK_BCM_63XX depending and setting default on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
#15 lore raw

PATCH RESEND 5/8 i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

In reply to William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make I2C_BRCMSTB depending on ARCH_BCMBCA.

---

 drivers/i2c/busses/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/Kconfig +1 -1
index b1d7069dd377..acf2a393bd56 100644
@@ -486,7 +486,7 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
+	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
 		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
Signature · 1 line
2.34.1
Acked-by on v1 5/8
#16 lore raw

Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 5 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make I2C_BRCMSTB depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
#17 lore raw

Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 3 lines

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

That's what I assumed (and also prefer), so I acked the I2C patch. Let me know, guys, if I should pick it instead.

#19 lore raw

PATCH RESEND 6/8 phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

In reply to William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make PHY_BRCM_SATA depending on ARCH_BCMBCA.

---

 drivers/phy/broadcom/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/broadcom/Kconfig +1 -1
index 849c4204f550..93a6a8ee4716 100644
@@ -83,7 +83,7 @@ config PHY_NS2_USB_DRD
 config PHY_BRCM_SATA
 	tristate "Broadcom SATA PHY driver"
 	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
-		   ARCH_BCM_63XX || COMPILE_TEST
+		   ARCH_BCMBCA || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	default ARCH_BCM_IPROC
Signature · 1 line
2.34.1
Acked-by on v1 6/8
#20 lore raw

Re: [RESEND PATCH 6/8] phy: brcm-sata: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 5 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make PHY_BRCM_SATA depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
#22 lore raw

PATCH RESEND 7/8 spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

In reply to William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.

---

 drivers/spi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/spi/Kconfig +1 -1
index 2d034459e79f..8e550269d488 100644
@@ -183,7 +183,7 @@ config SPI_BCM63XX
 
 config SPI_BCM63XX_HSSPI
 	tristate "Broadcom BCM63XX HS SPI controller driver"
-	depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST
+	depends on BCM63XX || BMIPS_GENERIC || ARCH_BCMBCA || COMPILE_TEST
 	help
 	  This enables support for the High Speed SPI controller present on
 	  newer Broadcom BCM63XX SoCs.
Signature · 1 line
2.34.1
Acked-by on v1 7/8
#23 lore raw

Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 4 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
maintainer
#25 lore raw

Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 5 lines · Florian Fainelli
Quoted 2 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.

Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks!

I was rather hoping for an answer on what the situation with dependencies was here...

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#26 lore raw

Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 9 lines · Mark Brown
Quoted 5 lines · Florian Fainelli
Quoted 2 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SPI_BCM63XX_HSSPI depending on ARCH_BCMBCA.

Applied to https://github.com/Broadcom/stblinux/commits/drivers/next, thanks!

I was rather hoping for an answer on what the situation with dependencies was here...

Each patch is independent from one another and there are not dependencies on the Broadcom arm-soc tree(s) other than for CONFIG_ARCH_BCMBCA which was introduced with v5.19 with b32c613b3fda3e1c26119609f1ad6b19178f82f5. That said, I prefer to take all patches via the Broadcom arm-soc tree(s) to ensure a timely inclusion for our upcoming v5.20 pull request, and ensure that all drivers are converted in one release cycle.

If you want to give me your Acked-by or that I drop this and take it via the spi tree, please let me know.

Thanks!

Signature · 1 line
Florian
maintainer Acked-by
#27 lore raw

Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 9 lines · Florian Fainelli

Each patch is independent from one another and there are not dependencies on the Broadcom arm-soc tree(s) other than for CONFIG_ARCH_BCMBCA which was introduced with v5.19 with b32c613b3fda3e1c26119609f1ad6b19178f82f5. That said, I prefer to take all patches via the Broadcom arm-soc tree(s) to ensure a timely inclusion for our upcoming v5.20 pull request, and ensure that all drivers are converted in one release cycle.

If you want to give me your Acked-by or that I drop this and take it via the spi tree, please let me know.

#28 lore raw

Re: [RESEND PATCH 7/8] spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 9 lines · Mark Brown
Quoted 6 lines · Florian Fainelli

Each patch is independent from one another and there are not dependencies on the Broadcom arm-soc tree(s) other than for CONFIG_ARCH_BCMBCA which was introduced with v5.19 with b32c613b3fda3e1c26119609f1ad6b19178f82f5. That said, I prefer to take all patches via the Broadcom arm-soc tree(s) to ensure a timely inclusion for our upcoming v5.20 pull request, and ensure that all drivers are converted in one release cycle.

Quoted 4 lines
Quoted 2 lines

If you want to give me your Acked-by or that I drop this and take it via the spi tree, please let me know.

Thanks, FWIW, I had amended that patch with your ACked-by before sending it to the arm-soc maintainers.

Signature · 1 line
Florian
#29 lore raw

PATCH RESEND 8/8 tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

In reply to William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SERIAL_BCM63XX depending on ARCH_BCMBCA.

