Add basic Rockchip rk3128 DT support
Subsystems (4)
v2 cover Add basic Rockchip rk3128 DT support
Add basic Rockchip rk3128 DT support.
Features:
Quad-core ARM Cortex-A7MP Core processor
Clock & reset unit
Power management unit
Interrupt controller
DMAC
6x 64 bits Timers
4x PWMs
1x 32 bits watchdog
Internal memory:
Internal BootRom
Internal SRAM 8KB
External memory:
Dynamic Memory Interface (DDR3/DDR3L/LPDDR2)
Nand Flash Interface
eMMC Interface
SD/MMC Interface
Connectivity:
SDIO interface
SPI Controller
3x UART controller
4x I2C controllers
4x groups of GPIO (GPIO0~GPIO3), 32 GPIOs per group USB Host2.0
USB OTG2.0
===
The Linux kernel has added a rk3128 clock driver in the past, but the DT is still missing.
In U-boot the rk3128 DT doesn't conform the latest bindings and also the pin definition don't match the TRM.
On request from the U-boot maintainers I submit a basic rk3128 DT.
https://lore.kernel.org/u-boot/[email protected]/
Based on:
https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/rk3128.dtsi
https://github.com/rockchip-linux/kernel/blob/develop-4.4/arch/arm/boot/dts/rk312x.dtsi
rk3128 TRM:
https://rockchip.fr/RK312X%20TRM/
rk3128 datasheet:
https://rockchip.fr/RK3128%20datasheet%20V1.2.pdf
===
NOT TESTED WITH HARDWARE
NO THERMAL PROTECTION
===
Request:
Help with testing on hardware.
===
Changed V2:
rk3128.dtsi:
remove aliases
add gic interrupts mask defines
add virtual timer interrupts
rk3128-evb.dts:
use generic node names
remove underscores in node names
add more aliases
sort
===
Johan Jonker (4):
dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board
dt-bindings: timer: rockchip: add rockchip,rk3128-timer
ARM: dts: rockchip: add rk3128.dtsi
ARM: dts: rockchip: add rk3128-evb.dts
.../devicetree/bindings/arm/rockchip.yaml | 5 + .../bindings/timer/rockchip,rk-timer.yaml | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3128-evb.dts | 110 +++ arch/arm/boot/dts/rk3128.dtsi | 916 ++++++++++++++++++ 5 files changed, 1033 insertions(+) create mode 100644 arch/arm/boot/dts/rk3128-evb.dts create mode 100644 arch/arm/boot/dts/rk3128.dtsi
--
2.20.1
PATCH v2 1/4 dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board
Add Rockchip RK3128 Evaluation board.
--- Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +5 -0
@@ -662,6 +662,11 @@ properties: - const: rockchip,rk3036-evb - const: rockchip,rk3036 + - description: Rockchip RK3128 Evaluation board + items: + - const: rockchip,rk3128-evb + - const: rockchip,rk3128 + - description: Rockchip RK3228 Evaluation board items: - const: rockchip,rk3228-evb
--
2.20.1
PATCH v2 2/4 dt-bindings: timer: rockchip: add rockchip,rk3128-timer
In reply to Johan JonkerAdd rockchip,rk3128-timer compatible string.
--- Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml +1 -0
@@ -18,6 +18,7 @@ properties: - enum: - rockchip,rv1108-timer - rockchip,rk3036-timer + - rockchip,rk3128-timer - rockchip,rk3188-timer - rockchip,rk3228-timer - rockchip,rk3229-timer
--
2.20.1
[tip: timers/core] dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
The following commit has been merged into the timers/core branch of tip:
The following commit has been merged into the timers/core branch of tip:
Commit-ID: 9ffa5e6b8f93ccf1a217dd12e204c1a5e211abef Gitweb: https://git.kernel.org/tip/9ffa5e6b8f93ccf1a217dd12e204c1a5e211abef Author: Johan Jonker <[email protected]> AuthorDate: Fri, 28 Oct 2022 16:41:30 +02:00 Committer: Daniel Lezcano <[email protected]> CommitterDate: Fri, 02 Dec 2022 12:48:27 +01:00
dt-bindings: timer: rockchip: Add rockchip,rk3128-timer
Add rockchip,rk3128-timer compatible string.
--- Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml +1 -0
@@ -18,6 +18,7 @@ properties: - enum: - rockchip,rv1108-timer - rockchip,rk3036-timer + - rockchip,rk3128-timer - rockchip,rk3188-timer - rockchip,rk3228-timer - rockchip,rk3229-timer
PATCH v2 3/4 ARM: dts: rockchip: add rk3128.dtsi
In reply to Johan JonkerAdd basic rk3128 support.
Features:
Quad-core ARM Cortex-A7MP Core processor
Clock & reset unit
Power management unit
Interrupt controller
DMAC
6x 64 bits Timers
4x PWMs
1x 32 bits watchdog
Internal memory:
Internal BootRom
Internal SRAM 8KB
External memory:
Dynamic Memory Interface (DDR3/DDR3L/LPDDR2)
Nand Flash Interface
eMMC Interface
SD/MMC Interface
Connectivity:
SDIO interface
SPI Controller
3x UART controller
4x I2C controllers
4x groups of GPIO (GPIO0~GPIO3), 32 GPIOs per group USB Host2.0
USB OTG2.0
---
NOT TESTED WITH HARDWARE
NO THERMAL PROTECTION
---
Changed V2:
remove aliases
add gic interrupts mask defines
add virtual timer interrupts
--- arch/arm/boot/dts/rk3128.dtsi | 916 ++++++++++++++++++++++++++++++++++ 1 file changed, 916 insertions(+) create mode 100644 arch/arm/boot/dts/rk3128.dtsi
arch/arm/boot/dts/rk3128.dtsi new file +916 -0
@@ -0,0 +1,916 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd + */ + +#include <dt-bindings/clock/rk3128-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> + +/ { + compatible = "rockchip,rk3128"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + operating-points = < + /* KHz uV */ + 816000 1000000 + >; + #cooling-cells = <2>; /* min followed by max */ + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + }; + + cpu3: cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + arm,cpu-registers-not-fw-configured; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + pmu: syscon@100a0000 { + compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd"; + reg = <0x100a0000 0x1000>; + }; + + gic: interrupt-controller@10139000 { + compatible = "arm,cortex-a7-gic"; + reg = <0x10139000 0x1000>, + <0x1013a000 0x1000>, + <0x1013c000 0x2000>, + <0x1013e000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + usb_otg: usb@10180000 { + compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2"; + reg = <0x10180000 0x40000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_OTG>; + clock-names = "otg"; + dr_mode = "otg"; + phys = <&usb2phy_otg>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb_host_ehci: usb@101c0000 { + compatible = "generic-ehci"; + reg = <0x101c0000 0x20000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + usb_host_ohci: usb@101e0000 { + compatible = "generic-ohci"; + reg = <0x101e0000 0x20000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2phy_host>; + phy-names = "usb"; + status = "disabled"; + }; + + sdmmc: mmc@10214000 { + compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x10214000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + dmas = <&pdma 10>; + dma-names = "rx-tx"; + fifo-depth = <256>; + max-frequency = <150000000>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; + status = "disabled"; + }; + + sdio: mmc@10218000 { + compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x10218000 0x4000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + dmas = <&pdma 11>; + dma-names = "rx-tx"; + fifo-depth = <256>; + max-frequency = <150000000>; + resets = <&cru SRST_SDIO>; + reset-names = "reset"; + status = "disabled"; + }; + + emmc: mmc@1021c000 { + compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x1021c000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + dmas = <&pdma 12>; + dma-names = "rx-tx"; + fifo-depth = <256>; + max-frequency = <150000000>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; + status = "disabled"; + }; + + nfc: nand-controller@10500000 { + compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc"; + reg = <0x10500000 0x4000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + pinctrl-names = "default"; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0 + &flash_dqs &flash_rdn &flash_rdy &flash_wrn>; + status = "disabled"; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3128-cru"; + reg = <0x20000000 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>; + assigned-clock-rates = <594000000>; + }; + + grf: syscon@20008000 { + compatible = "rockchip,rk3128-grf", "syscon", "simple-mfd"; + reg = <0x20008000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + usb2phy: usb2phy@17c { + compatible = "rockchip,rk3128-usb2phy"; + reg = <0x017c 0x0c>; + clocks = <&cru SCLK_OTGPHY0>; + clock-names = "phyclk"; + clock-output-names = "usb480m_phy"; + #clock-cells = <0>; + status = "disabled"; + + usb2phy_host: host-port { + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + + usb2phy_otg: otg-port { + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + }; + + timer0: timer@20044000 { + compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; + reg = <0x20044000 0x20>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + timer1: timer@20044020 { + compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; + reg = <0x20044020 0x20>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + timer2: timer@20044040 { + compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; + reg = <0x20044040 0x20>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + timer3: timer@20044060 { + compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; + reg = <0x20044060 0x20>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + timer4: timer@20044080 { + compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; + reg = <0x20044080 0x20>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + timer5: timer@200440a0 { + compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; + reg = <0x200440a0 0x20>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&xin24m>; + clock-names = "pclk", "timer"; + }; + + watchdog: watchdog@2004c000 { + compatible = "rockchip,rk3128-wdt", "snps,dw-wdt"; + reg = <0x2004c000 0x100>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_WDT>; + status = "disabled"; + }; + + pwm0: pwm@20050000 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050000 0x10>; + clocks = <&cru PCLK_PWM>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@20050010 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050010 0x10>; + clocks = <&cru PCLK_PWM>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@20050020 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050020 0x10>; + clocks = <&cru PCLK_PWM>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@20050030 { + compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm"; + reg = <0x20050030 0x10>; + clocks = <&cru PCLK_PWM>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c1: i2c@20056000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <0x20056000 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@2005a000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <0x2005a000 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@2005e000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <0x2005e000 0x1000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@20060000 { + compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; + reg = <0x20060000 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 2>, <&pdma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@20064000 { + compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; + reg = <0x20064000 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 4>, <&pdma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@20068000 { + compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart"; + reg = <0x20068000 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&pdma 6>, <&pdma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + saradc: saradc@2006c000 { + compatible = "rockchip,saradc"; + reg = <0x2006c000 0x100>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC>; + reset-names = "saradc-apb"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + i2c0: i2c@20072000 { + compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c"; + reg = <20072000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@20074000 { + compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi"; + reg = <0x20074000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&pdma 8>, <&pdma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_tx &spi0_rx &spi0_clk &spi0_cs0 &spi0_cs1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pdma: dma-controller@20078000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20078000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3128-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@2007c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2007c000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@20088000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20088000 