Skip to contentSkip to conversation

acpi: refactor error prone build_header() and packed structures usage in ACPI tables

PATCH Superseded Igor Mammedov 3 participants 79 messages Sep 7, 2021 – Sep 23, 2021

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover acpi: refactor error prone build_header() and packed structures usage in ACPI tables

v3:
1. s/acpi_init_table()|acpi_table_composed()/acpi_table_begin()|acpi_table_end()/
2. arm:madt fix incorrect length
3. various comment improvments
4. rewrite IORT conversion patch due to heavy conflicts with bypass iommu code merged recently
5 pick up Eric's Reviewed-By where there wasn't significant change (1)

v2:
- drop test related patches, they will be sent as a separate series
- fix bios_loader pointer initialization ordering when using TPM1.2
- extend commit message of [1/35] and add extra comment about table length patching

Highlights:
* drop pointer arithmetic in ACPI tables code
* use endian agnostic API
* simplifies review of tables. /in most cases just line by line comparision with spec/

Series replaces build_header() with acpi_table_begin()/acpi_table_end() API that hides pointer/offset arithmetic from user, to prevent errors caused by it [1].
While doing above, it was necessary to split table header from packed structure that was describing the table, which is counter-productive since it still leaves packed structure drawbacks. So that sort of forced me to rewrite tables that were composed with help of packed structures to preferred build_append_int_noprefix() API. In cases where refactoring to build_append_int_noprefix() was small, it was squashed with acpi_table_begin()/acpi_table_end() patch. Conversion reduced code size quite a bit despite me adding doc comments for every table row.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

Link to repo with this series and tests to validate it:
https://gitlab.com/imammedo/qemu/-/commits/acpi_build_header_refactoring_v3

Previous v2 revision can be found at:
https://www.mail-archive.com/[email protected]/msg822151.html

Igor Mammedov (35):
acpi: add helper routines to initialize ACPI tables
acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: use build_append_int_noprefix() API to compose SRAT table
acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: x86: remove dead code
acpi: x86: set enabled when composing _MAT entries
acpi: x86: madt: use build_append_int_noprefix() API to compose MADT
table
acpi: arm/virt: madt: use build_append_int_noprefix() API to compose
MADT table
acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm/virt: convert build_iort() to endian agnostic
build_append_FOO() API
acpi: arm/virt: build_spcr: fix invalid cast
acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: build_facs: use build_append_int_noprefix() API to compose table
acpi: remove no longer used build_header()
acpi: AcpiGenericAddress no longer used to map/access fields of MMIO,
drop packed attribute

 include/hw/acpi/acpi-defs.h          | 528 +-----------------------
 include/hw/acpi/acpi_dev_interface.h |   3 +-
 include/hw/acpi/aml-build.h          |  38 +-
 include/hw/i386/pc.h                 |   6 +-
 hw/acpi/acpi-x86-stub.c              |   3 +-
 hw/acpi/aml-build.c                  | 197 +++++----
 hw/acpi/cpu.c                        |  17 +-
 hw/acpi/ghes.c                       |  10 +-
 hw/acpi/hmat.c                       |  14 +-
 hw/acpi/nvdimm.c                     |  64 ++-
 hw/acpi/pci.c                        |  18 +-
 hw/acpi/vmgenid.c                    |  16 +-
 hw/arm/virt-acpi-build.c             | 577 +++++++++++++++------------
 hw/i386/acpi-build.c                 | 304 +++++++-------
 hw/i386/acpi-common.c                | 158 ++++----
 hw/i386/acpi-microvm.c               |  13 +-
 16 files changed, 798 insertions(+), 1168 deletions(-)
Signature · 1 line
2.27.0
#1 lore raw

PATCH v3 1/35 acpi: add helper routines to initialize ACPI tables

Patch introduces acpi_table_begin()/ acpi_table_end() API that hides pointer/offset arithmetic from user as opposed to build_header(), to prevent errors caused by it [1].

acpi_table_begin():
initializes table header and keeps track of table data/offsets
acpi_table_end():
sets actual table length and tells bios loader where table is for the later initialization on guest side.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/aml-build.h | 31 +++++++++++++++++++
 hw/acpi/aml-build.c         | 62 +++++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
include/hw/acpi/aml-build.h +31 -0
index 471266d739..4242382399 100644
@@ -413,6 +413,37 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
 Aml *aml_object_type(Aml *object);
 
 void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+
+typedef struct AcpiTable {
+    const char *sig;
+    const uint8_t rev;
+    const char *oem_id;
+    const char *oem_table_id;
+    /* private vars tracking table state */
+    GArray *array;
+    unsigned table_offset;
+} AcpiTable;
+
+/**
+ * acpi_table_begin:
+ * initializes table header and keeps track of
+ * table data/offsets
+ * @desc: ACPI table descriptor
+ * @array: blob where the ACPI table will be composed/stored.
+ */
+void acpi_table_begin(AcpiTable *desc, GArray *array);
+
+/**
+ * acpi_table_end:
+ * sets actual table length and tells bios loader
+ * where table is for the later initialization on
+ * guest side.
+ * @linker: reference to BIOSLinker object to use for the table
+ * @table: ACPI table descriptor that was used with @acpi_table_begin
+ * counterpart
+ */
+void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
+
 void
 build_header(BIOSLinker *linker, GArray *table_data,
              AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
hw/acpi/aml-build.c +62 -0

74 lines not on this page · raw message

Signature · 1 line
2.27.0
Reviewed-by on v3 1/35
#2 lore raw

Re: [PATCH v3 01/35] acpi: add helper routines to initialize ACPI tables

Hi Igor,

Quoted 137 lines · Igor Mammedov

Patch introduces acpi_table_begin()/ acpi_table_end() API that hides pointer/offset arithmetic from user as opposed to build_header(), to prevent errors caused by it [1].

acpi_table_begin():
initializes table header and keeps track of table data/offsets
acpi_table_end():
sets actual table length and tells bios loader where table is for the later initialization on guest side.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/aml-build.h | 31 +++++++++++++++++++
 hw/acpi/aml-build.c         | 62 +++++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
include/hw/acpi/aml-build.h +31 -0
index 471266d739..4242382399 100644
@@ -413,6 +413,37 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
 Aml *aml_object_type(Aml *object);
 
 void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+
+typedef struct AcpiTable {
+    const char *sig;
+    const uint8_t rev;
+    const char *oem_id;
+    const char *oem_table_id;
+    /* private vars tracking table state */
+    GArray *array;
+    unsigned table_offset;
+} AcpiTable;
+
+/**
+ * acpi_table_begin:
+ * initializes table header and keeps track of
+ * table data/offsets
+ * @desc: ACPI table descriptor
+ * @array: blob where the ACPI table will be composed/stored.
+ */
+void acpi_table_begin(AcpiTable *desc, GArray *array);
+
+/**
+ * acpi_table_end:
+ * sets actual table length and tells bios loader
+ * where table is for the later initialization on
+ * guest side.
+ * @linker: reference to BIOSLinker object to use for the table
+ * @table: ACPI table descriptor that was used with @acpi_table_begin
+ * counterpart
+ */
+void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
+
 void
 build_header(BIOSLinker *linker, GArray *table_data,
              AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
hw/acpi/aml-build.c +55 -0
index d5103e6d7b..229a3eb654 100644
@@ -52,6 +52,19 @@ static void build_append_byte(GArray *array, uint8_t val)
     g_array_append_val(array, val);
 }
 
+static void build_append_padded_str(GArray *array, const char *str,
+                                    size_t maxlen, char pad)
+{
+    size_t i;
+    size_t len = strlen(str);
+
+    g_assert(len <= maxlen);
+    g_array_append_vals(array, str, len);
+    for (i = maxlen - len; i > 0; i--) {
+        g_array_append_val(array, pad);
+    }
+}
+
 static void build_append_array(GArray *array, GArray *val)
 {
     g_array_append_vals(array, val->data, val->len);
@@ -1692,6 +1705,55 @@ Aml *aml_object_type(Aml *object)
     return var;
 }
 
+void acpi_table_begin(AcpiTable *desc, GArray *array)
+{
+
+    desc->array = array;
+    desc->table_offset = array->len;
+
+    /*
+     * ACPI spec 1.0b
+     * 5.2.3 System Description Table Header
+     */
+    g_assert(strlen(desc->sig) == 4);
+    g_array_append_vals(array, desc->sig, 4); /* Signature */
+    /*
+     * reserve space for Length field, which will be patched by
+     * acpi_table_end() when the table creation is finished.
+     */
+    build_append_int_noprefix(array, 0, 4); /* Length */
+    build_append_int_noprefix(array, desc->rev, 1); /* Revision */
+    build_append_int_noprefix(array, 0, 1); /* Checksum */
+    build_append_padded_str(array, desc->oem_id, 6, ' '); /* OEMID */
+    /* OEM Table ID */
+    build_append_padded_str(array, desc->oem_table_id, 8, ' ');
+    build_append_int_noprefix(array, 1, 4); /* OEM Revision */
+    g_array_append_vals(array, ACPI_BUILD_APPNAME8, 4); /* Creator ID */
+    build_append_int_noprefix(array, 1, 4); /* Creator Revision */
+}
+
+void acpi_table_end(BIOSLinker *linker, AcpiTable *desc)
+{
+    /*
+     * ACPI spec 1.0b
+     * 5.2.3 System Description Table Header
+     * Table 5-2 DESCRIPTION_HEADER Fields
+     */
+    const unsigned checksum_offset = 9;
+    uint32_t table_len = desc->array->len - desc->table_offset;
+    uint32_t table_len_le = cpu_to_le32(table_len);
+    gchar *len_ptr = &desc->array->data[desc->table_offset + 4];
+
+    /* patch "Length" field that has been reserved by acpi_table_begin()
+     * to the actual length, i.e. accumulated table length from
+     * acpi_table_begin() till acpi_table_end()

hw/acpi/aml-build.c Aml *aml_object_type(Aml *object) · line 1759

Quoted 10 lines
hw/acpi/aml-build.c +7 -0
+     */
+    memcpy(len_ptr, &table_len_le, sizeof table_len_le);
+
+    bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
+        desc->table_offset, table_len, desc->table_offset + checksum_offset);
+}
+
 void
 build_header(BIOSLinker *linker, GArray *table_data,
              AcpiTableHeader *h, const char *sig, int len, uint8_t rev,

Eric

#3 lore raw

PATCH v3 2/35 acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offests magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 27 ++++++++++++---------------
 2 files changed, 12 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -10
index cf9f44299c..ccfa3382aa 100644
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
-/*
- * ACPI 1.0 Root System Description Table (RSDT)
- */
-struct AcpiRsdtDescriptorRev1 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint32_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiRsdtDescriptorRev1 AcpiRsdtDescriptorRev1;
-
 /*
  * ACPI 2.0 eXtended System Description Table (XSDT)
  */
hw/acpi/aml-build.c +12 -15
index 229a3eb654..32f14d4a78 100644
@@ -1890,27 +1890,24 @@ build_rsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned rsdt_entries_offset;
-    AcpiRsdtDescriptorRev1 *rsdt;
-    int rsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint32_t) * table_offsets->len);
-    const unsigned rsdt_entry_size = sizeof(rsdt->table_offset_entry[0]);
-    const size_t rsdt_len = sizeof(*rsdt) + table_data_len;
-
-    rsdt = acpi_data_push(table_data, rsdt_len);
-    rsdt_entries_offset = (char *)rsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "RSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
     for (i = 0; i < table_offsets->len; ++i) {
         uint32_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint32_t rsdt_entry_offset = rsdt_entries_offset + rsdt_entry_size * i;
+        uint32_t rsdt_entry_offset = table.array->len;
+
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 4);
 
-        /* rsdt->table_offset_entry to be filled by Guest linker */
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, rsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, 4,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
+
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + rsdt_start),
-                 "RSDT", rsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* Build xsdt table */
Signature · 1 line
2.27.0
Reviewed-by on v3 2/35
#4 lore raw

Re: [PATCH v3 02/35] acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

Hi,

Quoted 23 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offests magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 27 ++++++++++++---------------
 2 files changed, 12 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -0
index cf9f44299c..ccfa3382aa 100644

include/hw/acpi/acpi-defs.h struct AcpiSerialPortConsoleRedirection { · line 153

Quoted 5 lines
include/hw/acpi/acpi-defs.h +0 -2
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
-/*
- * ACPI 1.0 Root System Description Table (RSDT)

nit: you may move that comment to aml-build.c

Eric

Quoted 56 lines
include/hw/acpi/acpi-defs.h +0 -8
- */
-struct AcpiRsdtDescriptorRev1 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint32_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiRsdtDescriptorRev1 AcpiRsdtDescriptorRev1;
-
 /*
  * ACPI 2.0 eXtended System Description Table (XSDT)
  */
hw/acpi/aml-build.c +12 -15
index 229a3eb654..32f14d4a78 100644
@@ -1890,27 +1890,24 @@ build_rsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned rsdt_entries_offset;
-    AcpiRsdtDescriptorRev1 *rsdt;
-    int rsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint32_t) * table_offsets->len);
-    const unsigned rsdt_entry_size = sizeof(rsdt->table_offset_entry[0]);
-    const size_t rsdt_len = sizeof(*rsdt) + table_data_len;
-
-    rsdt = acpi_data_push(table_data, rsdt_len);
-    rsdt_entries_offset = (char *)rsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "RSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
     for (i = 0; i < table_offsets->len; ++i) {
         uint32_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint32_t rsdt_entry_offset = rsdt_entries_offset + rsdt_entry_size * i;
+        uint32_t rsdt_entry_offset = table.array->len;
+
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 4);
 
-        /* rsdt->table_offset_entry to be filled by Guest linker */
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, rsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, 4,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
+
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + rsdt_start),
-                 "RSDT", rsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* Build xsdt table */
#5 lore raw

Re: [PATCH v3 02/35] acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 29 lines · On Mon, 20 Sep 2021 18:21:22 +0200 Eric Auger <[email protected]> wrote:

Hi,

Quoted 26 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offests magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 27 ++++++++++++---------------
 2 files changed, 12 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -0
index cf9f44299c..ccfa3382aa 100644
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
Quoted 3 lines

include/hw/acpi/acpi-defs.h struct AcpiSerialPortConsoleRedirection { · line 153

Quoted 2 lines
include/hw/acpi/acpi-defs.h +0 -2
-/*
- * ACPI 1.0 Root System Description Table (RSDT)  

nit: you may move that comment to aml-build.c

yep, existing build_rsdt/build_xsdt are missing expected spec reference comment. I'll post an additional patch to fix it.

Quoted 2 lines

Thanks!

Quoted 59 lines

Eric

Quoted 56 lines
include/hw/acpi/acpi-defs.h +0 -8
- */
-struct AcpiRsdtDescriptorRev1 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint32_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiRsdtDescriptorRev1 AcpiRsdtDescriptorRev1;
-
 /*
  * ACPI 2.0 eXtended System Description Table (XSDT)
  */
hw/acpi/aml-build.c +12 -15
index 229a3eb654..32f14d4a78 100644
@@ -1890,27 +1890,24 @@ build_rsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned rsdt_entries_offset;
-    AcpiRsdtDescriptorRev1 *rsdt;
-    int rsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint32_t) * table_offsets->len);
-    const unsigned rsdt_entry_size = sizeof(rsdt->table_offset_entry[0]);
-    const size_t rsdt_len = sizeof(*rsdt) + table_data_len;
-
-    rsdt = acpi_data_push(table_data, rsdt_len);
-    rsdt_entries_offset = (char *)rsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "RSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
     for (i = 0; i < table_offsets->len; ++i) {
         uint32_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint32_t rsdt_entry_offset = rsdt_entries_offset + rsdt_entry_size * i;
+        uint32_t rsdt_entry_offset = table.array->len;
+
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 4);
 
-        /* rsdt->table_offset_entry to be filled by Guest linker */
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, rsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, 4,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
+
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + rsdt_start),
-                 "RSDT", rsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* Build xsdt table */
#6 lore raw

PATCH v3 3/35 acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 27 ++++++++++++---------------
 2 files changed, 12 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -10
index ccfa3382aa..f6d2ca172b 100644
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
-/*
- * ACPI 2.0 eXtended System Description Table (XSDT)
- */
-struct AcpiXsdtDescriptorRev2 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint64_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiXsdtDescriptorRev2 AcpiXsdtDescriptorRev2;
-
 /*
  * ACPI 1.0 Firmware ACPI Control Structure (FACS)
  */
hw/acpi/aml-build.c +12 -15
index 32f14d4a78..daefc132f3 100644
@@ -1916,27 +1916,24 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned xsdt_entries_offset;
-    AcpiXsdtDescriptorRev2 *xsdt;
-    int xsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint64_t) * table_offsets->len);
-    const unsigned xsdt_entry_size = sizeof(xsdt->table_offset_entry[0]);
-    const size_t xsdt_len = sizeof(*xsdt) + table_data_len;
-
-    xsdt = acpi_data_push(table_data, xsdt_len);
-    xsdt_entries_offset = (char *)xsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "XSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
+
     for (i = 0; i < table_offsets->len; ++i) {
         uint64_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint64_t xsdt_entry_offset = xsdt_entries_offset + xsdt_entry_size * i;
+        uint64_t xsdt_entry_offset = table.array->len;
 
-        /* xsdt->table_offset_entry to be filled by Guest linker */
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 8);
+
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, xsdt_entry_offset, xsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, xsdt_entry_offset, 8,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + xsdt_start),
-                 "XSDT", xsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
Signature · 1 line
2.27.0
Reviewed-by on v3 3/35
#7 lore raw

Re: [PATCH v3 03/35] acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

Hi,

Quoted 23 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 27 ++++++++++++---------------
 2 files changed, 12 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -0
index ccfa3382aa..f6d2ca172b 100644

include/hw/acpi/acpi-defs.h struct AcpiSerialPortConsoleRedirection { · line 153

Quoted 5 lines
include/hw/acpi/acpi-defs.h +0 -2
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
-/*
- * ACPI 2.0 eXtended System Description Table (XSDT)

nit: you may move that comment to aml-build.c

Eric

Quoted 56 lines
include/hw/acpi/acpi-defs.h +0 -8
- */
-struct AcpiXsdtDescriptorRev2 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint64_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiXsdtDescriptorRev2 AcpiXsdtDescriptorRev2;
-
 /*
  * ACPI 1.0 Firmware ACPI Control Structure (FACS)
  */
hw/acpi/aml-build.c +12 -15
index 32f14d4a78..daefc132f3 100644
@@ -1916,27 +1916,24 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned xsdt_entries_offset;
-    AcpiXsdtDescriptorRev2 *xsdt;
-    int xsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint64_t) * table_offsets->len);
-    const unsigned xsdt_entry_size = sizeof(xsdt->table_offset_entry[0]);
-    const size_t xsdt_len = sizeof(*xsdt) + table_data_len;
-
-    xsdt = acpi_data_push(table_data, xsdt_len);
-    xsdt_entries_offset = (char *)xsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "XSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
+
     for (i = 0; i < table_offsets->len; ++i) {
         uint64_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint64_t xsdt_entry_offset = xsdt_entries_offset + xsdt_entry_size * i;
+        uint64_t xsdt_entry_offset = table.array->len;
 
-        /* xsdt->table_offset_entry to be filled by Guest linker */
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 8);
+
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, xsdt_entry_offset, xsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, xsdt_entry_offset, 8,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + xsdt_start),
-                 "XSDT", xsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
#8 lore raw

PATCH v3 4/35 acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
hw/acpi/aml-build.c +5 -8
index daefc132f3..e54face23d 100644
@@ -1954,11 +1954,12 @@ void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                 const char *oem_id, const char *oem_table_id)
 {
-    int slit_start, i, j;
-    slit_start = table_data->len;
+    int i, j;
     int nb_numa_nodes = ms->numa_state->num_nodes;
+    AcpiTable table = { .sig = "SLIT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     build_append_int_noprefix(table_data, nb_numa_nodes, 8);
     for (i = 0; i < nb_numa_nodes; i++) {
@@ -1969,11 +1970,7 @@ void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                                       1);
         }
     }
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + slit_start),
-                 "SLIT",
-                 table_data->len - slit_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* build rev1/rev3/rev5.1 FADT */
Signature · 1 line
2.27.0
Reviewed-by on v3 4/35
#9 lore raw

Re: [PATCH v3 04/35] acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 5 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Eric

Quoted 41 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
hw/acpi/aml-build.c +5 -8
index daefc132f3..e54face23d 100644
@@ -1954,11 +1954,12 @@ void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                 const char *oem_id, const char *oem_table_id)
 {
-    int slit_start, i, j;
-    slit_start = table_data->len;
+    int i, j;
     int nb_numa_nodes = ms->numa_state->num_nodes;
+    AcpiTable table = { .sig = "SLIT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     build_append_int_noprefix(table_data, nb_numa_nodes, 8);
     for (i = 0; i < nb_numa_nodes; i++) {
@@ -1969,11 +1970,7 @@ void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                                       1);
         }
     }
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + slit_start),
-                 "SLIT",
-                 table_data->len - slit_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* build rev1/rev3/rev5.1 FADT */
#10 lore raw

PATCH v3 5/35 acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
hw/acpi/aml-build.c +7 -7
index e54face23d..dbf3ffe889 100644
@@ -1978,9 +1978,10 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
                 const char *oem_id, const char *oem_table_id)
 {
     int off;
-    int fadt_start = tbl->len;
+    AcpiTable table = { .sig = "FACP", .rev = f->rev,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    acpi_data_push(tbl, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, tbl);
 
     /* FACS address to be filled by Guest linker at runtime */
     off = tbl->len;
@@ -2044,7 +2045,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     build_append_int_noprefix(tbl, f->flags, 4); /* Flags */
 
     if (f->rev == 1) {
-        goto build_hdr;
+        goto done;
     }
 
     build_append_gas_from_struct(tbl, &f->reset_reg); /* RESET_REG */
@@ -2081,7 +2082,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     build_append_gas(tbl, AML_AS_SYSTEM_MEMORY, 0 , 0, 0, 0); /* X_GPE1_BLK */
 
     if (f->rev <= 4) {
-        goto build_hdr;
+        goto done;
     }
 
     /* SLEEP_CONTROL_REG */
@@ -2092,9 +2093,8 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     /* TODO: extra fields need to be added to support revisions above rev5 */
     assert(f->rev == 5);
 
-build_hdr:
-    build_header(linker, tbl, (void *)(tbl->data + fadt_start),
-                 "FACP", tbl->len - fadt_start, f->rev, oem_id, oem_table_id);
+done:
+    acpi_table_end(linker, &table);
 }
 
 #ifdef CONFIG_TPM
Signature · 1 line
2.27.0
Reviewed-by on v3 5/35
#11 lore raw

Re: [PATCH v3 05/35] acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 5 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Eric

Quoted 55 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
hw/acpi/aml-build.c +7 -7
index e54face23d..dbf3ffe889 100644
@@ -1978,9 +1978,10 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
                 const char *oem_id, const char *oem_table_id)
 {
     int off;
-    int fadt_start = tbl->len;
+    AcpiTable table = { .sig = "FACP", .rev = f->rev,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    acpi_data_push(tbl, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, tbl);
 
     /* FACS address to be filled by Guest linker at runtime */
     off = tbl->len;
@@ -2044,7 +2045,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     build_append_int_noprefix(tbl, f->flags, 4); /* Flags */
 
     if (f->rev == 1) {
-        goto build_hdr;
+        goto done;
     }
 
     build_append_gas_from_struct(tbl, &f->reset_reg); /* RESET_REG */
@@ -2081,7 +2082,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     build_append_gas(tbl, AML_AS_SYSTEM_MEMORY, 0 , 0, 0, 0); /* X_GPE1_BLK */
 
     if (f->rev <= 4) {
-        goto build_hdr;
+        goto done;
     }
 
     /* SLEEP_CONTROL_REG */
@@ -2092,9 +2093,8 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     /* TODO: extra fields need to be added to support revisions above rev5 */
     assert(f->rev == 5);
 
-build_hdr:
-    build_header(linker, tbl, (void *)(tbl->data + fadt_start),
-                 "FACP", tbl->len - fadt_start, f->rev, oem_id, oem_table_id);
+done:
+    acpi_table_end(linker, &table);
 }
 
 #ifdef CONFIG_TPM
#12 lore raw

PATCH v3 6/35 acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
hw/acpi/aml-build.c +5 -6
index dbf3ffe889..5e8bfb631c 100644
@@ -2107,13 +2107,14 @@ void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                 const char *oem_id, const char *oem_table_id)
 {
     uint8_t start_method_params[12] = {};
-    unsigned log_addr_offset, tpm2_start;
+    unsigned log_addr_offset;
     uint64_t control_area_start_address;
     TPMIf *tpmif = tpm_find();
     uint32_t start_method;
+    AcpiTable table = { .sig = "TPM2", .rev = 4,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    tpm2_start = table_data->len;
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     /* Platform Class */
     build_append_int_noprefix(table_data, TPM2_ACPI_CLASS_CLIENT, 2);
@@ -2151,9 +2152,7 @@ void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
                                    log_addr_offset, 8,
                                    ACPI_BUILD_TPMLOG_FILE, 0);
-    build_header(linker, table_data,
-                 (void *)(table_data->data + tpm2_start),
-                 "TPM2", table_data->len - tpm2_start, 4, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 #endif
 
Signature · 1 line
2.27.0
#13 lore raw

PATCH v3 7/35 acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/ghes.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/acpi/ghes.c +4 -6
index a749b84d62..45d9a809cc 100644
@@ -362,18 +362,16 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
 void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
-    uint64_t hest_start = table_data->len;
+    AcpiTable table = { .sig = "HEST", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    /* Hardware Error Source Table header*/
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
     build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-
     build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
 
-    build_header(linker, table_data, (void *)(table_data->data + hest_start),
-                 "HEST", table_data->len - hest_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
Signature · 1 line
2.27.0
Reviewed-by on v3 7/35
#14 lore raw

Re: [PATCH v3 07/35] acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 6 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Eric

Quoted 40 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/ghes.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/acpi/ghes.c +4 -6
index a749b84d62..45d9a809cc 100644
@@ -362,18 +362,16 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
 void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
-    uint64_t hest_start = table_data->len;
+    AcpiTable table = { .sig = "HEST", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    /* Hardware Error Source Table header*/
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
     build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-
     build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
 
-    build_header(linker, table_data, (void *)(table_data->data + hest_start),
-                 "HEST", table_data->len - hest_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
#15 lore raw

PATCH v3 8/35 acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/pci.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
hw/acpi/pci.c +9 -9
index 75b1103ec4..20b70dcd81 100644
@@ -28,19 +28,20 @@
 #include "hw/acpi/pci.h"
 #include "hw/pci/pcie_host.h"
 
+/*
+ * PCI Firmware Specification, Revision 3.0
+ * 4.1.2 MCFG Table Description.
+ */
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
                 const char *oem_id, const char *oem_table_id)
 {
-    int mcfg_start = table_data->len;
+    AcpiTable table = { .sig = "MCFG", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
 
-    /*
-     * PCI Firmware Specification, Revision 3.0
-     * 4.1.2 MCFG Table Description.
-     */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
     /* Reserved */
     build_append_int_noprefix(table_data, 0, 8);
-
     /*
      * Memory Mapped Enhanced Configuration Space Base Address Allocation
      * Structure
@@ -56,6 +57,5 @@ void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
     /* Reserved */
     build_append_int_noprefix(table_data, 0, 4);
 
-    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
-                 "MCFG", table_data->len - mcfg_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
Signature · 1 line
2.27.0
Reviewed-by on v3 8/35
#16 lore raw

Re: [PATCH v3 08/35] acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 5 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Eric

Quoted 48 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/pci.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
hw/acpi/pci.c +9 -9
index 75b1103ec4..20b70dcd81 100644
@@ -28,19 +28,20 @@
 #include "hw/acpi/pci.h"
 #include "hw/pci/pcie_host.h"
 
+/*
+ * PCI Firmware Specification, Revision 3.0
+ * 4.1.2 MCFG Table Description.
+ */
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
                 const char *oem_id, const char *oem_table_id)
 {
-    int mcfg_start = table_data->len;
+    AcpiTable table = { .sig = "MCFG", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
 
-    /*
-     * PCI Firmware Specification, Revision 3.0
-     * 4.1.2 MCFG Table Description.
-     */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
     /* Reserved */
     build_append_int_noprefix(table_data, 0, 8);
-
     /*
      * Memory Mapped Enhanced Configuration Space Base Address Allocation
      * Structure
@@ -56,6 +57,5 @@ void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
     /* Reserved */
     build_append_int_noprefix(table_data, 0, 4);
 
-    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
-                 "MCFG", table_data->len - mcfg_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
#17 lore raw

PATCH v3 9/35 acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header while previous acpi_data_push() reserved the header + 4 bytes field, add 4 bytes 'Reserved' field into hmat_build_table_structs() which didn have it.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/hmat.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
hw/acpi/hmat.c +6 -8
index edb3fd91b2..6913ebf730 100644
@@ -200,6 +200,8 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *numa_state)
     HMAT_LB_Info *hmat_lb;
     NumaHmatCacheOptions *hmat_cache;
 
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+
     for (i = 0; i < numa_state->num_nodes; i++) {
         flags = 0;
 
@@ -256,14 +258,10 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *numa_state)
 void build_hmat(GArray *table_data, BIOSLinker *linker, NumaState *numa_state,
                 const char *oem_id, const char *oem_table_id)
 {
-    int hmat_start = table_data->len;
-
-    /* reserve space for HMAT header  */
-    acpi_data_push(table_data, 40);
+    AcpiTable table = { .sig = "HMAT", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     hmat_build_table_structs(table_data, numa_state);
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + hmat_start),
-                 "HMAT", table_data->len - hmat_start, 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
Signature · 1 line
2.27.0
Reviewed-by on v3 9/35
#18 lore raw

Re: [PATCH v3 09/35] acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of build_header()

Hi Igor,

Quoted 10 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header while previous acpi_data_push() reserved the header + 4 bytes field, add 4 bytes 'Reserved' field into hmat_build_table_structs() which didn have it.

Eruc

Quoted 40 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/hmat.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
hw/acpi/hmat.c +6 -8
index edb3fd91b2..6913ebf730 100644
@@ -200,6 +200,8 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *numa_state)
     HMAT_LB_Info *hmat_lb;
     NumaHmatCacheOptions *hmat_cache;
 
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+
     for (i = 0; i < numa_state->num_nodes; i++) {
         flags = 0;
 
@@ -256,14 +258,10 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *numa_state)
 void build_hmat(GArray *table_data, BIOSLinker *linker, NumaState *numa_state,
                 const char *oem_id, const char *oem_table_id)
 {
-    int hmat_start = table_data->len;
-
-    /* reserve space for HMAT header  */
-    acpi_data_push(table_data, 40);
+    AcpiTable table = { .sig = "HMAT", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     hmat_build_table_structs(table_data, numa_state);
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + hmat_start),
-                 "HMAT", table_data->len - hmat_start, 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
#19 lore raw

PATCH v3 10/35 acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header while previous acpi_data_push() reserved the header + 4 bytes field, add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't have it.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 42 +++++++++++++++++-------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
hw/acpi/nvdimm.c +17 -25
index e3d5fe1939..15f6ca82ca 100644
@@ -44,22 +44,6 @@ static const uint8_t nvdimm_nfit_spa_uuid[] =
       UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33,
               0x18, 0xb7, 0x8c, 0xdb);
 
-/*
- * NVDIMM Firmware Interface Table
- * @signature: "NFIT"
- *
- * It provides information that allows OSPM to enumerate NVDIMM present in
- * the platform and associate system physical address ranges created by the
- * NVDIMMs.
- *
- * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
- */
-struct NvdimmNfitHeader {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct NvdimmNfitHeader NvdimmNfitHeader;
-
 /*
  * define NFIT structures according to ACPI 6.0: 5.2.25 NVDIMM Firmware
  * Interface Table (NFIT).
@@ -401,25 +385,33 @@ void nvdimm_plug(NVDIMMState *state)
     nvdimm_build_fit_buffer(state);
 }
 
+/*
+ * NVDIMM Firmware Interface Table
+ * @signature: "NFIT"
+ *
+ * It provides information that allows OSPM to enumerate NVDIMM present in
+ * the platform and associate system physical address ranges created by the
+ * NVDIMMs.
+ *
+ * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
+ */
+
 static void nvdimm_build_nfit(NVDIMMState *state, GArray *table_offsets,
                               GArray *table_data, BIOSLinker *linker,
                               const char *oem_id, const char *oem_table_id)
 {
     NvdimmFitBuffer *fit_buf = &state->fit_buf;
-    unsigned int header;
+    AcpiTable table = { .sig = "NFIT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
     acpi_add_table(table_offsets, table_data);
 
-    /* NFIT header. */
-    header = table_data->len;
-    acpi_data_push(table_data, sizeof(NvdimmNfitHeader));
+    acpi_table_begin(&table, table_data);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
     /* NVDIMM device structures. */
     g_array_append_vals(table_data, fit_buf->fit->data, fit_buf->fit->len);
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + header), "NFIT",
-                 sizeof(NvdimmNfitHeader) + fit_buf->fit->len, 1, oem_id,
-                 oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 #define NVDIMM_DSM_MEMORY_SIZE      4096
Signature · 1 line
2.27.0
Reviewed-by on v3 10/35
#20 lore raw

Re: [PATCH v3 10/35] acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 10 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header while previous acpi_data_push() reserved the header + 4 bytes field, add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't have it.