---

 drivers/tty/serial/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/tty/serial/Kconfig +2 -2
index 8a3ee1525d80..e3279544b03c 100644
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
Signature · 1 line
2.34.1
Acked-by on v1 8/8
#30 lore raw

Re: [RESEND PATCH 8/8] tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

Quoted 4 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make SERIAL_BCM63XX depending on ARCH_BCMBCA.

There is no cover letter for this 8 patch series :/ it is not clear to me whether each subsystem maintainer will be in a position to merge these patches individually, yet still have all 8 (7 of them actually, see comment to patch 1) land in 5.20.

Alternatively, we can merge these patches through the Broadcom ARM SoC pull request(s) to ensure they all land at the same time.

Signature · 1 line
Florian
#34 lore raw
In reply to William Zhang
Quoted 14 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make DEBUG_BCM63XX_UART depending on ARCH_BCMBCA.

---

  arch/arm/Kconfig.debug | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig.debug +0 -0
index 9b0aa4822d69..792796a348c3 100644

arch/arm/Kconfig.debug choice · line 277

Quoted 8 lines
arch/arm/Kconfig.debug +1 -1
@@ -271,7 +271,7 @@ choice
 
  	config DEBUG_BCM63XX_UART
  		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
  	config DEBUG_BERLIN_UART
  		bool "Marvell Berlin SoC Debug UART"

There is no such config symbol (ARCH_BCMBCA) in Linus's tree.

This patchset is going to break builds until code it depends on hits Linus's tree.

All those patches should be hold until that.

#35 lore raw
Quoted 24 lines · Rafał Miłecki
Quoted 14 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make DEBUG_BCM63XX_UART depending on ARCH_BCMBCA.

---

  arch/arm/Kconfig.debug | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig.debug +0 -0
index 9b0aa4822d69..792796a348c3 100644
@@ -271,7 +271,7 @@ choice
Quoted 6 lines

      config DEBUG_BCM63XX_UART
          bool "Kernel low-level debugging on BCM63XX UART" -        depends on ARCH_BCM_63XX
+        depends on ARCH_BCMBCA
      config DEBUG_BERLIN_UART
          bool "Marvell Berlin SoC Debug UART"

There is no such config symbol (ARCH_BCMBCA) in Linus's tree.

Quoted 3 lines

This patchset is going to break builds until code it depends on hits Linus's tree.

All those patches should be hold until that.

There is, ARCH_BCMBCA was added to arch/arm/mach-bcm/Kconfig with b32c613b3fda3 ("arm: bcmbca: add arch bcmbca machine entry") which is in v5.19-rc1 and newer:

git tag --contains b32c613b3fda3
arm-soc/for-5.19/devicetree-arm64-fixes
arm-soc/for-5.19/devicetree-fixes
arm-soc/for-5.19/drivers-fixes
arm-soc/for-5.19/maintainers-fixes
arm-soc/for-5.19/soc
arm-soc/for-5.20/defconfig
arm-soc/for-5.20/defconfig-arm64
arm-soc/for-5.20/devicetree
arm-soc/for-5.20/devicetree-arm64
arm-soc/for-5.20/drivers
arm-soc/for-5.20/maintainers
arm-soc/for-5.20/soc
ib-mfd-soc-bcm-v5.20
mips-fixes_5.19_1
mips-fixes_5.19_2
next-20220511
next-20220512
next-20220523
next-20220524
next-20220610
next-20220627
next-20220628
next-20220706
next-20220708
next-20220711
next-20220712
v5.19-rc1
v5.19-rc2
v5.19-rc3
v5.19-rc4
v5.19-rc5
v5.19-rc6

otherwise we would not have done it that way. Am I missing something?

Signature · 1 line
Florian
#36 lore raw
Quoted 25 lines · Florian Fainelli
Quoted 24 lines · Rafał Miłecki
Quoted 14 lines · William Zhang

Prepare for the BCM63138 ARCH_BCM_63XX migration to ARCH_BCMBCA. Make DEBUG_BCM63XX_UART depending on ARCH_BCMBCA.

---

  arch/arm/Kconfig.debug | 2 +-

  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/Kconfig.debug +0 -0
index 9b0aa4822d69..792796a348c3 100644
@@ -271,7 +271,7 @@ choice
Quoted 6 lines

      config DEBUG_BCM63XX_UART
          bool "Kernel low-level debugging on BCM63XX UART" -        depends on ARCH_BCM_63XX
+        depends on ARCH_BCMBCA
      config DEBUG_BERLIN_UART
          bool "Marvell Berlin SoC Debug UART"

There is no such config symbol (ARCH_BCMBCA) in Linus's tree.

Quoted 5 lines
Quoted 3 lines

This patchset is going to break builds until code it depends on hits Linus's tree.

All those patches should be hold until that.

There is, ARCH_BCMBCA was added to arch/arm/mach-bcm/Kconfig with b32c613b3fda3 ("arm: bcmbca: add arch bcmbca machine entry") which is in v5.19-rc1 and newer:

Oops, my tree updating script failed me. Sorry!

OK then, maybe this migration wasn't handled flawlessly but it's half done now and remaining things should be fixed with all pending work. Looks OK!