0x100>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg-pull-default { + bias-pull-pin-default; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <1 RK_PC6 2 &pcfg_pull_default>; + }; + + emmc_cmd1: emmc-cmd1 { + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_default>; + }; + + emmc_pwr: emmc-pwr { + rockchip,pins = <2 RK_PA5 2 &pcfg_pull_default>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, + <1 RK_PD1 2 &pcfg_pull_default>, + <1 RK_PD2 2 &pcfg_pull_default>, + <1 RK_PD3 2 &pcfg_pull_default>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, + <1 RK_PD1 2 &pcfg_pull_default>, + <1 RK_PD2 2 &pcfg_pull_default>, + <1 RK_PD3 2 &pcfg_pull_default>, + <1 RK_PD4 2 &pcfg_pull_default>, + <1 RK_PD5 2 &pcfg_pull_default>, + <1 RK_PD6 2 &pcfg_pull_default>, + <1 RK_PD7 2 &pcfg_pull_default>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>, + <2 RK_PB1 3 &pcfg_pull_default>, + <2 RK_PB3 3 &pcfg_pull_default>, + <2 RK_PB4 3 &pcfg_pull_default>, + <2 RK_PB5 3 &pcfg_pull_default>, + <2 RK_PB6 3 &pcfg_pull_default>, + <2 RK_PC0 3 &pcfg_pull_default>, + <2 RK_PC1 3 &pcfg_pull_default>, + <2 RK_PC2 3 &pcfg_pull_default>, + <2 RK_PC3 3 &pcfg_pull_default>, + <2 RK_PD1 3 &pcfg_pull_default>, + <2 RK_PC4 4 &pcfg_pull_default>, + <2 RK_PC5 4 &pcfg_pull_default>, + <2 RK_PC6 4 &pcfg_pull_default>, + <2 RK_PC7 4 &pcfg_pull_default>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = <2 RK_PB0 3 &pcfg_pull_default>, + <2 RK_PB4 3 &pcfg_pull_default>, + <2 RK_PB5 3 &pcfg_pull_default>, + <2 RK_PB6 3 &pcfg_pull_default>, + <2 RK_PB7 3 &pcfg_pull_default>, + <2 RK_PC0 3 &pcfg_pull_default>, + <2 RK_PC1 3 &pcfg_pull_default>, + <2 RK_PC2 3 &pcfg_pull_default>, + <2 RK_PC3 3 &pcfg_pull_default>, + <2 RK_PD1 3 &pcfg_pull_default>; + }; + }; + + hdmi { + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>, + <0 RK_PA7 2 &pcfg_pull_none>; + }; + + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, + <0 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, + <0 RK_PA3 1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>, + <2 RK_PC5 3 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>, + <0 RK_PA7 1 &pcfg_pull_none>; + }; + }; + + i2s { + i2s_bus: i2s-bus { + rockchip,pins = <0 RK_PB0 1 &pcfg_pull_none>, + <0 RK_PB1 1 &pcfg_pull_none>, + <0 RK_PB3 1 &pcfg_pull_none>, + <0 RK_PB4 1 &pcfg_pull_none>, + <0 RK_PB5 1 &pcfg_pull_none>, + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s1_bus: i2s1-bus { + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_none>, + <1 RK_PA1 1 &pcfg_pull_none>, + <1 RK_PA2 1 &pcfg_pull_none>, + <1 RK_PA3 1 &pcfg_pull_none>, + <1 RK_PA4 1 &pcfg_pull_none>, + <1 RK_PA5 1 &pcfg_pull_none>; + }; + }; + + lcdc { + lcdc_dclk: lcdc-dclk { + rockchip,pins = <2 RK_PB0 1 &pcfg_pull_none>; + }; + + lcdc_den: lcdc-den { + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_none>; + }; + + lcdc_hsync: lcdc-hsync { + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_none>; + }; + + lcdc_vsync: lcdc-vsync { + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_none>; + }; + + lcdc_rgb24: lcdc-rgb24 { + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_none>, + <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>, + <2 RK_PB7 1 &pcfg_pull_none>, + <2 RK_PC0 1 &pcfg_pull_none>, + <2 RK_PC1 1 &pcfg_pull_none>, + <2 RK_PC2 1 &pcfg_pull_none>, + <2 RK_PC3 1 &pcfg_pull_none>, + <2 RK_PC4 1 &pcfg_pull_none>, + <2 RK_PC5 1 &pcfg_pull_none>, + <2 RK_PC6 1 &pcfg_pull_none>, + <2 RK_PC7 1 &pcfg_pull_none>, + <2 RK_PD0 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>; + }; + }; + + nfc { + flash_ale:flash-ale { + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>; + }; + + flash_cle:flash-cle { + rockchip,pins = <2 RK_PA1 1 &pcfg_pull_none>; + }; + + flash_wrn:flash-wrn { + rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>; + }; + + flash_rdn:flash-rdn { + rockchip,pins = <2 RK_PA3 1 &pcfg_pull_none>; + }; + + flash_rdy:flash-rdy { + rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>; + }; + + flash_cs0:flash-cs0 { + rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>; + }; + + flash_dqs:flash-dqs { + rockchip,pins = <2 RK_PA7 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>, + <1 RK_PD1 1 &pcfg_pull_none>, + <1 RK_PD2 1 &pcfg_pull_none>, + <1 RK_PD3 1 &pcfg_pull_none>, + <1 RK_PD4 1 &pcfg_pull_none>, + <1 RK_PD5 1 &pcfg_pull_none>, + <1 RK_PD6 1 &pcfg_pull_none>, + <1 RK_PD7 1 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <0 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <3 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = <1 RK_PA0 2 &pcfg_pull_none>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = <0 RK_PA3 2 &pcfg_pull_default>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_default>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = <1 RK_PA1 2 &pcfg_pull_default>, + <1 RK_PA2 2 &pcfg_pull_default>, + <1 RK_PA4 2 &pcfg_pull_default>, + <1 RK_PA5 2 &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; + }; + + sdmmc_wp: sdmmc-wp { + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_default>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>, + <1 RK_PC3 1 &pcfg_pull_default>, + <1 RK_PC4 1 &pcfg_pull_default>, + <1 RK_PC5 1 &pcfg_pull_default>; + }; + }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>; + }; + + spi0_cs0: spi0-cs0 { + rockchip,pins = <1 RK_PB3 1 &pcfg_pull_default>; + }; + + spi0_tx: spi0-tx { + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_default>; + }; + + spi0_rx: spi0-rx { + rockchip,pins = <1 RK_PB2 1 &pcfg_pull_default>; + }; + + spi0_cs1: spi0-cs1 { + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_default>; + }; + + spi1_clk: spi1-clk { + rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>; + }; + + spi1_cs0: spi1-cs0 { + rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>; + }; + + spi1_tx: spi1-tx { + rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>; + }; + + spi1_rx: spi1-rx { + rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>; + }; + + spi1_cs1: spi1-cs1 { + rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>; + }; + + spi2_clk: spi2-clk { + rockchip,pins = <0 RK_PB1 2 &pcfg_pull_default>; + }; + + spi2_cs0: spi2-cs0 { + rockchip,pins = <0 RK_PB6 2 &pcfg_pull_default>; + }; + + spi2_tx: spi2-tx { + rockchip,pins = <0 RK_PB3 2 &pcfg_pull_default>; + }; + + spi2_rx: spi2-rx { + rockchip,pins = <0 RK_PB5 2 &pcfg_pull_default>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <2 RK_PD2 2 &pcfg_pull_default>, + <2 RK_PD3 2 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <2 RK_PD5 2 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <0 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 RK_PB1 2 &pcfg_pull_default>, + <1 RK_PB2 2 &pcfg_pull_default>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 RK_PB0 2 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>, + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + uart2_cts: uart2-cts { + rockchip,pins = <0 RK_PD1 1 &pcfg_pull_none>; + }; + + uart2_rts: uart2-rts { + rockchip,pins = <0 RK_PD0 1 &pcfg_pull_none>; + }; + }; + }; +};
--
2.20.1
PATCH v2 4/4 ARM: dts: rockchip: add rk3128-evb.dts
In reply to Johan JonkerAdd rk3128-evb.dts
---
Changed V2:
use generic node names
remove underscores in node names
add more aliases
sort
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3128-evb.dts | 110 +++++++++++++++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 arch/arm/boot/dts/rk3128-evb.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1127,6 +1127,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-marsboard.dtb \ rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ + rk3128-evb.dtb \ rk3188-bqedison2qc.dtb \ rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \
arch/arm/boot/dts/rk3128-evb.dts new file +110 -0
110 lines not on this page · raw message
--
2.20.1
Heiko Stuebner
maintainerRe: (subset) [PATCH v2 0/4] Add basic Rockchip rk3128 DT support
In reply to Johan JonkerQuoted 12 lines · Johan Jonker
Add basic Rockchip rk3128 DT support.
Features:
Quad-core ARM Cortex-A7MP Core processor
Clock & reset unit
Power management unit
Interrupt controller
DMAC
6x 64 bits Timers
4x PWMs
1x 32 bits watchdog
Quoted 1 line
[...]
Applied for 6.3, thanks!
[1/4] dt-bindings: arm: rockchip: Add Rockchip RK3128 Evaluation board
commit: a1392d5ac60864a3682c447fe62392eb56e9d93b
[3/4] ARM: dts: rockchip: add rk3128.dtsi
commit: 9ef609cbdbf7a45599b0c9c21e9e7d2ae625896f
[4/4] ARM: dts: rockchip: add rk3128-evb.dts
commit: 7232dafab89ac23b570d0adb3402164719fcbe3dBest regards,
Signature · 1 line
Heiko Stuebner <[email protected]>