Eric

Quoted 80 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 42 +++++++++++++++++-------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
hw/acpi/nvdimm.c +17 -25
index e3d5fe1939..15f6ca82ca 100644
@@ -44,22 +44,6 @@ static const uint8_t nvdimm_nfit_spa_uuid[] =
       UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33,
               0x18, 0xb7, 0x8c, 0xdb);
 
-/*
- * NVDIMM Firmware Interface Table
- * @signature: "NFIT"
- *
- * It provides information that allows OSPM to enumerate NVDIMM present in
- * the platform and associate system physical address ranges created by the
- * NVDIMMs.
- *
- * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
- */
-struct NvdimmNfitHeader {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct NvdimmNfitHeader NvdimmNfitHeader;
-
 /*
  * define NFIT structures according to ACPI 6.0: 5.2.25 NVDIMM Firmware
  * Interface Table (NFIT).
@@ -401,25 +385,33 @@ void nvdimm_plug(NVDIMMState *state)
     nvdimm_build_fit_buffer(state);
 }
 
+/*
+ * NVDIMM Firmware Interface Table
+ * @signature: "NFIT"
+ *
+ * It provides information that allows OSPM to enumerate NVDIMM present in
+ * the platform and associate system physical address ranges created by the
+ * NVDIMMs.
+ *
+ * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
+ */
+
 static void nvdimm_build_nfit(NVDIMMState *state, GArray *table_offsets,
                               GArray *table_data, BIOSLinker *linker,
                               const char *oem_id, const char *oem_table_id)
 {
     NvdimmFitBuffer *fit_buf = &state->fit_buf;
-    unsigned int header;
+    AcpiTable table = { .sig = "NFIT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
     acpi_add_table(table_offsets, table_data);
 
-    /* NFIT header. */
-    header = table_data->len;
-    acpi_data_push(table_data, sizeof(NvdimmNfitHeader));
+    acpi_table_begin(&table, table_data);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
     /* NVDIMM device structures. */
     g_array_append_vals(table_data, fit_buf->fit->data, fit_buf->fit->len);
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + header), "NFIT",
-                 sizeof(NvdimmNfitHeader) + fit_buf->fit->len, 1, oem_id,
-                 oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 #define NVDIMM_DSM_MEMORY_SIZE      4096
#21 lore raw

PATCH v3 11/35 acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
hw/acpi/nvdimm.c +10 -8
index 15f6ca82ca..e050b47c2b 100644
@@ -1274,14 +1274,15 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
                               NVDIMMState *nvdimm_state,
                               uint32_t ram_slots, const char *oem_id)
 {
+    int mem_addr_offset;
     Aml *ssdt, *sb_scope, *dev;
-    int mem_addr_offset, nvdimm_ssdt;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "NVDIMM" };
 
     acpi_add_table(table_offsets, table_data);
 
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("\\_SB");
 
     dev = aml_device("NVDR");
@@ -1310,8 +1311,6 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     aml_append(sb_scope, dev);
     aml_append(ssdt, sb_scope);
 
-    nvdimm_ssdt = table_data->len;
-
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, ssdt->buf->data, ssdt->buf->len);
     mem_addr_offset = build_append_named_dword(table_data,
@@ -1323,10 +1322,13 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     bios_linker_loader_add_pointer(linker,
         ACPI_BUILD_TABLE_FILE, mem_addr_offset, sizeof(uint32_t),
         NVDIMM_DSM_MEM_FILE, 0);
-    build_header(linker, table_data,
-        (void *)(table_data->data + nvdimm_ssdt),
-                 "SSDT", table_data->len - nvdimm_ssdt, 1, oem_id, "NVDIMM");
     free_aml_allocator();
+    /*
+     * must be executed as the last so that pointer patching command above
+     * would be executed by guest before it recalculates checksum which were
+     * scheduled by acpi_table_composed()
+     */
+    acpi_table_end(linker, &table);
 }
 
 void nvdimm_build_srat(GArray *table_data)
Signature · 1 line
2.27.0
Reviewed-by on v3 11/35
#22 lore raw

Re: [PATCH v3 11/35] acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

Hi Igor,

Quoted 48 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
hw/acpi/nvdimm.c +4 -5
index 15f6ca82ca..e050b47c2b 100644
@@ -1274,14 +1274,15 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
                               NVDIMMState *nvdimm_state,
                               uint32_t ram_slots, const char *oem_id)
 {
+    int mem_addr_offset;
     Aml *ssdt, *sb_scope, *dev;
-    int mem_addr_offset, nvdimm_ssdt;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "NVDIMM" };
 
     acpi_add_table(table_offsets, table_data);
 
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("\\_SB");
 
     dev = aml_device("NVDR");
@@ -1310,8 +1311,6 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     aml_append(sb_scope, dev);
     aml_append(ssdt, sb_scope);
 
-    nvdimm_ssdt = table_data->len;
-
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, ssdt->buf->data, ssdt->buf->len);
     mem_addr_offset = build_append_named_dword(table_data,
@@ -1323,10 +1322,13 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     bios_linker_loader_add_pointer(linker,

hw/acpi/nvdimm.c static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data, · line 1329

Quoted 10 lines
hw/acpi/nvdimm.c +4 -3
         ACPI_BUILD_TABLE_FILE, mem_addr_offset, sizeof(uint32_t),
         NVDIMM_DSM_MEM_FILE, 0);
-    build_header(linker, table_data,
-        (void *)(table_data->data + nvdimm_ssdt),
-                 "SSDT", table_data->len - nvdimm_ssdt, 1, oem_id, "NVDIMM");
     free_aml_allocator();
+    /*
+     * must be executed as the last so that pointer patching command above
+     * would be executed by guest before it recalculates checksum which were
+     * scheduled by acpi_table_composed()

s/acpi_table_composed/acpi_table_end.

also the sentence may need some rewording.

Wonder if that kind of comment still is useful. Maybe this should be put once in the doc comment of acpi_table_end() in [PATCH v3 01/35] acpi:
add helper routines to initialize ACPI tables, for future users to pay attention that it shall be called at the very end.

Besides

Eric

Quoted 6 lines
hw/acpi/nvdimm.c +2 -0
+     */
+    acpi_table_end(linker, &table);
 }
 
 void nvdimm_build_srat(GArray *table_data)
#23 lore raw

Re: [PATCH v3 11/35] acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 54 lines · On Mon, 20 Sep 2021 18:41:30 +0200 Eric Auger <[email protected]> wrote:

Hi Igor,

Quoted 51 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
hw/acpi/nvdimm.c +4 -6
index 15f6ca82ca..e050b47c2b 100644
@@ -1274,14 +1274,15 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
                               NVDIMMState *nvdimm_state,
                               uint32_t ram_slots, const char *oem_id)
 {
+    int mem_addr_offset;
     Aml *ssdt, *sb_scope, *dev;
-    int mem_addr_offset, nvdimm_ssdt;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "NVDIMM" };
 
     acpi_add_table(table_offsets, table_data);
 
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("\\_SB");
 
     dev = aml_device("NVDR");
@@ -1310,8 +1311,6 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     aml_append(sb_scope, dev);
     aml_append(ssdt, sb_scope);
 
-    nvdimm_ssdt = table_data->len;
-
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, ssdt->buf->data, ssdt->buf->len);
     mem_addr_offset = build_append_named_dword(table_data,
@@ -1323,10 +1322,13 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     bios_linker_loader_add_pointer(linker,
         ACPI_BUILD_TABLE_FILE, mem_addr_offset, sizeof(uint32_t),
         NVDIMM_DSM_MEM_FILE, 0);
-    build_header(linker, table_data,
Quoted 8 lines

hw/acpi/nvdimm.c static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data, · line 1329

Quoted 7 lines
hw/acpi/nvdimm.c +4 -2
-        (void *)(table_data->data + nvdimm_ssdt),
-                 "SSDT", table_data->len - nvdimm_ssdt, 1, oem_id, "NVDIMM");
     free_aml_allocator();
+    /*
+     * must be executed as the last so that pointer patching command above
+     * would be executed by guest before it recalculates checksum which were
+     * scheduled by acpi_table_composed()  

s/acpi_table_composed/acpi_table_end.

fixed it up:

/*
* must be executed as the last so that pointer patching command above
* would be executed by guest before it recalculated checksum which were
* scheduled by acpi_table_end()
*/

Quoted 6 lines

also the sentence may need some rewording.

Wonder if that kind of comment still is useful. Maybe this should be put once in the doc comment of acpi_table_end() in [PATCH v3 01/35] acpi:
add helper routines to initialize ACPI tables, for future users to pay attention that it shall be called at the very end.

I'll keep comment for now, and add patch to add something similar to acpi_table_end() later or drop it if I come up with a way to actually enforce expected linker order.

Quoted 14 lines

Besides

Eric

Quoted 6 lines
hw/acpi/nvdimm.c +2 -0
+     */
+    acpi_table_end(linker, &table);
 }
 
 void nvdimm_build_srat(GArray *table_data)
#24 lore raw

PATCH v3 12/35 acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/vmgenid.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
hw/acpi/vmgenid.c +7 -9
index 4f41a13ea0..95f94a2510 100644
@@ -29,6 +29,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     Aml *ssdt, *dev, *scope, *method, *addr, *if_ctx;
     uint32_t vgia_offset;
     QemuUUID guid_le;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "VMGENID" };
 
     /* Fill in the GUID values.  These need to be converted to little-endian
      * first, since that's what the guest expects
@@ -42,15 +44,12 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     g_array_insert_vals(guid, VMGENID_GUID_OFFSET, guid_le.data,
                         ARRAY_SIZE(guid_le.data));
 
-    /* Put this in a separate SSDT table */
+    /* Put VMGNEID into a separate SSDT table */
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     /* Storage for the GUID address */
-    vgia_offset = table_data->len +
-        build_append_named_dword(ssdt->buf, "VGIA");
+    vgia_offset = table_data->len + build_append_named_dword(ssdt->buf, "VGIA");
     scope = aml_scope("\\_SB");
     dev = aml_device("VGEN");
     aml_append(dev, aml_name_decl("_HID", aml_string("QEMUVGID")));
@@ -116,9 +115,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
         ACPI_BUILD_TABLE_FILE, vgia_offset, sizeof(uint32_t),
         VMGENID_GUID_FW_CFG_FILE, 0);
 
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - ssdt->buf->len),
-        "SSDT", ssdt->buf->len, 1, oem_id, "VMGENID");
+    /* must be called after above command to ensure correct table checksum */
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
Reviewed-by on v3 12/35
#25 lore raw

Re: [PATCH v3 12/35] acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 31 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/vmgenid.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
hw/acpi/vmgenid.c +3 -1
index 4f41a13ea0..95f94a2510 100644
@@ -29,6 +29,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     Aml *ssdt, *dev, *scope, *method, *addr, *if_ctx;
     uint32_t vgia_offset;
     QemuUUID guid_le;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "VMGENID" };
 
     /* Fill in the GUID values.  These need to be converted to little-endian
      * first, since that's what the guest expects
@@ -42,15 +44,12 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     g_array_insert_vals(guid, VMGENID_GUID_OFFSET, guid_le.data,
                         ARRAY_SIZE(guid_le.data));
 
-    /* Put this in a separate SSDT table */
+    /* Put VMGNEID into a separate SSDT table */

hw/acpi/vmgenid.c void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid, · line 52

Quoted 10 lines
hw/acpi/vmgenid.c +2 -5
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     /* Storage for the GUID address */
-    vgia_offset = table_data->len +
-        build_append_named_dword(ssdt->buf, "VGIA");
+    vgia_offset = table_data->len + build_append_named_dword(ssdt->buf, "VGIA");

not mandated but well

hw/acpi/vmgenid.c void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid, · line 118

Quoted 11 lines
hw/acpi/vmgenid.c +1 -3
     scope = aml_scope("\\_SB");
     dev = aml_device("VGEN");
     aml_append(dev, aml_name_decl("_HID", aml_string("QEMUVGID")));
@@ -116,9 +115,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
         ACPI_BUILD_TABLE_FILE, vgia_offset, sizeof(uint32_t),
         VMGENID_GUID_FW_CFG_FILE, 0);
 
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - ssdt->buf->len),
-        "SSDT", ssdt->buf->len, 1, oem_id, "VMGENID");
+    /* must be called after above command to ensure correct table checksum */

ditto

hw/acpi/vmgenid.c void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid, · line 122

Quoted 5 lines
hw/acpi/vmgenid.c +1 -0
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 

Eric

#26 lore raw

Re: [PATCH v3 12/35] acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 35 lines · On Wed, 22 Sep 2021 09:23:16 +0200 Eric Auger <[email protected]> wrote:
Quoted 34 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/vmgenid.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
hw/acpi/vmgenid.c +4 -1
index 4f41a13ea0..95f94a2510 100644
@@ -29,6 +29,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     Aml *ssdt, *dev, *scope, *method, *addr, *if_ctx;
     uint32_t vgia_offset;
     QemuUUID guid_le;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "VMGENID" };
 
     /* Fill in the GUID values.  These need to be converted to little-endian
      * first, since that's what the guest expects
@@ -42,15 +44,12 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     g_array_insert_vals(guid, VMGENID_GUID_OFFSET, guid_le.data,
                         ARRAY_SIZE(guid_le.data));
 
-    /* Put this in a separate SSDT table */
+    /* Put VMGNEID into a separate SSDT table */
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
 
Quoted 8 lines

hw/acpi/vmgenid.c void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid, · line 52

Quoted 7 lines
hw/acpi/vmgenid.c +1 -5
-    /* Reserve space for header */
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     /* Storage for the GUID address */
-    vgia_offset = table_data->len +
-        build_append_named_dword(ssdt->buf, "VGIA");
+    vgia_offset = table_data->len + build_append_named_dword(ssdt->buf, "VGIA");  

not mandated but well

dropped

Quoted 8 lines
Quoted 8 lines
hw/acpi/vmgenid.c +0 -0
     scope = aml_scope("\\_SB");
     dev = aml_device("VGEN");
     aml_append(dev, aml_name_decl("_HID", aml_string("QEMUVGID")));
@@ -116,9 +115,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
         ACPI_BUILD_TABLE_FILE, vgia_offset, sizeof(uint32_t),
         VMGENID_GUID_FW_CFG_FILE, 0);
 
Quoted 5 lines

hw/acpi/vmgenid.c void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid, · line 118

Quoted 4 lines
hw/acpi/vmgenid.c +1 -3
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - ssdt->buf->len),
-        "SSDT", ssdt->buf->len, 1, oem_id, "VMGENID");
+    /* must be called after above command to ensure correct table checksum */  

ditto

I'd prefer to keep this reminder until there is a way to enforce valid order.

Quoted 9 lines

hw/acpi/vmgenid.c void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid, · line 122

Quoted 5 lines
hw/acpi/vmgenid.c +1 -0
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 

Eric

#27 lore raw

PATCH v3 13/35 acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/i386/acpi-build.c +4 -6
index d1f5fa3b5a..9cefb814c2 100644
@@ -1405,12 +1405,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 #endif
     int i;
     VMBusBridge *vmbus_bridge = vmbus_bridge_find();
+    AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
-
     build_dbg_aml(dsdt);
     if (misc->is_piix4) {
         sb_scope = aml_scope("_SB");
@@ -1845,9 +1845,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 1, x86ms->oem_id, x86ms->oem_table_id);
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
#28 lore raw

PATCH v3 14/35 acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it convert build_hpet() to endian agnostic build_append_FOO() API

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 13 -------------
 hw/i386/acpi-build.c        | 26 ++++++++++++++++++--------
 2 files changed, 18 insertions(+), 21 deletions(-)
include/hw/acpi/acpi-defs.h +0 -13
index f6d2ca172b..4d8f8b34b0 100644
@@ -358,19 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * HPET Description Table
- */
-struct Acpi20Hpet {
-    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
-    uint32_t           timer_block_id;
-    struct AcpiGenericAddress addr;
-    uint8_t            hpet_number;
-    uint16_t           min_tick;
-    uint8_t            page_protect;
-} QEMU_PACKED;
-typedef struct Acpi20Hpet Acpi20Hpet;
-
 /*
  * SRAT (NUMA topology description) table
  */
hw/i386/acpi-build.c +18 -8
index 9cefb814c2..7cfa0cf825 100644
@@ -1849,22 +1849,32 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
     free_aml_allocator();
 }
 
+/*
+ * IA-PC HPET (High Precision Event Timers) Specification (Revision: 1.0a)
+ * 3.2.4The ACPI 2.0 HPET Description Table (HPET)
+ */
 static void
 build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
            const char *oem_table_id)
 {
-    Acpi20Hpet *hpet;
-    int hpet_start = table_data->len;
+    AcpiTable table = { .sig = "HPET", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    hpet = acpi_data_push(table_data, sizeof(*hpet));
+    acpi_table_begin(&table, table_data);
     /* Note timer_block_id value must be kept in sync with value advertised by
      * emulated hpet
      */
-    hpet->timer_block_id = cpu_to_le32(0x8086a201);
-    hpet->addr.address = cpu_to_le64(HPET_BASE);
-    build_header(linker, table_data,
-                 (void *)(table_data->data + hpet_start),
-                 "HPET", sizeof(*hpet), 1, oem_id, oem_table_id);
+    /* Event Timer Block ID */
+    build_append_int_noprefix(table_data, 0x8086a201, 4);
+    /* BASE_ADDRESS */
+    build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0, 0, 0, HPET_BASE);
+    /* HPET Number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Main Counter Minimum Clock_tick in Periodic Mode */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Page Protection And OEM Attribute */
+    build_append_int_noprefix(table_data, 0, 1);
+    acpi_table_end(linker, &table);
 }
 
 #ifdef CONFIG_TPM
Signature · 1 line
2.27.0
#29 lore raw

PATCH v3 15/35 acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries (which also removes some manual offset calculations).

---
v2:
* fix assert when starting QEMU with TPM 1.2
Stefan Berger <[email protected]>
v3:
* fix invalid checksum, by putting acpi_table_composed() after pointer patching
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 hw/i386/acpi-build.c        | 38 ++++++++++++++++++++++---------------
 2 files changed, 23 insertions(+), 29 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 4d8f8b34b0..3b42b138f0 100644
@@ -418,20 +418,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/*
- * TCPA Description Table
- *
- * Following Level 00, Rev 00.37 of specs:
- * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
- */
-struct Acpi20Tcpa {
-    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
-    uint16_t platform_class;
-    uint32_t log_area_minimum_length;
-    uint64_t log_area_start_address;
-} QEMU_PACKED;
-typedef struct Acpi20Tcpa Acpi20Tcpa;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
hw/i386/acpi-build.c +23 -15
index 7cfa0cf825..c329580cff 100644
@@ -1878,31 +1878,39 @@ build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
 }
 
 #ifdef CONFIG_TPM
+/*
+ * TCPA Description Table
+ *
+ * Following Level 00, Rev 00.37 of specs:
+ * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
+ * 7.1.2 ACPI Table Layout
+ */
 static void
 build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                const char *oem_id, const char *oem_table_id)
 {
-    int tcpa_start = table_data->len;
-    Acpi20Tcpa *tcpa = acpi_data_push(table_data, sizeof *tcpa);
-    unsigned log_addr_size = sizeof(tcpa->log_area_start_address);
-    unsigned log_addr_offset =
-        (char *)&tcpa->log_area_start_address - table_data->data;
+    unsigned log_addr_offset;
+    AcpiTable table = { .sig = "TCPA", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    tcpa->platform_class = cpu_to_le16(TPM_TCPA_ACPI_CLASS_CLIENT);
-    tcpa->log_area_minimum_length = cpu_to_le32(TPM_LOG_AREA_MINIMUM_SIZE);
-    acpi_data_push(tcpalog, le32_to_cpu(tcpa->log_area_minimum_length));
+    acpi_table_begin(&table, table_data);
+    /* Platform Class */
+    build_append_int_noprefix(table_data, TPM_TCPA_ACPI_CLASS_CLIENT, 2);
+    /* Log Area Minimum Length (LAML) */
+    build_append_int_noprefix(table_data, TPM_LOG_AREA_MINIMUM_SIZE, 4);
+    /* Log Area Start Address (LASA) */
+    log_addr_offset = table_data->len;
+    build_append_int_noprefix(table_data, 0, 8);
 
+    /* allocate/reserve space for TPM log area */
+    acpi_data_push(tcpalog, TPM_LOG_AREA_MINIMUM_SIZE);
     bios_linker_loader_alloc(linker, ACPI_BUILD_TPMLOG_FILE, tcpalog, 1,
                              false /* high memory */);
-
     /* log area start address to be filled by Guest linker */
-    bios_linker_loader_add_pointer(linker,
-        ACPI_BUILD_TABLE_FILE, log_addr_offset, log_addr_size,
-        ACPI_BUILD_TPMLOG_FILE, 0);
+    bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
+        log_addr_offset, 8, ACPI_BUILD_TPMLOG_FILE, 0);
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + tcpa_start),
-                 "TCPA", sizeof(*tcpa), 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 #endif
 
Signature · 1 line
2.27.0
Reviewed-by on v3 15/35
#30 lore raw

Re: [PATCH v3 15/35] acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 99 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries (which also removes some manual offset calculations).

---
v2:
* fix assert when starting QEMU with TPM 1.2
Stefan Berger <[email protected]>
v3:
* fix invalid checksum, by putting acpi_table_composed() after pointer patching
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 hw/i386/acpi-build.c        | 38 ++++++++++++++++++++++---------------
 2 files changed, 23 insertions(+), 29 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 4d8f8b34b0..3b42b138f0 100644
@@ -418,20 +418,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/*
- * TCPA Description Table
- *
- * Following Level 00, Rev 00.37 of specs:
- * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
- */
-struct Acpi20Tcpa {
-    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
-    uint16_t platform_class;
-    uint32_t log_area_minimum_length;
-    uint64_t log_area_start_address;
-} QEMU_PACKED;
-typedef struct Acpi20Tcpa Acpi20Tcpa;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
hw/i386/acpi-build.c +20 -12
index 7cfa0cf825..c329580cff 100644
@@ -1878,31 +1878,39 @@ build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
 }
 
 #ifdef CONFIG_TPM
+/*
+ * TCPA Description Table
+ *
+ * Following Level 00, Rev 00.37 of specs:
+ * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
+ * 7.1.2 ACPI Table Layout
+ */
 static void
 build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                const char *oem_id, const char *oem_table_id)
 {
-    int tcpa_start = table_data->len;
-    Acpi20Tcpa *tcpa = acpi_data_push(table_data, sizeof *tcpa);
-    unsigned log_addr_size = sizeof(tcpa->log_area_start_address);
-    unsigned log_addr_offset =
-        (char *)&tcpa->log_area_start_address - table_data->data;
+    unsigned log_addr_offset;
+    AcpiTable table = { .sig = "TCPA", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    tcpa->platform_class = cpu_to_le16(TPM_TCPA_ACPI_CLASS_CLIENT);
-    tcpa->log_area_minimum_length = cpu_to_le32(TPM_LOG_AREA_MINIMUM_SIZE);
-    acpi_data_push(tcpalog, le32_to_cpu(tcpa->log_area_minimum_length));
+    acpi_table_begin(&table, table_data);
+    /* Platform Class */
+    build_append_int_noprefix(table_data, TPM_TCPA_ACPI_CLASS_CLIENT, 2);
+    /* Log Area Minimum Length (LAML) */
+    build_append_int_noprefix(table_data, TPM_LOG_AREA_MINIMUM_SIZE, 4);
+    /* Log Area Start Address (LASA) */
+    log_addr_offset = table_data->len;
+    build_append_int_noprefix(table_data, 0, 8);
 
+    /* allocate/reserve space for TPM log area */
+    acpi_data_push(tcpalog, TPM_LOG_AREA_MINIMUM_SIZE);
     bios_linker_loader_alloc(linker, ACPI_BUILD_TPMLOG_FILE, tcpalog, 1,
                              false /* high memory */);
-
     /* log area start address to be filled by Guest linker */
-    bios_linker_loader_add_pointer(linker,
-        ACPI_BUILD_TABLE_FILE, log_addr_offset, log_addr_size,
-        ACPI_BUILD_TPMLOG_FILE, 0);

hw/i386/acpi-build.c build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 1916

Quoted 10 lines
hw/i386/acpi-build.c +3 -3
+    bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
+        log_addr_offset, 8, ACPI_BUILD_TPMLOG_FILE, 0);
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + tcpa_start),
-                 "TCPA", sizeof(*tcpa), 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 #endif
 

Looks good to me

Eric

#31 lore raw

PATCH v3 16/35 acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 11 -----------
 hw/arm/virt-acpi-build.c    | 15 +++++++--------
 hw/i386/acpi-build.c        | 18 +++++++-----------
 3 files changed, 14 insertions(+), 30 deletions(-)
include/hw/acpi/acpi-defs.h +0 -11
index 3b42b138f0..5826ee04b6 100644
@@ -358,17 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * SRAT (NUMA topology description) table
- */
-
-struct AcpiSystemResourceAffinityTable {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t    reserved1;
-    uint32_t    reserved2[2];
-} QEMU_PACKED;
-typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
-
 #define ACPI_SRAT_PROCESSOR_APIC     0
 #define ACPI_SRAT_MEMORY             1
 #define ACPI_SRAT_PROCESSOR_x2APIC   2
hw/arm/virt-acpi-build.c +7 -8
index 037cc1fd82..21efe7fe34 100644
@@ -477,18 +477,19 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratProcessorGiccAffinity *core;
     AcpiSratMemoryAffinity *numamem;
-    int i, srat_start;
+    int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
     MachineState *ms = MACHINE(vms);
     const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids(ms);
+    AcpiTable table = { .sig = "SRAT", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    srat_start = table_data->len;
-    srat = acpi_data_push(table_data, sizeof(*srat));
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
         core = acpi_data_push(table_data, sizeof(*core));
@@ -522,9 +523,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
-    build_header(linker, table_data, (void *)(table_data->data + srat_start),
-                 "SRAT", table_data->len - srat_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* GTDT */
hw/i386/acpi-build.c +7 -11
index c329580cff..41c0a63b30 100644
@@ -1920,11 +1920,10 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratMemoryAffinity *numamem;
 
     int i;
-    int srat_start, numa_start, slots;
+    int numa_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1935,11 +1934,12 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
     ram_addr_t hotplugabble_address_space_size =
         object_property_get_int(OBJECT(pcms), PC_MACHINE_DEVMEM_REGION_SIZE,
                                 NULL);
+    AcpiTable table = { .sig = "SRAT", .rev = 1, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
-    srat_start = table_data->len;
-
-    srat = acpi_data_push(table_data, sizeof *srat);
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < apic_ids->len; i++) {
         int node_id = apic_ids->cpus[i].props.node_id;
@@ -2045,11 +2045,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + srat_start),
-                 "SRAT",
-                 table_data->len - srat_start, 1, x86ms->oem_id,
-                 x86ms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*
Signature · 1 line
2.27.0
Reviewed-by on v3 16/35
#32 lore raw

Re: [PATCH v3 16/35] acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end() instead of build_header()

Hi Igor,

Quoted 3 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

nit: also removes AcpiSystemResourceAffinityTable and use build_append_int_noprefix for reserved fields

Quoted 23 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 11 -----------
 hw/arm/virt-acpi-build.c    | 15 +++++++--------
 hw/i386/acpi-build.c        | 18 +++++++-----------
 3 files changed, 14 insertions(+), 30 deletions(-)
include/hw/acpi/acpi-defs.h +0 -0
index 3b42b138f0..5826ee04b6 100644

include/hw/acpi/acpi-defs.h struct AcpiGenericTimerTable { · line 362

Quoted 5 lines
include/hw/acpi/acpi-defs.h +0 -2
@@ -358,17 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * SRAT (NUMA topology description) table

Missing version reference if any
https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#system-resource-affinity-table-srat
5.2.16. System Resource Affinity Table (SRAT)

Quoted 90 lines
include/hw/acpi/acpi-defs.h +0 -9
- */
-
-struct AcpiSystemResourceAffinityTable {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t    reserved1;
-    uint32_t    reserved2[2];
-} QEMU_PACKED;
-typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
-
 #define ACPI_SRAT_PROCESSOR_APIC     0
 #define ACPI_SRAT_MEMORY             1
 #define ACPI_SRAT_PROCESSOR_x2APIC   2
hw/arm/virt-acpi-build.c +7 -8
index 037cc1fd82..21efe7fe34 100644
@@ -477,18 +477,19 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratProcessorGiccAffinity *core;
     AcpiSratMemoryAffinity *numamem;
-    int i, srat_start;
+    int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
     MachineState *ms = MACHINE(vms);
     const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids(ms);
+    AcpiTable table = { .sig = "SRAT", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    srat_start = table_data->len;
-    srat = acpi_data_push(table_data, sizeof(*srat));
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
         core = acpi_data_push(table_data, sizeof(*core));
@@ -522,9 +523,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
-    build_header(linker, table_data, (void *)(table_data->data + srat_start),
-                 "SRAT", table_data->len - srat_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* GTDT */
hw/i386/acpi-build.c +6 -6
index c329580cff..41c0a63b30 100644
@@ -1920,11 +1920,10 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratMemoryAffinity *numamem;
 
     int i;
-    int srat_start, numa_start, slots;
+    int numa_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1935,11 +1934,12 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
     ram_addr_t hotplugabble_address_space_size =
         object_property_get_int(OBJECT(pcms), PC_MACHINE_DEVMEM_REGION_SIZE,
                                 NULL);
+    AcpiTable table = { .sig = "SRAT", .rev = 1, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
-    srat_start = table_data->len;
-
-    srat = acpi_data_push(table_data, sizeof *srat);
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < apic_ids->len; i++) {
         int node_id = apic_ids->cpus[i].props.node_id;
@@ -2045,11 +2045,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 2051

Quoted 10 lines
hw/i386/acpi-build.c +1 -5
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + srat_start),
-                 "SRAT",
-                 table_data->len - srat_start, 1, x86ms->oem_id,
-                 x86ms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*

Besides

Eric

#33 lore raw

Re: [PATCH v3 16/35] acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 9 lines · On Wed, 22 Sep 2021 09:38:14 +0200 Eric Auger <[email protected]> wrote:

Hi Igor,

Quoted 3 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

nit: also removes AcpiSystemResourceAffinityTable and use build_append_int_noprefix for reserved fields

I didn't find it as worth of mentioning, the same is done in some other patches where header wasn't standard one.

Quoted 25 lines
Quoted 25 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 11 -----------
 hw/arm/virt-acpi-build.c    | 15 +++++++--------
 hw/i386/acpi-build.c        | 18 +++++++-----------
 3 files changed, 14 insertions(+), 30 deletions(-)
include/hw/acpi/acpi-defs.h +0 -0
index 3b42b138f0..5826ee04b6 100644
@@ -358,17 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
Quoted 5 lines

include/hw/acpi/acpi-defs.h struct AcpiGenericTimerTable { · line 362

Quoted 2 lines
include/hw/acpi/acpi-defs.h +0 -2
-/*
- * SRAT (NUMA topology description) table  

Missing version reference if any
https://uefi.org/specs/ACPI/6.4/05_ACPI_Software_Programming_Model/ACPI_Software_Programming_Model.html#system-resource-affinity-table-srat
5.2.16. System Resource Affinity Table (SRAT)

next patch adds missing doc comment(s) when converting to build_append_int_noprefix()

Quoted 107 lines
Quoted 90 lines
include/hw/acpi/acpi-defs.h +0 -9
- */
-
-struct AcpiSystemResourceAffinityTable {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t    reserved1;
-    uint32_t    reserved2[2];
-} QEMU_PACKED;
-typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
-
 #define ACPI_SRAT_PROCESSOR_APIC     0
 #define ACPI_SRAT_MEMORY             1
 #define ACPI_SRAT_PROCESSOR_x2APIC   2
hw/arm/virt-acpi-build.c +7 -8
index 037cc1fd82..21efe7fe34 100644
@@ -477,18 +477,19 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratProcessorGiccAffinity *core;
     AcpiSratMemoryAffinity *numamem;
-    int i, srat_start;
+    int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
     MachineState *ms = MACHINE(vms);
     const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids(ms);
+    AcpiTable table = { .sig = "SRAT", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    srat_start = table_data->len;
-    srat = acpi_data_push(table_data, sizeof(*srat));
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
         core = acpi_data_push(table_data, sizeof(*core));
@@ -522,9 +523,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
-    build_header(linker, table_data, (void *)(table_data->data + srat_start),
-                 "SRAT", table_data->len - srat_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* GTDT */
hw/i386/acpi-build.c +6 -6
index c329580cff..41c0a63b30 100644
@@ -1920,11 +1920,10 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratMemoryAffinity *numamem;
 
     int i;
-    int srat_start, numa_start, slots;
+    int numa_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1935,11 +1934,12 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
     ram_addr_t hotplugabble_address_space_size =
         object_property_get_int(OBJECT(pcms), PC_MACHINE_DEVMEM_REGION_SIZE,
                                 NULL);
+    AcpiTable table = { .sig = "SRAT", .rev = 1, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
-    srat_start = table_data->len;
-
-    srat = acpi_data_push(table_data, sizeof *srat);
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < apic_ids->len; i++) {
         int node_id = apic_ids->cpus[i].props.node_id;
@@ -2045,11 +2045,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 2051

Quoted 10 lines
hw/i386/acpi-build.c +1 -5
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + srat_start),
-                 "SRAT",
-                 table_data->len - srat_start, 1, x86ms->oem_id,
-                 x86ms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*

Besides

Eric

#34 lore raw

PATCH v3 17/35 acpi: use build_append_int_noprefix() API to compose SRAT table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building SRAT tables for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v3:
* rebase on top of (e77af21a7a2 hw/i386/acpi-build: Get NUMA information from struct NumaState)
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 49 -----------------------
 include/hw/acpi/aml-build.h |  2 +-
 hw/acpi/aml-build.c         | 24 ++++++++----
 hw/acpi/nvdimm.c            |  4 +-
 hw/arm/virt-acpi-build.c    | 29 ++++++++------
 hw/i386/acpi-build.c        | 78 +++++++++++++++++++++----------------
 6 files changed, 80 insertions(+), 106 deletions(-)
include/hw/acpi/acpi-defs.h +0 -49
index 5826ee04b6..d293304f9c 100644
@@ -358,55 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-#define ACPI_SRAT_PROCESSOR_APIC     0
-#define ACPI_SRAT_MEMORY             1
-#define ACPI_SRAT_PROCESSOR_x2APIC   2
-#define ACPI_SRAT_PROCESSOR_GICC     3
-
-struct AcpiSratProcessorAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint8_t     proximity_lo;
-    uint8_t     local_apic_id;
-    uint32_t    flags;
-    uint8_t     local_sapic_eid;
-    uint8_t     proximity_hi[3];
-    uint32_t    reserved;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorAffinity AcpiSratProcessorAffinity;
-
-struct AcpiSratProcessorX2ApicAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint16_t    reserved;
-    uint32_t    proximity_domain;
-    uint32_t    x2apic_id;
-    uint32_t    flags;
-    uint32_t    clk_domain;
-    uint32_t    reserved2;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorX2ApicAffinity AcpiSratProcessorX2ApicAffinity;
-
-struct AcpiSratMemoryAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint16_t    reserved1;
-    uint64_t    base_addr;
-    uint64_t    range_length;
-    uint32_t    reserved2;
-    uint32_t    flags;
-    uint32_t    reserved3[2];
-} QEMU_PACKED;
-typedef struct AcpiSratMemoryAffinity AcpiSratMemoryAffinity;
-
-struct AcpiSratProcessorGiccAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint32_t    acpi_processor_uid;
-    uint32_t    flags;
-    uint32_t    clock_domain;
-} QEMU_PACKED;
-
-typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
include/hw/acpi/aml-build.h +1 -1
index 4242382399..6e1f42e119 100644
@@ -487,7 +487,7 @@ Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set, uint32_t io_offset,
                uint32_t mmio32_offset, uint64_t mmio64_offset,
                uint16_t bus_nr_offset);
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags);
 
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
hw/acpi/aml-build.c +17 -7
index 5e8bfb631c..050fdb3f37 100644
@@ -1936,15 +1936,25 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
     acpi_table_end(linker, &table);
 }
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+/*
+ * ACPI spec, Revision 4.0
+ * 5.2.16.2 Memory Affinity Structure
+ */
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags)
 {
-    numamem->type = ACPI_SRAT_MEMORY;
-    numamem->length = sizeof(*numamem);
-    numamem->proximity = cpu_to_le32(node);
-    numamem->flags = cpu_to_le32(flags);
-    numamem->base_addr = cpu_to_le64(base);
-    numamem->range_length = cpu_to_le64(len);
+    build_append_int_noprefix(table_data, 1, 1); /* Type */
+    build_append_int_noprefix(table_data, 40, 1); /* Length */
+    build_append_int_noprefix(table_data, node, 4); /* Proximity Domain */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    build_append_int_noprefix(table_data, base, 4); /* Base Address Low */
+    /* Base Address High */
+    build_append_int_noprefix(table_data, base >> 32, 4);
+    build_append_int_noprefix(table_data, len, 4); /* Length Low */
+    build_append_int_noprefix(table_data, len >> 32, 4); /* Length High */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, flags, 4); /* Flags */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 }
 
 /*
hw/acpi/nvdimm.c +1 -3
index e050b47c2b..baab81f7a6 100644
@@ -1336,7 +1336,6 @@ void nvdimm_build_srat(GArray *table_data)
     GSList *device_list = nvdimm_get_device_list();
 
     for (; device_list; device_list = device_list->next) {
-        AcpiSratMemoryAffinity *numamem = NULL;
         DeviceState *dev = device_list->data;
         Object *obj = OBJECT(dev);
         uint64_t addr, size;
@@ -1346,8 +1345,7 @@ void nvdimm_build_srat(GArray *table_data)
         addr = object_property_get_uint(obj, PC_DIMM_ADDR_PROP, &error_abort);
         size = object_property_get_uint(obj, PC_DIMM_SIZE_PROP, &error_abort);
 
