Kernel 2.4.16-pa10
Hi all,
The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on 712) But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the screen and in background something like parasitical tv reception (white line scanning screen)... After some minutes it stop?
Thanks in advance for help,
Joel
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
Hi.
This invalid scan problem suggests to me that the box is putting out a resolution/frequency that the monitor cannot support. The banner in the muddle of the screen is a monitor on-screen-display error. I don't know about B180's but on my 712 this happened. In the boot loader firmware you should be able to select resolutions -- I booted it on another monitor, lovered the frequency and resolution, then switched back to the first monitor. So, i don't think that's a problem with the kernel, rather the settings of the box's STI and the limitations of the monitor you're using.
-phil
Quoted 18 lines · On Mon, 3 Dec 2001 [email protected] wrote:
Hi all,
The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on 712) But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the screen and in background something like parasitical tv reception (white line scanning screen)... After some minutes it stop?
Thanks in advance for help,
Joel-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
Signature · 8 lines
=============================================================================== Phil Anderson UNIX Systems Administrator [email protected] [email protected] "Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
Re: [parisc-linux] Kernel 2.4.16-pa10: sti console brokrn?
You have right, I forget to mentionned that the screen was an HP model A4575A with a selected resolution of 1280*1024 which works fine till now with previous kernel 2.4.9 and 2.4.14.
So what should be the right resolution?
Joel
Quoting Phil Anderson <[email protected]>:
Quoted 32 lines
Hi.
This invalid scan problem suggests to me that the box is putting out a resolution/frequency that the monitor cannot support. The banner in the muddle of the screen is a monitor on-screen-display error. I don't know about B180's but on my 712 this happened. In the boot loader firmware you
should be able to select resolutions -- I booted it on another monitor, lovered the frequency and resolution, then switched back to the first monitor. So, i don't think that's a problem with the kernel, rather the settings of the box's STI and the limitations of the monitor you're using.-phil
Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:
Hi all,
The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on
712)
Quoted 2 lines
But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the screenand in
Quoted 1 line
background something like parasitical tv reception (white line
scanning
Quoted 4 lines
screen)... After some minutes it stop?
Thanks in advance for help,
Joel
Quoted 21 lines
Quoted 8 lines
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linuxSignature · 8 lines
=============================================================================== Phil Anderson UNIX Systems Administrator [email protected] [email protected] "Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
[parisc-linux] 2.4.16-pa12 Power failled (was: 2.4.16-pa10: sti console broken?)
Hi all,
Sti consol is Ok now.
But receive on consol how many "POWERFAIL INTERRUPTION". I beleive it comes from scsi dirver sym53c8xx but not sure.
Thanks for all great job,
Joel
Quoting [email protected]:
Quoted 69 lines
You have right, I forget to mentionned that the screen was an HP model A4575A
with a selected resolution of 1280*1024 which works fine till now with previous
kernel 2.4.9 and 2.4.14.So what should be the right resolution?
Joel
Quoting Phil Anderson <[email protected]>:
Quoted 3 lines
Hi.
This invalid scan problem suggests to me that the box is putting out
a
Quoted 1 line
resolution/frequency that the monitor cannot support. The banner in
the
Quoted 1 line
muddle of the screen is a monitor on-screen-display error. I don't
know
Quoted 3 lines
about B180's but on my 712 this happened. In the boot loader firmware you
should be able to select resolutions -- I booted it on anothermonitor,
Quoted 2 lines
lovered the frequency and resolution, then switched back to the first monitor. So, i don't think that's a problem with the kernel, rather
the
Quoted 7 lines
settings of the box's STI and the limitations of the monitor you're using.
-phil
Quoted 8 lines
Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:
Hi all,
The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on
712)
Quoted 2 lines
But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of thescreen
Quoted 9 lines
and in
Quoted 1 line
background something like parasitical tv reception (white line
scanning
Quoted 6 lines
screen)... After some minutes it stop?
Thanks in advance for help,
Joel-------------------------------------------------
This mail sent through Tiscalinet WebmailQuoted 9 lines
Quoted 6 lines
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux===============================================================================
Quoted 6 lines
Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]
Quoted 9 lines
Quoted 4 lines
"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
[parisc-linux] 2.4.16-pa15 still POWERFAIL(was 2.4.16-pa12 Power failled)
Hi all,
Just to report that the problem persit on my B180 (even thought that changes was made on sym53c8xx but I do know if its regarding this problem).
