Skip to contentSkip to conversation

Kernel 2.4.16-pa10

parisc-linux [email protected] 5 participants 11 messages Dec 3, 2001 – Dec 7, 2001

lore
Share & tools
lore
#0 lore raw

Hi all,

The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on 712) But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the screen and in background something like parasitical tv reception (white line scanning screen)... After some minutes it stop?
Thanks in advance for help,
Joel

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

#1 lore raw

Hi.

This invalid scan problem suggests to me that the box is putting out a resolution/frequency that the monitor cannot support. The banner in the muddle of the screen is a monitor on-screen-display error. I don't know about B180's but on my 712 this happened. In the boot loader firmware you should be able to select resolutions -- I booted it on another monitor, lovered the frequency and resolution, then switched back to the first monitor. So, i don't think that's a problem with the kernel, rather the settings of the box's STI and the limitations of the monitor you're using.

-phil

Quoted 18 lines · On Mon, 3 Dec 2001 [email protected] wrote:

Hi all,

The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on 712) But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the screen and in background something like parasitical tv reception (white line scanning screen)... After some minutes it stop?
Thanks in advance for help,
Joel

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Signature · 8 lines
===============================================================================

Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]

"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson
#2 lore raw

Re: [parisc-linux] Kernel 2.4.16-pa10: sti console brokrn?

You have right, I forget to mentionned that the screen was an HP model A4575A with a selected resolution of 1280*1024 which works fine till now with previous kernel 2.4.9 and 2.4.14.

So what should be the right resolution?

Joel

Quoting Phil Anderson <[email protected]>:

Quoted 32 lines

Hi.

This invalid scan problem suggests to me that the box is putting out a resolution/frequency that the monitor cannot support. The banner in the muddle of the screen is a monitor on-screen-display error. I don't know about B180's but on my 712 this happened. In the boot loader firmware you
should be able to select resolutions -- I booted it on another monitor, lovered the frequency and resolution, then switched back to the first monitor. So, i don't think that's a problem with the kernel, rather the settings of the box's STI and the limitations of the monitor you're using.

-phil

Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:

Hi all,

The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on

712)

Quoted 2 lines

But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the screen

and in

Quoted 1 line

background something like parasitical tv reception (white line

scanning

Quoted 4 lines

screen)... After some minutes it stop?
Thanks in advance for help,
Joel

Quoted 21 lines
Quoted 8 lines

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Signature · 8 lines
===============================================================================

Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]

"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

#3 lore raw

[parisc-linux] 2.4.16-pa12 Power failled (was: 2.4.16-pa10: sti console broken?)

Hi all,

Sti consol is Ok now.

But receive on consol how many "POWERFAIL INTERRUPTION". I beleive it comes from scsi dirver sym53c8xx but not sure.

Thanks for all great job,
Joel

Quoting [email protected]:

Quoted 69 lines

You have right, I forget to mentionned that the screen was an HP model A4575A
with a selected resolution of 1280*1024 which works fine till now with previous
kernel 2.4.9 and 2.4.14.

So what should be the right resolution?

Joel

Quoting Phil Anderson <[email protected]>:

Quoted 3 lines

Hi.

This invalid scan problem suggests to me that the box is putting out

a

Quoted 1 line

resolution/frequency that the monitor cannot support. The banner in

the

Quoted 1 line

muddle of the screen is a monitor on-screen-display error. I don't

know

Quoted 3 lines

about B180's but on my 712 this happened. In the boot loader firmware you
should be able to select resolutions -- I booted it on another

monitor,

Quoted 2 lines

lovered the frequency and resolution, then switched back to the first monitor. So, i don't think that's a problem with the kernel, rather

the

Quoted 7 lines

settings of the box's STI and the limitations of the monitor you're using.

-phil

Quoted 8 lines
Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:

Hi all,

The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on

712)

Quoted 2 lines

But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the

screen

Quoted 9 lines

and in

Quoted 1 line

background something like parasitical tv reception (white line

scanning

Quoted 6 lines

screen)... After some minutes it stop?
Thanks in advance for help,
Joel

-------------------------------------------------
This mail sent through Tiscalinet Webmail

(http://webmail.tiscali.be)

Quoted 9 lines
Quoted 6 lines

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

===============================================================================

Quoted 6 lines

Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]

Quoted 9 lines
Quoted 4 lines

"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

#4 lore raw

[parisc-linux] 2.4.16-pa15 still POWERFAIL(was 2.4.16-pa12 Power failled)

Hi all,

Just to report that the problem persit on my B180 (even thought that changes was made on sym53c8xx but I do know if its regarding this problem).

