Skip to contentSkip to conversation

stumped with APM suspend/resume problem going from 2.4.5 -> 2.4.17

DISCUSSION Thomas Hood 3 participants 4 messages Feb 3, 2002 – Feb 7, 2002

lore
Share & tools
lore
#0 lore raw
Quoted 6 lines

... ever since I got a USB scanner and camera ... "apm -s" and
then resume causes the machine to hang. On resume, even outside of X, the screen blanks or appears but doesn't respond to keyboard input. No oops, no messages, no nothing. The only choice I have at that point is a hard reset.

This sounds similar to an earlier report:
http://marc.theaimsgroup.com/?l=linux-kernel&m=101224645320919&w=2

Quoted 7 lines

If the computer is put to rest
(apm -s) with the (logitech) usb mouse plugged in, the PC doesn't recover at all, going into a reboot sequence. If the mouse is unplugged before "apm -s", everything goes well...
No problem as well if the mouse is connected to the PS2 port.

Sounds like a USB problem to me. It would be most useful to know exactly which kernels have the problem and which ones don't.

--
Thomas Hood

#1 lore raw

thanks for your reply.

unfortunately, my apm problems happen even with no devices (pcmcia or usb) pluggin in.

Quoted 18 lines · Thomas Hood
Quoted 6 lines

... ever since I got a USB scanner and camera ... "apm -s" and
then resume causes the machine to hang. On resume, even outside of X, the screen blanks or appears but doesn't respond to keyboard input. No oops, no messages, no nothing. The only choice I have at that point is a hard reset.

This sounds similar to an earlier report:
http://marc.theaimsgroup.com/?l=linux-kernel&m=101224645320919&w=2

Quoted 7 lines

If the computer is put to rest
(apm -s) with the (logitech) usb mouse plugged in, the PC doesn't recover at all, going into a reboot sequence. If the mouse is unplugged before "apm -s", everything goes well...
No problem as well if the mouse is connected to the PS2 port.

Quoted 6 lines

Sounds like a USB problem to me. It would be most useful to know exactly which kernels have the problem and which ones don't.

--
Thomas Hood

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

#2 lore raw
Quoted 2 lines · Matt

unfortunately, my apm problems happen even with no devices (pcmcia or usb) pluggin in.

I had the same problem as you have when my battery was near death. Can you try installing a fresh battery?

#3 lore raw
In reply to Thomas Hood

Quoting Thomas Hood <[email protected]>:

Quoted 18 lines
Quoted 6 lines

... ever since I got a USB scanner and camera ... "apm -s" and
then resume causes the machine to hang. On resume, even outside of X, the screen blanks or appears but doesn't respond to keyboard input. No oops, no messages, no nothing. The only choice I have at that point is a hard reset.

This sounds similar to an earlier report:
http://marc.theaimsgroup.com/?l=linux-kernel&m=101224645320919&w=2

Quoted 7 lines

If the computer is put to rest
(apm -s) with the (logitech) usb mouse plugged in, the PC doesn't recover at all, going into a reboot sequence. If the mouse is unplugged before "apm -s", everything goes well...
No problem as well if the mouse is connected to the PS2 port.

Quoted 8 lines

Sounds like a USB problem to me. It would be most useful to know exactly which kernels have the problem and which ones don't.

--
Thomas Hood

Hi there.

I've noticed the problem with kernels 2.4.7-10, as well as 2.4.9-13 and 2.4.17.

As I was not able to fix it, I decided to the mouse on PS/2

Thx

Luis

-----------------------------------------------------
This mail sent through IMP: http://web.horde.org/imp/