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, addr, size, node,
+        build_srat_memory(table_data, addr, size, node,
                           MEM_AFFINITY_ENABLED | MEM_AFFINITY_NON_VOLATILE);
     }
     g_slist_free(device_list);
hw/arm/virt-acpi-build.c +17 -12
index 21efe7fe34..6ba02cf281 100644
@@ -474,11 +474,13 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
+/*
+ * ACPI spec, Revision 5.1
+ * 5.2.16 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSratProcessorGiccAffinity *core;
-    AcpiSratMemoryAffinity *numamem;
     int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
@@ -492,19 +494,23 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
-        core = acpi_data_push(table_data, sizeof(*core));
-        core->type = ACPI_SRAT_PROCESSOR_GICC;
-        core->length = sizeof(*core);
-        core->proximity = cpu_to_le32(cpu_list->cpus[i].props.node_id);
-        core->acpi_processor_uid = cpu_to_le32(i);
-        core->flags = cpu_to_le32(1);
+        uint32_t nodeid = cpu_list->cpus[i].props.node_id;
+        /*
+         * 5.2.16.4 GICC Affinity Structure
+         */
+        build_append_int_noprefix(table_data, 3, 1);      /* Type */
+        build_append_int_noprefix(table_data, 18, 1);     /* Length */
+        build_append_int_noprefix(table_data, nodeid, 4); /* Proximity Domain */
+        build_append_int_noprefix(table_data, i, 4); /* ACPI Processor UID */
+        /* Flags, Table 5-76 */
+        build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
     }
 
     mem_base = vms->memmap[VIRT_MEM].base;
     for (i = 0; i < ms->numa_state->num_nodes; ++i) {
         if (ms->numa_state->nodes[i].node_mem > 0) {
-            numamem = acpi_data_push(table_data, sizeof(*numamem));
-            build_srat_memory(numamem, mem_base,
+            build_srat_memory(table_data, mem_base,
                               ms->numa_state->nodes[i].node_mem, i,
                               MEM_AFFINITY_ENABLED);
             mem_base += ms->numa_state->nodes[i].node_mem;
@@ -516,8 +522,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     if (ms->device_memory) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, ms->device_memory->base,
+        build_srat_memory(table_data, ms->device_memory->base,
                           memory_region_size(&ms->device_memory->mr),
                           ms->numa_state->num_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
hw/i386/acpi-build.c +44 -34

133 lines not on this page · raw message

Signature · 1 line
2.27.0
Reviewed-by on v3 17/35
#35 lore raw

Re: [PATCH v3 17/35] acpi: use build_append_int_noprefix() API to compose SRAT table

Quoted 257 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building SRAT tables for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v3:
* rebase on top of (e77af21a7a2 hw/i386/acpi-build: Get NUMA information from struct NumaState)
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 49 -----------------------
 include/hw/acpi/aml-build.h |  2 +-
 hw/acpi/aml-build.c         | 24 ++++++++----
 hw/acpi/nvdimm.c            |  4 +-
 hw/arm/virt-acpi-build.c    | 29 ++++++++------
 hw/i386/acpi-build.c        | 78 +++++++++++++++++++++----------------
 6 files changed, 80 insertions(+), 106 deletions(-)
include/hw/acpi/acpi-defs.h +0 -49
index 5826ee04b6..d293304f9c 100644
@@ -358,55 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-#define ACPI_SRAT_PROCESSOR_APIC     0
-#define ACPI_SRAT_MEMORY             1
-#define ACPI_SRAT_PROCESSOR_x2APIC   2
-#define ACPI_SRAT_PROCESSOR_GICC     3
-
-struct AcpiSratProcessorAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint8_t     proximity_lo;
-    uint8_t     local_apic_id;
-    uint32_t    flags;
-    uint8_t     local_sapic_eid;
-    uint8_t     proximity_hi[3];
-    uint32_t    reserved;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorAffinity AcpiSratProcessorAffinity;
-
-struct AcpiSratProcessorX2ApicAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint16_t    reserved;
-    uint32_t    proximity_domain;
-    uint32_t    x2apic_id;
-    uint32_t    flags;
-    uint32_t    clk_domain;
-    uint32_t    reserved2;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorX2ApicAffinity AcpiSratProcessorX2ApicAffinity;
-
-struct AcpiSratMemoryAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint16_t    reserved1;
-    uint64_t    base_addr;
-    uint64_t    range_length;
-    uint32_t    reserved2;
-    uint32_t    flags;
-    uint32_t    reserved3[2];
-} QEMU_PACKED;
-typedef struct AcpiSratMemoryAffinity AcpiSratMemoryAffinity;
-
-struct AcpiSratProcessorGiccAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint32_t    acpi_processor_uid;
-    uint32_t    flags;
-    uint32_t    clock_domain;
-} QEMU_PACKED;
-
-typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
include/hw/acpi/aml-build.h +1 -1
index 4242382399..6e1f42e119 100644
@@ -487,7 +487,7 @@ Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set, uint32_t io_offset,
                uint32_t mmio32_offset, uint64_t mmio64_offset,
                uint16_t bus_nr_offset);
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags);
 
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
hw/acpi/aml-build.c +17 -7
index 5e8bfb631c..050fdb3f37 100644
@@ -1936,15 +1936,25 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
     acpi_table_end(linker, &table);
 }
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+/*
+ * ACPI spec, Revision 4.0
+ * 5.2.16.2 Memory Affinity Structure
+ */
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags)
 {
-    numamem->type = ACPI_SRAT_MEMORY;
-    numamem->length = sizeof(*numamem);
-    numamem->proximity = cpu_to_le32(node);
-    numamem->flags = cpu_to_le32(flags);
-    numamem->base_addr = cpu_to_le64(base);
-    numamem->range_length = cpu_to_le64(len);
+    build_append_int_noprefix(table_data, 1, 1); /* Type */
+    build_append_int_noprefix(table_data, 40, 1); /* Length */
+    build_append_int_noprefix(table_data, node, 4); /* Proximity Domain */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    build_append_int_noprefix(table_data, base, 4); /* Base Address Low */
+    /* Base Address High */
+    build_append_int_noprefix(table_data, base >> 32, 4);
+    build_append_int_noprefix(table_data, len, 4); /* Length Low */
+    build_append_int_noprefix(table_data, len >> 32, 4); /* Length High */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, flags, 4); /* Flags */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 }
 
 /*
hw/acpi/nvdimm.c +1 -3
index e050b47c2b..baab81f7a6 100644
@@ -1336,7 +1336,6 @@ void nvdimm_build_srat(GArray *table_data)
     GSList *device_list = nvdimm_get_device_list();
 
     for (; device_list; device_list = device_list->next) {
-        AcpiSratMemoryAffinity *numamem = NULL;
         DeviceState *dev = device_list->data;
         Object *obj = OBJECT(dev);
         uint64_t addr, size;
@@ -1346,8 +1345,7 @@ void nvdimm_build_srat(GArray *table_data)
         addr = object_property_get_uint(obj, PC_DIMM_ADDR_PROP, &error_abort);
         size = object_property_get_uint(obj, PC_DIMM_SIZE_PROP, &error_abort);
 
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, addr, size, node,
+        build_srat_memory(table_data, addr, size, node,
                           MEM_AFFINITY_ENABLED | MEM_AFFINITY_NON_VOLATILE);
     }
     g_slist_free(device_list);
hw/arm/virt-acpi-build.c +17 -12
index 21efe7fe34..6ba02cf281 100644
@@ -474,11 +474,13 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
+/*
+ * ACPI spec, Revision 5.1
+ * 5.2.16 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSratProcessorGiccAffinity *core;
-    AcpiSratMemoryAffinity *numamem;
     int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
@@ -492,19 +494,23 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
-        core = acpi_data_push(table_data, sizeof(*core));
-        core->type = ACPI_SRAT_PROCESSOR_GICC;
-        core->length = sizeof(*core);
-        core->proximity = cpu_to_le32(cpu_list->cpus[i].props.node_id);
-        core->acpi_processor_uid = cpu_to_le32(i);
-        core->flags = cpu_to_le32(1);
+        uint32_t nodeid = cpu_list->cpus[i].props.node_id;
+        /*
+         * 5.2.16.4 GICC Affinity Structure
+         */
+        build_append_int_noprefix(table_data, 3, 1);      /* Type */
+        build_append_int_noprefix(table_data, 18, 1);     /* Length */
+        build_append_int_noprefix(table_data, nodeid, 4); /* Proximity Domain */
+        build_append_int_noprefix(table_data, i, 4); /* ACPI Processor UID */
+        /* Flags, Table 5-76 */
+        build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
     }
 
     mem_base = vms->memmap[VIRT_MEM].base;
     for (i = 0; i < ms->numa_state->num_nodes; ++i) {
         if (ms->numa_state->nodes[i].node_mem > 0) {
-            numamem = acpi_data_push(table_data, sizeof(*numamem));
-            build_srat_memory(numamem, mem_base,
+            build_srat_memory(table_data, mem_base,
                               ms->numa_state->nodes[i].node_mem, i,
                               MEM_AFFINITY_ENABLED);
             mem_base += ms->numa_state->nodes[i].node_mem;
@@ -516,8 +522,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     if (ms->device_memory) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, ms->device_memory->base,
+        build_srat_memory(table_data, ms->device_memory->base,
                           memory_region_size(&ms->device_memory->mr),
                           ms->numa_state->num_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
hw/i386/acpi-build.c +7 -13
index 41c0a63b30..51e0ba07b6 100644
@@ -1917,13 +1917,15 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 #define HOLE_640K_START  (640 * KiB)
 #define HOLE_640K_END   (1 * MiB)
 
+/*
+ * ACPI spec, Revision 3.0
+ * 5.2.15 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSratMemoryAffinity *numamem;
-
     int i;
-    int numa_start, slots;
+    int numa_mem_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1946,34 +1948,41 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         uint32_t apic_id = apic_ids->cpus[i].arch_id;
 
         if (apic_id < 255) {
-            AcpiSratProcessorAffinity *core;
-
-            core = acpi_data_push(table_data, sizeof *core);
-            core->type = ACPI_SRAT_PROCESSOR_APIC;
-            core->length = sizeof(*core);
-            core->local_apic_id = apic_id;
-            core->proximity_lo = node_id;
-            memset(core->proximity_hi, 0, 3);
-            core->local_sapic_eid = 0;
-            core->flags = cpu_to_le32(1);
+            /* 5.2.15.1 Processor Local APIC/SAPIC Affinity Structure */
+            build_append_int_noprefix(table_data, 0, 1);  /* Type  */

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 1962

Quoted 10 lines
hw/i386/acpi-build.c +10 -0
+            build_append_int_noprefix(table_data, 16, 1); /* Length */
+            /* Proximity Domain [7:0] */
+            build_append_int_noprefix(table_data, node_id, 1);
+            build_append_int_noprefix(table_data, apic_id, 1); /* APIC ID */
+            /* Flags, Table 5-36 */
+            build_append_int_noprefix(table_data, 1, 4);
+            build_append_int_noprefix(table_data, 0, 1); /* Local SAPIC EID */
+            /* Proximity Domain [31:8] */
+            build_append_int_noprefix(table_data, 0, 3);
+            build_append_int_noprefix(table_data, 0, 4); /* Reserved */

clock domain?

Quoted 87 lines
hw/i386/acpi-build.c +26 -19
         } else {
-            AcpiSratProcessorX2ApicAffinity *core;
-
-            core = acpi_data_push(table_data, sizeof *core);
-            core->type = ACPI_SRAT_PROCESSOR_x2APIC;
-            core->length = sizeof(*core);
-            core->x2apic_id = cpu_to_le32(apic_id);
-            core->proximity_domain = cpu_to_le32(node_id);
-            core->flags = cpu_to_le32(1);
+            /*
+             * ACPI spec, Revision 4.0
+             * 5.2.16.3 Processor Local x2APIC Affinity Structure
+             */
+            build_append_int_noprefix(table_data, 2, 1);  /* Type  */
+            build_append_int_noprefix(table_data, 24, 1); /* Length */
+            build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+            /* Proximity Domain */
+            build_append_int_noprefix(table_data, node_id, 4);
+            build_append_int_noprefix(table_data, apic_id, 4); /* X2APIC ID */
+            /* Flags, Table 5-39 */
+            build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+            build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
+            build_append_int_noprefix(table_data, 0, 4); /* Reserved */
         }
     }
 
-
     /* the memory map is a bit tricky, it contains at least one hole
      * from 640k-1M and possibly another one from 3.5G-4G.
      */
     next_base = 0;
-    numa_start = table_data->len;
+    numa_mem_start = table_data->len;
 
     for (i = 1; i < nb_numa_nodes + 1; ++i) {
         mem_base = next_base;
@@ -1985,8 +1994,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
             next_base > HOLE_640K_START) {
             mem_len -= next_base - HOLE_640K_START;
             if (mem_len > 0) {
-                numamem = acpi_data_push(table_data, sizeof *numamem);
-                build_srat_memory(numamem, mem_base, mem_len, i - 1,
+                build_srat_memory(table_data, mem_base, mem_len, i - 1,
                                   MEM_AFFINITY_ENABLED);
             }
 
@@ -2004,8 +2012,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
             next_base > x86ms->below_4g_mem_size) {
             mem_len -= next_base - x86ms->below_4g_mem_size;
             if (mem_len > 0) {
-                numamem = acpi_data_push(table_data, sizeof *numamem);
-                build_srat_memory(numamem, mem_base, mem_len, i - 1,
+                build_srat_memory(table_data, mem_base, mem_len, i - 1,
                                   MEM_AFFINITY_ENABLED);
             }
             mem_base = 1ULL << 32;
@@ -2014,8 +2021,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         }
 
         if (mem_len > 0) {
-            numamem = acpi_data_push(table_data, sizeof *numamem);
-            build_srat_memory(numamem, mem_base, mem_len, i - 1,
+            build_srat_memory(table_data, mem_base, mem_len, i - 1,
                               MEM_AFFINITY_ENABLED);
         }
     }
@@ -2024,10 +2030,15 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         nvdimm_build_srat(table_data);
     }
 
-    slots = (table_data->len - numa_start) / sizeof *numamem;
+    /*
+     * TODO: this part is not in ACPI spec and current linux kernel boots fine
+     * without these entries. But I recall there were issues the last time I
+     * tried to remove it with some ancient guest OS, however I can't remember
+     * what that was so keep this around for now
+     */
+    slots = (table_data->len - numa_mem_start) / 40 /* mem affinity len */;
     for (; slots < nb_numa_nodes + 2; slots++) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
+        build_srat_memory(table_data, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
     }
 
     /*

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 2056

Quoted 9 lines
hw/i386/acpi-build.c +1 -2
@@ -2039,8 +2050,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
      * providing _PXM method if necessary.
      */
     if (hotplugabble_address_space_size) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, machine->device_memory->base,
+        build_srat_memory(table_data, machine->device_memory->base,
                           hotplugabble_address_space_size, nb_numa_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }

Besides

Eric

#36 lore raw

Re: [PATCH v3 17/35] acpi: use build_append_int_noprefix() API to compose SRAT table

Quoted 261 lines · On Wed, 22 Sep 2021 10:55:20 +0200 Eric Auger <[email protected]> wrote:
Quoted 260 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building SRAT tables for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v3:
* rebase on top of (e77af21a7a2 hw/i386/acpi-build: Get NUMA information from struct NumaState)
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 49 -----------------------
 include/hw/acpi/aml-build.h |  2 +-
 hw/acpi/aml-build.c         | 24 ++++++++----
 hw/acpi/nvdimm.c            |  4 +-
 hw/arm/virt-acpi-build.c    | 29 ++++++++------
 hw/i386/acpi-build.c        | 78 +++++++++++++++++++++----------------
 6 files changed, 80 insertions(+), 106 deletions(-)
include/hw/acpi/acpi-defs.h +0 -49
index 5826ee04b6..d293304f9c 100644
@@ -358,55 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-#define ACPI_SRAT_PROCESSOR_APIC     0
-#define ACPI_SRAT_MEMORY             1
-#define ACPI_SRAT_PROCESSOR_x2APIC   2
-#define ACPI_SRAT_PROCESSOR_GICC     3
-
-struct AcpiSratProcessorAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint8_t     proximity_lo;
-    uint8_t     local_apic_id;
-    uint32_t    flags;
-    uint8_t     local_sapic_eid;
-    uint8_t     proximity_hi[3];
-    uint32_t    reserved;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorAffinity AcpiSratProcessorAffinity;
-
-struct AcpiSratProcessorX2ApicAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint16_t    reserved;
-    uint32_t    proximity_domain;
-    uint32_t    x2apic_id;
-    uint32_t    flags;
-    uint32_t    clk_domain;
-    uint32_t    reserved2;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorX2ApicAffinity AcpiSratProcessorX2ApicAffinity;
-
-struct AcpiSratMemoryAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint16_t    reserved1;
-    uint64_t    base_addr;
-    uint64_t    range_length;
-    uint32_t    reserved2;
-    uint32_t    flags;
-    uint32_t    reserved3[2];
-} QEMU_PACKED;
-typedef struct AcpiSratMemoryAffinity AcpiSratMemoryAffinity;
-
-struct AcpiSratProcessorGiccAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint32_t    acpi_processor_uid;
-    uint32_t    flags;
-    uint32_t    clock_domain;
-} QEMU_PACKED;
-
-typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
include/hw/acpi/aml-build.h +1 -1
index 4242382399..6e1f42e119 100644
@@ -487,7 +487,7 @@ Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set, uint32_t io_offset,
                uint32_t mmio32_offset, uint64_t mmio64_offset,
                uint16_t bus_nr_offset);
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags);
 
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
hw/acpi/aml-build.c +17 -7
index 5e8bfb631c..050fdb3f37 100644
@@ -1936,15 +1936,25 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
     acpi_table_end(linker, &table);
 }
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+/*
+ * ACPI spec, Revision 4.0
+ * 5.2.16.2 Memory Affinity Structure
+ */
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags)
 {
-    numamem->type = ACPI_SRAT_MEMORY;
-    numamem->length = sizeof(*numamem);
-    numamem->proximity = cpu_to_le32(node);
-    numamem->flags = cpu_to_le32(flags);
-    numamem->base_addr = cpu_to_le64(base);
-    numamem->range_length = cpu_to_le64(len);
+    build_append_int_noprefix(table_data, 1, 1); /* Type */
+    build_append_int_noprefix(table_data, 40, 1); /* Length */
+    build_append_int_noprefix(table_data, node, 4); /* Proximity Domain */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    build_append_int_noprefix(table_data, base, 4); /* Base Address Low */
+    /* Base Address High */
+    build_append_int_noprefix(table_data, base >> 32, 4);
+    build_append_int_noprefix(table_data, len, 4); /* Length Low */
+    build_append_int_noprefix(table_data, len >> 32, 4); /* Length High */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, flags, 4); /* Flags */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 }
 
 /*
hw/acpi/nvdimm.c +1 -3
index e050b47c2b..baab81f7a6 100644
@@ -1336,7 +1336,6 @@ void nvdimm_build_srat(GArray *table_data)
     GSList *device_list = nvdimm_get_device_list();
 
     for (; device_list; device_list = device_list->next) {
-        AcpiSratMemoryAffinity *numamem = NULL;
         DeviceState *dev = device_list->data;
         Object *obj = OBJECT(dev);
         uint64_t addr, size;
@@ -1346,8 +1345,7 @@ void nvdimm_build_srat(GArray *table_data)
         addr = object_property_get_uint(obj, PC_DIMM_ADDR_PROP, &error_abort);
         size = object_property_get_uint(obj, PC_DIMM_SIZE_PROP, &error_abort);
 
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, addr, size, node,
+        build_srat_memory(table_data, addr, size, node,
                           MEM_AFFINITY_ENABLED | MEM_AFFINITY_NON_VOLATILE);
     }
     g_slist_free(device_list);
hw/arm/virt-acpi-build.c +17 -12
index 21efe7fe34..6ba02cf281 100644
@@ -474,11 +474,13 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
+/*
+ * ACPI spec, Revision 5.1
+ * 5.2.16 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSratProcessorGiccAffinity *core;
-    AcpiSratMemoryAffinity *numamem;
     int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
@@ -492,19 +494,23 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
-        core = acpi_data_push(table_data, sizeof(*core));
-        core->type = ACPI_SRAT_PROCESSOR_GICC;
-        core->length = sizeof(*core);
-        core->proximity = cpu_to_le32(cpu_list->cpus[i].props.node_id);
-        core->acpi_processor_uid = cpu_to_le32(i);
-        core->flags = cpu_to_le32(1);
+        uint32_t nodeid = cpu_list->cpus[i].props.node_id;
+        /*
+         * 5.2.16.4 GICC Affinity Structure
+         */
+        build_append_int_noprefix(table_data, 3, 1);      /* Type */
+        build_append_int_noprefix(table_data, 18, 1);     /* Length */
+        build_append_int_noprefix(table_data, nodeid, 4); /* Proximity Domain */
+        build_append_int_noprefix(table_data, i, 4); /* ACPI Processor UID */
+        /* Flags, Table 5-76 */
+        build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
     }
 
     mem_base = vms->memmap[VIRT_MEM].base;
     for (i = 0; i < ms->numa_state->num_nodes; ++i) {
         if (ms->numa_state->nodes[i].node_mem > 0) {
-            numamem = acpi_data_push(table_data, sizeof(*numamem));
-            build_srat_memory(numamem, mem_base,
+            build_srat_memory(table_data, mem_base,
                               ms->numa_state->nodes[i].node_mem, i,
                               MEM_AFFINITY_ENABLED);
             mem_base += ms->numa_state->nodes[i].node_mem;
@@ -516,8 +522,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     if (ms->device_memory) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, ms->device_memory->base,
+        build_srat_memory(table_data, ms->device_memory->base,
                           memory_region_size(&ms->device_memory->mr),
                           ms->numa_state->num_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
hw/i386/acpi-build.c +10 -13
index 41c0a63b30..51e0ba07b6 100644
@@ -1917,13 +1917,15 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 #define HOLE_640K_START  (640 * KiB)
 #define HOLE_640K_END   (1 * MiB)
 
+/*
+ * ACPI spec, Revision 3.0
+ * 5.2.15 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSratMemoryAffinity *numamem;
-
     int i;
-    int numa_start, slots;
+    int numa_mem_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1946,34 +1948,41 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         uint32_t apic_id = apic_ids->cpus[i].arch_id;
 
         if (apic_id < 255) {
-            AcpiSratProcessorAffinity *core;
-
-            core = acpi_data_push(table_data, sizeof *core);
-            core->type = ACPI_SRAT_PROCESSOR_APIC;
-            core->length = sizeof(*core);
-            core->local_apic_id = apic_id;
-            core->proximity_lo = node_id;
-            memset(core->proximity_hi, 0, 3);
-            core->local_sapic_eid = 0;
-            core->flags = cpu_to_le32(1);
+            /* 5.2.15.1 Processor Local APIC/SAPIC Affinity Structure */
+            build_append_int_noprefix(table_data, 0, 1);  /* Type  */
+            build_append_int_noprefix(table_data, 16, 1); /* Length */
+            /* Proximity Domain [7:0] */
+            build_append_int_noprefix(table_data, node_id, 1);
Quoted 8 lines

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 1962

Quoted 7 lines
hw/i386/acpi-build.c +7 -0
+            build_append_int_noprefix(table_data, apic_id, 1); /* APIC ID */
+            /* Flags, Table 5-36 */
+            build_append_int_noprefix(table_data, 1, 4);
+            build_append_int_noprefix(table_data, 0, 1); /* Local SAPIC EID */
+            /* Proximity Domain [31:8] */
+            build_append_int_noprefix(table_data, 0, 3);
+            build_append_int_noprefix(table_data, 0, 4); /* Reserved */  

clock domain?

not in 3.0, it was renamed later (4.0)

Quoted 101 lines
Quoted 87 lines
hw/i386/acpi-build.c +26 -19
         } else {
-            AcpiSratProcessorX2ApicAffinity *core;
-
-            core = acpi_data_push(table_data, sizeof *core);
-            core->type = ACPI_SRAT_PROCESSOR_x2APIC;
-            core->length = sizeof(*core);
-            core->x2apic_id = cpu_to_le32(apic_id);
-            core->proximity_domain = cpu_to_le32(node_id);
-            core->flags = cpu_to_le32(1);
+            /*
+             * ACPI spec, Revision 4.0
+             * 5.2.16.3 Processor Local x2APIC Affinity Structure
+             */
+            build_append_int_noprefix(table_data, 2, 1);  /* Type  */
+            build_append_int_noprefix(table_data, 24, 1); /* Length */
+            build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+            /* Proximity Domain */
+            build_append_int_noprefix(table_data, node_id, 4);
+            build_append_int_noprefix(table_data, apic_id, 4); /* X2APIC ID */
+            /* Flags, Table 5-39 */
+            build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+            build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
+            build_append_int_noprefix(table_data, 0, 4); /* Reserved */
         }
     }
 
-
     /* the memory map is a bit tricky, it contains at least one hole
      * from 640k-1M and possibly another one from 3.5G-4G.
      */
     next_base = 0;
-    numa_start = table_data->len;
+    numa_mem_start = table_data->len;
 
     for (i = 1; i < nb_numa_nodes + 1; ++i) {
         mem_base = next_base;
@@ -1985,8 +1994,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
             next_base > HOLE_640K_START) {
             mem_len -= next_base - HOLE_640K_START;
             if (mem_len > 0) {
-                numamem = acpi_data_push(table_data, sizeof *numamem);
-                build_srat_memory(numamem, mem_base, mem_len, i - 1,
+                build_srat_memory(table_data, mem_base, mem_len, i - 1,
                                   MEM_AFFINITY_ENABLED);
             }
 
@@ -2004,8 +2012,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
             next_base > x86ms->below_4g_mem_size) {
             mem_len -= next_base - x86ms->below_4g_mem_size;
             if (mem_len > 0) {
-                numamem = acpi_data_push(table_data, sizeof *numamem);
-                build_srat_memory(numamem, mem_base, mem_len, i - 1,
+                build_srat_memory(table_data, mem_base, mem_len, i - 1,
                                   MEM_AFFINITY_ENABLED);
             }
             mem_base = 1ULL << 32;
@@ -2014,8 +2021,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         }
 
         if (mem_len > 0) {
-            numamem = acpi_data_push(table_data, sizeof *numamem);
-            build_srat_memory(numamem, mem_base, mem_len, i - 1,
+            build_srat_memory(table_data, mem_base, mem_len, i - 1,
                               MEM_AFFINITY_ENABLED);
         }
     }
@@ -2024,10 +2030,15 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         nvdimm_build_srat(table_data);
     }
 
-    slots = (table_data->len - numa_start) / sizeof *numamem;
+    /*
+     * TODO: this part is not in ACPI spec and current linux kernel boots fine
+     * without these entries. But I recall there were issues the last time I
+     * tried to remove it with some ancient guest OS, however I can't remember
+     * what that was so keep this around for now
+     */
+    slots = (table_data->len - numa_mem_start) / 40 /* mem affinity len */;
     for (; slots < nb_numa_nodes + 2; slots++) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
+        build_srat_memory(table_data, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
     }
 
     /*

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 2056

Quoted 9 lines
hw/i386/acpi-build.c +1 -2
@@ -2039,8 +2050,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
      * providing _PXM method if necessary.
      */
     if (hotplugabble_address_space_size) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, machine->device_memory->base,
+        build_srat_memory(table_data, machine->device_memory->base,
                           hotplugabble_address_space_size, nb_numa_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }

Besides

Eric

#37 lore raw

Re: [PATCH v3 17/35] acpi: use build_append_int_noprefix() API to compose SRAT table

Quoted 272 lines · Igor Mammedov
Quoted 261 lines · On Wed, 22 Sep 2021 10:55:20 +0200 Eric Auger <[email protected]> wrote:
Quoted 260 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building SRAT tables for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v3:
* rebase on top of (e77af21a7a2 hw/i386/acpi-build: Get NUMA information from struct NumaState)
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 49 -----------------------
 include/hw/acpi/aml-build.h |  2 +-
 hw/acpi/aml-build.c         | 24 ++++++++----
 hw/acpi/nvdimm.c            |  4 +-
 hw/arm/virt-acpi-build.c    | 29 ++++++++------
 hw/i386/acpi-build.c        | 78 +++++++++++++++++++++----------------
 6 files changed, 80 insertions(+), 106 deletions(-)
include/hw/acpi/acpi-defs.h +0 -49
index 5826ee04b6..d293304f9c 100644
@@ -358,55 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-#define ACPI_SRAT_PROCESSOR_APIC     0
-#define ACPI_SRAT_MEMORY             1
-#define ACPI_SRAT_PROCESSOR_x2APIC   2
-#define ACPI_SRAT_PROCESSOR_GICC     3
-
-struct AcpiSratProcessorAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint8_t     proximity_lo;
-    uint8_t     local_apic_id;
-    uint32_t    flags;
-    uint8_t     local_sapic_eid;
-    uint8_t     proximity_hi[3];
-    uint32_t    reserved;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorAffinity AcpiSratProcessorAffinity;
-
-struct AcpiSratProcessorX2ApicAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint16_t    reserved;
-    uint32_t    proximity_domain;
-    uint32_t    x2apic_id;
-    uint32_t    flags;
-    uint32_t    clk_domain;
-    uint32_t    reserved2;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorX2ApicAffinity AcpiSratProcessorX2ApicAffinity;
-
-struct AcpiSratMemoryAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint16_t    reserved1;
-    uint64_t    base_addr;
-    uint64_t    range_length;
-    uint32_t    reserved2;
-    uint32_t    flags;
-    uint32_t    reserved3[2];
-} QEMU_PACKED;
-typedef struct AcpiSratMemoryAffinity AcpiSratMemoryAffinity;
-
-struct AcpiSratProcessorGiccAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint32_t    acpi_processor_uid;
-    uint32_t    flags;
-    uint32_t    clock_domain;
-} QEMU_PACKED;
-
-typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
include/hw/acpi/aml-build.h +1 -1
index 4242382399..6e1f42e119 100644
@@ -487,7 +487,7 @@ Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set, uint32_t io_offset,
                uint32_t mmio32_offset, uint64_t mmio64_offset,
                uint16_t bus_nr_offset);
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags);
 
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
hw/acpi/aml-build.c +17 -7
index 5e8bfb631c..050fdb3f37 100644
@@ -1936,15 +1936,25 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
     acpi_table_end(linker, &table);
 }
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+/*
+ * ACPI spec, Revision 4.0
+ * 5.2.16.2 Memory Affinity Structure
+ */
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags)
 {
-    numamem->type = ACPI_SRAT_MEMORY;
-    numamem->length = sizeof(*numamem);
-    numamem->proximity = cpu_to_le32(node);
-    numamem->flags = cpu_to_le32(flags);
-    numamem->base_addr = cpu_to_le64(base);
-    numamem->range_length = cpu_to_le64(len);
+    build_append_int_noprefix(table_data, 1, 1); /* Type */
+    build_append_int_noprefix(table_data, 40, 1); /* Length */
+    build_append_int_noprefix(table_data, node, 4); /* Proximity Domain */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    build_append_int_noprefix(table_data, base, 4); /* Base Address Low */
+    /* Base Address High */
+    build_append_int_noprefix(table_data, base >> 32, 4);
+    build_append_int_noprefix(table_data, len, 4); /* Length Low */
+    build_append_int_noprefix(table_data, len >> 32, 4); /* Length High */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, flags, 4); /* Flags */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 }
 
 /*
hw/acpi/nvdimm.c +1 -3
index e050b47c2b..baab81f7a6 100644
@@ -1336,7 +1336,6 @@ void nvdimm_build_srat(GArray *table_data)
     GSList *device_list = nvdimm_get_device_list();
 
     for (; device_list; device_list = device_list->next) {
-        AcpiSratMemoryAffinity *numamem = NULL;
         DeviceState *dev = device_list->data;
         Object *obj = OBJECT(dev);
         uint64_t addr, size;
@@ -1346,8 +1345,7 @@ void nvdimm_build_srat(GArray *table_data)
         addr = object_property_get_uint(obj, PC_DIMM_ADDR_PROP, &error_abort);
         size = object_property_get_uint(obj, PC_DIMM_SIZE_PROP, &error_abort);
 
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, addr, size, node,
+        build_srat_memory(table_data, addr, size, node,
                           MEM_AFFINITY_ENABLED | MEM_AFFINITY_NON_VOLATILE);
     }
     g_slist_free(device_list);
hw/arm/virt-acpi-build.c +17 -12
index 21efe7fe34..6ba02cf281 100644
@@ -474,11 +474,13 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
+/*
+ * ACPI spec, Revision 5.1
+ * 5.2.16 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSratProcessorGiccAffinity *core;
-    AcpiSratMemoryAffinity *numamem;
     int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
@@ -492,19 +494,23 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
-        core = acpi_data_push(table_data, sizeof(*core));
-        core->type = ACPI_SRAT_PROCESSOR_GICC;
-        core->length = sizeof(*core);
-        core->proximity = cpu_to_le32(cpu_list->cpus[i].props.node_id);
-        core->acpi_processor_uid = cpu_to_le32(i);
-        core->flags = cpu_to_le32(1);
+        uint32_t nodeid = cpu_list->cpus[i].props.node_id;
+        /*
+         * 5.2.16.4 GICC Affinity Structure
+         */
+        build_append_int_noprefix(table_data, 3, 1);      /* Type */
+        build_append_int_noprefix(table_data, 18, 1);     /* Length */
+        build_append_int_noprefix(table_data, nodeid, 4); /* Proximity Domain */
+        build_append_int_noprefix(table_data, i, 4); /* ACPI Processor UID */
+        /* Flags, Table 5-76 */
+        build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
     }
 
     mem_base = vms->memmap[VIRT_MEM].base;
     for (i = 0; i < ms->numa_state->num_nodes; ++i) {
         if (ms->numa_state->nodes[i].node_mem > 0) {
-            numamem = acpi_data_push(table_data, sizeof(*numamem));
-            build_srat_memory(numamem, mem_base,
+            build_srat_memory(table_data, mem_base,
                               ms->numa_state->nodes[i].node_mem, i,
                               MEM_AFFINITY_ENABLED);
             mem_base += ms->numa_state->nodes[i].node_mem;
@@ -516,8 +522,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     if (ms->device_memory) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, ms->device_memory->base,
+        build_srat_memory(table_data, ms->device_memory->base,
                           memory_region_size(&ms->device_memory->mr),
                           ms->numa_state->num_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
hw/i386/acpi-build.c +10 -13
index 41c0a63b30..51e0ba07b6 100644
@@ -1917,13 +1917,15 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 #define HOLE_640K_START  (640 * KiB)
 #define HOLE_640K_END   (1 * MiB)
 
+/*
+ * ACPI spec, Revision 3.0
+ * 5.2.15 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSratMemoryAffinity *numamem;
-
     int i;
-    int numa_start, slots;
+    int numa_mem_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1946,34 +1948,41 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         uint32_t apic_id = apic_ids->cpus[i].arch_id;
 
         if (apic_id < 255) {
-            AcpiSratProcessorAffinity *core;
-
-            core = acpi_data_push(table_data, sizeof *core);
-            core->type = ACPI_SRAT_PROCESSOR_APIC;
-            core->length = sizeof(*core);
-            core->local_apic_id = apic_id;
-            core->proximity_lo = node_id;
-            memset(core->proximity_hi, 0, 3);
-            core->local_sapic_eid = 0;
-            core->flags = cpu_to_le32(1);
+            /* 5.2.15.1 Processor Local APIC/SAPIC Affinity Structure */
+            build_append_int_noprefix(table_data, 0, 1);  /* Type  */
+            build_append_int_noprefix(table_data, 16, 1); /* Length */
+            /* Proximity Domain [7:0] */
+            build_append_int_noprefix(table_data, node_id, 1);
Quoted 8 lines

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 1962

Quoted 7 lines
hw/i386/acpi-build.c +7 -0
+            build_append_int_noprefix(table_data, apic_id, 1); /* APIC ID */
+            /* Flags, Table 5-36 */
+            build_append_int_noprefix(table_data, 1, 4);
+            build_append_int_noprefix(table_data, 0, 1); /* Local SAPIC EID */
+            /* Proximity Domain [31:8] */
+            build_append_int_noprefix(table_data, 0, 3);
+            build_append_int_noprefix(table_data, 0, 4); /* Reserved */  

clock domain?

