Skip to contentSkip to conversation

2.5.39 with contest 0.41

BENCHMARK Paolo Ciarrocchi 2 participants 2 messages Sep 29, 2002

lore
Share & tools
lore
#0 lore raw

From: Con Kolivas <[email protected]>
[...]

Quoted 36 lines
Quoted 25 lines

process_load:

Kernel                  Time            CPU             Ratio
2.4.19                  200.43          60%             1.51
2.4.19                  203.11          60%             1.53
2.4.19                  203.97          59%             1.53
2.5.38-mm2              194.42          69%             1.46
2.5.38-mm2              195.19          69%             1.47
2.5.38-mm2              207.36          64%             1.56
2.5.39                  190.44          70%             1.43
2.5.39                  191.37          70%             1.44
2.5.39                  193.60          69%             1.45

io_load:

Kernel                  Time            CPU             Ratio
2.4.19                  486.58          27%             3.66
2.4.19                  593.72          22%             4.46
2.4.19                  637.61          21%             4.79
2.5.38-mm2              232.35          61%             1.75
2.5.38-mm2              237.83          57%             1.79
2.5.38-mm2              274.39          50%             2.06
2.5.39                  242.98          57%             1.83
2.5.39                  294.52          50%             2.21
2.5.39                  328.01          42%             2.46

mem_load:

Quoted 10 lines
Kernel                  Time            CPU             Ratio
2.4.19                  172.24          78%             1.29
2.4.19                  174.74          77%             1.31
2.4.19                  174.87          77%             1.31
2.5.38-mm2              165.53          82%             1.24
2.5.38-mm2              170.00          80%             1.28
2.5.38-mm2              171.96          79%             1.29
2.5.39                  167.92          81%             1.26
2.5.39                  170.80          80%             1.28
2.5.39                  172.68          79%             1.30
Quoted 4 lines

Quick statistical analysis:
Noload, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2

ProcessLoad, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2

Why ?
If look at the numbers I assume that 2.5.39 is faster then 2.4.19. Am I missing something?

I'll run further test...

Ciao,
Paolo

Signature · 4 lines
Get your free email from www.linuxmail.org 


Powered by Outblaze
#1 lore raw

Quoting Paolo Ciarrocchi <[email protected]>:

Quoted 38 lines

From: Con Kolivas <[email protected]>
[...]

Quoted 36 lines
Quoted 35 lines

process_load:

Kernel                  Time            CPU             Ratio
2.4.19                  200.43          60%             1.51
2.4.19                  203.11          60%             1.53
2.4.19                  203.97          59%             1.53
2.5.38-mm2              194.42          69%             1.46
2.5.38-mm2              195.19          69%             1.47
2.5.38-mm2              207.36          64%             1.56
2.5.39                  190.44          70%             1.43
2.5.39                  191.37          70%             1.44
2.5.39                  193.60          69%             1.45

io_load:

Kernel                  Time            CPU             Ratio
2.4.19                  486.58          27%             3.66
2.4.19                  593.72          22%             4.46
2.4.19                  637.61          21%             4.79
2.5.38-mm2              232.35          61%             1.75
2.5.38-mm2              237.83          57%             1.79
2.5.38-mm2              274.39          50%             2.06
2.5.39                  242.98          57%             1.83
2.5.39                  294.52          50%             2.21
2.5.39                  328.01          42%             2.46

mem_load:

Kernel                  Time            CPU             Ratio
2.4.19                  172.24          78%             1.29
2.4.19                  174.74          77%             1.31
2.4.19                  174.87          77%             1.31
2.5.38-mm2              165.53          82%             1.24
2.5.38-mm2              170.00          80%             1.28
2.5.38-mm2              171.96          79%             1.29
2.5.39                  167.92          81%             1.26
2.5.39                  170.80          80%             1.28
2.5.39                  172.68          79%             1.30
Quoted 7 lines
Quoted 4 lines

Quick statistical analysis:
Noload, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2

ProcessLoad, 2.5.39 is slower than 2.4.19 and same as 2.5.38-mm2

Why ?
If look at the numbers I assume that 2.5.39 is faster then 2.4.19. Am I missing something?

Sorry, typo should read 2.5.39 is faster than 2.4.19 and same as 2.5.38-mm2

Quoted 1 line

I'll run further test...

Not really needed. I'm convinced the difference is there, and the people who can act on the data probably will be happy with that much information too. Some are less satisfied with the quality of the data unless there is firm statistical data to support the hypothesis. Your time is better spent on other things.

Con