Joel

Quoting [email protected]:

Quoted 93 lines

Hi all,

Sti consol is Ok now.

But receive on consol how many "POWERFAIL INTERRUPTION". I beleive it comes from scsi dirver sym53c8xx but not sure.

Thanks for all great job,
Joel

Quoting [email protected]:

Quoted 1 line

You have right, I forget to mentionned that the screen was an HP

model

Quoted 2 lines

A4575A
with a selected resolution of 1280*1024 which works fine till now

with

Quoted 12 lines

previous
kernel 2.4.9 and 2.4.14.

So what should be the right resolution?

Joel

Quoting Phil Anderson <[email protected]>:

Quoted 3 lines

Hi.

This invalid scan problem suggests to me that the box is putting

out

Quoted 6 lines

a

Quoted 1 line

resolution/frequency that the monitor cannot support. The banner in

the

Quoted 1 line

muddle of the screen is a monitor on-screen-display error. I don't

know

Quoted 1 line

about B180's but on my 712 this happened. In the boot loader

firmware

Quoted 4 lines
Quoted 2 lines

you
should be able to select resolutions -- I booted it on another

monitor,

Quoted 1 line

lovered the frequency and resolution, then switched back to the

first

Quoted 20 lines
Quoted 1 line

monitor. So, i don't think that's a problem with the kernel, rather

the

Quoted 7 lines

settings of the box's STI and the limitations of the monitor you're using.

-phil

Quoted 8 lines
Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:

Hi all,

The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested on

712)

Quoted 2 lines

But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the

screen

Quoted 2 lines

and in

Quoted 1 line

background something like parasitical tv reception (white line

Quoted 18 lines
Quoted 7 lines

scanning

Quoted 6 lines

screen)... After some minutes it stop?
Thanks in advance for help,
Joel

-------------------------------------------------
This mail sent through Tiscalinet Webmail

(http://webmail.tiscali.be)

Quoted 9 lines
Quoted 6 lines

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

===============================================================================

Quoted 12 lines
Quoted 10 lines

Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]

"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson

Quoted 9 lines
Quoted 3 lines

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

#5 lore raw

Re: [parisc-linux] 2.4.16-pa15 still POWERFAIL(was 2.4.16-pa12 Power failled)

Quoted 4 lines · On Wed, Dec 05, 2001 at 11:22:17AM +0100, [email protected] wrote:

Hi all,

Just to report that the problem persit on my B180 (even thought that changes was made on sym53c8xx but I do know if its regarding this problem).

This is a bit of debug from my a500, 2.4.16-pa13

request_irq(66, 000000001037fd90, 0x0, IO-SAPIC00-L1, 000000001009bc58) request_irq(66, 000000001037c590, 0x0, powerfail, 0000000000000000) request_irq(129, 0000000010374ed0, 0x4000000, sym53c8xx, 000000001fe98000) iosapic_interrupt(): irq 66 line 1 eoi fffffffffed30840, irq_num 129 POWERFAIL INTERRUPTION !

Don't claim to understand this, but it looks like "powerfail" has requested the wrong irq?

Richard

#6 lore raw

Re: [parisc-linux] 2.4.16-pa15 still POWERFAIL(was 2.4.16-pa12 Power failled)

Quoted 11 lines · Richard Hirst

On Wed, Dec 05, 2001 at 11:22:17AM +0100, [email protected] wrote:
This is a bit of debug from my a500, 2.4.16-pa13

request_irq(66, 000000001037fd90, 0x0, IO-SAPIC00-L1, 000000001009bc58) request_irq(66, 000000001037c590, 0x0, powerfail, 0000000000000000) request_irq(129, 0000000010374ed0, 0x4000000, sym53c8xx, 000000001fe98000) iosapic_interrupt(): irq 66 line 1 eoi fffffffffed30840, irq_num 129 POWERFAIL INTERRUPTION !

Don't claim to understand this, but it looks like "powerfail" has requested the wrong irq?

Uhm. looks like a shared IRQ. that explains why I see it when the lan is ifconfig'd instead. Does powerfail need an exclusive IRQ in the CPU IRQ domain?

I never had the impression any of the HP9000 servers support a soft-power switch. Many of the older servers did support "Host powerfail" - but everything shipped since K-class does not. I think we will need to figure out how to disable this for PAT boxes and for DKR-class.

This reminds me:
For PAT PDC boxes, we need to write a "PAT Event Handler"
which has exclusive IRQ on CPU EIRR bit 19 (numbered bass ackwards). "we" means someone in HP. I don't think any of the documentation for PAT has been published (or will be published anytime soon *sigh*).

grant

#7 lore raw

[parisc-linux] 2.4.16-pa16 Solves POWERFAIL (was: 2.4.16-pa15 still POWERFAIL)

In reply to [email protected]

The boot seems Ok now.