Quoted 1 line

not in 3.0, it was renamed later (4.0)

OK I must have looked at some other version. Not always easy to find older ones.

Eric

Quoted 103 lines
Quoted 102 lines
Quoted 88 lines
hw/i386/acpi-build.c +26 -19
         } else {
-            AcpiSratProcessorX2ApicAffinity *core;
-
-            core = acpi_data_push(table_data, sizeof *core);
-            core->type = ACPI_SRAT_PROCESSOR_x2APIC;
-            core->length = sizeof(*core);
-            core->x2apic_id = cpu_to_le32(apic_id);
-            core->proximity_domain = cpu_to_le32(node_id);
-            core->flags = cpu_to_le32(1);
+            /*
+             * ACPI spec, Revision 4.0
+             * 5.2.16.3 Processor Local x2APIC Affinity Structure
+             */
+            build_append_int_noprefix(table_data, 2, 1);  /* Type  */
+            build_append_int_noprefix(table_data, 24, 1); /* Length */
+            build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+            /* Proximity Domain */
+            build_append_int_noprefix(table_data, node_id, 4);
+            build_append_int_noprefix(table_data, apic_id, 4); /* X2APIC ID */
+            /* Flags, Table 5-39 */
+            build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+            build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
+            build_append_int_noprefix(table_data, 0, 4); /* Reserved */
         }
     }
 
-
     /* the memory map is a bit tricky, it contains at least one hole
      * from 640k-1M and possibly another one from 3.5G-4G.
      */
     next_base = 0;
-    numa_start = table_data->len;
+    numa_mem_start = table_data->len;
 
     for (i = 1; i < nb_numa_nodes + 1; ++i) {
         mem_base = next_base;
@@ -1985,8 +1994,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
             next_base > HOLE_640K_START) {
             mem_len -= next_base - HOLE_640K_START;
             if (mem_len > 0) {
-                numamem = acpi_data_push(table_data, sizeof *numamem);
-                build_srat_memory(numamem, mem_base, mem_len, i - 1,
+                build_srat_memory(table_data, mem_base, mem_len, i - 1,
                                   MEM_AFFINITY_ENABLED);
             }
 
@@ -2004,8 +2012,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
             next_base > x86ms->below_4g_mem_size) {
             mem_len -= next_base - x86ms->below_4g_mem_size;
             if (mem_len > 0) {
-                numamem = acpi_data_push(table_data, sizeof *numamem);
-                build_srat_memory(numamem, mem_base, mem_len, i - 1,
+                build_srat_memory(table_data, mem_base, mem_len, i - 1,
                                   MEM_AFFINITY_ENABLED);
             }
             mem_base = 1ULL << 32;
@@ -2014,8 +2021,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         }
 
         if (mem_len > 0) {
-            numamem = acpi_data_push(table_data, sizeof *numamem);
-            build_srat_memory(numamem, mem_base, mem_len, i - 1,
+            build_srat_memory(table_data, mem_base, mem_len, i - 1,
                               MEM_AFFINITY_ENABLED);
         }
     }
@@ -2024,10 +2030,15 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
         nvdimm_build_srat(table_data);
     }
 
-    slots = (table_data->len - numa_start) / sizeof *numamem;
+    /*
+     * TODO: this part is not in ACPI spec and current linux kernel boots fine
+     * without these entries. But I recall there were issues the last time I
+     * tried to remove it with some ancient guest OS, however I can't remember
+     * what that was so keep this around for now
+     */
+    slots = (table_data->len - numa_mem_start) / 40 /* mem affinity len */;
     for (; slots < nb_numa_nodes + 2; slots++) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
+        build_srat_memory(table_data, 0, 0, 0, MEM_AFFINITY_NOFLAGS);
     }
 
     /*

hw/i386/acpi-build.c build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine) · line 2056

Quoted 9 lines
hw/i386/acpi-build.c +1 -2
@@ -2039,8 +2050,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
      * providing _PXM method if necessary.
      */
     if (hotplugabble_address_space_size) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, machine->device_memory->base,
+        build_srat_memory(table_data, machine->device_memory->base,
                           hotplugabble_address_space_size, nb_numa_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }

Besides

Eric

#38 lore raw

PATCH v3 18/35 acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries tables.

---
v3:
- rebase on top 26863366b29 (hw/i386/acpi-build: Add DMAR support to bypass iommu)
- s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 68 --------------------------
 hw/i386/acpi-build.c        | 97 ++++++++++++++++++++-----------------
 2 files changed, 53 insertions(+), 112 deletions(-)
include/hw/acpi/acpi-defs.h +0 -68
index d293304f9c..c4f0a202e8 100644
@@ -358,74 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/* DMAR - DMA Remapping table r2.2 */
-struct AcpiTableDmar {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t host_address_width; /* Maximum DMA physical addressability */
-    uint8_t flags;
-    uint8_t reserved[10];
-} QEMU_PACKED;
-typedef struct AcpiTableDmar AcpiTableDmar;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INTR_REMAP        1
-#define ACPI_DMAR_X2APIC_OPT_OUT    (1 << 1)
-
-/* Values for sub-structure type for DMAR */
-enum {
-    ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,       /* DRHD */
-    ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,     /* RMRR */
-    ACPI_DMAR_TYPE_ATSR = 2,                /* ATSR */
-    ACPI_DMAR_TYPE_HARDWARE_AFFINITY = 3,   /* RHSR */
-    ACPI_DMAR_TYPE_ANDD = 4,                /* ANDD */
-    ACPI_DMAR_TYPE_RESERVED = 5             /* Reserved for furture use */
-};
-
-/*
- * Sub-structures for DMAR
- */
-
-/* Device scope structure for DRHD. */
-struct AcpiDmarDeviceScope {
-    uint8_t entry_type;
-    uint8_t length;
-    uint16_t reserved;
-    uint8_t enumeration_id;
-    uint8_t bus;
-    struct {
-        uint8_t device;
-        uint8_t function;
-    } path[];
-} QEMU_PACKED;
-typedef struct AcpiDmarDeviceScope AcpiDmarDeviceScope;
-
-/* Type 0: Hardware Unit Definition */
-struct AcpiDmarHardwareUnit {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;   /* The PCI Segment associated with this unit */
-    uint64_t address;   /* Base address of remapping hardware register-set */
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarHardwareUnit AcpiDmarHardwareUnit;
-
-/* Type 2: Root Port ATS Capability Reporting Structure */
-struct AcpiDmarRootPortATS {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarRootPortATS AcpiDmarRootPortATS;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INCLUDE_PCI_ALL   1
-#define ACPI_DMAR_ATSR_ALL_PORTS    1
-
 /*
  * Input Output Remapping Table (IORT)
  * Conforms to "IO Remapping Table System Software on ARM Platforms",
hw/i386/acpi-build.c +53 -44

143 lines not on this page · raw message

Signature · 1 line
2.27.0
Reviewed-by on v3 18/35
#39 lore raw

Re: [PATCH v3 18/35] acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 167 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries tables.

---
v3:
- rebase on top 26863366b29 (hw/i386/acpi-build: Add DMAR support to bypass iommu)
- s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 68 --------------------------
 hw/i386/acpi-build.c        | 97 ++++++++++++++++++++-----------------
 2 files changed, 53 insertions(+), 112 deletions(-)
include/hw/acpi/acpi-defs.h +0 -68
index d293304f9c..c4f0a202e8 100644
@@ -358,74 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/* DMAR - DMA Remapping table r2.2 */
-struct AcpiTableDmar {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t host_address_width; /* Maximum DMA physical addressability */
-    uint8_t flags;
-    uint8_t reserved[10];
-} QEMU_PACKED;
-typedef struct AcpiTableDmar AcpiTableDmar;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INTR_REMAP        1
-#define ACPI_DMAR_X2APIC_OPT_OUT    (1 << 1)
-
-/* Values for sub-structure type for DMAR */
-enum {
-    ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,       /* DRHD */
-    ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,     /* RMRR */
-    ACPI_DMAR_TYPE_ATSR = 2,                /* ATSR */
-    ACPI_DMAR_TYPE_HARDWARE_AFFINITY = 3,   /* RHSR */
-    ACPI_DMAR_TYPE_ANDD = 4,                /* ANDD */
-    ACPI_DMAR_TYPE_RESERVED = 5             /* Reserved for furture use */
-};
-
-/*
- * Sub-structures for DMAR
- */
-
-/* Device scope structure for DRHD. */
-struct AcpiDmarDeviceScope {
-    uint8_t entry_type;
-    uint8_t length;
-    uint16_t reserved;
-    uint8_t enumeration_id;
-    uint8_t bus;
-    struct {
-        uint8_t device;
-        uint8_t function;
-    } path[];
-} QEMU_PACKED;
-typedef struct AcpiDmarDeviceScope AcpiDmarDeviceScope;
-
-/* Type 0: Hardware Unit Definition */
-struct AcpiDmarHardwareUnit {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;   /* The PCI Segment associated with this unit */
-    uint64_t address;   /* Base address of remapping hardware register-set */
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarHardwareUnit AcpiDmarHardwareUnit;
-
-/* Type 2: Root Port ATS Capability Reporting Structure */
-struct AcpiDmarRootPortATS {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarRootPortATS AcpiDmarRootPortATS;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INCLUDE_PCI_ALL   1
-#define ACPI_DMAR_ATSR_ALL_PORTS    1
-
 /*
  * Input Output Remapping Table (IORT)
  * Conforms to "IO Remapping Table System Software on ARM Platforms",
hw/i386/acpi-build.c +18 -13
index 51e0ba07b6..2875c4f393 100644
@@ -2064,8 +2064,9 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 static void
 insert_scope(PCIBus *bus, PCIDevice *dev, void *opaque)
 {
+    const size_t device_scope_size = 6 /* device scope structure */ +
+                                     2 /* 1 path entry */;
     GArray *scope_blob = opaque;
-    AcpiDmarDeviceScope *scope = NULL;
 
     if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) {
         /* Dmar Scope Type: 0x02 for PCI Bridge */
@@ -2076,8 +2077,7 @@ insert_scope(PCIBus *bus, PCIDevice *dev, void *opaque)
     }
 
     /* length */
-    build_append_int_noprefix(scope_blob,
-                              sizeof(*scope) + sizeof(scope->path[0]), 1);
+    build_append_int_noprefix(scope_blob, device_scope_size, 1);
     /* reserved */
     build_append_int_noprefix(scope_blob, 0, 2);
     /* enumeration_id */
@@ -2109,26 +2109,31 @@ dmar_host_bridges(Object *obj, void *opaque)
 }
 
 /*
- * VT-d spec 8.1 DMA Remapping Reporting Structure
- * (version Oct. 2014 or later)
+ * Intel ® Virtualization Technology for Directed I/O
+ * Architecture Specification. Revision 3.3
+ * 8.1 DMA Remapping Reporting Structure
  */
 static void
 build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                const char *oem_table_id)
 {
-    int dmar_start = table_data->len;
-
-    AcpiTableDmar *dmar;
-    AcpiDmarHardwareUnit *drhd;
-    AcpiDmarRootPortATS *atsr;
     uint8_t dmar_flags = 0;
+    uint8_t rsvd10[10] = {};
+    /* Root complex IOAPIC uses one path only */
+    const size_t ioapic_scope_size = 6 /* device scope structure */ +
+                                     2 /* 1 path entry */;
     X86IOMMUState *iommu = x86_iommu_get_default();
-    AcpiDmarDeviceScope *scope = NULL;
-    /* Root complex IOAPIC use one path[0] only */
-    size_t ioapic_scope_size = sizeof(*scope) + sizeof(scope->path[0]);
     IntelIOMMUState *intel_iommu = INTEL_IOMMU_DEVICE(iommu);
     GArray *scope_blob = g_array_new(false, true, 1);
 
+    AcpiTable table = { .sig = "DMAR", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
+
+    assert(iommu);
+    if (x86_iommu_ir_supported(iommu)) {
+        dmar_flags |= 0x1;      /* Flags: 0x1: INT_REMAP */
+    }
+
     /*
      * A PCI bus walk, for each PCI host bridge.
      * Insert scope for each PCI bridge and endpoint device which

hw/i386/acpi-build.c build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2143

Quoted 7 lines
hw/i386/acpi-build.c +0 -4
@@ -2137,48 +2142,52 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id,
     object_child_foreach_recursive(object_get_root(),
                                    dmar_host_bridges, scope_blob);
 
-    assert(iommu);
-    if (x86_iommu_ir_supported(iommu)) {
-        dmar_flags |= 0x1;      /* Flags: 0x1: INT_REMAP */
-    }

why this move?

Quoted 55 lines
hw/i386/acpi-build.c +28 -20
-
-    dmar = acpi_data_push(table_data, sizeof(*dmar));
-    dmar->host_address_width = intel_iommu->aw_bits - 1;
-    dmar->flags = dmar_flags;
-
-    /* DMAR Remapping Hardware Unit Definition structure */
-    drhd = acpi_data_push(table_data, sizeof(*drhd) + ioapic_scope_size);
-    drhd->type = cpu_to_le16(ACPI_DMAR_TYPE_HARDWARE_UNIT);
-    drhd->length =
-        cpu_to_le16(sizeof(*drhd) + ioapic_scope_size + scope_blob->len);
-    drhd->flags = 0;            /* Don't include all pci device */
-    drhd->pci_segment = cpu_to_le16(0);
-    drhd->address = cpu_to_le64(Q35_HOST_BRIDGE_IOMMU_ADDR);
+    acpi_table_begin(&table, table_data);
+    /* Host Address Width */
+    build_append_int_noprefix(table_data, intel_iommu->aw_bits - 1, 1);
+    build_append_int_noprefix(table_data, dmar_flags, 1); /* Flags */
+    g_array_append_vals(table_data, rsvd10, sizeof(rsvd10)); /* Reserved */
+
+    /* 8.3 DMAR Remapping Hardware Unit Definition structure */
+    build_append_int_noprefix(table_data, 0, 2); /* Type */
+    /* Length */
+    build_append_int_noprefix(table_data,
+                              16 + ioapic_scope_size + scope_blob->len, 2);
+    /* Flags */
+    build_append_int_noprefix(table_data, 0 /* Don't include all pci device */ ,
+                              1);
+    build_append_int_noprefix(table_data, 0 , 1); /* Reserved */
+    build_append_int_noprefix(table_data, 0 , 2); /* Segment Number */
+    /* Register Base Address */
+    build_append_int_noprefix(table_data, Q35_HOST_BRIDGE_IOMMU_ADDR , 8);
 
     /* Scope definition for the root-complex IOAPIC. See VT-d spec
      * 8.3.1 (version Oct. 2014 or later). */
-    scope = &drhd->scope[0];
-    scope->entry_type = 0x03;   /* Type: 0x03 for IOAPIC */
-    scope->length = ioapic_scope_size;
-    scope->enumeration_id = ACPI_BUILD_IOAPIC_ID;
-    scope->bus = Q35_PSEUDO_BUS_PLATFORM;
-    scope->path[0].device = PCI_SLOT(Q35_PSEUDO_DEVFN_IOAPIC);
-    scope->path[0].function = PCI_FUNC(Q35_PSEUDO_DEVFN_IOAPIC);
+    build_append_int_noprefix(table_data, 0x03 /* IOAPIC */, 1); /* Type */
+    build_append_int_noprefix(table_data, ioapic_scope_size, 1); /* Length */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    /* Enumeration ID */
+    build_append_int_noprefix(table_data, ACPI_BUILD_IOAPIC_ID, 1);
+    /* Start Bus Number */
+    build_append_int_noprefix(table_data, Q35_PSEUDO_BUS_PLATFORM, 1);
+    /* Path, {Device, Function} pair */
+    build_append_int_noprefix(table_data, PCI_SLOT(Q35_PSEUDO_DEVFN_IOAPIC), 1);
+    build_append_int_noprefix(table_data, PCI_FUNC(Q35_PSEUDO_DEVFN_IOAPIC), 1);
 
     /* Add scope found above */
     g_array_append_vals(table_data, scope_blob->data, scope_blob->len);
     g_array_free(scope_blob, true);

hw/i386/acpi-build.c build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2184

Quoted 10 lines
hw/i386/acpi-build.c +3 -5
 
     if (iommu->dt_supported) {
-        atsr = acpi_data_push(table_data, sizeof(*atsr));
-        atsr->type = cpu_to_le16(ACPI_DMAR_TYPE_ATSR);
-        atsr->length = cpu_to_le16(sizeof(*atsr));
-        atsr->flags = ACPI_DMAR_ATSR_ALL_PORTS;
-        atsr->pci_segment = cpu_to_le16(0);
+        /* 8.5 Root Port ATS Capability Reporting Structure */
+        build_append_int_noprefix(table_data, 2, 2); /* Type */
+        build_append_int_noprefix(table_data, 8, 2); /* Length */

8 + no device scope

hw/i386/acpi-build.c build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2193

Quoted 12 lines
hw/i386/acpi-build.c +4 -2
+        build_append_int_noprefix(table_data, 1 /* ALL_PORTS */, 1); /* Flags */
+        build_append_int_noprefix(table_data, 0, 1); /* Reserved */
+        build_append_int_noprefix(table_data, 0, 2); /* Segment Number */
     }
 
-    build_header(linker, table_data, (void *)(table_data->data + dmar_start),
-                 "DMAR", table_data->len - dmar_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*

Besides

Eric

#40 lore raw

Re: [PATCH v3 18/35] acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 171 lines · On Wed, 22 Sep 2021 11:19:05 +0200 Eric Auger <[email protected]> wrote:
Quoted 170 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries tables.

---
v3:
- rebase on top 26863366b29 (hw/i386/acpi-build: Add DMAR support to bypass iommu)
- s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 68 --------------------------
 hw/i386/acpi-build.c        | 97 ++++++++++++++++++++-----------------
 2 files changed, 53 insertions(+), 112 deletions(-)
include/hw/acpi/acpi-defs.h +0 -68
index d293304f9c..c4f0a202e8 100644
@@ -358,74 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/* DMAR - DMA Remapping table r2.2 */
-struct AcpiTableDmar {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t host_address_width; /* Maximum DMA physical addressability */
-    uint8_t flags;
-    uint8_t reserved[10];
-} QEMU_PACKED;
-typedef struct AcpiTableDmar AcpiTableDmar;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INTR_REMAP        1
-#define ACPI_DMAR_X2APIC_OPT_OUT    (1 << 1)
-
-/* Values for sub-structure type for DMAR */
-enum {
-    ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,       /* DRHD */
-    ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,     /* RMRR */
-    ACPI_DMAR_TYPE_ATSR = 2,                /* ATSR */
-    ACPI_DMAR_TYPE_HARDWARE_AFFINITY = 3,   /* RHSR */
-    ACPI_DMAR_TYPE_ANDD = 4,                /* ANDD */
-    ACPI_DMAR_TYPE_RESERVED = 5             /* Reserved for furture use */
-};
-
-/*
- * Sub-structures for DMAR
- */
-
-/* Device scope structure for DRHD. */
-struct AcpiDmarDeviceScope {
-    uint8_t entry_type;
-    uint8_t length;
-    uint16_t reserved;
-    uint8_t enumeration_id;
-    uint8_t bus;
-    struct {
-        uint8_t device;
-        uint8_t function;
-    } path[];
-} QEMU_PACKED;
-typedef struct AcpiDmarDeviceScope AcpiDmarDeviceScope;
-
-/* Type 0: Hardware Unit Definition */
-struct AcpiDmarHardwareUnit {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;   /* The PCI Segment associated with this unit */
-    uint64_t address;   /* Base address of remapping hardware register-set */
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarHardwareUnit AcpiDmarHardwareUnit;
-
-/* Type 2: Root Port ATS Capability Reporting Structure */
-struct AcpiDmarRootPortATS {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarRootPortATS AcpiDmarRootPortATS;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INCLUDE_PCI_ALL   1
-#define ACPI_DMAR_ATSR_ALL_PORTS    1
-
 /*
  * Input Output Remapping Table (IORT)
  * Conforms to "IO Remapping Table System Software on ARM Platforms",
hw/i386/acpi-build.c +18 -13
index 51e0ba07b6..2875c4f393 100644
@@ -2064,8 +2064,9 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 static void
 insert_scope(PCIBus *bus, PCIDevice *dev, void *opaque)
 {
+    const size_t device_scope_size = 6 /* device scope structure */ +
+                                     2 /* 1 path entry */;
     GArray *scope_blob = opaque;
-    AcpiDmarDeviceScope *scope = NULL;
 
     if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) {
         /* Dmar Scope Type: 0x02 for PCI Bridge */
@@ -2076,8 +2077,7 @@ insert_scope(PCIBus *bus, PCIDevice *dev, void *opaque)
     }
 
     /* length */
-    build_append_int_noprefix(scope_blob,
-                              sizeof(*scope) + sizeof(scope->path[0]), 1);
+    build_append_int_noprefix(scope_blob, device_scope_size, 1);
     /* reserved */
     build_append_int_noprefix(scope_blob, 0, 2);
     /* enumeration_id */
@@ -2109,26 +2109,31 @@ dmar_host_bridges(Object *obj, void *opaque)
 }
 
 /*
- * VT-d spec 8.1 DMA Remapping Reporting Structure
- * (version Oct. 2014 or later)
+ * Intel ® Virtualization Technology for Directed I/O
+ * Architecture Specification. Revision 3.3
+ * 8.1 DMA Remapping Reporting Structure
  */
 static void
 build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                const char *oem_table_id)
 {
-    int dmar_start = table_data->len;
-
-    AcpiTableDmar *dmar;
-    AcpiDmarHardwareUnit *drhd;
-    AcpiDmarRootPortATS *atsr;
     uint8_t dmar_flags = 0;
+    uint8_t rsvd10[10] = {};
+    /* Root complex IOAPIC uses one path only */
+    const size_t ioapic_scope_size = 6 /* device scope structure */ +
+                                     2 /* 1 path entry */;
     X86IOMMUState *iommu = x86_iommu_get_default();
-    AcpiDmarDeviceScope *scope = NULL;
-    /* Root complex IOAPIC use one path[0] only */
-    size_t ioapic_scope_size = sizeof(*scope) + sizeof(scope->path[0]);
     IntelIOMMUState *intel_iommu = INTEL_IOMMU_DEVICE(iommu);
     GArray *scope_blob = g_array_new(false, true, 1);
 
+    AcpiTable table = { .sig = "DMAR", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
+
+    assert(iommu);
+    if (x86_iommu_ir_supported(iommu)) {
+        dmar_flags |= 0x1;      /* Flags: 0x1: INT_REMAP */
+    }
+
     /*
      * A PCI bus walk, for each PCI host bridge.
      * Insert scope for each PCI bridge and endpoint device which
@@ -2137,48 +2142,52 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id,
     object_child_foreach_recursive(object_get_root(),
                                    dmar_host_bridges, scope_blob);
 
Quoted 6 lines

hw/i386/acpi-build.c build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2143

Quoted 4 lines
hw/i386/acpi-build.c +0 -4
-    assert(iommu);
-    if (x86_iommu_ir_supported(iommu)) {
-        dmar_flags |= 0x1;      /* Flags: 0x1: INT_REMAP */
-    }  

why this move?

it's not really necessary/related, probably it was moved to be closer to other variables initialization.

Quoted 56 lines
Quoted 56 lines
hw/i386/acpi-build.c +28 -20
-
-    dmar = acpi_data_push(table_data, sizeof(*dmar));
-    dmar->host_address_width = intel_iommu->aw_bits - 1;
-    dmar->flags = dmar_flags;
-
-    /* DMAR Remapping Hardware Unit Definition structure */
-    drhd = acpi_data_push(table_data, sizeof(*drhd) + ioapic_scope_size);
-    drhd->type = cpu_to_le16(ACPI_DMAR_TYPE_HARDWARE_UNIT);
-    drhd->length =
-        cpu_to_le16(sizeof(*drhd) + ioapic_scope_size + scope_blob->len);
-    drhd->flags = 0;            /* Don't include all pci device */
-    drhd->pci_segment = cpu_to_le16(0);
-    drhd->address = cpu_to_le64(Q35_HOST_BRIDGE_IOMMU_ADDR);
+    acpi_table_begin(&table, table_data);
+    /* Host Address Width */
+    build_append_int_noprefix(table_data, intel_iommu->aw_bits - 1, 1);
+    build_append_int_noprefix(table_data, dmar_flags, 1); /* Flags */
+    g_array_append_vals(table_data, rsvd10, sizeof(rsvd10)); /* Reserved */
+
+    /* 8.3 DMAR Remapping Hardware Unit Definition structure */
+    build_append_int_noprefix(table_data, 0, 2); /* Type */
+    /* Length */
+    build_append_int_noprefix(table_data,
+                              16 + ioapic_scope_size + scope_blob->len, 2);
+    /* Flags */
+    build_append_int_noprefix(table_data, 0 /* Don't include all pci device */ ,
+                              1);
+    build_append_int_noprefix(table_data, 0 , 1); /* Reserved */
+    build_append_int_noprefix(table_data, 0 , 2); /* Segment Number */
+    /* Register Base Address */
+    build_append_int_noprefix(table_data, Q35_HOST_BRIDGE_IOMMU_ADDR , 8);
 
     /* Scope definition for the root-complex IOAPIC. See VT-d spec
      * 8.3.1 (version Oct. 2014 or later). */
-    scope = &drhd->scope[0];
-    scope->entry_type = 0x03;   /* Type: 0x03 for IOAPIC */
-    scope->length = ioapic_scope_size;
-    scope->enumeration_id = ACPI_BUILD_IOAPIC_ID;
-    scope->bus = Q35_PSEUDO_BUS_PLATFORM;
-    scope->path[0].device = PCI_SLOT(Q35_PSEUDO_DEVFN_IOAPIC);
-    scope->path[0].function = PCI_FUNC(Q35_PSEUDO_DEVFN_IOAPIC);
+    build_append_int_noprefix(table_data, 0x03 /* IOAPIC */, 1); /* Type */
+    build_append_int_noprefix(table_data, ioapic_scope_size, 1); /* Length */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    /* Enumeration ID */
+    build_append_int_noprefix(table_data, ACPI_BUILD_IOAPIC_ID, 1);
+    /* Start Bus Number */
+    build_append_int_noprefix(table_data, Q35_PSEUDO_BUS_PLATFORM, 1);
+    /* Path, {Device, Function} pair */
+    build_append_int_noprefix(table_data, PCI_SLOT(Q35_PSEUDO_DEVFN_IOAPIC), 1);
+    build_append_int_noprefix(table_data, PCI_FUNC(Q35_PSEUDO_DEVFN_IOAPIC), 1);
 
     /* Add scope found above */
     g_array_append_vals(table_data, scope_blob->data, scope_blob->len);
     g_array_free(scope_blob, true);
 
Quoted 11 lines

hw/i386/acpi-build.c build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2184

Quoted 9 lines
hw/i386/acpi-build.c +3 -5
     if (iommu->dt_supported) {
-        atsr = acpi_data_push(table_data, sizeof(*atsr));
-        atsr->type = cpu_to_le16(ACPI_DMAR_TYPE_ATSR);
-        atsr->length = cpu_to_le16(sizeof(*atsr));
-        atsr->flags = ACPI_DMAR_ATSR_ALL_PORTS;
-        atsr->pci_segment = cpu_to_le16(0);
+        /* 8.5 Root Port ATS Capability Reporting Structure */
+        build_append_int_noprefix(table_data, 2, 2); /* Type */
+        build_append_int_noprefix(table_data, 8, 2); /* Length */  

8 + no device scope

yep, but given no device scope implemented I didn't see a need to mention it at all.

Quoted 17 lines

hw/i386/acpi-build.c build_dmar_q35(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2193

Quoted 12 lines
hw/i386/acpi-build.c +4 -2
+        build_append_int_noprefix(table_data, 1 /* ALL_PORTS */, 1); /* Flags */
+        build_append_int_noprefix(table_data, 0, 1); /* Reserved */
+        build_append_int_noprefix(table_data, 0, 2); /* Segment Number */
     }
 
-    build_header(linker, table_data, (void *)(table_data->data + dmar_start),
-                 "DMAR", table_data->len - dmar_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*

Besides

Eric

#41 lore raw

PATCH v3 19/35 acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/i386/acpi-build.c +4 -6
index 2875c4f393..45724469b0 100644
@@ -2201,10 +2201,10 @@ static void
 build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
            const char *oem_table_id)
 {
-    int waet_start = table_data->len;
+    AcpiTable table = { .sig = "WAET", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    /* WAET header */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
     /*
      * Set "ACPI PM timer good" flag.
      *
@@ -2213,9 +2213,7 @@ build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
      * Which avoids costly VMExits caused by guest re-reading it unnecessarily.
      */
     build_append_int_noprefix(table_data, 1 << 1 /* ACPI PM timer good */, 4);
-
-    build_header(linker, table_data, (void *)(table_data->data + waet_start),
-                 "WAET", table_data->len - waet_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*
Signature · 1 line
2.27.0
Reviewed-by on v3 19/35
#42 lore raw

Re: [PATCH v3 19/35] acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 34 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/i386/acpi-build.c +3 -3
index 2875c4f393..45724469b0 100644
@@ -2201,10 +2201,10 @@ static void
 build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
            const char *oem_table_id)
 {
-    int waet_start = table_data->len;
+    AcpiTable table = { .sig = "WAET", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    /* WAET header */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
     /*
      * Set "ACPI PM timer good" flag.
      *

hw/i386/acpi-build.c build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2219

Quoted 10 lines
hw/i386/acpi-build.c +1 -3
@@ -2213,9 +2213,7 @@ build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
      * Which avoids costly VMExits caused by guest re-reading it unnecessarily.
      */
     build_append_int_noprefix(table_data, 1 << 1 /* ACPI PM timer good */, 4);
-
-    build_header(linker, table_data, (void *)(table_data->data + waet_start),
-                 "WAET", table_data->len - waet_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*

an easy one

Eric

#43 lore raw

PATCH v3 20/35 acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
hw/i386/acpi-build.c +4 -7
index 45724469b0..9f888d5a2c 100644
@@ -2319,12 +2319,12 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                 const char *oem_table_id)
 {
     int ivhd_table_len = 24;
-    int iommu_start = table_data->len;
     AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default());
     GArray *ivhd_blob = g_array_new(false, true, 1);
+    AcpiTable table = { .sig = "IVRS", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    /* IVRS header */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
     /* IVinfo - IO virtualization information common to all
      * IOMMU units in a system
      */
@@ -2409,10 +2409,7 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                                  0x48,                      /* special device */
                                  8);
     }
-
-    build_header(linker, table_data, (void *)(table_data->data + iommu_start),
-                 "IVRS", table_data->len - iommu_start, 1, oem_id,
-                 oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 typedef
Signature · 1 line
2.27.0
Reviewed-by on v3 20/35
#44 lore raw

Re: [PATCH v3 20/35] acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 37 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
hw/i386/acpi-build.c +3 -3
index 45724469b0..9f888d5a2c 100644
@@ -2319,12 +2319,12 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                 const char *oem_table_id)
 {
     int ivhd_table_len = 24;
-    int iommu_start = table_data->len;
     AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default());
     GArray *ivhd_blob = g_array_new(false, true, 1);
+    AcpiTable table = { .sig = "IVRS", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    /* IVRS header */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
     /* IVinfo - IO virtualization information common to all
      * IOMMU units in a system
      */
@@ -2409,10 +2409,7 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                                  0x48,                      /* special device */

hw/i386/acpi-build.c build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id, · line 2415

Quoted 10 lines
hw/i386/acpi-build.c +1 -4
                                  8);
     }
-
-    build_header(linker, table_data, (void *)(table_data->data + iommu_start),
-                 "IVRS", table_data->len - iommu_start, 1, oem_id,
-                 oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 typedef

Eric

#45 lore raw

PATCH v3 21/35 acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h |  9 ---------
 hw/arm/virt-acpi-build.c    | 19 +++++++++++--------
 hw/i386/acpi-common.c       | 19 +++++++++++--------
 3 files changed, 22 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -9
index c4f0a202e8..c7fa5caa06 100644
@@ -176,15 +176,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 #define ACPI_DUAL_PIC                0
 #define ACPI_MULTIPLE_APIC           1
 
-/* Master MADT */
-
-struct AcpiMultipleApicTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t local_apic_address;     /* Physical address of local APIC */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
-
 /* Values for Type in APIC sub-headers */
 
 #define ACPI_APIC_PROCESSOR          0
hw/arm/virt-acpi-build.c +11 -8
index 6ba02cf281..e3bdcd44e8 100644
@@ -567,19 +567,26 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
-/* MADT */
+/*
+ * ACPI spec, Revision 5.0
+ * 5.2.12 Multiple APIC Description Table (MADT)
+ */
 static void
 build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
     VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
-    int madt_start = table_data->len;
     const MemMapEntry *memmap = vms->memmap;
     const int *irqmap = vms->irqmap;
     AcpiMadtGenericDistributor *gicd;
     AcpiMadtGenericMsiFrame *gic_msi;
     int i;
+    AcpiTable table = { .sig = "APIC", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    acpi_data_push(table_data, sizeof(AcpiMultipleApicTable));
+    acpi_table_begin(&table, table_data);
+    /* Local Interrupt Controller Address */
+    build_append_int_noprefix(table_data, 0, 4);
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
 
     gicd = acpi_data_push(table_data, sizeof *gicd);
     gicd->type = ACPI_APIC_GENERIC_DISTRIBUTOR;
@@ -650,11 +657,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         gic_msi->spi_count = cpu_to_le16(NUM_GICV2M_SPIS);
         gic_msi->spi_base = cpu_to_le16(irqmap[VIRT_GIC_V2M] + ARM_SPI_BASE);
     }
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* FADT */
hw/i386/acpi-common.c +11 -8
index 1f5947fcf9..a0cde1d874 100644
@@ -71,24 +71,29 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
     }
 }
 
+/*
+ * ACPI spec, Revision 1.0b
+ * 5.2.8 Multiple APIC Description Table
+ */
 void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
-    int madt_start = table_data->len;
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
     bool x2apic_mode = false;
 
-    AcpiMultipleApicTable *madt;
     AcpiMadtIoApic *io_apic;
     AcpiMadtIntsrcovr *intsrcovr;
     int i;
+    AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    madt = acpi_data_push(table_data, sizeof *madt);
-    madt->local_apic_address = cpu_to_le32(APIC_DEFAULT_ADDRESS);
-    madt->flags = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    /* Local APIC Address */
+    build_append_int_noprefix(table_data, APIC_DEFAULT_ADDRESS, 4);
+    build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
 
     for (i = 0; i < apic_ids->len; i++) {
         adevc->madt_cpu(adev, i, apic_ids, table_data);
@@ -156,8 +161,6 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         local_nmi->lint         = 1; /* ACPI_LINT1 */
     }
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
Signature · 1 line
2.27.0
Reviewed-by on v3 21/35
#46 lore raw

Re: [PATCH v3 21/35] acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 129 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h |  9 ---------
 hw/arm/virt-acpi-build.c    | 19 +++++++++++--------
 hw/i386/acpi-common.c       | 19 +++++++++++--------
 3 files changed, 22 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -9
index c4f0a202e8..c7fa5caa06 100644
@@ -176,15 +176,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 #define ACPI_DUAL_PIC                0
 #define ACPI_MULTIPLE_APIC           1
 
-/* Master MADT */
-
-struct AcpiMultipleApicTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t local_apic_address;     /* Physical address of local APIC */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
-
 /* Values for Type in APIC sub-headers */
 
 #define ACPI_APIC_PROCESSOR          0
hw/arm/virt-acpi-build.c +11 -8
index 6ba02cf281..e3bdcd44e8 100644
@@ -567,19 +567,26 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
-/* MADT */
+/*
+ * ACPI spec, Revision 5.0
+ * 5.2.12 Multiple APIC Description Table (MADT)
+ */
 static void
 build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
     VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
-    int madt_start = table_data->len;
     const MemMapEntry *memmap = vms->memmap;
     const int *irqmap = vms->irqmap;
     AcpiMadtGenericDistributor *gicd;
     AcpiMadtGenericMsiFrame *gic_msi;
     int i;
+    AcpiTable table = { .sig = "APIC", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    acpi_data_push(table_data, sizeof(AcpiMultipleApicTable));
+    acpi_table_begin(&table, table_data);
+    /* Local Interrupt Controller Address */
+    build_append_int_noprefix(table_data, 0, 4);
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
 
     gicd = acpi_data_push(table_data, sizeof *gicd);
     gicd->type = ACPI_APIC_GENERIC_DISTRIBUTOR;
@@ -650,11 +657,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         gic_msi->spi_count = cpu_to_le16(NUM_GICV2M_SPIS);
         gic_msi->spi_base = cpu_to_le16(irqmap[VIRT_GIC_V2M] + ARM_SPI_BASE);
     }
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* FADT */
hw/i386/acpi-common.c +10 -5
index 1f5947fcf9..a0cde1d874 100644
@@ -71,24 +71,29 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
     }
 }
 
+/*
+ * ACPI spec, Revision 1.0b
+ * 5.2.8 Multiple APIC Description Table
+ */
 void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
-    int madt_start = table_data->len;
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
     bool x2apic_mode = false;
 
-    AcpiMultipleApicTable *madt;
     AcpiMadtIoApic *io_apic;
     AcpiMadtIntsrcovr *intsrcovr;
     int i;
+    AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    madt = acpi_data_push(table_data, sizeof *madt);
-    madt->local_apic_address = cpu_to_le32(APIC_DEFAULT_ADDRESS);
-    madt->flags = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    /* Local APIC Address */
+    build_append_int_noprefix(table_data, APIC_DEFAULT_ADDRESS, 4);
+    build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
 
     for (i = 0; i < apic_ids->len; i++) {
         adevc->madt_cpu(adev, i, apic_ids, table_data);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 166

Quoted 9 lines
hw/i386/acpi-common.c +1 -3
@@ -156,8 +161,6 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         local_nmi->lint         = 1; /* ACPI_LINT1 */
     }
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 

Eric

#47 lore raw

PATCH v3 22/35 acpi: x86: remove dead code

In reply to Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 13 -------------
 1 file changed, 13 deletions(-)
include/hw/acpi/acpi-defs.h +0 -13
index c7fa5caa06..af4fa412a5 100644
@@ -163,19 +163,6 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/*
- * Differentiated System Description Table (DSDT)
- */
-
-/*
- * MADT values and structures
- */
-
-/* Values for MADT PCATCompat */
-
-#define ACPI_DUAL_PIC                0
-#define ACPI_MULTIPLE_APIC           1
-
 /* Values for Type in APIC sub-headers */
 
 #define ACPI_APIC_PROCESSOR          0
Signature · 1 line
2.27.0
Reviewed-by on v3 22/35
#48 lore raw

Re: [PATCH v3 22/35] acpi: x86: remove dead code

Quoted 20 lines · Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 13 -------------
 1 file changed, 13 deletions(-)
include/hw/acpi/acpi-defs.h +0 -6
index c7fa5caa06..af4fa412a5 100644
@@ -163,19 +163,6 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/*
- * Differentiated System Description Table (DSDT)
- */
-
-/*
- * MADT values and structures

include/hw/acpi/acpi-defs.h struct AcpiFacsDescriptorRev1 { · line 168

Quoted 10 lines
include/hw/acpi/acpi-defs.h +0 -7
- */
-
-/* Values for MADT PCATCompat */
-
-#define ACPI_DUAL_PIC                0
-#define ACPI_MULTIPLE_APIC           1
-
 /* Values for Type in APIC sub-headers */
 
 #define ACPI_APIC_PROCESSOR          0

Eric

#49 lore raw

PATCH v3 23/35 acpi: x86: set enabled when composing _MAT entries

In reply to Igor Mammedov

Instead of composing disabled _MAT entry and then later on patching it to enabled for hotpluggbale CPUs in DSDT, set it to enabled at the time _MAT entry is built.