Joel
Quoting [email protected]:
Quoted 93 lines
Hi all,
Sti consol is Ok now.
But receive on consol how many "POWERFAIL INTERRUPTION". I beleive it comes from scsi dirver sym53c8xx but not sure.
Thanks for all great job,
JoelQuoting [email protected]:
Quoted 1 line
You have right, I forget to mentionned that the screen was an HP
model
Quoted 2 lines
A4575A
with a selected resolution of 1280*1024 which works fine till nowwith
Quoted 12 lines
previous
kernel 2.4.9 and 2.4.14.So what should be the right resolution?
Joel
Quoting Phil Anderson <[email protected]>:
Quoted 3 lines
Hi.
This invalid scan problem suggests to me that the box is putting
out
Quoted 6 lines
a
Quoted 1 line
resolution/frequency that the monitor cannot support. The banner in
the
Quoted 1 line
muddle of the screen is a monitor on-screen-display error. I don't
know
Quoted 1 line
about B180's but on my 712 this happened. In the boot loader
firmware
Quoted 4 lines
Quoted 2 lines
you
should be able to select resolutions -- I booted it on anothermonitor,
Quoted 1 line
lovered the frequency and resolution, then switched back to the
first
Quoted 20 lines
Quoted 1 line
monitor. So, i don't think that's a problem with the kernel, rather
the
Quoted 7 lines
settings of the box's STI and the limitations of the monitor you're using.
-phil
Quoted 8 lines
Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:
Hi all,
The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on
712)
Quoted 2 lines
But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of thescreen
Quoted 2 lines
and in
Quoted 1 line
background something like parasitical tv reception (white line
Quoted 18 lines
Quoted 7 lines
scanning
Quoted 6 lines
screen)... After some minutes it stop?
Thanks in advance for help,
Joel-------------------------------------------------
This mail sent through Tiscalinet WebmailQuoted 9 lines
Quoted 6 lines
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux===============================================================================
Quoted 12 lines
Quoted 10 lines
Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
Quoted 9 lines
Quoted 3 lines
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
Re: [parisc-linux] 2.4.16-pa15 still POWERFAIL(was 2.4.16-pa12 Power failled)
Quoted 4 lines · On Wed, Dec 05, 2001 at 11:22:17AM +0100, [email protected] wrote:
Hi all,
Just to report that the problem persit on my B180 (even thought that changes was made on sym53c8xx but I do know if its regarding this problem).
This is a bit of debug from my a500, 2.4.16-pa13
request_irq(66, 000000001037fd90, 0x0, IO-SAPIC00-L1, 000000001009bc58) request_irq(66, 000000001037c590, 0x0, powerfail, 0000000000000000) request_irq(129, 0000000010374ed0, 0x4000000, sym53c8xx, 000000001fe98000) iosapic_interrupt(): irq 66 line 1 eoi fffffffffed30840, irq_num 129 POWERFAIL INTERRUPTION !
Don't claim to understand this, but it looks like "powerfail" has requested the wrong irq?
Richard
Re: [parisc-linux] 2.4.16-pa15 still POWERFAIL(was 2.4.16-pa12 Power failled)
Quoted 11 lines · Richard Hirst
On Wed, Dec 05, 2001 at 11:22:17AM +0100, [email protected] wrote:
This is a bit of debug from my a500, 2.4.16-pa13
request_irq(66, 000000001037fd90, 0x0, IO-SAPIC00-L1, 000000001009bc58)request_irq(66, 000000001037c590, 0x0, powerfail, 0000000000000000)request_irq(129, 0000000010374ed0, 0x4000000, sym53c8xx, 000000001fe98000)iosapic_interrupt(): irq 66 line 1 eoifffffffffed30840,irq_num129 POWERFAIL INTERRUPTION !Don't claim to understand this, but it looks like "powerfail" has requested the wrong irq?
Uhm. looks like a shared IRQ. that explains why I see it when the lan is ifconfig'd instead. Does powerfail need an exclusive IRQ in the CPU IRQ domain?
I never had the impression any of the HP9000 servers support a soft-power switch. Many of the older servers did support "Host powerfail" - but everything shipped since K-class does not. I think we will need to figure out how to disable this for PAT boxes and for DKR-class.
