stumped with APM suspend/resume problem going from 2.4.5 -> 2.4.17
Quoted 6 lines
... ever since I got a USB scanner and camera ... "apm -s" and
then resume causes the machine to hang. On resume, even outside of X, the screen blanks or appears but doesn't respond to keyboard input. No oops, no messages, no nothing. The only choice I have at that point is a hard reset.
This sounds similar to an earlier report:
http://marc.theaimsgroup.com/?l=linux-kernel&m=101224645320919&w=2
Quoted 7 lines
If the computer is put to rest
(apm -s) with the (logitech) usb mouse plugged in, the PC doesn't recover at all, going into a reboot sequence. If the mouse is unplugged before "apm -s", everything goes well...
No problem as well if the mouse is connected to the PS2 port.
Sounds like a USB problem to me. It would be most useful to know exactly which kernels have the problem and which ones don't.
--
Thomas Hood
thanks for your reply.
unfortunately, my apm problems happen even with no devices (pcmcia or usb) pluggin in.
Quoted 18 lines · Thomas Hood
Quoted 6 lines
... ever since I got a USB scanner and camera ... "apm -s" and
then resume causes the machine to hang. On resume, even outside of X, the screen blanks or appears but doesn't respond to keyboard input. No oops, no messages, no nothing. The only choice I have at that point is a hard reset.This sounds similar to an earlier report:
http://marc.theaimsgroup.com/?l=linux-kernel&m=101224645320919&w=2Quoted 7 lines
If the computer is put to rest
(apm -s) with the (logitech) usb mouse plugged in, the PC doesn't recover at all, going into a reboot sequence. If the mouse is unplugged before "apm -s", everything goes well...
No problem as well if the mouse is connected to the PS2 port.
Quoted 6 lines
Sounds like a USB problem to me. It would be most useful to know exactly which kernels have the problem and which ones don't.
--
Thomas Hood
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Quoted 2 lines · Matt
unfortunately, my apm problems happen even with no devices (pcmcia or usb) pluggin in.
I had the same problem as you have when my battery was near death. Can you try installing a fresh battery?
Quoting Thomas Hood <[email protected]>:
Quoted 18 lines
Quoted 6 lines
... ever since I got a USB scanner and camera ... "apm -s" and
then resume causes the machine to hang. On resume, even outside of X, the screen blanks or appears but doesn't respond to keyboard input. No oops, no messages, no nothing. The only choice I have at that point is a hard reset.This sounds similar to an earlier report:
http://marc.theaimsgroup.com/?l=linux-kernel&m=101224645320919&w=2Quoted 7 lines
If the computer is put to rest
(apm -s) with the (logitech) usb mouse plugged in, the PC doesn't recover at all, going into a reboot sequence. If the mouse is unplugged before "apm -s", everything goes well...
No problem as well if the mouse is connected to the PS2 port.
Quoted 8 lines
Sounds like a USB problem to me. It would be most useful to know exactly which kernels have the problem and which ones don't.
--
Thomas Hood
Hi there.
I've noticed the problem with kernels 2.4.7-10, as well as 2.4.9-13 and 2.4.17.
As I was not able to fix it, I decided to the mouse on PS/2
Thx
Luis
-----------------------------------------------------
This mail sent through IMP: http://web.horde.org/imp/