It will allow to drop usage of packed structures in following patches when build_madt() is switched to use build_append_int_noprefix() API.

---
CC: [email protected]

---
 include/hw/acpi/acpi_dev_interface.h |  3 ++-
 include/hw/i386/pc.h                 |  6 +++---
 hw/acpi/acpi-x86-stub.c              |  3 ++-
 hw/acpi/cpu.c                        | 17 ++---------------
 hw/i386/acpi-common.c                | 18 ++++++------------
 5 files changed, 15 insertions(+), 32 deletions(-)
include/hw/acpi/acpi_dev_interface.h +2 -1
index 769ff55c7e..ea6056ab92 100644
@@ -53,6 +53,7 @@ struct AcpiDeviceIfClass {
     void (*ospm_status)(AcpiDeviceIf *adev, ACPIOSTInfoList ***list);
     void (*send_event)(AcpiDeviceIf *adev, AcpiEventStatusBits ev);
     void (*madt_cpu)(AcpiDeviceIf *adev, int uid,
-                     const CPUArchIdList *apic_ids, GArray *entry);
+                     const CPUArchIdList *apic_ids, GArray *entry,
+                     bool force_enabled);
 };
 #endif
include/hw/i386/pc.h +3 -3
index 4d2e35a152..82cf7b7e30 100644
@@ -187,10 +187,10 @@ bool pc_system_ovmf_table_find(const char *entry, uint8_t **data,
                                int *data_len);
 void pc_system_parse_ovmf_flash(uint8_t *flash_ptr, size_t flash_size);
 
-
-/* acpi-build.c */
+/* hw/i386/acpi-common.c */
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry);
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled);
 
 extern GlobalProperty pc_compat_6_1[];
 extern const size_t pc_compat_6_1_len;
hw/acpi/acpi-x86-stub.c +2 -1
index e9e46c5c5f..3df1e090f4 100644
@@ -3,7 +3,8 @@
 #include "hw/i386/acpi-build.h"
 
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry)
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled)
 {
 }
 
hw/acpi/cpu.c +2 -15
index f82e9512fd..b20903ea30 100644
@@ -669,21 +669,8 @@ void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
 
             /* build _MAT object */
             assert(adevc && adevc->madt_cpu);
-            adevc->madt_cpu(adev, i, arch_ids, madt_buf);
-            switch (madt_buf->data[0]) {
-            case ACPI_APIC_PROCESSOR: {
-                AcpiMadtProcessorApic *apic = (void *)madt_buf->data;
-                apic->flags = cpu_to_le32(1);
-                break;
-            }
-            case ACPI_APIC_LOCAL_X2APIC: {
-                AcpiMadtProcessorX2Apic *apic = (void *)madt_buf->data;
-                apic->flags = cpu_to_le32(1);
-                break;
-            }
-            default:
-                assert(0);
-            }
+            adevc->madt_cpu(adev, i, arch_ids, madt_buf,
+                            true); /* set enabled flag */
             aml_append(dev, aml_name_decl("_MAT",
                 aml_buffer(madt_buf->len, (uint8_t *)madt_buf->data)));
             g_array_free(madt_buf, true);
hw/i386/acpi-common.c +6 -12
index a0cde1d874..7983a13a93 100644
@@ -34,9 +34,11 @@
 #include "acpi-common.h"
 
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry)
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -51,11 +53,7 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
         apic->length = sizeof(*apic);
         apic->processor_id = uid;
         apic->local_apic_id = apic_id;
-        if (apic_ids->cpus[uid].cpu != NULL) {
-            apic->flags = cpu_to_le32(1);
-        } else {
-            apic->flags = cpu_to_le32(0);
-        }
+        apic->flags = cpu_to_le32(flags);
     } else {
         AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
 
@@ -63,11 +61,7 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
         apic->length = sizeof(*apic);
         apic->uid = cpu_to_le32(uid);
         apic->x2apic_id = cpu_to_le32(apic_id);
-        if (apic_ids->cpus[uid].cpu != NULL) {
-            apic->flags = cpu_to_le32(1);
-        } else {
-            apic->flags = cpu_to_le32(0);
-        }
+        apic->flags = cpu_to_le32(flags);
     }
 }
 
@@ -96,7 +90,7 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
     build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
 
     for (i = 0; i < apic_ids->len; i++) {
-        adevc->madt_cpu(adev, i, apic_ids, table_data);
+        adevc->madt_cpu(adev, i, apic_ids, table_data, false);
         if (apic_ids->cpus[i].arch_id > 254) {
             x2apic_mode = true;
         }
Signature · 1 line
2.27.0
Reviewed-by on v3 23/35
#50 lore raw

Re: [PATCH v3 23/35] acpi: x86: set enabled when composing _MAT entries

Quoted 137 lines · Igor Mammedov

Instead of composing disabled _MAT entry and then later on patching it to enabled for hotpluggbale CPUs in DSDT, set it to enabled at the time _MAT entry is built.

It will allow to drop usage of packed structures in following patches when build_madt() is switched to use build_append_int_noprefix() API.

---
CC: [email protected]

---
 include/hw/acpi/acpi_dev_interface.h |  3 ++-
 include/hw/i386/pc.h                 |  6 +++---
 hw/acpi/acpi-x86-stub.c              |  3 ++-
 hw/acpi/cpu.c                        | 17 ++---------------
 hw/i386/acpi-common.c                | 18 ++++++------------
 5 files changed, 15 insertions(+), 32 deletions(-)
include/hw/acpi/acpi_dev_interface.h +2 -1
index 769ff55c7e..ea6056ab92 100644
@@ -53,6 +53,7 @@ struct AcpiDeviceIfClass {
     void (*ospm_status)(AcpiDeviceIf *adev, ACPIOSTInfoList ***list);
     void (*send_event)(AcpiDeviceIf *adev, AcpiEventStatusBits ev);
     void (*madt_cpu)(AcpiDeviceIf *adev, int uid,
-                     const CPUArchIdList *apic_ids, GArray *entry);
+                     const CPUArchIdList *apic_ids, GArray *entry,
+                     bool force_enabled);
 };
 #endif
include/hw/i386/pc.h +3 -3
index 4d2e35a152..82cf7b7e30 100644
@@ -187,10 +187,10 @@ bool pc_system_ovmf_table_find(const char *entry, uint8_t **data,
                                int *data_len);
 void pc_system_parse_ovmf_flash(uint8_t *flash_ptr, size_t flash_size);
 
-
-/* acpi-build.c */
+/* hw/i386/acpi-common.c */
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry);
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled);
 
 extern GlobalProperty pc_compat_6_1[];
 extern const size_t pc_compat_6_1_len;
hw/acpi/acpi-x86-stub.c +2 -1
index e9e46c5c5f..3df1e090f4 100644
@@ -3,7 +3,8 @@
 #include "hw/i386/acpi-build.h"
 
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry)
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled)
 {
 }
 
hw/acpi/cpu.c +2 -15
index f82e9512fd..b20903ea30 100644
@@ -669,21 +669,8 @@ void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
 
             /* build _MAT object */
             assert(adevc && adevc->madt_cpu);
-            adevc->madt_cpu(adev, i, arch_ids, madt_buf);
-            switch (madt_buf->data[0]) {
-            case ACPI_APIC_PROCESSOR: {
-                AcpiMadtProcessorApic *apic = (void *)madt_buf->data;
-                apic->flags = cpu_to_le32(1);
-                break;
-            }
-            case ACPI_APIC_LOCAL_X2APIC: {
-                AcpiMadtProcessorX2Apic *apic = (void *)madt_buf->data;
-                apic->flags = cpu_to_le32(1);
-                break;
-            }
-            default:
-                assert(0);
-            }
+            adevc->madt_cpu(adev, i, arch_ids, madt_buf,
+                            true); /* set enabled flag */
             aml_append(dev, aml_name_decl("_MAT",
                 aml_buffer(madt_buf->len, (uint8_t *)madt_buf->data)));
             g_array_free(madt_buf, true);
hw/i386/acpi-common.c +5 -11
index a0cde1d874..7983a13a93 100644
@@ -34,9 +34,11 @@
 #include "acpi-common.h"
 
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry)
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -51,11 +53,7 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
         apic->length = sizeof(*apic);
         apic->processor_id = uid;
         apic->local_apic_id = apic_id;
-        if (apic_ids->cpus[uid].cpu != NULL) {
-            apic->flags = cpu_to_le32(1);
-        } else {
-            apic->flags = cpu_to_le32(0);
-        }
+        apic->flags = cpu_to_le32(flags);
     } else {
         AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
 
@@ -63,11 +61,7 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
         apic->length = sizeof(*apic);
         apic->uid = cpu_to_le32(uid);
         apic->x2apic_id = cpu_to_le32(apic_id);
-        if (apic_ids->cpus[uid].cpu != NULL) {
-            apic->flags = cpu_to_le32(1);
-        } else {
-            apic->flags = cpu_to_le32(0);
-        }
+        apic->flags = cpu_to_le32(flags);
     }
 }
 

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 96

Quoted 8 lines
hw/i386/acpi-common.c +1 -1
@@ -96,7 +90,7 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
     build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
 
     for (i = 0; i < apic_ids->len; i++) {
-        adevc->madt_cpu(adev, i, apic_ids, table_data);
+        adevc->madt_cpu(adev, i, apic_ids, table_data, false);
         if (apic_ids->cpus[i].arch_id > 254) {
             x2apic_mode = true;
         }

Eric

#51 lore raw

PATCH v3 24/35 acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h |  64 ------------------
 hw/i386/acpi-common.c       | 127 ++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 126 deletions(-)
include/hw/acpi/acpi-defs.h +0 -64
index af4fa412a5..3f174ba208 100644
@@ -165,17 +165,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Values for Type in APIC sub-headers */
 
-#define ACPI_APIC_PROCESSOR          0
-#define ACPI_APIC_IO                 1
-#define ACPI_APIC_XRUPT_OVERRIDE     2
-#define ACPI_APIC_NMI                3
-#define ACPI_APIC_LOCAL_NMI          4
-#define ACPI_APIC_ADDRESS_OVERRIDE   5
-#define ACPI_APIC_IO_SAPIC           6
-#define ACPI_APIC_LOCAL_SAPIC        7
-#define ACPI_APIC_XRUPT_SOURCE       8
-#define ACPI_APIC_LOCAL_X2APIC       9
-#define ACPI_APIC_LOCAL_X2APIC_NMI      10
 #define ACPI_APIC_GENERIC_CPU_INTERFACE 11
 #define ACPI_APIC_GENERIC_DISTRIBUTOR   12
 #define ACPI_APIC_GENERIC_MSI_FRAME     13
@@ -192,59 +181,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Sub-structures for MADT */
 
-struct AcpiMadtProcessorApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint8_t  local_apic_id;          /* Processor's local APIC id */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorApic AcpiMadtProcessorApic;
-
-struct AcpiMadtIoApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  io_apic_id;             /* I/O APIC ID */
-    uint8_t  reserved;               /* Reserved - must be zero */
-    uint32_t address;                /* APIC physical address */
-    uint32_t interrupt;              /* Global system interrupt where INTI
-                                 * lines start */
-} QEMU_PACKED;
-typedef struct AcpiMadtIoApic AcpiMadtIoApic;
-
-struct AcpiMadtIntsrcovr {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  bus;
-    uint8_t  source;
-    uint32_t gsi;
-    uint16_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtIntsrcovr AcpiMadtIntsrcovr;
-
-struct AcpiMadtLocalNmi {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint16_t flags;                  /* MPS INTI flags */
-    uint8_t  lint;                   /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalNmi AcpiMadtLocalNmi;
-
-struct AcpiMadtProcessorX2Apic {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t x2apic_id;              /* Processor's local x2APIC ID */
-    uint32_t flags;
-    uint32_t uid;                    /* Processor object _UID */
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorX2Apic AcpiMadtProcessorX2Apic;
-
-struct AcpiMadtLocalX2ApicNmi {
-    ACPI_SUB_HEADER_DEF
-    uint16_t flags;                  /* MPS INTI flags */
-    uint32_t uid;                    /* Processor object _UID */
-    uint8_t  lint;                   /* Local APIC LINT# */
-    uint8_t  reserved[3];            /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalX2ApicNmi AcpiMadtLocalX2ApicNmi;
-
 struct AcpiMadtGenericCpuInterface {
     ACPI_SUB_HEADER_DEF
     uint16_t reserved;
hw/i386/acpi-common.c +65 -62

172 lines not on this page · raw message

Signature · 1 line
2.27.0
Reviewed-by on v3 24/35
#52 lore raw

Re: [PATCH v3 24/35] acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table

Quoted 100 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h |  64 ------------------
 hw/i386/acpi-common.c       | 127 ++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 126 deletions(-)
include/hw/acpi/acpi-defs.h +0 -64
index af4fa412a5..3f174ba208 100644
@@ -165,17 +165,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Values for Type in APIC sub-headers */
 
-#define ACPI_APIC_PROCESSOR          0
-#define ACPI_APIC_IO                 1
-#define ACPI_APIC_XRUPT_OVERRIDE     2
-#define ACPI_APIC_NMI                3
-#define ACPI_APIC_LOCAL_NMI          4
-#define ACPI_APIC_ADDRESS_OVERRIDE   5
-#define ACPI_APIC_IO_SAPIC           6
-#define ACPI_APIC_LOCAL_SAPIC        7
-#define ACPI_APIC_XRUPT_SOURCE       8
-#define ACPI_APIC_LOCAL_X2APIC       9
-#define ACPI_APIC_LOCAL_X2APIC_NMI      10
 #define ACPI_APIC_GENERIC_CPU_INTERFACE 11
 #define ACPI_APIC_GENERIC_DISTRIBUTOR   12
 #define ACPI_APIC_GENERIC_MSI_FRAME     13
@@ -192,59 +181,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Sub-structures for MADT */
 
-struct AcpiMadtProcessorApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint8_t  local_apic_id;          /* Processor's local APIC id */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorApic AcpiMadtProcessorApic;
-
-struct AcpiMadtIoApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  io_apic_id;             /* I/O APIC ID */
-    uint8_t  reserved;               /* Reserved - must be zero */
-    uint32_t address;                /* APIC physical address */
-    uint32_t interrupt;              /* Global system interrupt where INTI
-                                 * lines start */
-} QEMU_PACKED;
-typedef struct AcpiMadtIoApic AcpiMadtIoApic;
-
-struct AcpiMadtIntsrcovr {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  bus;
-    uint8_t  source;
-    uint32_t gsi;
-    uint16_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtIntsrcovr AcpiMadtIntsrcovr;
-
-struct AcpiMadtLocalNmi {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint16_t flags;                  /* MPS INTI flags */
-    uint8_t  lint;                   /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalNmi AcpiMadtLocalNmi;
-
-struct AcpiMadtProcessorX2Apic {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t x2apic_id;              /* Processor's local x2APIC ID */
-    uint32_t flags;
-    uint32_t uid;                    /* Processor object _UID */
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorX2Apic AcpiMadtProcessorX2Apic;
-
-struct AcpiMadtLocalX2ApicNmi {
-    ACPI_SUB_HEADER_DEF
-    uint16_t flags;                  /* MPS INTI flags */
-    uint32_t uid;                    /* Processor object _UID */
-    uint8_t  lint;                   /* Local APIC LINT# */
-    uint8_t  reserved[3];            /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalX2ApicNmi AcpiMadtLocalX2ApicNmi;
-
 struct AcpiMadtGenericCpuInterface {
     ACPI_SUB_HEADER_DEF
     uint16_t reserved;
hw/i386/acpi-common.c +0 -0
index 7983a13a93..aa7b5c357e 100644

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 41

Quoted 5 lines
hw/i386/acpi-common.c +1 -1
@@ -38,7 +38,9 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
                        bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
-    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
+    /* Flags – Local APIC Flags */

nit: move that comment at the place of the build_append_int_noprefix

Quoted 10 lines
hw/i386/acpi-common.c +2 -1
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ?
+                     1 /* Enabled */ : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -47,24 +49,47 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
      * should be put in MADT but kept disabled.
      */
     if (apic_id < 255) {
-        AcpiMadtProcessorApic *apic = acpi_data_push(entry, sizeof *apic);

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 55

Quoted 10 lines
hw/i386/acpi-common.c +4 -6
-
-        apic->type = ACPI_APIC_PROCESSOR;
-        apic->length = sizeof(*apic);
-        apic->processor_id = uid;
-        apic->local_apic_id = apic_id;
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 1.0b, Table 5-13 Processor Local APIC Structure */
+        build_append_int_noprefix(entry, 0, 1);       /* Type */
+        build_append_int_noprefix(entry, 8, 1);       /* Length */
+        build_append_int_noprefix(entry, uid, 1);     /* ACPI Processor ID */

nit s/ID/UID

Quoted 86 lines
hw/i386/acpi-common.c +38 -26
+        build_append_int_noprefix(entry, apic_id, 1); /* APIC ID */
+        build_append_int_noprefix(entry, flags, 4); /* Flags */
     } else {
-        AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_LOCAL_X2APIC;
-        apic->length = sizeof(*apic);
-        apic->uid = cpu_to_le32(uid);
-        apic->x2apic_id = cpu_to_le32(apic_id);
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 4.0, 5.2.12.12 Processor Local x2APIC Structure */
+        build_append_int_noprefix(entry, 9, 1);       /* Type */
+        build_append_int_noprefix(entry, 16, 1);      /* Length */
+        build_append_int_noprefix(entry, 0, 2);       /* Reserved */
+        build_append_int_noprefix(entry, apic_id, 4); /* X2APIC ID */
+        build_append_int_noprefix(entry, flags, 4);   /* Flags */
+        build_append_int_noprefix(entry, uid, 4);     /* ACPI Processor UID */
     }
 }
 
+static void build_ioapic(GArray *entry, uint8_t id, uint32_t addr, uint32_t irq)
+{
+    /* Rev 1.0b, 5.2.8.2 IO APIC */
+    build_append_int_noprefix(entry, 1, 1);    /* Type */
+    build_append_int_noprefix(entry, 12, 1);   /* Length */
+    build_append_int_noprefix(entry, id, 1);   /* IO APIC ID */
+    build_append_int_noprefix(entry, 0, 1);    /* Reserved */
+    build_append_int_noprefix(entry, addr, 4); /* IO APIC Address */
+    build_append_int_noprefix(entry, irq, 4);  /* System Vector Base */
+}
+
+static void
+build_xrupt_override(GArray *entry, uint8_t src, uint32_t gsi, uint16_t flags)
+{
+    /* Rev 1.0b, 5.2.8.3.1 Interrupt Source Overrides */
+    build_append_int_noprefix(entry, 2, 1);  /* Type */
+    build_append_int_noprefix(entry, 10, 1); /* Length */
+    build_append_int_noprefix(entry, 0, 1);  /* Bus */
+    build_append_int_noprefix(entry, src, 1);  /* Source */
+    /* Global System Interrupt Vector */
+    build_append_int_noprefix(entry, gsi, 4);
+    build_append_int_noprefix(entry, flags, 2);  /* Flags */
+}
+
 /*
  * ACPI spec, Revision 1.0b
  * 5.2.8 Multiple APIC Description Table
@@ -73,14 +98,11 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
+    int i;
+    bool x2apic_mode = false;
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
-    bool x2apic_mode = false;
-
-    AcpiMadtIoApic *io_apic;
-    AcpiMadtIntsrcovr *intsrcovr;
-    int i;
     AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
                         .oem_table_id = oem_table_id };
 
@@ -96,30 +118,14 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         }
     }
 
-    io_apic = acpi_data_push(table_data, sizeof *io_apic);
-    io_apic->type = ACPI_APIC_IO;
-    io_apic->length = sizeof(*io_apic);
-    io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID;
-    io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS);
-    io_apic->interrupt = cpu_to_le32(0);
-
+    build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID, IO_APIC_DEFAULT_ADDRESS, 0);
     if (x86ms->ioapic2) {
-        AcpiMadtIoApic *io_apic2;
-        io_apic2 = acpi_data_push(table_data, sizeof *io_apic);
-        io_apic2->type = ACPI_APIC_IO;
-        io_apic2->length = sizeof(*io_apic);
-        io_apic2->io_apic_id = ACPI_BUILD_IOAPIC_ID + 1;
-        io_apic2->address = cpu_to_le32(IO_APIC_SECONDARY_ADDRESS);
-        io_apic2->interrupt = cpu_to_le32(IO_APIC_SECONDARY_IRQBASE);
+        build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID + 1,
+                     IO_APIC_SECONDARY_ADDRESS, IO_APIC_SECONDARY_IRQBASE);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 128

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
     }
 
     if (x86ms->apic_xrupt_override) {
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = 0;
-        intsrcovr->gsi    = cpu_to_le32(2);
-        intsrcovr->flags  = cpu_to_le16(0); /* conforms to bus specifications */
+        build_xrupt_override(table_data, 0, 2, 0);

lost /* conforms to bus specifications */ comment for the flag during the battle/ Don't know if it is useful though

Quoted 4 lines
hw/i386/acpi-common.c +0 -0
     }
 
     for (i = 1; i < 16; i++) {

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 136

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
@@ -127,32 +133,29 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
             /* No need for a INT source override structure. */
             continue;
         }
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = i;
-        intsrcovr->gsi    = cpu_to_le32(i);
-        intsrcovr->flags  = cpu_to_le16(0xd); /* active high, level triggered */
+        build_xrupt_override(table_data, i, i, 0xd);

Lost for the flag /* active high, level triggered */

Quoted 9 lines
hw/i386/acpi-common.c +0 -6
     }
 
     if (x2apic_mode) {
-        AcpiMadtLocalX2ApicNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);
-        local_nmi->type   = ACPI_APIC_LOCAL_X2APIC_NMI;
-        local_nmi->length = sizeof(*local_nmi);
-        local_nmi->uid    = 0xFFFFFFFF; /* all processors */

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 147

Quoted 10 lines
hw/i386/acpi-common.c +8 -2
-        local_nmi->flags  = cpu_to_le16(0);
-        local_nmi->lint   = 1; /* ACPI_LINT1 */
+        /* Rev 4.0, 5.2.12.13 Local x2APIC NMI Structure*/
+        build_append_int_noprefix(table_data, 0xA, 1); /* Type */
+        build_append_int_noprefix(table_data, 12, 1);  /* Length */
+        build_append_int_noprefix(table_data, 0, 2);   /* Flags */
+        /* ACPI Processor UID */
+        build_append_int_noprefix(table_data, 0xFFFFFFFF /* all processors */,
+                                  4);
+        /* Local x2APIC INTI# */

Local x2APIC LINT#

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 149

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
+        build_append_int_noprefix(table_data, 0, 3);

/* reserved */

Quoted 4 lines
hw/i386/acpi-common.c +0 -3
     } else {
-        AcpiMadtLocalNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 155

Quoted 10 lines
hw/i386/acpi-common.c +5 -5
-        local_nmi->type         = ACPI_APIC_LOCAL_NMI;
-        local_nmi->length       = sizeof(*local_nmi);
-        local_nmi->processor_id = 0xff; /* all processors */
-        local_nmi->flags        = cpu_to_le16(0);
-        local_nmi->lint         = 1; /* ACPI_LINT1 */
+        /* Rev 1.0b, 5.2.8.3.3 Local APIC NMI */
+        build_append_int_noprefix(table_data, 4, 1);  /* Type */
+        build_append_int_noprefix(table_data, 6, 1);  /* Length */
+        /* ACPI Processor ID */
+        build_append_int_noprefix(table_data, 0xff /* all processors */, 1);

0xFF

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 157

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 0, 2);  /* Flags */
+        /* Local APIC INTI# */

Local APIC LINT#

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 161

Quoted 5 lines
hw/i386/acpi-common.c +1 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
     }
 
     acpi_table_end(linker, &table);

Besides

Eric

#53 lore raw

Re: [PATCH v3 24/35] acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table

Quoted 99 lines · On Wed, 22 Sep 2021 12:20:54 +0200 Eric Auger <[email protected]> wrote:
Quoted 98 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h |  64 ------------------
 hw/i386/acpi-common.c       | 127 ++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 126 deletions(-)
include/hw/acpi/acpi-defs.h +0 -64
index af4fa412a5..3f174ba208 100644
@@ -165,17 +165,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Values for Type in APIC sub-headers */
 
-#define ACPI_APIC_PROCESSOR          0
-#define ACPI_APIC_IO                 1
-#define ACPI_APIC_XRUPT_OVERRIDE     2
-#define ACPI_APIC_NMI                3
-#define ACPI_APIC_LOCAL_NMI          4
-#define ACPI_APIC_ADDRESS_OVERRIDE   5
-#define ACPI_APIC_IO_SAPIC           6
-#define ACPI_APIC_LOCAL_SAPIC        7
-#define ACPI_APIC_XRUPT_SOURCE       8
-#define ACPI_APIC_LOCAL_X2APIC       9
-#define ACPI_APIC_LOCAL_X2APIC_NMI      10
 #define ACPI_APIC_GENERIC_CPU_INTERFACE 11
 #define ACPI_APIC_GENERIC_DISTRIBUTOR   12
 #define ACPI_APIC_GENERIC_MSI_FRAME     13
@@ -192,59 +181,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Sub-structures for MADT */
 
-struct AcpiMadtProcessorApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint8_t  local_apic_id;          /* Processor's local APIC id */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorApic AcpiMadtProcessorApic;
-
-struct AcpiMadtIoApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  io_apic_id;             /* I/O APIC ID */
-    uint8_t  reserved;               /* Reserved - must be zero */
-    uint32_t address;                /* APIC physical address */
-    uint32_t interrupt;              /* Global system interrupt where INTI
-                                 * lines start */
-} QEMU_PACKED;
-typedef struct AcpiMadtIoApic AcpiMadtIoApic;
-
-struct AcpiMadtIntsrcovr {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  bus;
-    uint8_t  source;
-    uint32_t gsi;
-    uint16_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtIntsrcovr AcpiMadtIntsrcovr;
-
-struct AcpiMadtLocalNmi {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint16_t flags;                  /* MPS INTI flags */
-    uint8_t  lint;                   /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalNmi AcpiMadtLocalNmi;
-
-struct AcpiMadtProcessorX2Apic {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t x2apic_id;              /* Processor's local x2APIC ID */
-    uint32_t flags;
-    uint32_t uid;                    /* Processor object _UID */
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorX2Apic AcpiMadtProcessorX2Apic;
-
-struct AcpiMadtLocalX2ApicNmi {
-    ACPI_SUB_HEADER_DEF
-    uint16_t flags;                  /* MPS INTI flags */
-    uint32_t uid;                    /* Processor object _UID */
-    uint8_t  lint;                   /* Local APIC LINT# */
-    uint8_t  reserved[3];            /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalX2ApicNmi AcpiMadtLocalX2ApicNmi;
-
 struct AcpiMadtGenericCpuInterface {
     ACPI_SUB_HEADER_DEF
     uint16_t reserved;
hw/i386/acpi-common.c +0 -1
index 7983a13a93..aa7b5c357e 100644
--- a/hw/i386/acpi-common.c
Quoted 8 lines

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 41

Quoted 7 lines

+++ b/hw/i386/acpi-common.c

hw/i386/acpi-common.c +1 -1
@@ -38,7 +38,9 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
                        bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
-    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
+    /* Flags – Local APIC Flags */  

nit: move that comment at the place of the build_append_int_noprefix

that place(s) already has comment in expected format, here is just reminder about what is initialized here.