Congratulation,
Joel

Quoting [email protected]:

Quoted 115 lines

Hi all,

Just to report that the problem persit on my B180 (even thought that changes was
made on sym53c8xx but I do know if its regarding this problem).

Joel

Quoting [email protected]:

Quoted 22 lines

Hi all,

Sti consol is Ok now.

But receive on consol how many "POWERFAIL INTERRUPTION". I beleive it comes from scsi dirver sym53c8xx but not sure.

Thanks for all great job,
Joel

Quoting [email protected]:

Quoted 1 line

You have right, I forget to mentionned that the screen was an HP

model

Quoted 2 lines

A4575A
with a selected resolution of 1280*1024 which works fine till now

with

Quoted 5 lines

previous
kernel 2.4.9 and 2.4.14.

So what should be the right resolution?

Quoted 10 lines
Quoted 7 lines

Joel

Quoting Phil Anderson <[email protected]>:

Quoted 3 lines

Hi.

This invalid scan problem suggests to me that the box is putting

out

Quoted 2 lines

a

Quoted 1 line

resolution/frequency that the monitor cannot support. The banner

in

Quoted 2 lines
Quoted 2 lines

the

Quoted 1 line

muddle of the screen is a monitor on-screen-display error. I

don't

Quoted 9 lines
Quoted 2 lines

know

Quoted 1 line

about B180's but on my 712 this happened. In the boot loader

firmware

Quoted 4 lines
Quoted 2 lines

you
should be able to select resolutions -- I booted it on another

monitor,

Quoted 1 line

lovered the frequency and resolution, then switched back to the

first

Quoted 1 line
Quoted 1 line

monitor. So, i don't think that's a problem with the kernel,

rather

Quoted 2 lines
Quoted 2 lines

the

Quoted 1 line

settings of the box's STI and the limitations of the monitor

you're

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

using.

-phil

Quoted 3 lines · On Mon, 3 Dec 2001 [email protected] wrote:

Hi all,

The kernel 2.4.16-pa10 run roughtly on my B180 (not yet tested

on

Quoted 21 lines
Quoted 21 lines
Quoted 3 lines

712)

Quoted 2 lines

But STI console semms broken:
A large banner with "INVALID SCAN FREQ." in the middle of the

screen

Quoted 9 lines

and in

Quoted 1 line

background something like parasitical tv reception (white line

scanning

Quoted 6 lines

screen)... After some minutes it stop?
Thanks in advance for help,
Joel

-------------------------------------------------
This mail sent through Tiscalinet Webmail

(http://webmail.tiscali.be)

Quoted 7 lines
Quoted 6 lines

_______________________________________________
parisc-linux mailing list
[email protected]
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

Quoted 4 lines
Quoted 3 lines
Quoted 2 lines

===============================================================================

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

Phil Anderson
UNIX Systems Administrator
[email protected]
[email protected]

Quoted 8 lines
Quoted 8 lines
Quoted 4 lines

"Go CRAZY? Don't mind if I do! Woowoowoowoo!" -Homer Simpson

-------------------------------------------------
This mail sent through Tiscalinet Webmail

(http://webmail.tiscali.be)

Quoted 3 lines
Quoted 1 line
Quoted 10 lines
Quoted 4 lines

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)

#8 lore raw

[parisc-linux] Trying C180/current CVS again

Hi, I'm once again trying to get my C180 booted, and I get a HPMC most of the way through boot. I've got the entire boot log, but it's rather long so it's not attached. I can make it available if that would be usefull.
Nick

#9 lore raw

Re: [parisc-linux] Trying C180/current CVS again

Quoted 3 lines · [email protected] wrote:

Hi, I'm once again trying to get my C180 booted, and I get a HPMC most of the way through boot. I've got the entire boot log, but it's rather long so it's not attached. I can make it available if that would be usefull.

Yes - it would be useful. Please just post a URL to it if you can.

grant

#10 lore raw

Re: [parisc-linux] Trying C180/current CVS again

Thanks, I'm already talking to a few ppl. I'll post any usefull info
Nick

Quoted 9 lines · Grant Grundler
Quoted 3 lines · [email protected] wrote:

Hi, I'm once again trying to get my C180 booted, and I get a HPMC most of the way through boot. I've got the entire boot log, but it's rather long so it's not attached. I can make it available if that would be usefull.

Yes - it would be useful. Please just post a URL to it if you can.

grant