This reminds me:
For PAT PDC boxes, we need to write a "PAT Event Handler"
which has exclusive IRQ on CPU EIRR bit 19 (numbered bass ackwards). "we" means someone in HP. I don't think any of the documentation for PAT has been published (or will be published anytime soon *sigh*).
grant
[parisc-linux] 2.4.16-pa16 Solves POWERFAIL (was: 2.4.16-pa15 still POWERFAIL)
In reply to [email protected]The boot seems Ok now.
Congratulation,
Joel
Quoting [email protected]:
Quoted 115 lines
Hi all,
Just to report that the problem persit on my B180 (even thought that changes was
made on sym53c8xx but I do know if its regarding this problem).Joel
Quoting [email protected]:
Quoted 22 lines
Hi all,
Sti consol is Ok now.
But receive on consol how many "POWERFAIL INTERRUPTION". I beleive it comes from scsi dirver sym53c8xx but not sure.
Thanks for all great job,
JoelQuoting [email protected]:
Quoted 1 line
You have right, I forget to mentionned that the screen was an HP
model
Quoted 2 lines
A4575A
with a selected resolution of 1280*1024 which works fine till nowwith
Quoted 5 lines
previous
kernel 2.4.9 and 2.4.14.So what should be the right resolution?
Quoted 10 lines
Quoted 7 lines
Joel
Quoting Phil Anderson <[email protected]>:
Quoted 3 lines
Hi.
This invalid scan problem suggests to me that the box is putting
out
Quoted 2 lines
a
Quoted 1 line
resolution/frequency that the monitor cannot support. The banner
in
Quoted 2 lines
Quoted 2 lines
the
Quoted 1 line
muddle of the screen is a monitor on-screen-display error. I
don't
Quoted 9 lines
Quoted 2 lines
know
Quoted 1 line
about B180's but on my 712 this happened. In the boot loader
firmware
Quoted 4 lines
Quoted 2 lines
you
should be able to select resolutions -- I booted it on anothermonitor,
Quoted 1 line
lovered the frequency and resolution, then switched back to the
first
Quoted 1 line
Quoted 1 line
monitor. So, i don't think that's a problem with the kernel,
rather
Quoted 2 lines
Quoted 2 lines
the
Quoted 1 line
settings of the box's STI and the limitations of the monitor
you're
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
using.
-phil
Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:
Hi all,
The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested
on
Quoted 21 lines
Quoted 21 lines
Quoted 3 lines
712)
Quoted 2 lines
But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of thescreen
Quoted 9 lines
and in
Quoted 1 line
background something like parasitical tv reception (white line
scanning
Quoted 6 lines
screen)... After some minutes it stop?
Thanks in advance for help,
Joel-------------------------------------------------
This mail sent through Tiscalinet WebmailQuoted 7 lines
Quoted 6 lines
_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linuxQuoted 4 lines
Quoted 3 lines
Quoted 2 lines
===============================================================================
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
-------------------------------------------------
This mail sent through Tiscalinet WebmailQuoted 3 lines
Quoted 1 line
Quoted 10 lines
Quoted 4 lines
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
[parisc-linux] Trying C180/current CVS again
Hi, I'm once again trying to get my C180 booted, and I get a HPMC most of the way through boot. I've got the entire boot log, but it's rather long so it's not attached. I can make it available if that would be usefull.
Nick
Re: [parisc-linux] Trying C180/current CVS again
Quoted 3 lines · [email protected] wrote:
Hi, I'm once again trying to get my C180 booted, and I get a HPMC most of the way through boot. I've got the entire boot log, but it's rather long so it's not attached. I can make it available if that would be usefull.
Yes - it would be useful. Please just post a URL to it if you can.
grant
Re: [parisc-linux] Trying C180/current CVS again
Thanks, I'm already talking to a few ppl. I'll post any usefull info
Nick
Quoted 9 lines · Grant Grundler
Quoted 3 lines · [email protected] wrote:
Hi, I'm once again trying to get my C180 booted, and I get a HPMC most of the way through boot. I've got the entire boot log, but it's rather long so it's not attached. I can make it available if that would be usefull.
Yes - it would be useful. Please just post a URL to it if you can.
grant