Quoted 13 lines
Quoted 13 lines
hw/i386/acpi-common.c +2 -4
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ?
+                     1 /* Enabled */ : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -47,24 +49,47 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
      * should be put in MADT but kept disabled.
      */
     if (apic_id < 255) {
-        AcpiMadtProcessorApic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_PROCESSOR;
-        apic->length = sizeof(*apic);
Quoted 8 lines

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 55

Quoted 7 lines
hw/i386/acpi-common.c +4 -3
-        apic->processor_id = uid;
-        apic->local_apic_id = apic_id;
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 1.0b, Table 5-13 Processor Local APIC Structure */
+        build_append_int_noprefix(entry, 0, 1);       /* Type */
+        build_append_int_noprefix(entry, 8, 1);       /* Length */
+        build_append_int_noprefix(entry, uid, 1);     /* ACPI Processor ID */  

nit s/ID/UID

it's ID in 1.0b

Quoted 153 lines
Quoted 86 lines
hw/i386/acpi-common.c +38 -26
+        build_append_int_noprefix(entry, apic_id, 1); /* APIC ID */
+        build_append_int_noprefix(entry, flags, 4); /* Flags */
     } else {
-        AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_LOCAL_X2APIC;
-        apic->length = sizeof(*apic);
-        apic->uid = cpu_to_le32(uid);
-        apic->x2apic_id = cpu_to_le32(apic_id);
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 4.0, 5.2.12.12 Processor Local x2APIC Structure */
+        build_append_int_noprefix(entry, 9, 1);       /* Type */
+        build_append_int_noprefix(entry, 16, 1);      /* Length */
+        build_append_int_noprefix(entry, 0, 2);       /* Reserved */
+        build_append_int_noprefix(entry, apic_id, 4); /* X2APIC ID */
+        build_append_int_noprefix(entry, flags, 4);   /* Flags */
+        build_append_int_noprefix(entry, uid, 4);     /* ACPI Processor UID */
     }
 }
 
+static void build_ioapic(GArray *entry, uint8_t id, uint32_t addr, uint32_t irq)
+{
+    /* Rev 1.0b, 5.2.8.2 IO APIC */
+    build_append_int_noprefix(entry, 1, 1);    /* Type */
+    build_append_int_noprefix(entry, 12, 1);   /* Length */
+    build_append_int_noprefix(entry, id, 1);   /* IO APIC ID */
+    build_append_int_noprefix(entry, 0, 1);    /* Reserved */
+    build_append_int_noprefix(entry, addr, 4); /* IO APIC Address */
+    build_append_int_noprefix(entry, irq, 4);  /* System Vector Base */
+}
+
+static void
+build_xrupt_override(GArray *entry, uint8_t src, uint32_t gsi, uint16_t flags)
+{
+    /* Rev 1.0b, 5.2.8.3.1 Interrupt Source Overrides */
+    build_append_int_noprefix(entry, 2, 1);  /* Type */
+    build_append_int_noprefix(entry, 10, 1); /* Length */
+    build_append_int_noprefix(entry, 0, 1);  /* Bus */
+    build_append_int_noprefix(entry, src, 1);  /* Source */
+    /* Global System Interrupt Vector */
+    build_append_int_noprefix(entry, gsi, 4);
+    build_append_int_noprefix(entry, flags, 2);  /* Flags */
+}
+
 /*
  * ACPI spec, Revision 1.0b
  * 5.2.8 Multiple APIC Description Table
@@ -73,14 +98,11 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
+    int i;
+    bool x2apic_mode = false;
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
-    bool x2apic_mode = false;
-
-    AcpiMadtIoApic *io_apic;
-    AcpiMadtIntsrcovr *intsrcovr;
-    int i;
     AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
                         .oem_table_id = oem_table_id };
 
@@ -96,30 +118,14 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         }
     }
 
-    io_apic = acpi_data_push(table_data, sizeof *io_apic);
-    io_apic->type = ACPI_APIC_IO;
-    io_apic->length = sizeof(*io_apic);
-    io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID;
-    io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS);
-    io_apic->interrupt = cpu_to_le32(0);
-
+    build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID, IO_APIC_DEFAULT_ADDRESS, 0);
     if (x86ms->ioapic2) {
-        AcpiMadtIoApic *io_apic2;
-        io_apic2 = acpi_data_push(table_data, sizeof *io_apic);
-        io_apic2->type = ACPI_APIC_IO;
-        io_apic2->length = sizeof(*io_apic);
-        io_apic2->io_apic_id = ACPI_BUILD_IOAPIC_ID + 1;
-        io_apic2->address = cpu_to_le32(IO_APIC_SECONDARY_ADDRESS);
-        io_apic2->interrupt = cpu_to_le32(IO_APIC_SECONDARY_IRQBASE);
+        build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID + 1,
+                     IO_APIC_SECONDARY_ADDRESS, IO_APIC_SECONDARY_IRQBASE);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 128

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
     }
 
     if (x86ms->apic_xrupt_override) {
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = 0;
-        intsrcovr->gsi    = cpu_to_le32(2);
-        intsrcovr->flags  = cpu_to_le16(0); /* conforms to bus specifications */
+        build_xrupt_override(table_data, 0, 2, 0);  

lost /* conforms to bus specifications */ comment for the flag during the battle/ Don't know if it is useful though

Quoted 4 lines
hw/i386/acpi-common.c +0 -0
     }
 
     for (i = 1; i < 16; i++) {

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 136

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
@@ -127,32 +133,29 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
             /* No need for a INT source override structure. */
             continue;
         }
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = i;
-        intsrcovr->gsi    = cpu_to_le32(i);
-        intsrcovr->flags  = cpu_to_le16(0xd); /* active high, level triggered */
+        build_xrupt_override(table_data, i, i, 0xd);  

Lost for the flag /* active high, level triggered */

Quoted 9 lines
hw/i386/acpi-common.c +0 -6
     }
 
     if (x2apic_mode) {
-        AcpiMadtLocalX2ApicNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);
-        local_nmi->type   = ACPI_APIC_LOCAL_X2APIC_NMI;
-        local_nmi->length = sizeof(*local_nmi);
-        local_nmi->uid    = 0xFFFFFFFF; /* all processors */

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 147

Quoted 10 lines
hw/i386/acpi-common.c +8 -2
-        local_nmi->flags  = cpu_to_le16(0);
-        local_nmi->lint   = 1; /* ACPI_LINT1 */
+        /* Rev 4.0, 5.2.12.13 Local x2APIC NMI Structure*/
+        build_append_int_noprefix(table_data, 0xA, 1); /* Type */
+        build_append_int_noprefix(table_data, 12, 1);  /* Length */
+        build_append_int_noprefix(table_data, 0, 2);   /* Flags */
+        /* ACPI Processor UID */
+        build_append_int_noprefix(table_data, 0xFFFFFFFF /* all processors */,
+                                  4);
+        /* Local x2APIC INTI# */  

Local x2APIC LINT#

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 149

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
+        build_append_int_noprefix(table_data, 0, 3);  

/* reserved */

Quoted 4 lines
hw/i386/acpi-common.c +0 -3
     } else {
-        AcpiMadtLocalNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 155

Quoted 10 lines
hw/i386/acpi-common.c +5 -5
-        local_nmi->type         = ACPI_APIC_LOCAL_NMI;
-        local_nmi->length       = sizeof(*local_nmi);
-        local_nmi->processor_id = 0xff; /* all processors */
-        local_nmi->flags        = cpu_to_le16(0);
-        local_nmi->lint         = 1; /* ACPI_LINT1 */
+        /* Rev 1.0b, 5.2.8.3.3 Local APIC NMI */
+        build_append_int_noprefix(table_data, 4, 1);  /* Type */
+        build_append_int_noprefix(table_data, 6, 1);  /* Length */
+        /* ACPI Processor ID */
+        build_append_int_noprefix(table_data, 0xff /* all processors */, 1);  
Quoted 5 lines

0xFF

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 157

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 0, 2);  /* Flags */
+        /* Local APIC INTI# */  

Local APIC LINT#

it's "Local APIC INTI#" in 1.0b

Quoted 5 lines

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 161

Quoted 5 lines
hw/i386/acpi-common.c +1 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
     }
 
     acpi_table_end(linker, &table);

the rest is fixed up

Quoted 5 lines

Besides

Eric

#54 lore raw

Re: [PATCH v3 24/35] acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table

Hi,

Quoted 291 lines · Igor Mammedov
Quoted 99 lines · On Wed, 22 Sep 2021 12:20:54 +0200 Eric Auger <[email protected]> wrote:
Quoted 98 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h |  64 ------------------
 hw/i386/acpi-common.c       | 127 ++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 126 deletions(-)
include/hw/acpi/acpi-defs.h +0 -64
index af4fa412a5..3f174ba208 100644
@@ -165,17 +165,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Values for Type in APIC sub-headers */
 
-#define ACPI_APIC_PROCESSOR          0
-#define ACPI_APIC_IO                 1
-#define ACPI_APIC_XRUPT_OVERRIDE     2
-#define ACPI_APIC_NMI                3
-#define ACPI_APIC_LOCAL_NMI          4
-#define ACPI_APIC_ADDRESS_OVERRIDE   5
-#define ACPI_APIC_IO_SAPIC           6
-#define ACPI_APIC_LOCAL_SAPIC        7
-#define ACPI_APIC_XRUPT_SOURCE       8
-#define ACPI_APIC_LOCAL_X2APIC       9
-#define ACPI_APIC_LOCAL_X2APIC_NMI      10
 #define ACPI_APIC_GENERIC_CPU_INTERFACE 11
 #define ACPI_APIC_GENERIC_DISTRIBUTOR   12
 #define ACPI_APIC_GENERIC_MSI_FRAME     13
@@ -192,59 +181,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Sub-structures for MADT */
 
-struct AcpiMadtProcessorApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint8_t  local_apic_id;          /* Processor's local APIC id */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorApic AcpiMadtProcessorApic;
-
-struct AcpiMadtIoApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  io_apic_id;             /* I/O APIC ID */
-    uint8_t  reserved;               /* Reserved - must be zero */
-    uint32_t address;                /* APIC physical address */
-    uint32_t interrupt;              /* Global system interrupt where INTI
-                                 * lines start */
-} QEMU_PACKED;
-typedef struct AcpiMadtIoApic AcpiMadtIoApic;
-
-struct AcpiMadtIntsrcovr {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  bus;
-    uint8_t  source;
-    uint32_t gsi;
-    uint16_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtIntsrcovr AcpiMadtIntsrcovr;
-
-struct AcpiMadtLocalNmi {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint16_t flags;                  /* MPS INTI flags */
-    uint8_t  lint;                   /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalNmi AcpiMadtLocalNmi;
-
-struct AcpiMadtProcessorX2Apic {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t x2apic_id;              /* Processor's local x2APIC ID */
-    uint32_t flags;
-    uint32_t uid;                    /* Processor object _UID */
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorX2Apic AcpiMadtProcessorX2Apic;
-
-struct AcpiMadtLocalX2ApicNmi {
-    ACPI_SUB_HEADER_DEF
-    uint16_t flags;                  /* MPS INTI flags */
-    uint32_t uid;                    /* Processor object _UID */
-    uint8_t  lint;                   /* Local APIC LINT# */
-    uint8_t  reserved[3];            /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalX2ApicNmi AcpiMadtLocalX2ApicNmi;
-
 struct AcpiMadtGenericCpuInterface {
     ACPI_SUB_HEADER_DEF
     uint16_t reserved;
hw/i386/acpi-common.c +0 -1
index 7983a13a93..aa7b5c357e 100644
--- a/hw/i386/acpi-common.c
Quoted 8 lines

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 41

Quoted 7 lines

+++ b/hw/i386/acpi-common.c

hw/i386/acpi-common.c +1 -1
@@ -38,7 +38,9 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
                        bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
-    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
+    /* Flags – Local APIC Flags */  

nit: move that comment at the place of the build_append_int_noprefix

that place(s) already has comment in expected format, here is just reminder about what is initialized here.

Quoted 13 lines
Quoted 13 lines
hw/i386/acpi-common.c +2 -4
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ?
+                     1 /* Enabled */ : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -47,24 +49,47 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
      * should be put in MADT but kept disabled.
      */
     if (apic_id < 255) {
-        AcpiMadtProcessorApic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_PROCESSOR;
-        apic->length = sizeof(*apic);
Quoted 8 lines

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 55

Quoted 7 lines
hw/i386/acpi-common.c +4 -3
-        apic->processor_id = uid;
-        apic->local_apic_id = apic_id;
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 1.0b, Table 5-13 Processor Local APIC Structure */
+        build_append_int_noprefix(entry, 0, 1);       /* Type */
+        build_append_int_noprefix(entry, 8, 1);       /* Length */
+        build_append_int_noprefix(entry, uid, 1);     /* ACPI Processor ID */  

nit s/ID/UID

it's ID in 1.0b

Quoted 153 lines
Quoted 86 lines
hw/i386/acpi-common.c +38 -26
+        build_append_int_noprefix(entry, apic_id, 1); /* APIC ID */
+        build_append_int_noprefix(entry, flags, 4); /* Flags */
     } else {
-        AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_LOCAL_X2APIC;
-        apic->length = sizeof(*apic);
-        apic->uid = cpu_to_le32(uid);
-        apic->x2apic_id = cpu_to_le32(apic_id);
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 4.0, 5.2.12.12 Processor Local x2APIC Structure */
+        build_append_int_noprefix(entry, 9, 1);       /* Type */
+        build_append_int_noprefix(entry, 16, 1);      /* Length */
+        build_append_int_noprefix(entry, 0, 2);       /* Reserved */
+        build_append_int_noprefix(entry, apic_id, 4); /* X2APIC ID */
+        build_append_int_noprefix(entry, flags, 4);   /* Flags */
+        build_append_int_noprefix(entry, uid, 4);     /* ACPI Processor UID */
     }
 }
 
+static void build_ioapic(GArray *entry, uint8_t id, uint32_t addr, uint32_t irq)
+{
+    /* Rev 1.0b, 5.2.8.2 IO APIC */
+    build_append_int_noprefix(entry, 1, 1);    /* Type */
+    build_append_int_noprefix(entry, 12, 1);   /* Length */
+    build_append_int_noprefix(entry, id, 1);   /* IO APIC ID */
+    build_append_int_noprefix(entry, 0, 1);    /* Reserved */
+    build_append_int_noprefix(entry, addr, 4); /* IO APIC Address */
+    build_append_int_noprefix(entry, irq, 4);  /* System Vector Base */
+}
+
+static void
+build_xrupt_override(GArray *entry, uint8_t src, uint32_t gsi, uint16_t flags)
+{
+    /* Rev 1.0b, 5.2.8.3.1 Interrupt Source Overrides */
+    build_append_int_noprefix(entry, 2, 1);  /* Type */
+    build_append_int_noprefix(entry, 10, 1); /* Length */
+    build_append_int_noprefix(entry, 0, 1);  /* Bus */
+    build_append_int_noprefix(entry, src, 1);  /* Source */
+    /* Global System Interrupt Vector */
+    build_append_int_noprefix(entry, gsi, 4);
+    build_append_int_noprefix(entry, flags, 2);  /* Flags */
+}
+
 /*
  * ACPI spec, Revision 1.0b
  * 5.2.8 Multiple APIC Description Table
@@ -73,14 +98,11 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
+    int i;
+    bool x2apic_mode = false;
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
-    bool x2apic_mode = false;
-
-    AcpiMadtIoApic *io_apic;
-    AcpiMadtIntsrcovr *intsrcovr;
-    int i;
     AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
                         .oem_table_id = oem_table_id };
 
@@ -96,30 +118,14 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         }
     }
 
-    io_apic = acpi_data_push(table_data, sizeof *io_apic);
-    io_apic->type = ACPI_APIC_IO;
-    io_apic->length = sizeof(*io_apic);
-    io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID;
-    io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS);
-    io_apic->interrupt = cpu_to_le32(0);
-
+    build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID, IO_APIC_DEFAULT_ADDRESS, 0);
     if (x86ms->ioapic2) {
-        AcpiMadtIoApic *io_apic2;
-        io_apic2 = acpi_data_push(table_data, sizeof *io_apic);
-        io_apic2->type = ACPI_APIC_IO;
-        io_apic2->length = sizeof(*io_apic);
-        io_apic2->io_apic_id = ACPI_BUILD_IOAPIC_ID + 1;
-        io_apic2->address = cpu_to_le32(IO_APIC_SECONDARY_ADDRESS);
-        io_apic2->interrupt = cpu_to_le32(IO_APIC_SECONDARY_IRQBASE);
+        build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID + 1,
+                     IO_APIC_SECONDARY_ADDRESS, IO_APIC_SECONDARY_IRQBASE);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 128

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
     }
 
     if (x86ms->apic_xrupt_override) {
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = 0;
-        intsrcovr->gsi    = cpu_to_le32(2);
-        intsrcovr->flags  = cpu_to_le16(0); /* conforms to bus specifications */
+        build_xrupt_override(table_data, 0, 2, 0);  

lost /* conforms to bus specifications */ comment for the flag during the battle/ Don't know if it is useful though

Quoted 4 lines
hw/i386/acpi-common.c +0 -0
     }
 
     for (i = 1; i < 16; i++) {

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 136

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
@@ -127,32 +133,29 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
             /* No need for a INT source override structure. */
             continue;
         }
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = i;
-        intsrcovr->gsi    = cpu_to_le32(i);
-        intsrcovr->flags  = cpu_to_le16(0xd); /* active high, level triggered */
+        build_xrupt_override(table_data, i, i, 0xd);  

Lost for the flag /* active high, level triggered */

Quoted 9 lines
hw/i386/acpi-common.c +0 -6
     }
 
     if (x2apic_mode) {
-        AcpiMadtLocalX2ApicNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);
-        local_nmi->type   = ACPI_APIC_LOCAL_X2APIC_NMI;
-        local_nmi->length = sizeof(*local_nmi);
-        local_nmi->uid    = 0xFFFFFFFF; /* all processors */

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 147

Quoted 10 lines
hw/i386/acpi-common.c +8 -2
-        local_nmi->flags  = cpu_to_le16(0);
-        local_nmi->lint   = 1; /* ACPI_LINT1 */
+        /* Rev 4.0, 5.2.12.13 Local x2APIC NMI Structure*/
+        build_append_int_noprefix(table_data, 0xA, 1); /* Type */
+        build_append_int_noprefix(table_data, 12, 1);  /* Length */
+        build_append_int_noprefix(table_data, 0, 2);   /* Flags */
+        /* ACPI Processor UID */
+        build_append_int_noprefix(table_data, 0xFFFFFFFF /* all processors */,
+                                  4);
+        /* Local x2APIC INTI# */  

Local x2APIC LINT#

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 149

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
+        build_append_int_noprefix(table_data, 0, 3);  

/* reserved */

Quoted 14 lines
hw/i386/acpi-common.c +5 -8
     } else {
-        AcpiMadtLocalNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);
-        local_nmi->type         = ACPI_APIC_LOCAL_NMI;
-        local_nmi->length       = sizeof(*local_nmi);
-        local_nmi->processor_id = 0xff; /* all processors */
-        local_nmi->flags        = cpu_to_le16(0);
-        local_nmi->lint         = 1; /* ACPI_LINT1 */
+        /* Rev 1.0b, 5.2.8.3.3 Local APIC NMI */
+        build_append_int_noprefix(table_data, 4, 1);  /* Type */
+        build_append_int_noprefix(table_data, 6, 1);  /* Length */
+        /* ACPI Processor ID */
+        build_append_int_noprefix(table_data, 0xff /* all processors */, 1);  
Quoted 7 lines
Quoted 5 lines

0xFF

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 157

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 0, 2);  /* Flags */
+        /* Local APIC INTI# */  

Local APIC LINT#

it's "Local APIC INTI#" in 1.0b

OK sorry for the noise. Maybe we should add this link somewhere
https://uefi.org/acpi/specs

I may have looked at some other references when reviewing.

Thanks

Eric

Quoted 15 lines
Quoted 6 lines

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 161

Quoted 6 lines
hw/i386/acpi-common.c +1 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
     }
 
     acpi_table_end(linker, &table);

the rest is fixed up

Quoted 5 lines

Besides

Eric

#55 lore raw

Re: [PATCH v3 24/35] acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table

Quoted 297 lines · On Wed, 22 Sep 2021 17:37:40 +0200 Eric Auger <[email protected]> wrote:

Hi,

Quoted 295 lines · Igor Mammedov
Quoted 99 lines · On Wed, 22 Sep 2021 12:20:54 +0200 Eric Auger <[email protected]> wrote:
Quoted 98 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h |  64 ------------------
 hw/i386/acpi-common.c       | 127 ++++++++++++++++++------------------
 2 files changed, 65 insertions(+), 126 deletions(-)
include/hw/acpi/acpi-defs.h +0 -64
index af4fa412a5..3f174ba208 100644
@@ -165,17 +165,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Values for Type in APIC sub-headers */
 
-#define ACPI_APIC_PROCESSOR          0
-#define ACPI_APIC_IO                 1
-#define ACPI_APIC_XRUPT_OVERRIDE     2
-#define ACPI_APIC_NMI                3
-#define ACPI_APIC_LOCAL_NMI          4
-#define ACPI_APIC_ADDRESS_OVERRIDE   5
-#define ACPI_APIC_IO_SAPIC           6
-#define ACPI_APIC_LOCAL_SAPIC        7
-#define ACPI_APIC_XRUPT_SOURCE       8
-#define ACPI_APIC_LOCAL_X2APIC       9
-#define ACPI_APIC_LOCAL_X2APIC_NMI      10
 #define ACPI_APIC_GENERIC_CPU_INTERFACE 11
 #define ACPI_APIC_GENERIC_DISTRIBUTOR   12
 #define ACPI_APIC_GENERIC_MSI_FRAME     13
@@ -192,59 +181,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Sub-structures for MADT */
 
-struct AcpiMadtProcessorApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint8_t  local_apic_id;          /* Processor's local APIC id */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorApic AcpiMadtProcessorApic;
-
-struct AcpiMadtIoApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  io_apic_id;             /* I/O APIC ID */
-    uint8_t  reserved;               /* Reserved - must be zero */
-    uint32_t address;                /* APIC physical address */
-    uint32_t interrupt;              /* Global system interrupt where INTI
-                                 * lines start */
-} QEMU_PACKED;
-typedef struct AcpiMadtIoApic AcpiMadtIoApic;
-
-struct AcpiMadtIntsrcovr {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  bus;
-    uint8_t  source;
-    uint32_t gsi;
-    uint16_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtIntsrcovr AcpiMadtIntsrcovr;
-
-struct AcpiMadtLocalNmi {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint16_t flags;                  /* MPS INTI flags */
-    uint8_t  lint;                   /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalNmi AcpiMadtLocalNmi;
-
-struct AcpiMadtProcessorX2Apic {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t x2apic_id;              /* Processor's local x2APIC ID */
-    uint32_t flags;
-    uint32_t uid;                    /* Processor object _UID */
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorX2Apic AcpiMadtProcessorX2Apic;
-
-struct AcpiMadtLocalX2ApicNmi {
-    ACPI_SUB_HEADER_DEF
-    uint16_t flags;                  /* MPS INTI flags */
-    uint32_t uid;                    /* Processor object _UID */
-    uint8_t  lint;                   /* Local APIC LINT# */
-    uint8_t  reserved[3];            /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalX2ApicNmi AcpiMadtLocalX2ApicNmi;
-
 struct AcpiMadtGenericCpuInterface {
     ACPI_SUB_HEADER_DEF
     uint16_t reserved;
hw/i386/acpi-common.c +0 -1
index 7983a13a93..aa7b5c357e 100644
--- a/hw/i386/acpi-common.c
Quoted 8 lines

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 41

Quoted 7 lines

+++ b/hw/i386/acpi-common.c

hw/i386/acpi-common.c +1 -1
@@ -38,7 +38,9 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
                        bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
-    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
+    /* Flags – Local APIC Flags */    

nit: move that comment at the place of the build_append_int_noprefix

that place(s) already has comment in expected format, here is just reminder about what is initialized here.

Quoted 13 lines
Quoted 13 lines
hw/i386/acpi-common.c +2 -4
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ?
+                     1 /* Enabled */ : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -47,24 +49,47 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
      * should be put in MADT but kept disabled.
      */
     if (apic_id < 255) {
-        AcpiMadtProcessorApic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_PROCESSOR;
-        apic->length = sizeof(*apic);
Quoted 8 lines

hw/i386/acpi-common.c void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid, · line 55

Quoted 7 lines
hw/i386/acpi-common.c +4 -3
-        apic->processor_id = uid;
-        apic->local_apic_id = apic_id;
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 1.0b, Table 5-13 Processor Local APIC Structure */
+        build_append_int_noprefix(entry, 0, 1);       /* Type */
+        build_append_int_noprefix(entry, 8, 1);       /* Length */
+        build_append_int_noprefix(entry, uid, 1);     /* ACPI Processor ID */    

nit s/ID/UID

it's ID in 1.0b

Quoted 157 lines
Quoted 86 lines
hw/i386/acpi-common.c +38 -26
+        build_append_int_noprefix(entry, apic_id, 1); /* APIC ID */
+        build_append_int_noprefix(entry, flags, 4); /* Flags */
     } else {
-        AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
-
-        apic->type = ACPI_APIC_LOCAL_X2APIC;
-        apic->length = sizeof(*apic);
-        apic->uid = cpu_to_le32(uid);
-        apic->x2apic_id = cpu_to_le32(apic_id);
-        apic->flags = cpu_to_le32(flags);
+        /* Rev 4.0, 5.2.12.12 Processor Local x2APIC Structure */
+        build_append_int_noprefix(entry, 9, 1);       /* Type */
+        build_append_int_noprefix(entry, 16, 1);      /* Length */
+        build_append_int_noprefix(entry, 0, 2);       /* Reserved */
+        build_append_int_noprefix(entry, apic_id, 4); /* X2APIC ID */
+        build_append_int_noprefix(entry, flags, 4);   /* Flags */
+        build_append_int_noprefix(entry, uid, 4);     /* ACPI Processor UID */
     }
 }
 
+static void build_ioapic(GArray *entry, uint8_t id, uint32_t addr, uint32_t irq)
+{
+    /* Rev 1.0b, 5.2.8.2 IO APIC */
+    build_append_int_noprefix(entry, 1, 1);    /* Type */
+    build_append_int_noprefix(entry, 12, 1);   /* Length */
+    build_append_int_noprefix(entry, id, 1);   /* IO APIC ID */
+    build_append_int_noprefix(entry, 0, 1);    /* Reserved */
+    build_append_int_noprefix(entry, addr, 4); /* IO APIC Address */
+    build_append_int_noprefix(entry, irq, 4);  /* System Vector Base */
+}
+
+static void
+build_xrupt_override(GArray *entry, uint8_t src, uint32_t gsi, uint16_t flags)
+{
+    /* Rev 1.0b, 5.2.8.3.1 Interrupt Source Overrides */
+    build_append_int_noprefix(entry, 2, 1);  /* Type */
+    build_append_int_noprefix(entry, 10, 1); /* Length */
+    build_append_int_noprefix(entry, 0, 1);  /* Bus */
+    build_append_int_noprefix(entry, src, 1);  /* Source */
+    /* Global System Interrupt Vector */
+    build_append_int_noprefix(entry, gsi, 4);
+    build_append_int_noprefix(entry, flags, 2);  /* Flags */
+}
+
 /*
  * ACPI spec, Revision 1.0b
  * 5.2.8 Multiple APIC Description Table
@@ -73,14 +98,11 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
+    int i;
+    bool x2apic_mode = false;
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
-    bool x2apic_mode = false;
-
-    AcpiMadtIoApic *io_apic;
-    AcpiMadtIntsrcovr *intsrcovr;
-    int i;
     AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
                         .oem_table_id = oem_table_id };
 
@@ -96,30 +118,14 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         }
     }
 
-    io_apic = acpi_data_push(table_data, sizeof *io_apic);
-    io_apic->type = ACPI_APIC_IO;
-    io_apic->length = sizeof(*io_apic);
-    io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID;
-    io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS);
-    io_apic->interrupt = cpu_to_le32(0);
-
+    build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID, IO_APIC_DEFAULT_ADDRESS, 0);
     if (x86ms->ioapic2) {
-        AcpiMadtIoApic *io_apic2;
-        io_apic2 = acpi_data_push(table_data, sizeof *io_apic);
-        io_apic2->type = ACPI_APIC_IO;
-        io_apic2->length = sizeof(*io_apic);
-        io_apic2->io_apic_id = ACPI_BUILD_IOAPIC_ID + 1;
-        io_apic2->address = cpu_to_le32(IO_APIC_SECONDARY_ADDRESS);
-        io_apic2->interrupt = cpu_to_le32(IO_APIC_SECONDARY_IRQBASE);
+        build_ioapic(table_data, ACPI_BUILD_IOAPIC_ID + 1,
+                     IO_APIC_SECONDARY_ADDRESS, IO_APIC_SECONDARY_IRQBASE);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 128

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
     }
 
     if (x86ms->apic_xrupt_override) {
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = 0;
-        intsrcovr->gsi    = cpu_to_le32(2);
-        intsrcovr->flags  = cpu_to_le16(0); /* conforms to bus specifications */
+        build_xrupt_override(table_data, 0, 2, 0);    

lost /* conforms to bus specifications */ comment for the flag during the battle/ Don't know if it is useful though

Quoted 4 lines
hw/i386/acpi-common.c +0 -0
     }
 
     for (i = 1; i < 16; i++) {

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 136

Quoted 10 lines
hw/i386/acpi-common.c +1 -6
@@ -127,32 +133,29 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
             /* No need for a INT source override structure. */
             continue;
         }
-        intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
-        intsrcovr->type   = ACPI_APIC_XRUPT_OVERRIDE;
-        intsrcovr->length = sizeof(*intsrcovr);
-        intsrcovr->source = i;
-        intsrcovr->gsi    = cpu_to_le32(i);
-        intsrcovr->flags  = cpu_to_le16(0xd); /* active high, level triggered */
+        build_xrupt_override(table_data, i, i, 0xd);    

Lost for the flag /* active high, level triggered */

Quoted 9 lines
hw/i386/acpi-common.c +0 -6
     }
 
     if (x2apic_mode) {
-        AcpiMadtLocalX2ApicNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);
-        local_nmi->type   = ACPI_APIC_LOCAL_X2APIC_NMI;
-        local_nmi->length = sizeof(*local_nmi);
-        local_nmi->uid    = 0xFFFFFFFF; /* all processors */

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 147

Quoted 10 lines
hw/i386/acpi-common.c +8 -2
-        local_nmi->flags  = cpu_to_le16(0);
-        local_nmi->lint   = 1; /* ACPI_LINT1 */
+        /* Rev 4.0, 5.2.12.13 Local x2APIC NMI Structure*/
+        build_append_int_noprefix(table_data, 0xA, 1); /* Type */
+        build_append_int_noprefix(table_data, 12, 1);  /* Length */
+        build_append_int_noprefix(table_data, 0, 2);   /* Flags */
+        /* ACPI Processor UID */
+        build_append_int_noprefix(table_data, 0xFFFFFFFF /* all processors */,
+                                  4);
+        /* Local x2APIC INTI# */    

Local x2APIC LINT#

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 149

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
+        build_append_int_noprefix(table_data, 0, 3);    

/* reserved */

Quoted 4 lines
hw/i386/acpi-common.c +0 -3
     } else {
-        AcpiMadtLocalNmi *local_nmi;
-
-        local_nmi = acpi_data_push(table_data, sizeof *local_nmi);

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 155

Quoted 10 lines
hw/i386/acpi-common.c +5 -5
-        local_nmi->type         = ACPI_APIC_LOCAL_NMI;
-        local_nmi->length       = sizeof(*local_nmi);
-        local_nmi->processor_id = 0xff; /* all processors */
-        local_nmi->flags        = cpu_to_le16(0);
-        local_nmi->lint         = 1; /* ACPI_LINT1 */
+        /* Rev 1.0b, 5.2.8.3.3 Local APIC NMI */
+        build_append_int_noprefix(table_data, 4, 1);  /* Type */
+        build_append_int_noprefix(table_data, 6, 1);  /* Length */
+        /* ACPI Processor ID */
+        build_append_int_noprefix(table_data, 0xff /* all processors */, 1);    

0xFF

Quoted 2 lines
hw/i386/acpi-common.c +2 -0
+        build_append_int_noprefix(table_data, 0, 2);  /* Flags */
+        /* Local APIC INTI# */    
Quoted 7 lines
Quoted 3 lines
Quoted 1 line

Local APIC LINT#

it's "Local APIC INTI#" in 1.0b

OK sorry for the noise. Maybe we should add this link somewhere
https://uefi.org/acpi/specs

I may have looked at some other references when reviewing.

problems with the links is that they are usually go stale
(good or rather bad example of that is so called Microsoft 'specs' html docs,
ex: early revisions of SRAT)

That's why we put in put in comment spec name and revision which is usually sufficient to reliably find a spec in question, regardless of where it's hosted at the moment.

Quoted 20 lines

Thanks

Eric

Quoted 15 lines
Quoted 6 lines

hw/i386/acpi-common.c void acpi_build_madt(GArray *table_data, BIOSLinker *linker, · line 161

Quoted 6 lines
hw/i386/acpi-common.c +1 -0
+        build_append_int_noprefix(table_data, 1 /* ACPI_LINT1 */, 1);
     }
 
     acpi_table_end(linker, &table);

the rest is fixed up

Quoted 5 lines

Besides

Eric

#56 lore raw

PATCH v3 25/35 acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v2:
* fix invalid ITS length (use v6.0 Errata instead of v60 definition)

---
 include/hw/acpi/acpi-defs.h |  84 --------------------
 hw/arm/virt-acpi-build.c    | 150 +++++++++++++++++++++---------------
 2 files changed, 90 insertions(+), 144 deletions(-)
include/hw/acpi/acpi-defs.h +0 -84
index 3f174ba208..bcada37601 100644
@@ -163,90 +163,6 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/* Values for Type in APIC sub-headers */
-
-#define ACPI_APIC_GENERIC_CPU_INTERFACE 11
-#define ACPI_APIC_GENERIC_DISTRIBUTOR   12
-#define ACPI_APIC_GENERIC_MSI_FRAME     13
-#define ACPI_APIC_GENERIC_REDISTRIBUTOR 14
-#define ACPI_APIC_GENERIC_TRANSLATOR    15
-#define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
-
-/*
- * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
- */
-#define ACPI_SUB_HEADER_DEF   /* Common ACPI sub-structure header */\
-    uint8_t  type;                               \
-    uint8_t  length;
-
-/* Sub-structures for MADT */
-
-struct AcpiMadtGenericCpuInterface {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t cpu_interface_number;
-    uint32_t uid;
-    uint32_t flags;
-    uint32_t parking_version;
-    uint32_t performance_interrupt;
-    uint64_t parked_address;
-    uint64_t base_address;
-    uint64_t gicv_base_address;
-    uint64_t gich_base_address;
-    uint32_t vgic_interrupt;
-    uint64_t gicr_base_address;
-    uint64_t arm_mpidr;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericCpuInterface AcpiMadtGenericCpuInterface;
-
-/* GICC CPU Interface Flags */
-#define ACPI_MADT_GICC_ENABLED 1
-
-struct AcpiMadtGenericDistributor {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t gic_id;
-    uint64_t base_address;
-    uint32_t global_irq_base;
-    /* ACPI 5.1 Errata 1228 Present GIC version in MADT table */
-    uint8_t version;
-    uint8_t reserved2[3];
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericDistributor AcpiMadtGenericDistributor;
-
-struct AcpiMadtGenericMsiFrame {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t gic_msi_frame_id;
-    uint64_t base_address;
-    uint32_t flags;
-    uint16_t spi_count;
-    uint16_t spi_base;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericMsiFrame AcpiMadtGenericMsiFrame;
-
-struct AcpiMadtGenericRedistributor {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint64_t base_address;
-    uint32_t range_length;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericRedistributor AcpiMadtGenericRedistributor;
-
-struct AcpiMadtGenericTranslator {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t translation_id;
-    uint64_t base_address;
-    uint32_t reserved2;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericTranslator AcpiMadtGenericTranslator;
-
 /*
  * Generic Timer Description Table (GTDT)
  */
hw/arm/virt-acpi-build.c +90 -60

184 lines not on this page · raw message

Signature · 1 line
2.27.0
#57 lore raw

PATCH v3 26/35 acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-microvm.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
hw/i386/acpi-microvm.c +6 -7
index 1a0f77b911..196d318499 100644
@@ -113,16 +113,16 @@ build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
     Aml *dsdt, *sb_scope, *scope, *pkg;
     bool ambiguous;
     Object *isabus;
+    AcpiTable table = { .sig = "DSDT", .rev = 2, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
     isabus = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
     assert(isabus);
     assert(!ambiguous);
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("_SB");
     fw_cfg_add_acpi_dsdt(sb_scope, x86ms->fw_cfg);
     isa_build_aml(ISA_BUS(isabus), sb_scope);
@@ -144,11 +144,10 @@ build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
     aml_append(scope, aml_name_decl("_S5", pkg));
     aml_append(dsdt, scope);
 
-    /* copy AML table into ACPI tables blob and patch header there */
+    /* copy AML bytecode into ACPI tables blob */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 2, x86ms->oem_id, x86ms->oem_table_id);
+
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
Reviewed-by on v3 26/35
#58 lore raw

Re: [PATCH v3 26/35] acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 5 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Eric

Quoted 50 lines

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-microvm.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
hw/i386/acpi-microvm.c +6 -7
index 1a0f77b911..196d318499 100644
@@ -113,16 +113,16 @@ build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
     Aml *dsdt, *sb_scope, *scope, *pkg;
     bool ambiguous;
     Object *isabus;
+    AcpiTable table = { .sig = "DSDT", .rev = 2, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
     isabus = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
     assert(isabus);
     assert(!ambiguous);
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("_SB");
     fw_cfg_add_acpi_dsdt(sb_scope, x86ms->fw_cfg);
     isa_build_aml(ISA_BUS(isabus), sb_scope);
@@ -144,11 +144,10 @@ build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
     aml_append(scope, aml_name_decl("_S5", pkg));
     aml_append(dsdt, scope);
 
-    /* copy AML table into ACPI tables blob and patch header there */
+    /* copy AML bytecode into ACPI tables blob */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 2, x86ms->oem_id, x86ms->oem_table_id);
+
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
#59 lore raw

PATCH v3 27/35 acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/arm/virt-acpi-build.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
hw/arm/virt-acpi-build.c +6 -7
index a9a78d904a..4b9687439d 100644
@@ -729,10 +729,11 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     MachineState *ms = MACHINE(vms);
     const MemMapEntry *memmap = vms->memmap;
     const int *irqmap = vms->irqmap;
+    AcpiTable table = { .sig = "DSDT", .rev = 2, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
 
     /* When booting the VM with UEFI, UEFI takes ownership of the RTC hardware.
      * While UEFI can use libfdt to disable the RTC device node in the DTB that
@@ -779,12 +780,10 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 
     aml_append(dsdt, scope);
 
-    /* copy AML table into ACPI tables blob and patch header there */
+    /* copy AML table into ACPI tables blob */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 2, vms->oem_id,
-                 vms->oem_table_id);
+
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
#60 lore raw

PATCH v3 28/35 acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* fix conflicts due to
42e0f050e3a51 'hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3'
* * s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 ------------
 hw/arm/virt-acpi-build.c    | 45 ++++++++++++++++---------------------
 2 files changed, 19 insertions(+), 40 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index bcada37601..195f90caf6 100644
@@ -188,20 +188,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * Input Output Remapping Table (IORT)
- * Conforms to "IO Remapping Table System Software on ARM Platforms",
- * Document number: ARM DEN 0049B, October 2015
- */
-
-struct AcpiIortTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t node_count;
-    uint32_t node_offset;
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiIortTable AcpiIortTable;
-
 /*
  * IORT node types
  */
hw/arm/virt-acpi-build.c +19 -26

92 lines not on this page · raw message

Signature · 1 line
2.27.0
Reviewed-by Tested-by on v3 28/35
#61 lore raw

Re: [PATCH v3 28/35] acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 138 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* fix conflicts due to
42e0f050e3a51 'hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3'
* * s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 ------------
 hw/arm/virt-acpi-build.c    | 45 ++++++++++++++++---------------------
 2 files changed, 19 insertions(+), 40 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index bcada37601..195f90caf6 100644
@@ -188,20 +188,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * Input Output Remapping Table (IORT)
- * Conforms to "IO Remapping Table System Software on ARM Platforms",
- * Document number: ARM DEN 0049B, October 2015
- */
-
-struct AcpiIortTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t node_count;
-    uint32_t node_offset;
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiIortTable AcpiIortTable;
-
 /*
  * IORT node types
  */
hw/arm/virt-acpi-build.c +19 -19
index 4b9687439d..bceb1b3b7e 100644
@@ -273,22 +273,29 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
     return idmap_a->input_base - idmap_b->input_base;
 }
 
+/*
+ * Input Output Remapping Table (IORT)
+ * Conforms to "IO Remapping Table System Software on ARM Platforms",
+ * Document number: ARM DEN 0049B, October 2015
+ */
 static void
 build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    int i, nb_nodes, rc_mapping_count, iort_start = table_data->len;
+    int i, nb_nodes, rc_mapping_count;
     AcpiIortIdMapping *idmap;
     AcpiIortItsGroup *its;
-    AcpiIortTable *iort;
     AcpiIortSmmu3 *smmu;
-    size_t node_size, iort_node_offset, iort_length, smmu_offset = 0;
     AcpiIortRC *rc;
+    const uint32_t iort_node_offset = 48;
+    size_t node_size, smmu_offset = 0;
     GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
     GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
 
-    iort = acpi_data_push(table_data, sizeof(*iort));
+    AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
+
         AcpiIortIdMapping next_range = {0};
 
         object_child_foreach_recursive(object_get_root(),
@@ -325,18 +332,16 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         rc_mapping_count = 1;
     }
 
-    iort_length = sizeof(*iort);
-    iort->node_count = cpu_to_le32(nb_nodes);
-    /*
-     * Use a copy in case table_data->data moves during acpi_data_push
-     * operations.
-     */
-    iort_node_offset = sizeof(*iort);
-    iort->node_offset = cpu_to_le32(iort_node_offset);
+    /* Table 2 The IORT */
+    acpi_table_begin(&table, table_data);
+    /* Number of IORT Nodes */
+    build_append_int_noprefix(table_data, nb_nodes, 4);
+    /* Offset to Array of IORT Nodes */
+    build_append_int_noprefix(table_data, iort_node_offset, 4);
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
     /* ITS group node */
     node_size =  sizeof(*its) + sizeof(uint32_t);
-    iort_length += node_size;
     its = acpi_data_push(table_data, node_size);
 
     its->type = ACPI_IORT_NODE_ITS_GROUP;
@@ -350,7 +355,6 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         /* SMMUv3 node */
         smmu_offset = iort_node_offset + node_size;
         node_size = sizeof(*smmu) + sizeof(*idmap);
-        iort_length += node_size;
         smmu = acpi_data_push(table_data, node_size);
 
         smmu->type = ACPI_IORT_NODE_SMMU_V3;
@@ -375,7 +379,6 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 
     /* Root Complex Node */
     node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
-    iort_length += node_size;
     rc = acpi_data_push(table_data, node_size);
 
     rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
@@ -424,19 +427,9 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         idmap->output_reference = cpu_to_le32(iort_node_offset);
     }
 
+    acpi_table_end(linker, &table);
     g_array_free(smmu_idmaps, true);
     g_array_free(its_idmaps, true);
-
-    /*
-     * Update the pointer address in case table_data->data moves during above
-     * acpi_data_push operations.

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 435

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
-     */
-    iort = (AcpiIortTable *)(table_data->data + iort_start);
-    iort->length = cpu_to_le32(iort_length);
-
-    build_header(linker, table_data, (void *)(table_data->data + iort_start),
-                 "IORT", table_data->len - iort_start, 0, vms->oem_id,
-                 vms->oem_table_id);
 }
 
 static void

Eric

#62 lore raw

Re: [PATCH v3 28/35] acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

Hi Igor,

Quoted 71 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* fix conflicts due to
42e0f050e3a51 'hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3'
* * s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 ------------
 hw/arm/virt-acpi-build.c    | 45 ++++++++++++++++---------------------
 2 files changed, 19 insertions(+), 40 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index bcada37601..195f90caf6 100644
@@ -188,20 +188,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * Input Output Remapping Table (IORT)
- * Conforms to "IO Remapping Table System Software on ARM Platforms",
- * Document number: ARM DEN 0049B, October 2015
- */
-
-struct AcpiIortTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t node_count;
-    uint32_t node_offset;
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiIortTable AcpiIortTable;
-
 /*
  * IORT node types
  */
hw/arm/virt-acpi-build.c +7 -3
index 4b9687439d..bceb1b3b7e 100644
@@ -273,22 +273,29 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
     return idmap_a->input_base - idmap_b->input_base;
 }
 
+/*
+ * Input Output Remapping Table (IORT)
+ * Conforms to "IO Remapping Table System Software on ARM Platforms",
+ * Document number: ARM DEN 0049B, October 2015
+ */
 static void
 build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    int i, nb_nodes, rc_mapping_count, iort_start = table_data->len;
+    int i, nb_nodes, rc_mapping_count;
     AcpiIortIdMapping *idmap;
     AcpiIortItsGroup *its;
-    AcpiIortTable *iort;
     AcpiIortSmmu3 *smmu;
-    size_t node_size, iort_node_offset, iort_length, smmu_offset = 0;
     AcpiIortRC *rc;
+    const uint32_t iort_node_offset = 48;

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 298

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -1
+    size_t node_size, smmu_offset = 0;
     GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
     GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
 
-    iort = acpi_data_push(table_data, sizeof(*iort));
+    AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
+

forgot this minor comment
nit: spurious change

Eric

Quoted 67 lines
hw/arm/virt-acpi-build.c +8 -22
         AcpiIortIdMapping next_range = {0};
 
         object_child_foreach_recursive(object_get_root(),
@@ -325,18 +332,16 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         rc_mapping_count = 1;
     }
 
-    iort_length = sizeof(*iort);
-    iort->node_count = cpu_to_le32(nb_nodes);
-    /*
-     * Use a copy in case table_data->data moves during acpi_data_push
-     * operations.
-     */
-    iort_node_offset = sizeof(*iort);
-    iort->node_offset = cpu_to_le32(iort_node_offset);
+    /* Table 2 The IORT */
+    acpi_table_begin(&table, table_data);
+    /* Number of IORT Nodes */
+    build_append_int_noprefix(table_data, nb_nodes, 4);
+    /* Offset to Array of IORT Nodes */
+    build_append_int_noprefix(table_data, iort_node_offset, 4);
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
     /* ITS group node */
     node_size =  sizeof(*its) + sizeof(uint32_t);
-    iort_length += node_size;
     its = acpi_data_push(table_data, node_size);
 
     its->type = ACPI_IORT_NODE_ITS_GROUP;
@@ -350,7 +355,6 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         /* SMMUv3 node */
         smmu_offset = iort_node_offset + node_size;
         node_size = sizeof(*smmu) + sizeof(*idmap);
-        iort_length += node_size;
         smmu = acpi_data_push(table_data, node_size);
 
         smmu->type = ACPI_IORT_NODE_SMMU_V3;
@@ -375,7 +379,6 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 
     /* Root Complex Node */
     node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
-    iort_length += node_size;
     rc = acpi_data_push(table_data, node_size);
 
     rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
@@ -424,19 +427,9 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         idmap->output_reference = cpu_to_le32(iort_node_offset);
     }
 
+    acpi_table_end(linker, &table);
     g_array_free(smmu_idmaps, true);
     g_array_free(its_idmaps, true);
-
-    /*
-     * Update the pointer address in case table_data->data moves during above
-     * acpi_data_push operations.
-     */
-    iort = (AcpiIortTable *)(table_data->data + iort_start);
-    iort->length = cpu_to_le32(iort_length);
-
-    build_header(linker, table_data, (void *)(table_data->data + iort_start),
-                 "IORT", table_data->len - iort_start, 0, vms->oem_id,
-                 vms->oem_table_id);
 }
 
 static void
#63 lore raw

PATCH v3 29/35 acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

In reply to Igor Mammedov

---
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ---------------
 hw/arm/virt-acpi-build.c    | 167 ++++++++++++++++++++----------------
 2 files changed, 91 insertions(+), 147 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +91 -76

221 lines not on this page · raw message

Signature · 1 line
2.27.0
#64 lore raw

Re: [PATCH v3 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

Quoted 130 lines · Igor Mammedov

---
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ---------------
 hw/arm/virt-acpi-build.c    | 167 ++++++++++++++++++++----------------
 2 files changed, 91 insertions(+), 147 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +22 -0
index bceb1b3b7e..4c682e7b09 100644
@@ -240,6 +240,28 @@ static void acpi_dsdt_add_tpm(Aml *scope, VirtMachineState *vms)
 }
 #endif
 
+#define ID_MAPPING_ENTRY_SIZE 20
+#define SMMU_V3_ENTRY_SIZE 60
+#define ROOT_COMPLEX_ENTRY_SIZE 32
+#define IORT_NODE_OFFSET 48
+
+static void build_iort_id_mapping(GArray *table_data, uint32_t input_base,
+                                  uint32_t id_count, uint32_t out_ref)
+{
+    /* Identity RID mapping covering the whole input RID range */
+    build_append_int_noprefix(table_data, input_base, 4); /* Input base */
+    build_append_int_noprefix(table_data, id_count, 4); /* Number of IDs */
+    build_append_int_noprefix(table_data, input_base, 4); /* Output base */
+    build_append_int_noprefix(table_data, out_ref, 4); /* Output Reference */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+}
+
+struct AcpiIortIdMapping {
+    uint32_t input_base;
+    uint32_t id_count;
+};
+typedef struct AcpiIortIdMapping AcpiIortIdMapping;
+
 /* Build the iort ID mapping to SMMUv3 for a given PCI host bridge */
 static int
 iort_host_bridges(Object *obj, void *opaque)

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 307

Quoted 10 lines
hw/arm/virt-acpi-build.c +1 -5
@@ -281,18 +303,17 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
 static void
 build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    int i, nb_nodes, rc_mapping_count;
-    AcpiIortIdMapping *idmap;
-    AcpiIortItsGroup *its;
-    AcpiIortSmmu3 *smmu;
-    AcpiIortRC *rc;
+    int i, rc_mapping_count;
     const uint32_t iort_node_offset = 48;

can be replaced by IORT_NODE_OFFSET now

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 316

Quoted 9 lines
hw/arm/virt-acpi-build.c +3 -0
     size_t node_size, smmu_offset = 0;
+    AcpiIortIdMapping *idmap;
     GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
     GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
 
     AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
                         .oem_table_id = vms->oem_table_id };
+    /* Table 2 The IORT */
+    acpi_table_begin(&table, table_data);

nit: you could have done this move in previous patch.

Quoted 6 lines
hw/arm/virt-acpi-build.c +0 -0
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
 
@@ -325,106 +346,100 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
             g_array_append_val(its_idmaps, next_range);
         }

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 355

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -2
 
-        nb_nodes = 3; /* RC, ITS, SMMUv3 */
         rc_mapping_count = smmu_idmaps->len + its_idmaps->len;
+        /* Number of IORT Nodes */
+        build_append_int_noprefix(table_data, 3 /* RC, ITS, SMMUv3 */, 4);
     } else {
-        nb_nodes = 2; /* RC, ITS */
         rc_mapping_count = 1;
+        /* Number of IORT Nodes */
+        build_append_int_noprefix(table_data, 2 /* RC, ITS */, 4);

I think I would prefer to keep the nb_nodes variable and do the corresponding build_append_int_noprefix only once. There may be additional nodes added with increased complexity and potential extra duplication.

Quoted 69 lines
hw/arm/virt-acpi-build.c +24 -36
     }
 
-    /* Table 2 The IORT */
-    acpi_table_begin(&table, table_data);
-    /* Number of IORT Nodes */
-    build_append_int_noprefix(table_data, nb_nodes, 4);
     /* Offset to Array of IORT Nodes */
-    build_append_int_noprefix(table_data, iort_node_offset, 4);
+    build_append_int_noprefix(table_data, IORT_NODE_OFFSET, 4);
     build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
-    /* ITS group node */
-    node_size =  sizeof(*its) + sizeof(uint32_t);
-    its = acpi_data_push(table_data, node_size);
-
-    its->type = ACPI_IORT_NODE_ITS_GROUP;
-    its->length = cpu_to_le16(node_size);
-    its->its_count = cpu_to_le32(1);
-    its->identifiers[0] = 0; /* MADT translation_id */
+    /* 3.1.1.3 ITS group node */
+    build_append_int_noprefix(table_data, 0 /* ITS Group */, 1); /* Type */
+    node_size =  20 /* fixed header size */ + 4 /* 1 GIC ITS Identifier */;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4); /* Number of ID mappings */
+    build_append_int_noprefix(table_data, 0, 4); /* Reference to ID Array */
+    build_append_int_noprefix(table_data, 1, 4); /* Number of ITSs */
+    /* GIC ITS Identifier Array */
+    build_append_int_noprefix(table_data, 0 /* MADT translation_id */, 4);
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         int irq =  vms->irqmap[VIRT_SMMU] + ARM_SPI_BASE;
 
-        /* SMMUv3 node */
-        smmu_offset = iort_node_offset + node_size;
-        node_size = sizeof(*smmu) + sizeof(*idmap);
-        smmu = acpi_data_push(table_data, node_size);
-
-        smmu->type = ACPI_IORT_NODE_SMMU_V3;
-        smmu->length = cpu_to_le16(node_size);
-        smmu->mapping_count = cpu_to_le32(1);
-        smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
-        smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
-        smmu->flags = cpu_to_le32(ACPI_IORT_SMMU_V3_COHACC_OVERRIDE);
-        smmu->event_gsiv = cpu_to_le32(irq);
-        smmu->pri_gsiv = cpu_to_le32(irq + 1);
-        smmu->sync_gsiv = cpu_to_le32(irq + 2);
-        smmu->gerr_gsiv = cpu_to_le32(irq + 3);
-
-        /* Identity RID mapping covering the whole input RID range */
-        idmap = &smmu->id_mapping_array[0];
-        idmap->input_base = 0;
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = 0;
-        /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        smmu_offset = table_data->len - table.table_offset;
+        /* 3.1.1.2 SMMUv3 */
+        build_append_int_noprefix(table_data, 4 /* SMMUv3 */, 1); /* Type */
+        node_size =  SMMU_V3_ENTRY_SIZE + ID_MAPPING_ENTRY_SIZE;
+        build_append_int_noprefix(table_data, node_size, 2); /* Length */
+        build_append_int_noprefix(table_data, 0, 1); /* Revision */
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 1, 4); /* Number of ID mappings */
+        /* Reference to ID Array */
+        build_append_int_noprefix(table_data, SMMU_V3_ENTRY_SIZE, 4);
+        /* Base address */
+        build_append_int_noprefix(table_data, vms->memmap[VIRT_SMMU].base, 8);

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 398

Quoted 10 lines
hw/arm/virt-acpi-build.c +10 -0
+        /* Flags */
+        build_append_int_noprefix(table_data, 1 /* COHACC OverrideNote */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 0, 8); /* VATOS address */
+        /* Model */
+        build_append_int_noprefix(table_data, 0 /* Generic SMMU-v3 */, 4);
+        build_append_int_noprefix(table_data, irq, 4); /* Event */
+        build_append_int_noprefix(table_data, irq + 1, 4); /* PRI */
+        build_append_int_noprefix(table_data, irq + 3, 4); /* GERR */
+        build_append_int_noprefix(table_data, irq + 2, 4); /* Sync */

Please keep that comment. I think it helps
       /* output IORT node is the ITS group node (the first node) */

Quoted 15 lines
hw/arm/virt-acpi-build.c +4 -9
+
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
-    /* Root Complex Node */
-    node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
-    rc = acpi_data_push(table_data, node_size);
-
-    rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
-    rc->length = cpu_to_le16(node_size);
-    rc->mapping_count = cpu_to_le32(rc_mapping_count);
-    rc->mapping_offset = cpu_to_le32(sizeof(*rc));
-
+    /* Table 16 Root Complex Node */
+    build_append_int_noprefix(table_data, 2 /* Root complex */, 1); /* Type */

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 414

Quoted 10 lines
hw/arm/virt-acpi-build.c +9 -0
+    node_size =  ROOT_COMPLEX_ENTRY_SIZE +
+                 ID_MAPPING_ENTRY_SIZE * rc_mapping_count;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    /* Number of ID mappings */
+    build_append_int_noprefix(table_data, rc_mapping_count, 4);
+    /* Reference to ID Array */
+    build_append_int_noprefix(table_data, ROOT_COMPLEX_ENTRY_SIZE, 4);
     /* fully coherent device */

this comment should become /* Memory access properties */ for homogenity

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 418

Quoted 8 lines
hw/arm/virt-acpi-build.c +4 -4
-    rc->memory_properties.cache_coherency = cpu_to_le32(1);
-    rc->memory_properties.memory_flags = 0x3; /* CCA = CPM = DCAS = 1 */
-    rc->pci_segment_number = 0; /* MCFG pci_segment */
-
+    build_append_int_noprefix(table_data,
+        1 | /* CCA: Cache Coherent Attribute, The device is fully coherent */
+        (3ULL << 7 * 8) /* MAF: Memory Access Flags, CCA = CPM = DCAS = 1 */,
+        8);

I think we would gain in readability if we were to split into multiple

build_append_int_noprefix according to Table 13 fields

Quoted 8 lines
hw/arm/virt-acpi-build.c +5 -0
+    build_append_int_noprefix(table_data, 0, 4); /* ATS Attribute */
+    /* MCFG pci_segment */
+    build_append_int_noprefix(table_data, 0, 4); /* PCI Segment number */
+
+    /* Output Reference */
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         AcpiIortIdMapping *range;
 

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 406

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
         /* translated RIDs connect to SMMUv3 node: RC -> SMMUv3 -> ITS */
         for (i = 0; i < smmu_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[i];
             range = &g_array_index(smmu_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
-            /* output IORT node is the smmuv3 node */
-            idmap->output_reference = cpu_to_le32(smmu_offset);

please keep the original comment

Quoted 4 lines
hw/arm/virt-acpi-build.c +2 -0
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, smmu_offset);
         }
 

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 418

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
         /* bypassed RIDs connect to ITS group node directly: RC -> ITS */
         for (i = 0; i < its_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[smmu_idmaps->len + i];
             range = &g_array_index(its_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
-            /* output IORT node is the ITS group node (the first node) */
-            idmap->output_reference = cpu_to_le32(iort_node_offset);

same, at least it helps me ;-)

Quoted 5 lines
hw/arm/virt-acpi-build.c +2 -1
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, iort_node_offset);
         }
     } else {
-        /* Identity RID mapping covering the whole input RID range */

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 445

Quoted 10 lines
hw/arm/virt-acpi-build.c +1 -5
-        idmap = &rc->id_mapping_array[0];
-        idmap->input_base = cpu_to_le32(0);
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = cpu_to_le32(0);
         /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
     acpi_table_end(linker, &table);

Thanks

Eric

#65 lore raw

Re: [PATCH v3 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

On Wed, 22 Sep 2021 15:26:49 +0200
Eric Auger <[email protected]> wrote:

I'll fix patch up as suggested,
though there is a question, see below

Quoted 287 lines · Igor Mammedov
Quoted 130 lines

---
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ---------------
 hw/arm/virt-acpi-build.c    | 167 ++++++++++++++++++++----------------
 2 files changed, 91 insertions(+), 147 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +22 -0
index bceb1b3b7e..4c682e7b09 100644
@@ -240,6 +240,28 @@ static void acpi_dsdt_add_tpm(Aml *scope, VirtMachineState *vms)
 }
 #endif
 
+#define ID_MAPPING_ENTRY_SIZE 20
+#define SMMU_V3_ENTRY_SIZE 60
+#define ROOT_COMPLEX_ENTRY_SIZE 32
+#define IORT_NODE_OFFSET 48
+
+static void build_iort_id_mapping(GArray *table_data, uint32_t input_base,
+                                  uint32_t id_count, uint32_t out_ref)
+{
+    /* Identity RID mapping covering the whole input RID range */
+    build_append_int_noprefix(table_data, input_base, 4); /* Input base */
+    build_append_int_noprefix(table_data, id_count, 4); /* Number of IDs */
+    build_append_int_noprefix(table_data, input_base, 4); /* Output base */
+    build_append_int_noprefix(table_data, out_ref, 4); /* Output Reference */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+}
+
+struct AcpiIortIdMapping {
+    uint32_t input_base;
+    uint32_t id_count;
+};
+typedef struct AcpiIortIdMapping AcpiIortIdMapping;
+
 /* Build the iort ID mapping to SMMUv3 for a given PCI host bridge */
 static int
 iort_host_bridges(Object *obj, void *opaque)

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 307

Quoted 10 lines
hw/arm/virt-acpi-build.c +1 -5
@@ -281,18 +303,17 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
 static void
 build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    int i, nb_nodes, rc_mapping_count;
-    AcpiIortIdMapping *idmap;
-    AcpiIortItsGroup *its;
-    AcpiIortSmmu3 *smmu;
-    AcpiIortRC *rc;
+    int i, rc_mapping_count;
     const uint32_t iort_node_offset = 48;  

can be replaced by IORT_NODE_OFFSET now

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 316

Quoted 9 lines
hw/arm/virt-acpi-build.c +3 -0
     size_t node_size, smmu_offset = 0;
+    AcpiIortIdMapping *idmap;
     GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
     GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
 
     AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
                         .oem_table_id = vms->oem_table_id };
+    /* Table 2 The IORT */
+    acpi_table_begin(&table, table_data);  

nit: you could have done this move in previous patch.

Quoted 6 lines
hw/arm/virt-acpi-build.c +0 -0
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
 
@@ -325,106 +346,100 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
             g_array_append_val(its_idmaps, next_range);
         }

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 355

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -2
 
-        nb_nodes = 3; /* RC, ITS, SMMUv3 */
         rc_mapping_count = smmu_idmaps->len + its_idmaps->len;
+        /* Number of IORT Nodes */
+        build_append_int_noprefix(table_data, 3 /* RC, ITS, SMMUv3 */, 4);
     } else {
-        nb_nodes = 2; /* RC, ITS */
         rc_mapping_count = 1;
+        /* Number of IORT Nodes */
+        build_append_int_noprefix(table_data, 2 /* RC, ITS */, 4);  

I think I would prefer to keep the nb_nodes variable and do the corresponding build_append_int_noprefix only once. There may be additional nodes added with increased complexity and potential extra duplication.

Quoted 69 lines
hw/arm/virt-acpi-build.c +24 -36
     }
 
-    /* Table 2 The IORT */
-    acpi_table_begin(&table, table_data);
-    /* Number of IORT Nodes */
-    build_append_int_noprefix(table_data, nb_nodes, 4);
     /* Offset to Array of IORT Nodes */
-    build_append_int_noprefix(table_data, iort_node_offset, 4);
+    build_append_int_noprefix(table_data, IORT_NODE_OFFSET, 4);
     build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
-    /* ITS group node */
-    node_size =  sizeof(*its) + sizeof(uint32_t);
-    its = acpi_data_push(table_data, node_size);
-
-    its->type = ACPI_IORT_NODE_ITS_GROUP;
-    its->length = cpu_to_le16(node_size);
-    its->its_count = cpu_to_le32(1);
-    its->identifiers[0] = 0; /* MADT translation_id */
+    /* 3.1.1.3 ITS group node */
+    build_append_int_noprefix(table_data, 0 /* ITS Group */, 1); /* Type */
+    node_size =  20 /* fixed header size */ + 4 /* 1 GIC ITS Identifier */;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4); /* Number of ID mappings */
+    build_append_int_noprefix(table_data, 0, 4); /* Reference to ID Array */
+    build_append_int_noprefix(table_data, 1, 4); /* Number of ITSs */
+    /* GIC ITS Identifier Array */
+    build_append_int_noprefix(table_data, 0 /* MADT translation_id */, 4);
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         int irq =  vms->irqmap[VIRT_SMMU] + ARM_SPI_BASE;
 
-        /* SMMUv3 node */
-        smmu_offset = iort_node_offset + node_size;
-        node_size = sizeof(*smmu) + sizeof(*idmap);
-        smmu = acpi_data_push(table_data, node_size);
-
-        smmu->type = ACPI_IORT_NODE_SMMU_V3;
-        smmu->length = cpu_to_le16(node_size);
-        smmu->mapping_count = cpu_to_le32(1);
-        smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
-        smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
-        smmu->flags = cpu_to_le32(ACPI_IORT_SMMU_V3_COHACC_OVERRIDE);
-        smmu->event_gsiv = cpu_to_le32(irq);
-        smmu->pri_gsiv = cpu_to_le32(irq + 1);
-        smmu->sync_gsiv = cpu_to_le32(irq + 2);
-        smmu->gerr_gsiv = cpu_to_le32(irq + 3);
-
-        /* Identity RID mapping covering the whole input RID range */
-        idmap = &smmu->id_mapping_array[0];
-        idmap->input_base = 0;
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = 0;
-        /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        smmu_offset = table_data->len - table.table_offset;
+        /* 3.1.1.2 SMMUv3 */
+        build_append_int_noprefix(table_data, 4 /* SMMUv3 */, 1); /* Type */
+        node_size =  SMMU_V3_ENTRY_SIZE + ID_MAPPING_ENTRY_SIZE;
+        build_append_int_noprefix(table_data, node_size, 2); /* Length */
+        build_append_int_noprefix(table_data, 0, 1); /* Revision */
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 1, 4); /* Number of ID mappings */
+        /* Reference to ID Array */
+        build_append_int_noprefix(table_data, SMMU_V3_ENTRY_SIZE, 4);
+        /* Base address */
+        build_append_int_noprefix(table_data, vms->memmap[VIRT_SMMU].base, 8);

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 398

Quoted 10 lines
hw/arm/virt-acpi-build.c +10 -0
+        /* Flags */
+        build_append_int_noprefix(table_data, 1 /* COHACC OverrideNote */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 0, 8); /* VATOS address */
+        /* Model */
+        build_append_int_noprefix(table_data, 0 /* Generic SMMU-v3 */, 4);
+        build_append_int_noprefix(table_data, irq, 4); /* Event */
+        build_append_int_noprefix(table_data, irq + 1, 4); /* PRI */
+        build_append_int_noprefix(table_data, irq + 3, 4); /* GERR */
+        build_append_int_noprefix(table_data, irq + 2, 4); /* Sync */  

Please keep that comment. I think it helps
       /* output IORT node is the ITS group node (the first node) */

Quoted 15 lines
hw/arm/virt-acpi-build.c +4 -9
+
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
-    /* Root Complex Node */
-    node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
-    rc = acpi_data_push(table_data, node_size);
-
-    rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
-    rc->length = cpu_to_le16(node_size);
-    rc->mapping_count = cpu_to_le32(rc_mapping_count);
-    rc->mapping_offset = cpu_to_le32(sizeof(*rc));
-
+    /* Table 16 Root Complex Node */
+    build_append_int_noprefix(table_data, 2 /* Root complex */, 1); /* Type */

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 414

Quoted 10 lines
hw/arm/virt-acpi-build.c +9 -0
+    node_size =  ROOT_COMPLEX_ENTRY_SIZE +
+                 ID_MAPPING_ENTRY_SIZE * rc_mapping_count;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    /* Number of ID mappings */
+    build_append_int_noprefix(table_data, rc_mapping_count, 4);
+    /* Reference to ID Array */
+    build_append_int_noprefix(table_data, ROOT_COMPLEX_ENTRY_SIZE, 4);
     /* fully coherent device */  

this comment should become /* Memory access properties */ for homogenity

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 418

Quoted 8 lines
hw/arm/virt-acpi-build.c +4 -4
-    rc->memory_properties.cache_coherency = cpu_to_le32(1);
-    rc->memory_properties.memory_flags = 0x3; /* CCA = CPM = DCAS = 1 */
-    rc->pci_segment_number = 0; /* MCFG pci_segment */
-
+    build_append_int_noprefix(table_data,
+        1 | /* CCA: Cache Coherent Attribute, The device is fully coherent */
+        (3ULL << 7 * 8) /* MAF: Memory Access Flags, CCA = CPM = DCAS = 1 */,
+        8);  
Quoted 3 lines

I think we would gain in readability if we were to split into multiple

build_append_int_noprefix according to Table 13 fields

in spec I've got it's "Table 14: Memory access properties" Do you have any preference which spec/rev/ we should use for IORT?

Quoted 54 lines
Quoted 9 lines
hw/arm/virt-acpi-build.c +5 -0
+    build_append_int_noprefix(table_data, 0, 4); /* ATS Attribute */
+    /* MCFG pci_segment */
+    build_append_int_noprefix(table_data, 0, 4); /* PCI Segment number */
+
+    /* Output Reference */
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         AcpiIortIdMapping *range;
 

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 406

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
         /* translated RIDs connect to SMMUv3 node: RC -> SMMUv3 -> ITS */
         for (i = 0; i < smmu_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[i];
             range = &g_array_index(smmu_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
-            /* output IORT node is the smmuv3 node */
-            idmap->output_reference = cpu_to_le32(smmu_offset);  

please keep the original comment

Quoted 4 lines
hw/arm/virt-acpi-build.c +2 -0
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, smmu_offset);
         }
 

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 418

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
         /* bypassed RIDs connect to ITS group node directly: RC -> ITS */
         for (i = 0; i < its_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[smmu_idmaps->len + i];
             range = &g_array_index(its_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
-            /* output IORT node is the ITS group node (the first node) */
-            idmap->output_reference = cpu_to_le32(iort_node_offset);  

same, at least it helps me ;-)

Quoted 5 lines
hw/arm/virt-acpi-build.c +2 -1
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, iort_node_offset);
         }
     } else {
-        /* Identity RID mapping covering the whole input RID range */

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 445

Quoted 10 lines
hw/arm/virt-acpi-build.c +1 -5
-        idmap = &rc->id_mapping_array[0];
-        idmap->input_base = cpu_to_le32(0);
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = cpu_to_le32(0);
         /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
     acpi_table_end(linker, &table);  

Thanks

Eric

#66 lore raw

Re: [PATCH v3 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

Hi Igor,

Quoted 293 lines · Igor Mammedov

On Wed, 22 Sep 2021 15:26:49 +0200
Eric Auger <[email protected]> wrote:

I'll fix patch up as suggested,
though there is a question, see below

Quoted 287 lines · Igor Mammedov
Quoted 130 lines

---
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ---------------
 hw/arm/virt-acpi-build.c    | 167 ++++++++++++++++++++----------------
 2 files changed, 91 insertions(+), 147 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +22 -0
index bceb1b3b7e..4c682e7b09 100644
@@ -240,6 +240,28 @@ static void acpi_dsdt_add_tpm(Aml *scope, VirtMachineState *vms)
 }
 #endif
 
+#define ID_MAPPING_ENTRY_SIZE 20
+#define SMMU_V3_ENTRY_SIZE 60
+#define ROOT_COMPLEX_ENTRY_SIZE 32
+#define IORT_NODE_OFFSET 48
+
+static void build_iort_id_mapping(GArray *table_data, uint32_t input_base,
+                                  uint32_t id_count, uint32_t out_ref)
+{
+    /* Identity RID mapping covering the whole input RID range */
+    build_append_int_noprefix(table_data, input_base, 4); /* Input base */
+    build_append_int_noprefix(table_data, id_count, 4); /* Number of IDs */
+    build_append_int_noprefix(table_data, input_base, 4); /* Output base */
+    build_append_int_noprefix(table_data, out_ref, 4); /* Output Reference */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+}
+
+struct AcpiIortIdMapping {
+    uint32_t input_base;
+    uint32_t id_count;
+};
+typedef struct AcpiIortIdMapping AcpiIortIdMapping;
+
 /* Build the iort ID mapping to SMMUv3 for a given PCI host bridge */
 static int
 iort_host_bridges(Object *obj, void *opaque)

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 307

Quoted 10 lines
hw/arm/virt-acpi-build.c +1 -5
@@ -281,18 +303,17 @@ static int iort_idmap_compare(gconstpointer a, gconstpointer b)
 static void
 build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    int i, nb_nodes, rc_mapping_count;
-    AcpiIortIdMapping *idmap;
-    AcpiIortItsGroup *its;
-    AcpiIortSmmu3 *smmu;
-    AcpiIortRC *rc;
+    int i, rc_mapping_count;
     const uint32_t iort_node_offset = 48;  

can be replaced by IORT_NODE_OFFSET now

hw/arm/virt-acpi-build.c static int iort_idmap_compare(gconstpointer a, gconstpointer b) · line 316

Quoted 9 lines
hw/arm/virt-acpi-build.c +3 -0
     size_t node_size, smmu_offset = 0;
+    AcpiIortIdMapping *idmap;
     GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
     GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
 
     AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
                         .oem_table_id = vms->oem_table_id };
+    /* Table 2 The IORT */
+    acpi_table_begin(&table, table_data);  

nit: you could have done this move in previous patch.

Quoted 6 lines
hw/arm/virt-acpi-build.c +0 -0
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
 
@@ -325,106 +346,100 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
             g_array_append_val(its_idmaps, next_range);
         }

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 355

Quoted 10 lines
hw/arm/virt-acpi-build.c +4 -2
 
-        nb_nodes = 3; /* RC, ITS, SMMUv3 */
         rc_mapping_count = smmu_idmaps->len + its_idmaps->len;
+        /* Number of IORT Nodes */
+        build_append_int_noprefix(table_data, 3 /* RC, ITS, SMMUv3 */, 4);
     } else {
-        nb_nodes = 2; /* RC, ITS */
         rc_mapping_count = 1;
+        /* Number of IORT Nodes */
+        build_append_int_noprefix(table_data, 2 /* RC, ITS */, 4);  

I think I would prefer to keep the nb_nodes variable and do the corresponding build_append_int_noprefix only once. There may be additional nodes added with increased complexity and potential extra duplication.

Quoted 69 lines
hw/arm/virt-acpi-build.c +24 -36
     }
 
-    /* Table 2 The IORT */
-    acpi_table_begin(&table, table_data);
-    /* Number of IORT Nodes */
-    build_append_int_noprefix(table_data, nb_nodes, 4);
     /* Offset to Array of IORT Nodes */
-    build_append_int_noprefix(table_data, iort_node_offset, 4);
+    build_append_int_noprefix(table_data, IORT_NODE_OFFSET, 4);
     build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
-    /* ITS group node */
-    node_size =  sizeof(*its) + sizeof(uint32_t);
-    its = acpi_data_push(table_data, node_size);
-
-    its->type = ACPI_IORT_NODE_ITS_GROUP;
-    its->length = cpu_to_le16(node_size);
-    its->its_count = cpu_to_le32(1);
-    its->identifiers[0] = 0; /* MADT translation_id */
+    /* 3.1.1.3 ITS group node */
+    build_append_int_noprefix(table_data, 0 /* ITS Group */, 1); /* Type */
+    node_size =  20 /* fixed header size */ + 4 /* 1 GIC ITS Identifier */;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4); /* Number of ID mappings */
+    build_append_int_noprefix(table_data, 0, 4); /* Reference to ID Array */
+    build_append_int_noprefix(table_data, 1, 4); /* Number of ITSs */
+    /* GIC ITS Identifier Array */
+    build_append_int_noprefix(table_data, 0 /* MADT translation_id */, 4);
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         int irq =  vms->irqmap[VIRT_SMMU] + ARM_SPI_BASE;
 
-        /* SMMUv3 node */
-        smmu_offset = iort_node_offset + node_size;
-        node_size = sizeof(*smmu) + sizeof(*idmap);
-        smmu = acpi_data_push(table_data, node_size);
-
-        smmu->type = ACPI_IORT_NODE_SMMU_V3;
-        smmu->length = cpu_to_le16(node_size);
-        smmu->mapping_count = cpu_to_le32(1);
-        smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
-        smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
-        smmu->flags = cpu_to_le32(ACPI_IORT_SMMU_V3_COHACC_OVERRIDE);
-        smmu->event_gsiv = cpu_to_le32(irq);
-        smmu->pri_gsiv = cpu_to_le32(irq + 1);
-        smmu->sync_gsiv = cpu_to_le32(irq + 2);
-        smmu->gerr_gsiv = cpu_to_le32(irq + 3);
-
-        /* Identity RID mapping covering the whole input RID range */
-        idmap = &smmu->id_mapping_array[0];
-        idmap->input_base = 0;
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = 0;
-        /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        smmu_offset = table_data->len - table.table_offset;
+        /* 3.1.1.2 SMMUv3 */
+        build_append_int_noprefix(table_data, 4 /* SMMUv3 */, 1); /* Type */
+        node_size =  SMMU_V3_ENTRY_SIZE + ID_MAPPING_ENTRY_SIZE;
+        build_append_int_noprefix(table_data, node_size, 2); /* Length */
+        build_append_int_noprefix(table_data, 0, 1); /* Revision */
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 1, 4); /* Number of ID mappings */
+        /* Reference to ID Array */
+        build_append_int_noprefix(table_data, SMMU_V3_ENTRY_SIZE, 4);
+        /* Base address */
+        build_append_int_noprefix(table_data, vms->memmap[VIRT_SMMU].base, 8);

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 398

Quoted 10 lines
hw/arm/virt-acpi-build.c +10 -0
+        /* Flags */
+        build_append_int_noprefix(table_data, 1 /* COHACC OverrideNote */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 0, 8); /* VATOS address */
+        /* Model */
+        build_append_int_noprefix(table_data, 0 /* Generic SMMU-v3 */, 4);
+        build_append_int_noprefix(table_data, irq, 4); /* Event */
+        build_append_int_noprefix(table_data, irq + 1, 4); /* PRI */
+        build_append_int_noprefix(table_data, irq + 3, 4); /* GERR */
+        build_append_int_noprefix(table_data, irq + 2, 4); /* Sync */  

Please keep that comment. I think it helps
       /* output IORT node is the ITS group node (the first node) */

Quoted 15 lines
hw/arm/virt-acpi-build.c +4 -9
+
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
-    /* Root Complex Node */
-    node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
-    rc = acpi_data_push(table_data, node_size);
-
-    rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
-    rc->length = cpu_to_le16(node_size);
-    rc->mapping_count = cpu_to_le32(rc_mapping_count);
-    rc->mapping_offset = cpu_to_le32(sizeof(*rc));
-
+    /* Table 16 Root Complex Node */
+    build_append_int_noprefix(table_data, 2 /* Root complex */, 1); /* Type */

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 414

Quoted 10 lines
hw/arm/virt-acpi-build.c +9 -0
+    node_size =  ROOT_COMPLEX_ENTRY_SIZE +
+                 ID_MAPPING_ENTRY_SIZE * rc_mapping_count;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    /* Number of ID mappings */
+    build_append_int_noprefix(table_data, rc_mapping_count, 4);
+    /* Reference to ID Array */
+    build_append_int_noprefix(table_data, ROOT_COMPLEX_ENTRY_SIZE, 4);
     /* fully coherent device */  

this comment should become /* Memory access properties */ for homogenity

Quoted 8 lines
hw/arm/virt-acpi-build.c +4 -4
-    rc->memory_properties.cache_coherency = cpu_to_le32(1);
-    rc->memory_properties.memory_flags = 0x3; /* CCA = CPM = DCAS = 1 */
-    rc->pci_segment_number = 0; /* MCFG pci_segment */
-
+    build_append_int_noprefix(table_data,
+        1 | /* CCA: Cache Coherent Attribute, The device is fully coherent */
+        (3ULL << 7 * 8) /* MAF: Memory Access Flags, CCA = CPM = DCAS = 1 */,
+        8);  
Quoted 5 lines
Quoted 3 lines

I think we would gain in readability if we were to split into multiple

build_append_int_noprefix according to Table 13 fields

in spec I've got it's "Table 14: Memory access properties" Do you have any preference which spec/rev/ we should use for IORT?

I looked at Document number: ARM DEN 0049B
as said in the comment Document number: ARM DEN 0049B, October 2015 Found
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwjD3q_E0JLzAhVtgP0HHRuxDtYQFnoECAIQAQ&url=https%3A%2F%2Fdocumentation-service.arm.com%2Fstatic%2F5f8eb168f86e16515cdbe414%3Ftoken%3D&usg=AOvVaw1tQQk9lJwojw_hM6ZJUbat

Table 13 Memory access properties Thanks Eric

Quoted 54 lines
Quoted 54 lines
Quoted 9 lines
hw/arm/virt-acpi-build.c +5 -0
+    build_append_int_noprefix(table_data, 0, 4); /* ATS Attribute */
+    /* MCFG pci_segment */
+    build_append_int_noprefix(table_data, 0, 4); /* PCI Segment number */
+
+    /* Output Reference */
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         AcpiIortIdMapping *range;
 

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 406

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
         /* translated RIDs connect to SMMUv3 node: RC -> SMMUv3 -> ITS */
         for (i = 0; i < smmu_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[i];
             range = &g_array_index(smmu_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
-            /* output IORT node is the smmuv3 node */
-            idmap->output_reference = cpu_to_le32(smmu_offset);  

please keep the original comment

Quoted 4 lines
hw/arm/virt-acpi-build.c +2 -0
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, smmu_offset);
         }
 

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 418

Quoted 10 lines
hw/arm/virt-acpi-build.c +0 -7
         /* bypassed RIDs connect to ITS group node directly: RC -> ITS */
         for (i = 0; i < its_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[smmu_idmaps->len + i];
             range = &g_array_index(its_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
-            /* output IORT node is the ITS group node (the first node) */
-            idmap->output_reference = cpu_to_le32(iort_node_offset);  

same, at least it helps me ;-)

Quoted 5 lines
hw/arm/virt-acpi-build.c +2 -1
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, iort_node_offset);
         }
     } else {
-        /* Identity RID mapping covering the whole input RID range */

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 445

Quoted 10 lines
hw/arm/virt-acpi-build.c +1 -5
-        idmap = &rc->id_mapping_array[0];
-        idmap->input_base = cpu_to_le32(0);
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = cpu_to_le32(0);
         /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
     acpi_table_end(linker, &table);  

Thanks

Eric

#67 lore raw

PATCH v4 29/35 acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

Drop usage of packed structures and explicit endian conversions when building IORT table use endian agnostic build_append_int_noprefix() API to build it.

---
CC: Eric Auger <[email protected]>

v4:
- (Eric Auger <[email protected]>)
* keep nb_nodes
* encode 'Memory access properties' as separate entries according to Table 13
* keep some comments
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ----------------
 hw/arm/virt-acpi-build.c    | 164 ++++++++++++++++++++----------------
 2 files changed, 93 insertions(+), 142 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +93 -71

216 lines not on this page · raw message

Signature · 1 line
2.27.0
#68 lore raw

PATCH v3 30/35 acpi: arm/virt: build_spcr: fix invalid cast

In reply to Igor Mammedov

implicit cast to structure uint8_t member didn't raise error when assigning value from incorrect enum, but when using build_append_gas() (next patch) it will error out with (clang):
implicit conversion from enumeration type 'AmlRegionSpace' to different enumeration type 'AmlAddressSpace'
fix cast error by using correct AML_AS_SYSTEM_MEMORY enum

---
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 hw/arm/virt-acpi-build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/arm/virt-acpi-build.c +1 -1
index 4c682e7b09..50ed73b9d0 100644
@@ -459,7 +459,7 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 
     spcr->interface_type = 0x3;    /* ARM PL011 UART */
 
-    spcr->base_address.space_id = AML_SYSTEM_MEMORY;
+    spcr->base_address.space_id = AML_AS_SYSTEM_MEMORY;
     spcr->base_address.bit_width = 8;
     spcr->base_address.bit_offset = 0;
     spcr->base_address.access_width = 1;
Signature · 1 line
2.27.0
#69 lore raw

PATCH v3 31/35 acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic build_append_FOO() API.

PS:
Spec is Microsoft hosted, however 1.02 is no where to be found (MS lists only the current revision) and the current revision is 1.07, so bring comments in line with 1.07 as this is the only available spec. There is no content change between originally implemented 1.02 (using QEMU code as reference) and 1.07. The only change is renaming 'Reserved2' field to 'Language', with the same 0 value.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

PS:
perhaps we should cache MS hosted specs in QEMU tree, given they do not maintain old revisions.

---
 include/hw/acpi/acpi-defs.h | 32 -----------------
 hw/arm/virt-acpi-build.c    | 68 ++++++++++++++++++++++---------------
 2 files changed, 41 insertions(+), 59 deletions(-)
include/hw/acpi/acpi-defs.h +0 -32
index 6f2f08a9de..012c4ffb3a 100644
@@ -117,38 +117,6 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * Serial Port Console Redirection Table (SPCR), Rev. 1.02
- *
- * For .interface_type see Debug Port Table 2 (DBG2) serial port
- * subtypes in Table 3, Rev. May 22, 2012
- */
-struct AcpiSerialPortConsoleRedirection {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t  interface_type;
-    uint8_t  reserved1[3];
-    struct AcpiGenericAddress base_address;
-    uint8_t  interrupt_types;
-    uint8_t  irq;
-    uint32_t gsi;
-    uint8_t  baud;
-    uint8_t  parity;
-    uint8_t  stopbits;
-    uint8_t  flowctrl;
-    uint8_t  term_type;
-    uint8_t  reserved2;
-    uint16_t pci_device_id;
-    uint16_t pci_vendor_id;
-    uint8_t  pci_bus;
-    uint8_t  pci_slot;
-    uint8_t  pci_func;
-    uint32_t pci_flags;
-    uint8_t  pci_seg;
-    uint32_t reserved3;
-} QEMU_PACKED;
-typedef struct AcpiSerialPortConsoleRedirection
-               AcpiSerialPortConsoleRedirection;
-
 /*
  * ACPI 1.0 Firmware ACPI Control Structure (FACS)
  */
hw/arm/virt-acpi-build.c +41 -27

80 lines not on this page · raw message

Signature · 1 line
2.27.0
#70 lore raw

PATCH v3 32/35 acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic build_append_FOO() API.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 25 -------------
 hw/arm/virt-acpi-build.c    | 75 ++++++++++++++++++++++++-------------
 2 files changed, 48 insertions(+), 52 deletions(-)
include/hw/acpi/acpi-defs.h +0 -25
index 012c4ffb3a..0b375e7589 100644
@@ -131,29 +131,4 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/*
- * Generic Timer Description Table (GTDT)
- */
-#define ACPI_GTDT_INTERRUPT_MODE_LEVEL    (0 << 0)
-#define ACPI_GTDT_INTERRUPT_MODE_EDGE     (1 << 0)
-#define ACPI_GTDT_CAP_ALWAYS_ON           (1 << 2)
-
-struct AcpiGenericTimerTable {
-    ACPI_TABLE_HEADER_DEF
-    uint64_t counter_block_addresss;
-    uint32_t reserved;
-    uint32_t secure_el1_interrupt;
-    uint32_t secure_el1_flags;
-    uint32_t non_secure_el1_interrupt;
-    uint32_t non_secure_el1_flags;
-    uint32_t virtual_timer_interrupt;
-    uint32_t virtual_timer_flags;
-    uint32_t non_secure_el2_interrupt;
-    uint32_t non_secure_el2_flags;
-    uint64_t counter_read_block_address;
-    uint32_t platform_timer_count;
-    uint32_t platform_timer_offset;
-} QEMU_PACKED;
-typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
-
 #endif
hw/arm/virt-acpi-build.c +48 -27

88 lines not on this page · raw message

Signature · 1 line
2.27.0
#71 lore raw

PATCH v3 33/35 acpi: build_facs: use build_append_int_noprefix() API to compose table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building table and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 include/hw/acpi/aml-build.h |  1 +
 hw/acpi/aml-build.c         |  2 +-
 hw/i386/acpi-build.c        | 18 ++++++++++++++----
 4 files changed, 16 insertions(+), 19 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 0b375e7589..1a0774edd6 100644
@@ -117,18 +117,4 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * ACPI 1.0 Firmware ACPI Control Structure (FACS)
- */
-struct AcpiFacsDescriptorRev1 {
-    uint32_t signature;           /* ACPI Signature */
-    uint32_t length;                 /* Length of structure, in bytes */
-    uint32_t hardware_signature;     /* Hardware configuration signature */
-    uint32_t firmware_waking_vector; /* ACPI OS waking vector */
-    uint32_t global_lock;            /* Global Lock */
-    uint32_t flags;
-    uint8_t  resverved3 [40];        /* Reserved - must be zero */
-} QEMU_PACKED;
-typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
-
 #endif
include/hw/acpi/aml-build.h +1 -0
index 6e1f42e119..6f3d1de1b1 100644
@@ -413,6 +413,7 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
 Aml *aml_object_type(Aml *object);
 
 void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+void build_append_byte(GArray *array, uint8_t val);
 
 typedef struct AcpiTable {
     const char *sig;
hw/acpi/aml-build.c +1 -1
index 050fdb3f37..4135b385e5 100644
@@ -47,7 +47,7 @@ static void build_prepend_byte(GArray *array, uint8_t val)
     g_array_prepend_val(array, val);
 }
 
-static void build_append_byte(GArray *array, uint8_t val)
+void build_append_byte(GArray *array, uint8_t val)
 {
     g_array_append_val(array, val);
 }
hw/i386/acpi-build.c +14 -4
index 9f888d5a2c..547cd4ed9d 100644
@@ -345,13 +345,23 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
-/* FACS */
+/*
+ * ACPI spec 1.0b,
+ * 5.2.6 Firmware ACPI Control Structure
+ */
 static void
 build_facs(GArray *table_data)
 {
-    AcpiFacsDescriptorRev1 *facs = acpi_data_push(table_data, sizeof *facs);
-    memcpy(&facs->signature, "FACS", 4);
-    facs->length = cpu_to_le32(sizeof(*facs));
+    const char *sig = "FACS";
+    const uint8_t reserved[40] = {};
+
+    g_array_append_vals(table_data, sig, 4); /* Signature */
+    build_append_int_noprefix(table_data, 64, 4); /* Length */
+    build_append_int_noprefix(table_data, 0, 4); /* Hardware Signature */
+    build_append_int_noprefix(table_data, 0, 4); /* Firmware Waking Vector */
+    build_append_int_noprefix(table_data, 0, 4); /* Global Lock */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+    g_array_append_vals(table_data, reserved, 40); /* Reserved */
 }
 
 static void build_append_pcihp_notify_entry(Aml *method, int slot)
Signature · 1 line
2.27.0
Reviewed-by on v3 33/35
#72 lore raw

Re: [PATCH v3 33/35] acpi: build_facs: use build_append_int_noprefix() API to compose table

Quoted 42 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building table and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 include/hw/acpi/aml-build.h |  1 +
 hw/acpi/aml-build.c         |  2 +-
 hw/i386/acpi-build.c        | 18 ++++++++++++++----
 4 files changed, 16 insertions(+), 19 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 0b375e7589..1a0774edd6 100644
@@ -117,18 +117,4 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * ACPI 1.0 Firmware ACPI Control Structure (FACS)
- */
-struct AcpiFacsDescriptorRev1 {
-    uint32_t signature;           /* ACPI Signature */
-    uint32_t length;                 /* Length of structure, in bytes */
-    uint32_t hardware_signature;     /* Hardware configuration signature */
-    uint32_t firmware_waking_vector; /* ACPI OS waking vector */
-    uint32_t global_lock;            /* Global Lock */
-    uint32_t flags;
-    uint8_t  resverved3 [40];        /* Reserved - must be zero */
-} QEMU_PACKED;
-typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
-
 #endif
include/hw/acpi/aml-build.h +0 -0
index 6e1f42e119..6f3d1de1b1 100644

include/hw/acpi/aml-build.h Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target); · line 416

Quoted 4 lines
include/hw/acpi/aml-build.h +1 -0
@@ -413,6 +413,7 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
 Aml *aml_object_type(Aml *object);
 
 void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+void build_append_byte(GArray *array, uint8_t val);

what's the rationale behind changes related to build_append_byte?

Quoted 39 lines
include/hw/acpi/aml-build.h +0 -0
 typedef struct AcpiTable {
     const char *sig;
hw/acpi/aml-build.c +1 -1
index 050fdb3f37..4135b385e5 100644
@@ -47,7 +47,7 @@ static void build_prepend_byte(GArray *array, uint8_t val)
     g_array_prepend_val(array, val);
 }
 
-static void build_append_byte(GArray *array, uint8_t val)
+void build_append_byte(GArray *array, uint8_t val)
 {
     g_array_append_val(array, val);
 }
hw/i386/acpi-build.c +7 -4
index 9f888d5a2c..547cd4ed9d 100644
@@ -345,13 +345,23 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
-/* FACS */
+/*
+ * ACPI spec 1.0b,
+ * 5.2.6 Firmware ACPI Control Structure
+ */
 static void
 build_facs(GArray *table_data)
 {
-    AcpiFacsDescriptorRev1 *facs = acpi_data_push(table_data, sizeof *facs);
-    memcpy(&facs->signature, "FACS", 4);
-    facs->length = cpu_to_le32(sizeof(*facs));
+    const char *sig = "FACS";
+    const uint8_t reserved[40] = {};
+

hw/i386/acpi-build.c static void acpi_align_size(GArray *blob, unsigned align) · line 367

Quoted 10 lines
hw/i386/acpi-build.c +7 -0
+    g_array_append_vals(table_data, sig, 4); /* Signature */
+    build_append_int_noprefix(table_data, 64, 4); /* Length */
+    build_append_int_noprefix(table_data, 0, 4); /* Hardware Signature */
+    build_append_int_noprefix(table_data, 0, 4); /* Firmware Waking Vector */
+    build_append_int_noprefix(table_data, 0, 4); /* Global Lock */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+    g_array_append_vals(table_data, reserved, 40); /* Reserved */
 }
 
 static void build_append_pcihp_notify_entry(Aml *method, int slot)

Without thoses changes

#73 lore raw

Re: [PATCH v3 33/35] acpi: build_facs: use build_append_int_noprefix() API to compose table

Quoted 45 lines · On Wed, 22 Sep 2021 15:33:27 +0200 Eric Auger <[email protected]> wrote:
Quoted 44 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building table and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 include/hw/acpi/aml-build.h |  1 +
 hw/acpi/aml-build.c         |  2 +-
 hw/i386/acpi-build.c        | 18 ++++++++++++++----
 4 files changed, 16 insertions(+), 19 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 0b375e7589..1a0774edd6 100644
@@ -117,18 +117,4 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * ACPI 1.0 Firmware ACPI Control Structure (FACS)
- */
-struct AcpiFacsDescriptorRev1 {
-    uint32_t signature;           /* ACPI Signature */
-    uint32_t length;                 /* Length of structure, in bytes */
-    uint32_t hardware_signature;     /* Hardware configuration signature */
-    uint32_t firmware_waking_vector; /* ACPI OS waking vector */
-    uint32_t global_lock;            /* Global Lock */
-    uint32_t flags;
-    uint8_t  resverved3 [40];        /* Reserved - must be zero */
-} QEMU_PACKED;
-typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
-
 #endif
include/hw/acpi/aml-build.h +0 -0
index 6e1f42e119..6f3d1de1b1 100644
@@ -413,6 +413,7 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
 Aml *aml_object_type(Aml *object);
 
Quoted 3 lines

include/hw/acpi/aml-build.h Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target); · line 416

Quoted 2 lines
include/hw/acpi/aml-build.h +1 -0
 void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+void build_append_byte(GArray *array, uint8_t val);  

what's the rationale behind changes related to build_append_byte?

looks like stray remnants from previous revisions, not really needed. I'll drop it.

Quoted 53 lines
Quoted 39 lines
include/hw/acpi/aml-build.h +0 -0
 typedef struct AcpiTable {
     const char *sig;
hw/acpi/aml-build.c +1 -1
index 050fdb3f37..4135b385e5 100644
@@ -47,7 +47,7 @@ static void build_prepend_byte(GArray *array, uint8_t val)
     g_array_prepend_val(array, val);
 }
 
-static void build_append_byte(GArray *array, uint8_t val)
+void build_append_byte(GArray *array, uint8_t val)
 {
     g_array_append_val(array, val);
 }
hw/i386/acpi-build.c +7 -4
index 9f888d5a2c..547cd4ed9d 100644
@@ -345,13 +345,23 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
-/* FACS */
+/*
+ * ACPI spec 1.0b,
+ * 5.2.6 Firmware ACPI Control Structure
+ */
 static void
 build_facs(GArray *table_data)
 {
-    AcpiFacsDescriptorRev1 *facs = acpi_data_push(table_data, sizeof *facs);
-    memcpy(&facs->signature, "FACS", 4);
-    facs->length = cpu_to_le32(sizeof(*facs));
+    const char *sig = "FACS";
+    const uint8_t reserved[40] = {};
+

hw/i386/acpi-build.c static void acpi_align_size(GArray *blob, unsigned align) · line 367

Quoted 10 lines
hw/i386/acpi-build.c +7 -0
+    g_array_append_vals(table_data, sig, 4); /* Signature */
+    build_append_int_noprefix(table_data, 64, 4); /* Length */
+    build_append_int_noprefix(table_data, 0, 4); /* Hardware Signature */
+    build_append_int_noprefix(table_data, 0, 4); /* Firmware Waking Vector */
+    build_append_int_noprefix(table_data, 0, 4); /* Global Lock */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+    g_array_append_vals(table_data, reserved, 40); /* Reserved */
 }
 
 static void build_append_pcihp_notify_entry(Aml *method, int slot)

Without thoses changes

#74 lore raw

PATCH v3 34/35 acpi: remove no longer used build_header()

In reply to Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 25 -------------------------
 include/hw/acpi/aml-build.h |  4 ----
 hw/acpi/aml-build.c         | 23 -----------------------
 3 files changed, 52 deletions(-)
include/hw/acpi/acpi-defs.h +0 -25
index 1a0774edd6..ee733840aa 100644
@@ -48,31 +48,6 @@ typedef struct AcpiRsdpData {
     unsigned *xsdt_tbl_offset;
 } AcpiRsdpData;
 
-/* Table structure from Linux kernel (the ACPI tables are under the
-   BSD license) */
-
-
-#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
-    uint32_t signature;          /* ACPI signature (4 ASCII characters) */ \
-    uint32_t length;                 /* Length of table, in bytes, including header */ \
-    uint8_t  revision;               /* ACPI Specification minor version # */ \
-    uint8_t  checksum;               /* To make sum of entire table == 0 */ \
-    uint8_t  oem_id[6] \
-                 QEMU_NONSTRING;     /* OEM identification */ \
-    uint8_t  oem_table_id[8] \
-                 QEMU_NONSTRING;     /* OEM table identification */ \
-    uint32_t oem_revision;           /* OEM revision number */ \
-    uint8_t  asl_compiler_id[4] \
-                 QEMU_NONSTRING;     /* ASL compiler vendor ID */ \
-    uint32_t asl_compiler_revision;  /* ASL compiler revision number */
-
-
-/* ACPI common table header */
-struct AcpiTableHeader {
-    ACPI_TABLE_HEADER_DEF
-} QEMU_PACKED;
-typedef struct AcpiTableHeader AcpiTableHeader;
-
 struct AcpiGenericAddress {
     uint8_t space_id;        /* Address space where struct or register exists */
     uint8_t bit_width;       /* Size in bits of given register */
include/hw/acpi/aml-build.h +0 -4
index 6f3d1de1b1..b8272c239a 100644
@@ -445,10 +445,6 @@ void acpi_table_begin(AcpiTable *desc, GArray *array);
  */
 void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
 
-void
-build_header(BIOSLinker *linker, GArray *table_data,
-             AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
-             const char *oem_id, const char *oem_table_id);
 void *acpi_data_push(GArray *table_data, unsigned size);
 unsigned acpi_data_len(GArray *table);
 void acpi_add_table(GArray *table_offsets, GArray *table_data);
hw/acpi/aml-build.c +0 -23
index 4135b385e5..b261ecfbc1 100644
@@ -1754,29 +1754,6 @@ void acpi_table_end(BIOSLinker *linker, AcpiTable *desc)
         desc->table_offset, table_len, desc->table_offset + checksum_offset);
 }
 
-void
-build_header(BIOSLinker *linker, GArray *table_data,
-             AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
-             const char *oem_id, const char *oem_table_id)
-{
-    unsigned tbl_offset = (char *)h - table_data->data;
-    unsigned checksum_offset = (char *)&h->checksum - table_data->data;
-    memcpy(&h->signature, sig, 4);
-    h->length = cpu_to_le32(len);
-    h->revision = rev;
-
-    strpadcpy((char *)h->oem_id, sizeof h->oem_id, oem_id, ' ');
-    strpadcpy((char *)h->oem_table_id, sizeof h->oem_table_id,
-              oem_table_id, ' ');
-
-    h->oem_revision = cpu_to_le32(1);
-    memcpy(h->asl_compiler_id, ACPI_BUILD_APPNAME8, 4);
-    h->asl_compiler_revision = cpu_to_le32(1);
-    /* Checksum to be filled in by Guest linker */
-    bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
-        tbl_offset, len, checksum_offset);
-}
-
 void *acpi_data_push(GArray *table_data, unsigned size)
 {
     unsigned off = table_data->len;
Signature · 1 line
2.27.0
Reviewed-by on v3 34/35
#75 lore raw

Re: [PATCH v3 34/35] acpi: remove no longer used build_header()

Quoted 1 line · Igor Mammedov

Eric

Quoted 92 lines
---
 include/hw/acpi/acpi-defs.h | 25 -------------------------
 include/hw/acpi/aml-build.h |  4 ----
 hw/acpi/aml-build.c         | 23 -----------------------
 3 files changed, 52 deletions(-)
include/hw/acpi/acpi-defs.h +0 -25
index 1a0774edd6..ee733840aa 100644
@@ -48,31 +48,6 @@ typedef struct AcpiRsdpData {
     unsigned *xsdt_tbl_offset;
 } AcpiRsdpData;
 
-/* Table structure from Linux kernel (the ACPI tables are under the
-   BSD license) */
-
-
-#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
-    uint32_t signature;          /* ACPI signature (4 ASCII characters) */ \
-    uint32_t length;                 /* Length of table, in bytes, including header */ \
-    uint8_t  revision;               /* ACPI Specification minor version # */ \
-    uint8_t  checksum;               /* To make sum of entire table == 0 */ \
-    uint8_t  oem_id[6] \
-                 QEMU_NONSTRING;     /* OEM identification */ \
-    uint8_t  oem_table_id[8] \
-                 QEMU_NONSTRING;     /* OEM table identification */ \
-    uint32_t oem_revision;           /* OEM revision number */ \
-    uint8_t  asl_compiler_id[4] \
-                 QEMU_NONSTRING;     /* ASL compiler vendor ID */ \
-    uint32_t asl_compiler_revision;  /* ASL compiler revision number */
-
-
-/* ACPI common table header */
-struct AcpiTableHeader {
-    ACPI_TABLE_HEADER_DEF
-} QEMU_PACKED;
-typedef struct AcpiTableHeader AcpiTableHeader;
-
 struct AcpiGenericAddress {
     uint8_t space_id;        /* Address space where struct or register exists */
     uint8_t bit_width;       /* Size in bits of given register */
include/hw/acpi/aml-build.h +0 -4
index 6f3d1de1b1..b8272c239a 100644
@@ -445,10 +445,6 @@ void acpi_table_begin(AcpiTable *desc, GArray *array);
  */
 void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
 
-void
-build_header(BIOSLinker *linker, GArray *table_data,
-             AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
-             const char *oem_id, const char *oem_table_id);
 void *acpi_data_push(GArray *table_data, unsigned size);
 unsigned acpi_data_len(GArray *table);
 void acpi_add_table(GArray *table_offsets, GArray *table_data);
hw/acpi/aml-build.c +0 -23
index 4135b385e5..b261ecfbc1 100644
@@ -1754,29 +1754,6 @@ void acpi_table_end(BIOSLinker *linker, AcpiTable *desc)
         desc->table_offset, table_len, desc->table_offset + checksum_offset);
 }
 
-void
-build_header(BIOSLinker *linker, GArray *table_data,
-             AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
-             const char *oem_id, const char *oem_table_id)
-{
-    unsigned tbl_offset = (char *)h - table_data->data;
-    unsigned checksum_offset = (char *)&h->checksum - table_data->data;
-    memcpy(&h->signature, sig, 4);
-    h->length = cpu_to_le32(len);
-    h->revision = rev;
-
-    strpadcpy((char *)h->oem_id, sizeof h->oem_id, oem_id, ' ');
-    strpadcpy((char *)h->oem_table_id, sizeof h->oem_table_id,
-              oem_table_id, ' ');
-
-    h->oem_revision = cpu_to_le32(1);
-    memcpy(h->asl_compiler_id, ACPI_BUILD_APPNAME8, 4);
-    h->asl_compiler_revision = cpu_to_le32(1);
-    /* Checksum to be filled in by Guest linker */
-    bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
-        tbl_offset, len, checksum_offset);
-}
-
 void *acpi_data_push(GArray *table_data, unsigned size)
 {
     unsigned off = table_data->len;
#76 lore raw

PATCH v3 35/35 acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute

In reply to Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/acpi/acpi-defs.h +1 -1
index ee733840aa..c97e8633ad 100644
@@ -55,7 +55,7 @@ struct AcpiGenericAddress {
     uint8_t access_width;    /* ACPI 3.0: Minimum Access size (ACPI 3.0),
                                 ACPI 2.0: Reserved, Table 5-1 */
     uint64_t address;        /* 64-bit address of struct or register */
-} QEMU_PACKED;
+};
 
 typedef struct AcpiFadtData {
     struct AcpiGenericAddress pm1a_cnt;   /* PM1a_CNT_BLK */
Signature · 1 line
2.27.0
Reviewed-by on v3 35/35
#77 lore raw

Re: [PATCH v3 35/35] acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute

Quoted 1 line · Igor Mammedov

Eric

Quoted 18 lines
---
 include/hw/acpi/acpi-defs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/acpi/acpi-defs.h +1 -1
index ee733840aa..c97e8633ad 100644
@@ -55,7 +55,7 @@ struct AcpiGenericAddress {
     uint8_t access_width;    /* ACPI 3.0: Minimum Access size (ACPI 3.0),
                                 ACPI 2.0: Reserved, Table 5-1 */
     uint64_t address;        /* 64-bit address of struct or register */
-} QEMU_PACKED;
+};
 
 typedef struct AcpiFadtData {
     struct AcpiGenericAddress pm1a_cnt;   /* PM1a_CNT_BLK */
#78 lore raw
In reply to Igor Mammedov

On Tue, 7 Sep 2021 10:47:39 -0400
Igor Mammedov <[email protected]> wrote:

Michael,

there are some fixups accumulated (mostly doc/comment related or dropping some not related code movements),
I can respin series quickly with them incorporated or do fixups on top. Which one would you prefer?

Quoted 128 lines

v3:
1. s/acpi_init_table()|acpi_table_composed()/acpi_table_begin()|acpi_table_end()/
2. arm:madt fix incorrect length
3. various comment improvments
4. rewrite IORT conversion patch due to heavy conflicts with bypass iommu code merged recently
5 pick up Eric's Reviewed-By where there wasn't significant change (1)

v2:
- drop test related patches, they will be sent as a separate series
- fix bios_loader pointer initialization ordering when using TPM1.2
- extend commit message of [1/35] and add extra comment about table length patching

Highlights:
* drop pointer arithmetic in ACPI tables code
* use endian agnostic API
* simplifies review of tables. /in most cases just line by line comparision with spec/

Series replaces build_header() with acpi_table_begin()/acpi_table_end() API that hides pointer/offset arithmetic from user, to prevent errors caused by it [1].
While doing above, it was necessary to split table header from packed structure that was describing the table, which is counter-productive since it still leaves packed structure drawbacks. So that sort of forced me to rewrite tables that were composed with help of packed structures to preferred build_append_int_noprefix() API. In cases where refactoring to build_append_int_noprefix() was small, it was squashed with acpi_table_begin()/acpi_table_end() patch. Conversion reduced code size quite a bit despite me adding doc comments for every table row.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

Link to repo with this series and tests to validate it:
https://gitlab.com/imammedo/qemu/-/commits/acpi_build_header_refactoring_v3

Previous v2 revision can be found at:

   https://www.mail-archive.com/[email protected]/msg822151.html

Igor Mammedov (35):
acpi: add helper routines to initialize ACPI tables
acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: use build_append_int_noprefix() API to compose SRAT table
acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: x86: remove dead code
acpi: x86: set enabled when composing _MAT entries
acpi: x86: madt: use build_append_int_noprefix() API to compose MADT
table
acpi: arm/virt: madt: use build_append_int_noprefix() API to compose
MADT table
acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm/virt: convert build_iort() to endian agnostic
build_append_FOO() API
acpi: arm/virt: build_spcr: fix invalid cast
acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: build_facs: use build_append_int_noprefix() API to compose table
acpi: remove no longer used build_header()
acpi: AcpiGenericAddress no longer used to map/access fields of MMIO,
drop packed attribute

 include/hw/acpi/acpi-defs.h          | 528 +-----------------------
 include/hw/acpi/acpi_dev_interface.h |   3 +-
 include/hw/acpi/aml-build.h          |  38 +-
 include/hw/i386/pc.h                 |   6 +-
 hw/acpi/acpi-x86-stub.c              |   3 +-
 hw/acpi/aml-build.c                  | 197 +++++----
 hw/acpi/cpu.c                        |  17 +-
 hw/acpi/ghes.c                       |  10 +-
 hw/acpi/hmat.c                       |  14 +-
 hw/acpi/nvdimm.c                     |  64 ++-
 hw/acpi/pci.c                        |  18 +-
 hw/acpi/vmgenid.c                    |  16 +-
 hw/arm/virt-acpi-build.c             | 577 +++++++++++++++------------
 hw/i386/acpi-build.c                 | 304 +++++++-------
 hw/i386/acpi-common.c                | 158 ++++----
 hw/i386/acpi-microvm.c               |  13 +-
 16 files changed, 798 insertions(+), 1168 deletions(-)